Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and International Shipping Services

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and International Shipping Services involves providing specialized military packaging and transport for prime contractors under Defense Logistics Agency Troop Support contracts. The scope of work requires strict adherence to MIL-STD-2073-1 and MIL-STD-129 for the packaging and marking of equipment, including the management of hazardous material labeling. The selected provider must possess deep expertise in DLA shipping requirements and international military customs to ensure the successful delivery of packaged masks to Navy Region Korea in Busan. The project is managed under the Department of Defense and falls under NAICS code 488190. Performance is centered around APO 96205-0023, with the final destination being Busan, Korea. Interested parties should note the response deadline of October 19, 2026, for this specialized logistics requirement.

General Info

MIL-SPEC packaging and international shipping of masks to Busan, Korea by October 2026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

APO, AP, 96205-0023, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E6-27-T-0190.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MASK, CHEMICAL-BIOLOGIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military packaging and international transport for prime contractors on DLA Troop Support contracts. Packages and marks equipment in strict accordance with MIL-STD-2073-1 and MIL-STD-129. Manages hazardous material labeling and coordinates delivery to Navy Region Korea in Busan. Requires expertise in DLA shipping requirements and international military customs. Delivers packaged masks to final destination in Busan, Korea.

Similar Contracts

Same NAICS industry code

**LES** TOG-ASU SURVEILLANCE AIRCRAFT FLEET UPGRADESThe US Marshals Service, under the Department of Justice, is forecasting a contract for the LES TOG-ASU surveillance aircraft fleet upgrades. This initiative is designed to provide airborne assets that support the agency's Investigative Surveillance and Reconnaissance mission requirements. The project will be executed under NAICS code 488190 and is designated as a Full and Open/Unrestricted competition. Performance for these fleet upgrades is slated to take place in Hagerstown, Maryland. Interested parties can coordinate with Mikelle Everett or Small Business Specialist Shandora Acrey regarding this opportunity, which was posted as a forecast on October 11, 2026.

US Marshals Service

POSTED

DEADLINE

FLEX DUCT ASSEMBLY

Solicitation # SPEFA5-27-T-0007

Solicitation SPEFA5-27-T-0007 is a fixed-price request for quotation issued by the DLA Fleet Readiness Center for the procurement of 30 Flex Duct Assemblies, part number 126657-914, under NSN 2835LLNC04571. This effort is designated as a Total Small Business Set-Aside under NAICS code 488190. All quotes must be submitted electronically via the DLA Internet Bid Board System by October 9, 2026. The approved source for this item is 99193 126657-914, and the required delivery date is October 1, 2026, with delivery and inspection occurring at the destination in Cherry Point, North Carolina. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and MIL-STD-130N(1), with palletization following RP001. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the contract incorporates various FAR clauses regarding equal opportunity, sustainable products, and the prohibition of trafficking in persons.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-30KJ

Solicitation SPE4A6-26-T-30KJ is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 1,546 blind rivets (NSN 5320-01-140-9161, Part Number NAS1921B06S03). This item is designated as a critical application item and must comply with technical standards NAS1921 and NAS1900. The procurement is fully competitive and requires the manufacturer's inspection system to meet SAE AS9003 or ISO 9001 standards. Offers must be submitted by September 23, 2026, and must be based on FOB Origin terms. The need ship date is October 11, 2026, with a final required delivery date of March 11, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and mandates strict adherence to packaging and marking standards, including ASTM D3951 and MIL-STD-129. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing processes. Payment and invoicing must be processed through the Wide Area WorkFlow system. Price evaluation preferences are available for certified HUBZone small business concerns.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aerospace Component Shipping and Specialized StorageThis subcontract for Aerospace Component Shipping and Specialized Storage involves the secure transport and climate-controlled storage of high-value aerospace engine modules for prime contractors supporting DLA Aviation projects. The scope of work includes the specialized packaging of titanium engine cores and the delivery of five to eight units to the DLA Distribution Depot Oklahoma. To ensure the integrity of these components, the contractor must utilize aerospace-grade shipping containers and specialized handling equipment. This project is managed under the Department of Defense for the Ok DLA Aviation agency in Oklahoma City, with a response deadline set for November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

MIL-SPEC Packaging and UID Marking ServicesThis subcontract for MIL-SPEC Packaging and UID Marking Services supports prime contractors on DLA Aviation projects through the Department of Defense. The scope of work involves performing specialized military-grade packaging and unique item identification marking for aviation components. All marking must utilize 2D data matrix symbology and adhere to strict industry standards, including ISO/IEC 16022, ISO/IEC 15434, ISO/IEC 15418, and ANSI MH 10.8.2. Packaging operations must be executed in accordance with MIL-STD-2073 and MIL-STD-129 using industrial ink or laser marking equipment. This opportunity falls under NAICS code 488190 and is associated with the Pa DLA Aviation office in Philadelphia. The response deadline for this requirement is November 9, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

HHG Packing, Crating, and Containerization ServicesThis subcontract opportunity is for HHG Packing, Crating, and Containerization Services supporting military household goods projects for the Department of Defense under agency FA4803. The selected provider will be responsible for outbound, inbound, and intra-city packing and crating, which includes conducting removal surveys, disassembling furniture, and ensuring all items are properly packaged, tagged, and braced. All shipping containers must adhere to Commercial Spec ASTM-D4169-14 and SDDC Pamphlet 55-12 standards, with final deliverables being sealed and weighed containers ready for linehaul transport. The project is designated as a set-aside for SBA Certified Women-Owned Small Businesses under NAICS code 488190. Interested parties must submit their responses by November 3, 2026. Performance of the contract will take place in the 29152 zip code area.

FA4803 20 Cons Lgca

POSTED

DEADLINE

J--NOAA P-3 Rolls-Royce Maintenance & Support Service

Solicitation # 1305M226Q0153

The Department of Commerce NOAA is seeking a contractor to provide maintenance, technical support, and training services for P-3 Rolls-Royce T56-A-14 Series 3.5 engines. This combined contract opportunity, identified by solicitation number 1305M226Q0153, falls under NAICS code 488190 and is managed through the agency's office located in Norfolk, Virginia. Interested parties must submit their responses by the deadline of October 21, 2026. The primary point of contact for this requirement is Alicha Harris. Further details regarding the submission process and specific performance requirements can be accessed via the official government workspace link.

Department Of Commerce Noaa

POSTED

DEADLINE

Water-Based Tour Transportation (Boat Charters)This subcontract agreement involves the provision and operation of water-based vessels, such as tour boats or catamarans, to support prime contractors on projects within the Halifax Regional Municipality. The scope of work focuses on delivering water-based transit and sightseeing platforms, specifically managing boat charters for tour groups including the coordination of embarkation and disembarkation processes. To qualify for this engagement, service providers must hold all necessary Coast Guard certifications and maintain comprehensive insurance through providers with an AM Best rating of A+ or higher. The solicitation was posted on October 9, 2026, with a response deadline set for November 6, 2026.

Halifax Regional Municipality

POSTED

DEADLINE

Specialized Military Packaging and LogisticsThis subcontract for Specialized Military Packaging and Logistics supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project requires the specialized packaging of critical electronic components, specifically five oscillators, to be performed at Hill AFB. All work must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001 requirements for palletization. To ensure the integrity of the electronics, the contractor must utilize anti-static and moisture-barrier materials. The final deliverable consists of five palletized and marked oscillators ready for shipment. The solicitation was posted on October 8, 2026, with a response deadline of October 16, 2026, falling under NAICS code 488190.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Medical Device Packaging and Marking ServicesThis subcontract for Medical Device Packaging and Marking Services supports prime contractors on DLA Troop Support Medical Supply Chain projects for the Department of Defense. The scope of work involves providing medical-grade packaging and marking for supplies destined for the USNS Lewis and Clark. All activities must strictly adhere to ASTM D3951 for packaging and MIL-STD-129 and Medical Marking Standard No. 1 for labeling and markings, utilizing compliant labeling systems to ensure cases are ready for destination acceptance. The project is categorized under NAICS code 488190 and is managed by the Medical Supply Chain MD Surg FSF. Performance of the contract takes place at FPO 96671-4077. Interested parties should note the response deadline of October 14, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MIL-SPEC Packaging and MarkingThis subcontract involves providing military-grade packaging and labeling services for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The scope of work focuses on the processing of critical fluid elements, requiring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for markings. To ensure product integrity and prevent contamination, the contractor must utilize industrial marking equipment and moisture barriers, while specifically managing labeling for items with a 12-month shelf life. The final deliverable consists of fully packaged and marked shipments prepared for FOB Origin transport. This opportunity falls under NAICS code 488190 and was posted on October 8, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MIL-STD Packaging and Marking ProviderThis subcontract opportunity is for a MIL-STD Packaging and Marking Provider to support prime contractors on projects for the Department of Defense, specifically DLA Distribution San Joaquin. The selected provider will be responsible for specialized military-grade packaging, marking, and kitting of repair kits. All work must strictly adhere to MIL-STD-2073-1E, MIL-STD-2073-1 Appendix D, and MIL-STD-129 for labeling and marking, utilizing approved military-grade preservatives, wrap, and cushioning. The scope of work culminates in the delivery of two fully packaged and marked kits ready for shipment. Performance will take place in Tracy, California. Interested parties should note the response deadline of October 19, 2026, and the associated NAICS code 488190.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Ported Ball Valve Supplier (NSN 4820200133040)This subcontract involves the supply of one ported ball valve for prime contractors under Defense Logistics Agency Land and Maritime contracts. The required component is identified by NSN 4820200133040 and must match Montreal Bronze Limited part number 203-0014. The supplier must ensure full compliance with the DLA Master List of Technical and Quality Requirements, including a strict prohibition on the use of mercury. The valve must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Delivery of the warranted valve is required FOB Origin to the USS Ft Lauderdale LPD 28 Bliss, with the place of performance located in Pascagoula. This procurement falls under NAICS code 332911 and is managed by the Department of Defense.

Industrial Valve Manufacturing

POSTED

DEADLINE

International Freight Forwarding and Delivery (Japan)This subcontract for the Defense Logistics Agency involves the international freight forwarding and delivery of five specialized combustion components to the Commander SRF-JRMC at Yokosuka Naval Base in Japan. The selected provider is responsible for coordinating the entire shipment process from origin to destination, which includes managing all necessary customs clearance for entry into Japan and ensuring the secure transport of materials. To maintain compliance, all shipments must utilize secure transport containers that meet MIL-STD-129 and ASTM D3951 standards. The contractor is required to hold all relevant international shipping certifications and obtain the necessary security clearances for base access. The contract is established as FOB Destination, with performance taking place in FPO 96349.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Atomizer Assemblies (NSN 4530-01-119-9501)This subcontract involves the supply of five specialized Atomizer Assemblies, identified by NSN 4530-01-119-9501, for prime contractors serving the Defense Logistics Agency. The units must strictly adhere to Todd Combustion Inc specifications P/N A-2-36-35 and D-42042. All deliverables are required to comply with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements, with packaging meeting MIL-STD-129 and ASTM D3951 standards. The contract specifies a delivery of five assemblies FOB Destination to Yokosuka Naval Base in Japan. Managed under NAICS code 423830, the procurement process includes a response deadline of October 15, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Packaging and International ShippingThis subcontract involves providing specialized packaging and international logistics services for prime contractors supporting Defense Logistics Agency Troop Support Foreign Military Sales projects. The scope of work focuses on the packaging and marking of hazardous cleaning solvents in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and IP025 standards, specifically requiring the application of shelf-life marking code 32 to ensure transit-ready shipments. The contractor is responsible for coordinating international freight movements to Israel, Egypt, and Slovakia. Due to the nature of the materials and destinations, the provider must maintain valid Hazmat shipping certification and ensure full compliance with ITAR and EAR regulations. This effort falls under NAICS code 488510 and is managed through the Department of Defense.

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Cleaning Solvent, GE (NSN 7930-01-367-0996)This subcontract through the Defense Logistics Agency involves the procurement of 37,011 units of Cleaning Solvent, GE, identified by NSN 7930-01-367-0996. The selected provider is responsible for manufacturing or sourcing chemicals that strictly adhere to NSN specifications, maintaining full supply chain traceability, and issuing Certificates of Conformance. These supplies are intended for prime contractors working on DLA Troop Support Foreign Military Sales projects, with final delivery destinations in Israel, Egypt, and Slovakia. To qualify for this contract, the provider must meet rigorous security and regulatory standards, including CMMC Level 2 and ITAR/EAR compliance. Additionally, certification under the US/Canada Joint Certification Program is required. The project falls under NAICS code 325998 and is managed by the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Specialized Freight & Oversized HaulingThis subcontract for Specialized Freight and Oversized Hauling supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves the loading, securing, and transportation of six completed oversized portable buildings from the manufacturer to various delivery points across the continental United States. The contractor is required to utilize flatbed trailers and cranes to execute these movements and must maintain all necessary DOT certifications for hauling oversized loads. This effort falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Material Containment Liners & Sump SystemsThis subcontract involves the manufacture, supply, and installation of secondary containment systems for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the production and fitting of chemical-resistant liners or integrated sump basins, constructed from HDPE or other chemical-resistant polymers, for the base of two-tier hazardous material storage structures. The project specifically entails the delivery of integrated containment basins and liners for six units. All deliverables must strictly adhere to EPA and OSHA standards for secondary containment to ensure safety and regulatory compliance. The contract is categorized under NAICS code 339999 and is managed through the Department of Defense. Interested parties should note the response deadline of October 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Specialized Steel Fabrication & AssemblyThis subcontract for Specialized Steel Fabrication and Assembly involves the production of structural frames and housings for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work focuses on the precision cutting, welding, and assembly of industrial steel components to create Two-Tier Portable Hazardous Material Storage Buildings, specifically part number 30B-TT. Deliverables include the completed structural shells, which must feature two-tier shelving and outer protective shells finished with corrosion-resistant paint. All fabrication must strictly adhere to DLA safety specifications regarding hazardous material containment. This opportunity falls under NAICS code 332312 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Valve Piston Manufacturing/Supply (NSN 4820-01-665-4866)This subcontract involves the manufacture or procurement of one Valve Piston, specifically Vacco Industries part number 12052025-1 under NSN 4820-01-665-4866, to support prime contractors for the Defense Logistics Agency Land and Maritime supply contracts. The supplier must adhere to the DLA Master List of Technical and Quality Requirements and ensure all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129 standards. The contract requires strict compliance with the Buy American Act and the Berry Amendment, with the final product delivered FOB Destination to Groton. This opportunity is categorized under NAICS code 332999 and is managed by the Department of Defense.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-306D

Solicitation SPE7MC-26-T-306D is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one valve seat, identified by NSN 4820-01-485-2309. The item must be manufactured in accordance with Basic Drawing NR 53711 5001003, Revision R, and Reference Standard MIL-STD-1330E, Revision E. Delivery is required within five days after receipt of order to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. This procurement carries stringent technical and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific mandates for oxygen clean packaging and DLA palletization requirements. The government will not evaluate offers utilizing additive manufacturing. Additionally, the solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns and requires compliance with the Buy American Act and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Industrial Valve Manufacturing

POSTED

DEADLINE

LIMITER, ELECTRICAL NOI

Solicitation # SPE4A7-27-Q-0040

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A7-27-Q-0040 for the procurement of six electrical limiters. The items are identified by NSN/Part Number 5895-01-447-6061 and are associated with purchase request 7017409225. This federal solicitation was posted on October 9, 2026, with a response deadline set for October 19, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-305Z

Solicitation SPE7MC-26-T-305Z is a fixed-price request for quotation issued by DLA Land and Maritime for the procurement of one gate valve, identified by NSN 4820014658423 and Circor Aerospace part number HV09-13-4. The requirement specifies a delivery timeline of five days after order, with the shipping destination located at Fort Hunter Liggett in Jolon, California. While the CLIN schedule indicates FOB Origin, both inspection and acceptance are designated to occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and RP001 for palletization, with ASTM D3951 serving as the general packaging standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging guidelines. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered telecommunications equipment.

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS