Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Metallic Raceway Supplier

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of metallic raceways, specifically NSN 5975015564139, to support DLA Weapons Support LSO Combat Vehicles and Armament contracts. The supplier is responsible for manufacturing or procuring the units in accordance with the DLA Master List of Technical and Quality Requirements RA001, ensuring all items are marked per MIL-STD-129 and palletized according to RP001. The contract requires the delivery of two units FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. To be eligible, the contractor must maintain CMMC Level 2 Self-Assessment and adhere to RD002 compliance standards. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026, under NAICS code 335932.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

335932 - Noncurrent-Carrying Wiring Device Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-27-T-0106.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RACEWAY, METALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies metallic raceways for prime contractors delivering DLA Weapons Support LSO Combat Vehicles and Armament contracts. Manufactures or procures NSN 5975015564139 raceways per DLA Master List of Technical and Quality Requirements (RA001). Performs marking per MIL-STD-129 and palletization per RP001. Requires CMMC Level 2 Self-Assessment and RD002 compliance. Delivers two units FOB Origin to DLA Distribution DDSP New Cumberland Facility, PA.

Similar Contracts

Same NAICS industry code

Manufacturing of Electrical Equipment Mounting BasesThis subcontract involves the manufacture of five specialized electrical mounting bases for the Department of Defense, specifically supporting DLA Weapons Support ASC Commodities Division supply contracts. The fabrication must strictly adhere to the technical data packages for Rockwell Collins P/N 822-0792-001 and NSN 5975-01-444-7929, utilizing precision machining to meet critical application tolerances and ensuring all materials used are mercury-free. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 335932. Due to the nature of the work, the contractor is required to maintain CMMC Level 2 and DFARS 252.204-7012 compliance to ensure proper handling of controlled unclassified information. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATING COMPOUND, EL

Solicitation # SPE4A6-27-T-0719

Solicitation SPE4A6-27-T-0719 is for the procurement of electrical insulating compound, identified by NSN 5970-01-013-8611. This commercial off-the-shelf item must comply with MIL-I-46058C and QPL-46058-87. The requirement is split across three CLINs, each for 3 quarts, with a total quantity of 9 quarts. Deliveries are set for FOB Destination with required delivery dates ranging from September 29, 2026, to October 2, 2026, across three distinct locations: Tinker AFB, Oklahoma; the USS Makin Island (FPO AP); and Naples, Italy. The product is designated as Type I with a non-extendable shelf life of 18 months. As a DOT Class 3 hazardous material (Resin Solution UN1866 PG III), the contract mandates strict adherence to safety and shipping regulations. Contractors must provide SDS and OSHA Hazard Warning labels for approval by technical personnel prior to award. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, including Special Marking Code 32. Inspection and acceptance will occur at the point of origin. The contract incorporates various FAR and DFARS clauses, including requirements for basic safeguarding of contractor information systems and compliance with the Buy American Act and Berry Amendment. Payment requests and receiving reports must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATING COMPOUND KI

Solicitation # SPE4A6-27-T-1061

Solicitation SPE4A6-27-T-1061 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of three cans of electrical insulating compound kit, specifically Elantas North America LLC P/N CONAP PR-1167 Urethane Primer (NSN 5970-01-607-2302). Each unit of issue consists of a 2.0-pound can. The required delivery date is October 31, 2027, with a need ship date of June 3, 2027, shipping FOB Origin to DLA Distribution San Joaquin in Tracy, California. This item is classified as a Commercial Off-the-Shelf product and has no shelf life requirement. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, including specific sampling methods under MIL-STD-1916 or ASQ H1331. Because the material may be hazardous, the contractor must provide Safety Data Sheets and OSHA Hazard Warning labels for approval by technical personnel prior to award. Packaging must comply with MIL-STD-129 and RP001, with hazardous materials following IP025 or ASTM D3951 standards. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding sustainable products, cybersecurity, and the Buy American Act.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MOUNTING BASE, ELECTRIC

Solicitation # SPE4A6-27-T-0897

Solicitation SPE4A6-27-T-0897, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of five electrical equipment mounting bases, identified as NSN 5975-01-444-7929 and Rockwell Collins part number 822-0792-001. This is designated as a critical application item. The required delivery date is October 31, 2027, with a need ship date of April 23, 2027, and delivery terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances for acceptance. Key compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information per DFARS 252.204-7012, and a prohibition on the intentional addition of mercury. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-27-T-1021

Solicitation SPE4A6-27-T-1021, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 20 units of electrical insulation sleeving, specifically TE Connectivity Corporation part number 562A032-3/42-0 (NSN 5970-01-616-7925). The contract is a fixed-price acquisition with delivery required within 234 days, featuring a need ship date of June 7, 2027, and a final required delivery date of October 31, 2027. Shipping is FOB Origin, with both inspection and acceptance occurring at the origin. The items are to be delivered to DLA Distribution Albany in Georgia under the First Destination Transportation program. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for labeling and ASTM D3951 for packaging, with DLA Master List requirements taking precedence. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment requests. The solicitation is open to various small business categories, utilizes the HUBZone price evaluation preference, and prohibits the use of additive manufacturing unless specifically authorized. Compliance with the Buy American Act, Berry Amendment, and various DFARS cybersecurity and hazardous material regulations is mandatory.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATING VARNISH, ELE

Solicitation # SPE4A6-27-T-0707

Solicitation SPE4A6-27-T-0707 is a fixed-price requirement issued by the DLA Weapons Support ASC Commodities Division for the procurement of one gallon of electrical insulating varnish, identified by NSN 5970-00-161-7232. This commercial off-the-shelf item is designated as a critical application item with a non-extendable shelf life of 12 months. Delivery is required within five days after receipt of order, with the destination for inspection and acceptance being the Supervisor of Shipbuilding Gulf in Pascagoula, Mississippi, and the freight delivery point at the USS Jeremiah Denton DDG129 in Gulfport, Mississippi. Because the material is classified as hazardous (HMIC P, UN1263, Class 3, PG III), the contractor must adhere to strict safety and packaging protocols. Requirements include the submission of an approved Safety Data Sheet, Hazard Warning Labels, and a completed SDS Transmittal Form to the DLA Aviation HMIRS office prior to award. The product must be supplied in a U.N IP.3 metal can within a U.N certified 4G fiberboard box containing absorbent material. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and the contractor must utilize the Wide Area WorkFlow system for all electronic payment requests and receiving reports.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-27-T-0720

Solicitation SPE4A6-27-T-0720 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of electrical insulation sleeving, identified by NSN 5970-01-044-4531. The requirement is for 4,000 feet of material, which must be supplied on a reel or spool. This is a critical application item that must be produced by an accredited manufacturer or assembling distributor listed on the Performance Review Institute Qualified Manufacturer List or Qualified Products List. The product is classified as a Type 2 Code 4 item with an extendable shelf life of 12 months. Technical compliance requires adherence to SAE AS23053/1 and SAE AS23053C standards. Delivery is required within five days after receipt of order, with FOB Origin terms and destination inspection and acceptance. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically utilizing special marking code 33 for shelf life. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Contractors are required to use the Wide Area WorkFlow system for invoicing and must comply with various federal regulations, including the Buy American Act and prohibitions on the intentional addition of mercury.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

RACEWAY, METALLIC

Solicitation # SPE7L4-27-T-0106

Solicitation SPE7L4-27-T-0106 is a fixed-price procurement issued by the DLA Weapons Support LSO Combat Vehicles and Armament for two units of metallic raceway, identified by NSN 5975015564139. The contract specifies a delivery timeline of 289 days, with a need ship date of August 5, 2027, and an original required delivery date of October 31, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, MIL-STD-129 for marking and labeling, and RP001 for palletization. Packaging requirements vary by material safety, requiring compliance with IP025 for hazardous materials or ASTM D3951 for non-hazardous items. Compliance mandates include a CMMC Level 2 Self-Assessment, adherence to the Buy American Act, and the use of the Wide Area WorkFlow system for invoicing and payment. All quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

INSULATING COMPOUND KI

Solicitation # SPE4A0-27-T-0111

Solicitation SPE4A0-27-T-0111 is for the procurement of one electrical insulating compound kit, identified as NSN 5970002536021 and Dow Silicones Corporation part number RTV-3120 + RTV-3010-S. This commercial off-the-shelf item is designated as a critical application item. Each one-pound kit must consist of one 1-lb can of RTV-3120 base and one 0.1-lb tube of RTV-3010-S catalyst. The item has a non-extendable shelf life of 12 months, with a reduced requirement of 50 percent remaining shelf life upon receipt by the government. The contract mandates strict adherence to hazardous material protocols, requiring the submission and approval of Safety Data Sheets and OSHA Hazard Warning Labels by technical personnel prior to award. Packaging must comply with MIL-STD-2073-1E and RP001, requiring the kit components to be housed in a single cushioned box with a detailed contents list and marked according to MIL-STD-129. Delivery is set for FOB Origin with a required delivery date of October 2, 2026, to Tinker AFB, Oklahoma. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331. Payment will be processed electronically via the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

STRAP, TIE DOWN, ELECTRI

Solicitation # SPE4A7-27-T-0377

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-27-T-0716

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M8-27-T-0066

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Seal Assembly Manufacturing and SupplyThis subcontract involves the manufacture and supply of 11 completed seal assemblies for prime contractors supporting DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for sourcing or producing parts that strictly adhere to BAE Systems P/N LD419923-0003 and NSN 1440-00-863-8207 specifications. Quality assurance and logistics must comply with MIL-STD-1916 for sampling and MIL-STD-2073-1E for packaging. The performance of this contract takes place in New Cumberland, Pennsylvania. Due to the nature of the work, the provider must be capable of handling Covered Defense Information and must complete a CMMC Level 2 self-assessment. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Helical Gears (NSN 3020000805865)This subcontract involves the manufacture and supply of seven precision steel helical gears under NSN 3020000805865 for the DLA Weapons Support LSO Combat Vehicles and Armament. The gears are specifically designed for Stewart and Stevenson Model 16-114D001 Diesel Engines and must be machined with 68 teeth, a 0.76070 diametral pitch, and a 20-degree pressure angle. The project requires strict adherence to ANSI/NCSL Z540-1-1994 calibration standards and MIL-STD-130 marking requirements. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 19, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for processing 2,000 units using military-specification materials and labeling equipment, ensuring all items are packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. The scope of work includes preparing all shipments for FOB Origin delivery to DLA Distribution in New Cumberland, Pennsylvania. This requirement falls under NAICS code 488510, with a response deadline set for October 19, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacture of Clamp Wrenches (NSN 1005131183547)This subcontract involves the manufacture of 2,000 specialized clamp wrenches, part number 3530560030, for the DLA Weapons Support LSO Combat Vehicles and Armament. The project requires the use of precision machining equipment to produce the units, with a strict prohibition against the use of additive manufacturing. All production must align with the DLA Master List of Technical and Quality Requirements to ensure strict adherence to military specifications. The contract mandates full compliance with domestic sourcing regulations, specifically the Berry Amendment and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must have responded by the deadline of October 19, 2026, to fulfill the delivery of the finished hardware under NAICS code 333310.

Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

Supply of Electrical Leads (NSN 5995-01-723-4418)This subcontract involves the supply of six specialized electrical leads under NSN 5995-01-723-4418 for the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for manufacturing or sourcing the leads to meet General Dynamics Land Systems Inc. part number RS2244277 specifications. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 335999. Strict quality and logistics standards are required for this engagement. The contractor must perform quality sampling in accordance with MIL-STD-1916 or ASQ H1331, while packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Fabrication and Supply of Vehicular Operation PanelsThis subcontract involves the fabrication and supply of three finished vehicular operation panels for prime contractors supporting DLA Weapons Support. The panels must be manufactured according to NSN 2510-01-566-9715 and P/N 4299978, ensuring full adherence to the DLA Master List of Technical and Quality Requirements RA001. All items must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards and delivered to DLA Distribution DDSP New Cumberland. The contractor is required to maintain strict compliance with the Buy American Act and the Berry Amendment. This procurement falls under NAICS code 332999 and is managed by the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. Responses to the solicitation are due by October 19, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Industrial Coating and Surface TreatmentThis subcontract for Industrial Coating and Surface Treatment supports prime contractors on DLA Weapons Support projects under the Department of Defense. The scope of work involves applying industrial plating or paint to sprocket wheels to deliver corrosion-resistant components. All surface treatments must be performed without the use of Class I ozone-depleting chemicals and must strictly adhere to MIL-STD-2073-1E packaging and preservation standards. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties should note the posting date of October 7, 2026, with a response deadline set for October 19, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

High-Strength Alloy Steel SupplyThis subcontract, titled High-Strength Alloy Steel Supply, involves the provision of certified raw alloy steel billets or forgings to prime contractors supporting DLA Weapons Support projects. The primary objective is the delivery of certified raw material stock specifically intended for the production of sprocket wheels. All supplied materials must strictly comply with the Buy American Act and be guaranteed free of mercury and Class I ozone-depleting chemicals. To ensure quality and compliance, the supplier is required to provide Material Test Reports that verify the metallurgical properties of the steel. The contract is associated with NAICS code 331110 and is managed under the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, with the place of performance located in New Cumberland.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Sprocket Wheel ManufacturingThis subcontract involves the precision machining and fabrication of two sprocket wheels for prime contractors supporting DLA Weapons Support. The project requires parts to be manufactured to NSN 3020013029249 specifications as Critical Application Items, utilizing CNC machining and grinding in accordance with RA001 technical requirements. Quality assurance must be maintained through sampling per MIL-STD-1916 or ASQ H1331 standards. The contract is issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament agency, with performance taking place in New Cumberland. The solicitation was posted on October 7, 2026, with a response deadline of October 19, 2026. The work falls under NAICS code 333612.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE

Supply of Vehicle Window Regulators (NSN 2540016738142)This subcontract involves the procurement or manufacture of 2,000 passenger-side vehicle window regulators for prime contractors supporting the Department of Defense DLA Weapons Support LSO Combat Vehicles and Armament. The required units must match Deere and Company part number AM146830 and NSN 2540016738142. All deliverables must be shipped FOB Origin and strictly adhere to additive manufacturing prohibitions. Compliance requirements include packaging according to ASTM D3951 and RP001 standards, with labeling performed per MIL-STD-129. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336390. Interested parties must have responded by the deadline of October 19, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Supply of NAS1251 Ring Bolt / Drawbar CouplerThis subcontract involves the procurement of one Ring Bolt Drawbar Coupler for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is responsible for manufacturing or sourcing the bolt in accordance with National Aerospace Standard 80205 P/N NAS1251 and must adhere to DLA quality requirements RA001, RP001, and RQ011. The final product, identified by NSN 5306016509044, is to be delivered to Boise, Idaho. Strict production and logistics standards apply to this agreement, including a prohibition on the use of Class I Ozone Depleting Chemicals during manufacturing. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 specifications. The opportunity is categorized under NAICS code 332722, with a response deadline set for October 19, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support projects under the Department of Defense. The scope of work involves performing military-grade packaging, marking, and palletization in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Specific preservation requirements include the application of QWP:.001, PRES MTHD:.20, CLNG/DRY:.1, and WRAP MAT:.GB using industrial marking equipment and MIL-SPEC materials to ensure shipments are ready for FOB Origin pickup. The project is managed by the DLA Weapons Support LSO Combat Vehicles and Armament and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 19, 2026. The contract is categorized under NAICS code 488510, focusing on the delivery of fully compliant, packaged shipments that meet rigorous military specifications.

Freight Transportation Arrangement

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS