This Solicitation opportunity from Department Of Defense was posted on June 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
METER, FLUID FLOW, EL
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract pertains to the procurement of four units of a fluid flow meter, model RCM-7307 manufactured by KOBOLD INSTRUMENTS INC with CAGE code 1QA83, designated by NSN 6680016460122. The meter must be configured for horizontal left flow with operating parameters of 0.6 to 6.0 gallons per minute, a temperature range of 40°F to 100°F, a maximum pressure limit of 75 PSI, and must be designed exclusively for use with water. The item is source-controlled, meaning it must be manufactured and tested using limited rights data that only qualified vendors can access, and vendors must either possess this data or demonstrate traceability to approved sources. Quality and technical requirements are defined by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and take precedence over other standards. Acceptance sampling follows MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major, and zero non-conformances are required in any sampling lot unless otherwise stated. The item must be packaged in accordance with ASTM D3951 and marked per MIL-STD-129, with palletization complying with RP001 DLA Packaging Requirements. Delivery is required within 152 days after the date of order, FOB Origin, to the DLA Distribution Facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination per FAR 52.246-2, and payment submissions must utilize the Wide Area Workflow system, with appropriate receiving reports and invoices submitted as required. The contract includes cybersecurity compliance under NIST SP 800-171, adherence to the Buy American Act and Berry Amendment, submission of Safety Data Sheets per 29 CFR 1910.1200, compliance with anti-trafficking provisions, and mandatory representation in the System for Award Management. All quotes must be submitted via DIBBS by the deadline of June 8, 2026, and the solicitation is not a small business set-aside. The contracting officer is Kierra Young, and the procurement is issued under the Department of Defense’s ASC
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
METER,FLUID FLOW,EL
PART NUMBER REQUIRED:
CAGE 1QA83 RCM-7307 with Horizonal Flow to the LEFT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
IDENTIFY TO:
OPERATING PARAMETERS:
FLOW MEASUREMENT: 0.6 TO 6.0 GPM
OPERATING TEMPERATURE: 40F TO 100F
MAXIMUM PRESSURE; 75 PSI
OPERATING FLUID: WATER
FLOW DIRECTION: HORIZONTAL LEFT
KOBOLD INSTRUMENTS INC 1QA83 P/N RCM-7307
KOBOLD INSTRUMENTS INC 1QA83 P/N RCM-7307-L-SST
SPE4A5-26-T-197K
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016753518 0001 EA 4.000
NSN/MATERIAL:6680016460122
DELIVERY (IN DAYS):0152
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/08/2026
SPE4A5-26-T-197K
SECTION B
PR: 7016753518 PRLI: 0001 CONT’D
Original Required Delivery Date:01/08/2027
SPE4A5-26-T-197K NSN/Part Number: 6680-01-646-0122 Quantity: 4 EA Purchase Request: 7016753518QTY: 4 Delivery: 152 days ADO
More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS