Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Crating Services

Active

Response Deadline11/30/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and Crating Services supports prime contractors on projects for the Department of the Navy's Navsup Weapon Systems Support. The scope of work involves providing specialized packaging and labeling for control panels to ensure they are ready for government shipment. All activities must strictly adhere to MIL-STD-2073 for packaging and MIL-STD-129 for labeling, with a specific focus on using MIL-SPEC crates and Electrostatic Discharge materials to protect sensitive electronic equipment during transit. The project is categorized under NAICS code 488410 and will be performed in Philadelphia, Pennsylvania. Interested parties should note that the solicitation was posted on October 30, 2026, with a response deadline set for November 30, 2026.

General Info

MIL-SPEC packaging and labeling for Navy control panels in Philadelphia, Pennsylvania.

Agency

Department Of The Navy → Navsup Weapon Systems Support

NAICS

488410 - Motor Vehicle Towing

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of N0038326QSB79.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTROL PANEL,AIRCR — 1680016223480 — N0038326QSB79

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 30

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 09:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provides specialized packaging and labeling for prime contractors on Navsup Weapon Systems Support projects. Executes packaging per MIL-STD-2073 and labeling per MIL-STD-129. Utilizes ESD (Electrostatic Discharge) packaging materials and MIL-SPEC crates to protect sensitive electronic equipment during transit. Delivers fully packaged and labeled control panels ready for government shipment.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of the Navy's NAVSUP Weapon Systems Support. The selected provider will be responsible for the final packaging and marking of assemblies to ensure they are ship-ready, strictly adhering to MIL-STD-2073-1 for packaging and MIL-STD-129 for marking. Specific requirements include the application of DLR labeling and red LEVEL 1 markings, necessitating the use of industrial marking equipment and approved MIL-SPEC materials. The work is to be performed in Mechanicsburg, Pennsylvania, under NAICS code 488410. Interested parties must submit their responses by November 30, 2026, to meet the requirements of the agency.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Marking ServicesThis subcontract for the Department of the Navy, specifically Navsup Weapon Systems Support Mech, involves providing military-grade packaging and physical identification marking for repaired electronic units. The contractor is responsible for ensuring all units are fully marked and packaged for government shipment, adhering strictly to MIL-STD-129, REV R for markings and MIL-STD-2073 for packaging. To support domestic and overseas shipping levels, the work requires the use of industrial marking equipment and ESD-safe shielding. The project is categorized under NAICS code 488410 and will be performed in Mechanicsburg, Pennsylvania. Interested parties should note that the response deadline is November 30, 2026. The primary objective is to deliver repaired units that meet all rigorous military specifications for safe and compliant transport.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-STD Packaging and Marking Services

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Crating ServicesThis subcontract for MIL-SPEC Packaging and Crating Services supports the Department of the Navy's Navsup Weapon Systems Support Mech. The contractor is responsible for providing specialized packaging for repaired rotary compressors intended for prime contractors. All work must be performed in Mechanicsburg, Pennsylvania, ensuring that assets are securely packaged and labeled for shipment. Compliance with strict military and international standards is mandatory, specifically MIL-STD-2073-1 and ASTM D3951-18. The scope of work includes applying DLR labeling and utilizing ISPM 15 compliant heat-treated wood packaging, which requires formal certification for military shipping. The response deadline for this opportunity is November 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Specialized Defense Packaging and Marking ServicesThe Specialized Defense Packaging and Marking Services subcontract involves providing final packaging, marking, and shipment preparation for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all markings adhere to MIL-STD-129 and that packaging follows RP001 DLA Packaging Requirements using compliant industrial materials. Additionally, the contractor is responsible for preparing all necessary hazardous material documentation to ensure components are shipment-ready and capable of passing DLA inspection. This opportunity is categorized under NAICS code 488410 and is associated with the Department of Defense. Performance of the contract will take place in Silverdale, Washington. Interested parties should note the response deadline of November 9, 2026, for this specific defense logistics requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on Defense Logistics Agency supply contracts. The scope of work involves specialized packaging, marking, and palletization of items using industrial equipment to ensure compliance with ASTM D3951, RP001 DLA Packaging Requirements, and MIL-STD-129 standards. The final deliverable consists of shipments that are properly packaged, marked, and palletized for delivery. The opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 488410 and is managed by the Department of Defense through the DLA Weapons Support Land Supplier Opns Vehicle Spt. Performance will take place in New Cumberland, Pennsylvania. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing packaging materials and performing final packing and palletization for 112 bushings. All work must adhere to strict military standards, including ASTM D3951 for packaging, MIL-STD-129 for labeling and marking, and RP001 requirements for palletization, utilizing MIL-SPEC materials and industrial equipment. The completed shipment is designated for FOB Origin delivery to DLA Distribution Jacksonville, with the place of performance located in Jacksonville, Florida. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 488410.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and CratingThis subcontract opportunity for Military-Grade Packaging and Crating supports the DLA Weapons Support Maritime Supply Chain within the Department of Defense. The selected provider will perform final packaging and preservation for prime contractors, ensuring all assemblies are packaged according to MIL-STD-2073-1E and DLA RP001 requirements. Key responsibilities include applying hazard warning labels per DFARS 252.223-7001 and utilizing specific cushioning and containers as outlined in QUP:001 to deliver shipping-ready containers that meet all military specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 488410, with the place of performance located in Barstow, California. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Specialized Packaging and LogisticsThis subcontract for Specialized Packaging and Logistics supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves providing MIL-SPEC packaging and marking for military hardware, specifically adhering to ASTM D3951 and TQ Requirement IP025. All labeling must comply with MIL-STD-129 and RP001 standards to ensure shipment-ready delivery. The contractor is responsible for palletization and FOB Origin transport to DLA Distribution DDSP New Cumberland. Operating under NAICS code 488410, the project focuses on delivering fully compliant packaging solutions for the Department of Defense. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Military Packaging and Palletization ServicesThis subcontract for Military Packaging and Palletization Services is issued by the Department of Defense under the DLA Weapons Support Land Supply Chain. The project requires specialized packaging, marking, and palletization for prime contractors fulfilling DLA supply contracts, specifically focusing on the immobilization of heavy engine blocks. All work must adhere to strict military standards, including MIL-STD-129 for markings and RP001 DLA Packaging Requirements for palletization, utilizing industrial pallets and compliant labeling equipment to deliver fully braced engine block assemblies. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488410. Interested parties must submit their responses by November 9, 2026, following the posting date of October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging, packing, and marking for hydraulic heads to support prime contractors on DLA supply contracts. The scope of work requires strict adherence to military standards, specifically MIL-STD-2073-1E for packing, MIL-STD-129 for markings, and MIL-STD-130 for IUID marking equipment. The contractor must utilize preservation material 89 and wrap material GC while ensuring full compliance with DLA RP001 requirements to deliver fully packed, marked, and palletized shipments. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project is categorized under NAICS code 488410. Performance of these services will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 6, 2026, for this specific procurement opportunity.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports the DLA Weapons Support Land Supply Chain. The scope of work involves providing specialized packaging, marking, and palletization for 24 units of parts, which must be individually packaged and prepared for FOB Origin shipment. All activities must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 and IP025 for palletization, utilizing Packing Level B, Pack Code Q, and preservation material 49. The project is managed under NAICS code 488410 and will be performed in Mechanicsburg, Pennsylvania. Interested parties should note the response deadline of November 9, 2026. This effort ensures that critical components are preserved and transported according to Department of Defense requirements for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support

Same awarding agency

MIL-STD-2073 Aircraft Component PackagingThis subcontract involves providing specialized packaging materials and final crating services for aircraft fuel cell projects under the Navsup Weapon Systems Support for the Department of the Navy. The contractor is responsible for ensuring all items are packaged and labeled for government shipment in strict accordance with MIL-STD-2073-1 and ASTM D3951-18 standards, utilizing MIL-SPEC materials and containers specifically suited for the sensitivity of fuel cells. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 339991. Interested parties should note that the response deadline for this opportunity is November 30, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

SAE-AS22759 Series Aerospace Wire SupplyThis subcontract involves the procurement and delivery of specialized aerospace-grade wiring for prime contractors supporting Navsup Weapon Systems Support aircraft fuel cell projects. The scope of work requires the sourcing of wire that meets SAE-AS22759 series specifications to serve as a direct replacement for obsolete MIL-W-81381 materials. All supplied wiring must be of domestic origin and accompanied by a certification of conformance to the required SAE standards. Managed by the Department of the Navy, the performance of this contract is centered in Philadelphia. Interested parties must adhere to the response deadline of November 30, 2026, for this requirement categorized under NAICS code 335132. The primary objective is to ensure the delivery of certified, high-specification wiring essential for the maintenance and operation of critical aircraft fuel cell systems.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aircraft Fuel Cell Teardown, Repair, and ModificationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of aircraft fuel cells. The selected contractor will be responsible for conducting receipt inspections, performing repairs according to specific drawings and manuals, and executing final acceptance testing to deliver ready-for-issue fuel cells complete with historical record files. To qualify, the provider must maintain ISO 9001 and SAE AS9100 certifications and ensure full compliance with MIL-STD-130. The work requires a specialized facility equipped with tooling, jigs, and calibration systems that meet ANSI/NCSL Z540.3 or ISO-10012-1 standards. Performance of the contract is centered in Philadelphia, with a response deadline set for November 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aerospace/Defense Grade Wiring SupplyThis subcontract involves the supply of high-specification aerospace and defense grade wiring for prime contractors supporting US Navy NAVSUP electronic repair projects. The scope of work requires the delivery of certified SAE-AS22759 series wire, which serves as the designated replacement for MIL-W-81381. Performance for this contract will take place in Philadelphia, Pennsylvania, under the oversight of the Department of the Navy. A critical requirement for this engagement is the provision of certification of origin in accordance with the Buy American-Balance of Payments Program. This ensures that all supplied materials are manufactured within the United States or sourced from a qualifying country. Interested parties should note the response deadline of November 30, 2026, for this procurement effort.

Other Fabricated Wire Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Distributing System Repair and RFI RestorationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Distributing Systems for prime contractors. The scope of work includes disassembling units, replacing faulty internal components, and reassembling them in accordance with IPC/EIAJ-STD-001C soldering standards using SAE-AS22759 series wire. The ultimate goal of the project is the delivery of three restored Ready for Issue units. Performance will take place in Philadelphia and requires strict adherence to technical and security standards. The contractor must utilize calibration equipment compliant with NCSL Z540.3 or ISO 10012 and maintain NIST SP 800-171 cybersecurity compliance. The solicitation was posted on October 30, 2026, with a response deadline of November 30, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aircraft Fuel Cell Pressure and Leak TestingThis subcontract for Aircraft Fuel Cell Pressure and Leak Testing supports the Department of the Navy's NAVSUP Weapon Systems Support. The selected contractor will perform specialized pressure testing and leak detection for three fuel cells, ensuring all repaired units are inspected according to technical drawings and repair manuals. Work will be performed in Philadelphia and requires the use of calibration tools that adhere to ANSI/NCSL Z540.3 or ISO-10012-1 standards. To qualify, the contractor must maintain an ISO 9001 or equivalent quality management system. Key deliverables include the submission of detailed inspection reports and RFI certification for each of the three fuel cells. The solicitation was posted on October 30, 2026, with a response deadline of November 30, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

SAE-AS22759 Aerospace Wire SupplyThis subcontract involves the procurement and delivery of high-performance aerospace-grade wiring for prime contractors supporting the Department of the Navy's NAVSUP Weapon Systems Support. The scope of work specifically requires the supply of SAE-AS22759 series wire, which must be delivered to a repair facility located in Philadelphia. A critical requirement of the agreement is the provision of certification of conformance to guarantee that the supplied material is not MIL-W-81381. The project falls under NAICS code 335313 and is managed through the NAVSUP Weapon Systems Support agency.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aircraft Fuel Cell Repair and RFI RestorationThis subcontract for the Department of the Navy's Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of aircraft fuel cells. The contractor is responsible for delivering three Aircraft Fuel Cells (NSN 1680-01-530-7265 V2) in Ready for Issue condition, ensuring all work adheres to technical drawings, manuals, and MIL-STD-130 marking standards. Technical requirements include the use of SAE-AS22759 series wire and the employment of IPC/EIAJ-STD-001C certified personnel. To ensure quality and compliance, the provider must maintain ISO 9001 or AS9100 quality systems. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 336413. Interested parties must submit their responses by November 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Moisture Separator Replacement Parts SupplierThis subcontract opportunity with the Department of the Navy's Navsup Weapon Systems Support involves the supply of internal components, seals, and hardware for the Moisture Separator, identified by NIIN 016504184. The selected supplier will provide replacement parts or kits to a repair facility in Philadelphia, ensuring all items are sourced from the original equipment manufacturer or are qualified replacements that adhere to technical publications and drawings. The contractor is required to provide comprehensive authenticity documentation and certifications confirming compliance with the Buy American and Trade Agreements Acts. This procurement falls under NAICS code 423830, with a response deadline set for November 30, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Moisture Separator Repair and Overhaul ServicesThis subcontract for Moisture Separator Repair and Overhaul Services supports prime contractors on NAVSUP Weapon Systems Support projects for the Department of the Navy. The scope of work involves the complete teardown, evaluation, repair, and modification of moisture separators to return five units to Ready for Issue condition. This process includes disassembling units, cleaning and inspecting components, and performing reassembly and modifications in strict accordance with technical publications using specialized tooling and test equipment. The project requires strict adherence to industry and government standards, specifically IPC/EIAJ-STD-001C, MIL-STD-130, and NIST SP 800-171. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 811219. Interested parties should note the response deadline of November 30, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) and Inspection Services

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Aerospace Component Finishing and Coating Services

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS