Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Aviation Packaging Services

Active

Federal

Response Deadline11/23/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Aviation Packaging Services supports NAVSUP Weapon System Support projects by providing specialized packaging and marking for overhauled aviation units. The scope of work requires strict adherence to MIL-STD-2073 standards and the execution of Performance Oriented Packaging for hazardous materials in compliance with 49 CFR and international modal regulations. The contractor is responsible for delivering units ready for air shipment, which includes providing DOT-registered testing, test certificates, and the necessary Shipper's Declaration for Dangerous Goods. The project is managed under the Department of Defense and will be performed in Philadelphia. Interested parties should note that the response deadline is November 23, 2026. The contract falls under NAICS code 333613 and is specifically designed to support prime contractors in meeting rigorous military and safety requirements for the transport of aviation components.

General Info

MIL-SPEC aviation packaging services for NAVSUP in Philadelphia, deadline November 23, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

Philadelphia, PA, USA

Set-Aside

NONE

Documents

This scope was carved out of N00383-25-Q-D147.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Solicitation QTY 1 7RH 1680 015855262 P8

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 08:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking for overhauled aviation units for prime contractors on NAVSUP Weapon System Support projects. Packages units per MIL-STD-2073 and executes Performance Oriented Packaging (POP) for hazardous materials per 49 CFR and international modal regulations. Provides DOT-registered testing, test certificates, and Shipper's Declaration for Dangerous Goods (SDDG). Delivers a packaged unit ready for air shipment.

Similar Contracts

Same NAICS industry code

Solicitation # N0010423QFA30

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a cable assembly designated as Special Emphasis Level I material. Due to its use in crucial shipboard systems, the material is subject to stringent quality controls, including a mandatory First Article Test and a comprehensive Certificate of Compliance. The contractor must maintain a quality system compliant with ISO-9001 or MIL-I-45208 and adhere to specific toxicity and flammability requirements. The procurement is a total small business set-aside, with award based on a single-award selection where past performance is weighted more heavily than price. The delivery schedule requires the submission of all certification data 20 days prior to delivery, with a final material delivery timeline of 300 days. All shipments are FOB Destination, and invoicing must be processed through the Wide Area Workflow system. Technical requirements include adherence to various NAVSEA drawings and specifications, with specific prohibitions against mercury contamination. Quality assurance is performed at the source by the government, and the contractor is responsible for maintaining detailed inspection and test records.

Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Marine Mechanical Rigging and Steering ContractorThe Marine Mechanical Rigging and Steering Contractor subcontract involves the physical removal of existing propulsion and the installation of new engines for boat repower projects managed by the Confederated Tribes of the Colville Reservation. The scope of work includes decommissioning Honda BF250A engines, mounting new engines with marine stainless steel hardware and sealant, and interfacing the propulsion systems with SeaStar PA1315-2 Marine Hydraulic PRO Power Assist Steering Units. Qualified contractors must hold a marine mechanical certification to deliver fully installed propulsion and steering systems. This opportunity was posted on October 20, 2026, with a response deadline of November 13, 2026. The project falls under NAICS code 333613 and is intended for those capable of supporting prime contractors on these specific marine upgrades.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on Navsup Weapon Systems Support Mech projects. The scope of work involves providing specialized preservation, packaging, and marking services for repaired Circuit Card Assemblies. All tasks must be executed using ESD packaging materials and must strictly adhere to MIL-STD 2073 and MIL-STD 130 standards to ensure items are ready for shipment. The service provider is responsible for coordinating FOB Destination delivery to DLA Distribution in New Cumberland, Pennsylvania. The final deliverable is a fully packaged and marked assembly that meets all specified military requirements. This opportunity is categorized under NAICS code 333613 and is managed under the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

30--SHAFT,SHOULDERED

Solicitation # SPE7LX27U0305

DLA Weapons Support

POSTED

DEADLINE

Solicitation # N0010424QFD59

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a ball joint designated as Special Emphasis material due to its use in a crucial shipboard system. The requirement is issued under Emergency Acquisition Flexibilities and is classified as a DO rated order for national defense use. The procurement involves high-quality standards, requiring the contractor to adhere to specific NAVSEA drawings and a variety of military and industrial specifications, including QQ-N-281 and MIL-T-1368. Due to the nature of the hardware, the contract requires access to classified drawings, which may necessitate a facility clearance upon award. The award process prioritizes past performance over price, utilizing the DoD Supplier Performance Risk System to evaluate item, price, and supplier risk. Key technical requirements include rigorous testing and certification, such as hydrostatic testing, dye penetrant inspection, and production radiography for specific joints. The delivery schedule specifies a final delivery window of 638 days after the effective date of the contract, with FOB Destination terms for delivery to the Portsmouth Naval Shipyard. Quality assurance is performed at the source, and all invoicing and receiving reports must be processed through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

30--GEARSHAFT,MULTIPLE GEA

Solicitation # SPE7LX27U0267

DLA Weapons Support

POSTED

DEADLINE

30--GEAR OPERATOR,ROTARY

Solicitation # SPE7L327T1072

DLA Weapons Support

POSTED

DEADLINE

30--CONNECTING LINK,RIG

Solicitation # SPE7L127T1835

The Department of Defense, through DLA Weapons Support, is soliciting quotes for the procurement of 56 connecting links for rigs under NSN 3040015233694. This requirement is listed under solicitation number SPE7L127T1835 with a NAICS code of 333613. The approved source for this item is 0GHS0 MT57M1240-1, and delivery is required to DLA Distribution within 139 days after receipt of order. Interested and responsible sources must submit their quotes electronically by the deadline of November 2, 2026. The solicitation is available exclusively online as an RFQ, and no hard copies, specifications, plans, or drawings are provided. All inquiries and submissions should be directed to the primary point of contact at DibbsBSM@dla.mil.

DLA Weapons Support

POSTED

DEADLINE

30--CONNECTING LINK,RIGID

Solicitation # SPE7L127Q0053

DLA Weapons Support

POSTED

DEADLINE

3HD 3040 017330673 D5, SHAFT

Solicitation # N00104-26-Q-FD63

Solicitation N00104-26-Q-FD63 is a request for quotations issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, Pennsylvania, for the procurement of six shafts, identified by NSN 3HD 3040-01-733-0673 D5. This material is designated as Special Emphasis material due to its critical role in shipboard systems, requiring a Certificate of Compliance per CDRL DI-MISC-80678 and strict adherence to higher-level quality standards. The contract is a small business set-aside under NAICS code 333613. Final delivery of the material is required within 200 days, with all certification data due 20 days prior to delivery. Inspection and acceptance will occur at the origin, and the shipping terms are FOB Destination with transportation costs prepaid. The government intends to make a single award based on a best-value determination, prioritizing past performance as the primary evaluation factor and price as the secondary factor. Past performance will be assessed using the DoD Supplier Performance Risk System ratings. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for domestic and overseas shipments. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. Offerors must provide safety data sheets for any hazardous materials and ensure compliance with the Buy American Act and various DFARS regulations, including item unique identification and restrictions on ball and roller bearings.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Solicitation # N0010425QFF48

Solicitation NO0104-25-Q-FF48, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a ball joint (NSN 7540-01-152-8070) designated as Special Emphasis material. Due to its use in a crucial shipboard system, the material is subject to stringent quality control, including Level I scope of certification and strict material traceability. The contract requires the use of specific materials such as QQ-N-281 and MIL-DTL-1222, with mandatory quantitative chemical and mechanical analysis. The order is DX-rated for national defense use and is issued under Emergency Acquisition Flexibilities. The delivery schedule involves a multi-stage process, including the submission of weld procedures and qualification data 120 days after the contract effective date, with final material delivery due within 365 days. Key technical requirements include hydrostatic testing, liquid penetrant inspection, and production radiography, all of which require Navy review and acceptance. The contractor must maintain rigorous material handling and traceability protocols, ensuring all items are permanently marked according to MIL-STD-792. While originally a small business set-aside, the solicitation has been amended to unrestricted status. Access to classified drawings may require a facility clearance in accordance with FAR 52.204-2.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7L127T1837

DLA Weapons Support

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

Aviation Component Parts Supply (Flap Skew Detection)This subcontract for Aviation Component Parts Supply focuses on providing replacement parts and critical components for Flap Skew Detection units to support prime contractors on NAVSUP Weapon System Support projects. The scope of work involves manufacturing or sourcing components compatible with part number 9000421-3, ensuring all items meet original equipment manufacturer specifications and approved drawings. The contractor is required to provide certification of origin and maintain strict compliance with DFARS 252.225-7000 and 252.225-7020 regarding domestic end products. Performance for this Department of Defense effort is based in Philadelphia, with a response deadline set for November 23, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Flap Skew Detection Unit Overhaul ServicesThis subcontract for Flap Skew Detection Unit Overhaul Services involves performing comprehensive teardown, evaluation, repair, and reassembly of specialized units for prime contractors supporting NAVSUP Weapon System Support projects. The scope of work includes disassembling units, cleaning and inspecting components according to approved repair manuals, and replacing any parts that exceed established limits. To ensure quality and functionality, the contractor must utilize provided fixtures, jigs, and test equipment to verify that each unit reaches Ready for Issue status. All work must be performed in strict compliance with IPC/EIAJ-STD-001C and MIL-STD-454 standards. The project is based in Philadelphia and falls under NAICS code 811210. The final deliverable for this Department of Defense effort is a certified Ready for Issue unit.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Aerospace-Grade Wiring and Component Supply

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Power Supply Repair Services

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Flight Control Computer Repair Services

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Specialized Military Packaging & PreservationThis subcontract for the Department of Defense, specifically supporting Navsup Weapon Systems Support, involves providing specialized military-grade packaging and preservation services for prime contractors. The scope of work requires the delivery of preserved and packaged panels ready for shipment, ensuring strict adherence to MIL-STD-2073 standards and the implementation of ESD protection in accordance with ANSI/ESD S20.20-2021. To ensure quality and compliance, the contractor must utilize QPL barrier materials, including MIL-PRF-131, MIL-PRF-81705, MIL-PRF-22191, MIL-PRF-3420, and MIL-PRF-22019. This opportunity falls under NAICS code 488410, with a response deadline set for November 20, 2026.

Motor Vehicle Towing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Interior Lining Panel ManufacturingThis subcontract involves the manufacture or procurement of one interior lining panel, identified as NSN 1RD 1680-01-667-2318 H5, for prime contractors working on Navsup Weapon Systems Support projects. The selected provider must ensure the panel is machine-readable and perform IUID programming in strict accordance with MIL-STD-130 standards. To be eligible, the contractor must maintain ISO9001 quality management certification and be listed as an approved source within the NAVSUP WSS Source Approval Brochure. The project falls under NAICS code 336413, with a response deadline set for November 20, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Military-Standard Electronic Packaging and MarkingThis subcontract for the Department of Defense, specifically under Navsup Weapon Systems Support, involves providing specialized packaging and marking services for sensitive electronic components. The contractor is responsible for applying electrostatic discharge protections using conductive foam and anti-static bags to ensure the safety of electronic assets. All work must strictly adhere to military packaging standards, specifically MIL-STD-129 and MIL-STD-2073-1, to prepare items for FOB Destination shipment. The opportunity was posted on October 21, 2026, with a response deadline of November 20, 2026. Classified under NAICS code 488510, the contract focuses on delivering ready-to-ship, military-standard packaged assets for prime contractors.

Freight Transportation Arrangement

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Aerospace-Grade Wiring Supply (SAE-AS22759)This subcontract involves the supply of high-performance, aerospace-grade wiring for prime contractors supporting NAVSUP Weapon Systems Support projects under the Department of Defense. The contractor is required to provide SAE-AS22759 series wire in either spools or cut lengths, with a strict prohibition against the use of MIL-W-81381 wire. Compliance with Buy American and specialty metals restrictions is mandatory, and the provider must furnish all necessary material certifications. The opportunity is categorized under NAICS code 423610, with a response deadline set for November 20, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Circuit Card Assembly (CCA) and Electronic Component Repair ServicesThis subcontract for the Department of Defense and NAVSUP Weapon Systems Support involves the technical repair, overhaul, and testing of electronic components and circuit card assemblies for prime contractors. The scope of work includes performing failure analysis, creating corrective action plans, and executing test procedures within ESD-protected environments to ensure all delivered items are in ready-for-issue condition. To qualify, providers must maintain ISO 9001 or SAE AS9100 certifications and adhere to ANSI/NCSL Z540.3 or ISO-10012-1 calibration standards. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 20, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 3 hours ago

DEADLINE

in about 1 month

PANEL,STRUCTURAL,AI

Solicitation # N0038327QTA19

Navsup Weapon Systems Support, acting for the Department of Defense, is soliciting a single award for the procurement of Structural Panels, AI under solicitation N0038327QTA19. The contract is managed by the Philadelphia office and requires a delivery period of 90 days, with early and incremental deliveries preferred. Award will be based on the most advantageous offer, with past performance weighted as more important than price. Evaluation of past performance may be conducted using the DoD Supplier Performance Risk System. The contractor must adhere to strict quality and packaging standards, including ISO9001 or SAE AS9100 for quality management and MIL-STD-2073-1 for preservation and packaging. All items must be marked according to MIL-STD-129 and include unique item identifiers using two-dimensional data matrix symbology. Inspection and acceptance will occur at the origin. Payment and invoicing are to be processed electronically through the Wide Area Workflow system. The solicitation also incorporates various regulatory requirements, including Buy American and Free Trade Agreements, hazardous material identification, and safeguarding of covered defense information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

28--ROTOR,COMPRESSOR,AI- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0038327QSA17

POSTED

about 3 hours ago

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS