Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking Services

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging and marking for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work focuses on the processing of fluid filter elements, requiring strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards. Additionally, the contractor must execute preservation method .33 and cleaning/drying .1, while ensuring all hazardous material labeling complies with 29 CFR 1910.1200. The project is based in San Diego, California, and requires the delivery of finished, labeled filter elements prepared for FOB Origin shipment. Interested parties should note the response deadline of October 21, 2026, for this opportunity categorized under NAICS code 488190.

General Info

MIL-SPEC packaging and marking for DoD fluid filter elements in San Diego, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1087.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FILTER ELEMENT, FLUID

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military-grade packaging and marking for prime contractors on DLA Weapons Support ASC projects. Packages fluid filter elements per MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 requirements. Applies hazardous material labeling per 29 CFR 1910.1200 and executes preservation method .33 and cleaning/drying .1. Delivers finished, labeled filter elements ready for FOB Origin shipment.

Similar Contracts

Same NAICS industry code

Solicitation # SPEFA5-27-T-0057

Solicitation SPEFA5-27-T-0057 is issued by the DLA Aviation at Cherry Point, North Carolina, for the procurement of one unit of a critical application item described as WEB, identified as Bell Textron Inc 97499 P/N 205-030-919-57 (NSN 5306LNCC2522). The required delivery date is October 9, 2026, with a delivery lead time of 56 days. Both inspection and acceptance will occur at the destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The procurement is categorized under NAICS code 488190 and may be eligible for automated award. The contractor must adhere to strict quality and packaging standards, including MIL-STD-130N for property identification, MIL-STD-129 for shipment marking, and ASTM D3951 for packaging, with DLA Master List requirements taking precedence. Quality assurance requires compliance with SAE AS9003 or ISO 9001, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment requests. The contract incorporates various FAR and DFARS clauses covering cybersecurity, domestic sourcing via the Buy American Act, and prohibitions on covered defense telecommunications equipment.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 13 hours ago

DEADLINE

HOSE, NONMETALLIC 601/

Solicitation # SPEFA5-27-T-0058

Solicitation SPEFA5-27-T-0058 is a fixed-price procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the acquisition of 624 units of nonmetallic hose, part number 601/AE701-10 (NSN 4720LLNCP3177). The requirement allows for a quantity variance of plus or minus 10 percent. Delivery is required within 17 days after the order is placed, with an original required delivery date of October 9, 2026. The items are to be delivered FOB Destination to the Fleet Readiness Center DLA in Cherry Point, NC. The contract mandates strict adherence to quality and packaging standards, requiring packaging per ASTM D3951 and marking per MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. This acquisition is classified under NAICS code 488190 and incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity safeguarding of defense information. Quotations must be submitted via the DIBBS portal by October 22, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 13 hours ago

DEADLINE

TAPE, PRESSURE SENSITIV

Solicitation # SPE8EN-27-T-0133

Solicitation SPE8EN-27-T-0133 is a Request for Quotation issued by DLA Troop Support Construction and Equipment for the procurement of 8 rolls of pressure sensitive adhesive tape, identified by NSN 7510-01-358-8770. The requirement specifies a non-extendable shelf life of 24 months for this Type I Code M item, and the vendor is responsible for applying the correct dates and labeling prior to delivery. The original required delivery date is February 16, 2027, with a need ship date of April 12, 2027. Delivery is established as FOB Origin, while both inspection and acceptance will occur at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including Special Marking Code 32 for shelf-life items. Additionally, the vendor must comply with DLA packaging requirements RP001 and hazardous materials shipping standards IP025, ensuring all hazardous materials are labeled according to the Hazard Communication Standard. Technical and quality requirements are governed by the DLA Master List, and the procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and safeguarding covered defense information. All quotes must be submitted electronically via the DIBBS system, and payment will be processed through the Wide Area WorkFlow system.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 13 hours ago

DEADLINE

Aerial Seeding and Patrolling ServicesThis subcontract for Aerial Seeding and Patrolling Services supports precipitation enhancement projects for the New Mexico Office of State Engineer. The selected provider will perform aerial patrolling to identify suitable cloud formations and execute the dispersal of seeding agents on behalf of prime contractors. Key deliverables include the conduct of flight operations and the submission of detailed flight logs and dispersal reports. Interested parties must respond by November 10, 2026, under NAICS code 488190.

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Delivery ServicesThis subcontract for MIL-SPEC Packaging and Delivery Services involves providing specialized packaging materials and professional packing and marking services for prime contractors fulfilling DLA supply contracts. The scope of work specifically focuses on structural aircraft panels, requiring strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards. To ensure product integrity, the contractor must utilize preservation materials and cushioning in accordance with QUP:001 and PRES MTHD:10. The final deliverable is a shipment-ready, MIL-SPEC packaged aircraft panel. The contractor is responsible for coordinating FOB Origin shipping to DLA Distribution in Cherry Point, North Carolina. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract involves providing specialized packaging, marking, and labeling services for aerospace hardware to support prime contractors on DLA Weapons Support ASC projects. The scope of work requires the use of MIL-SPEC materials and compliant labeling systems to ensure all shipments meet ASTM D3951, RP001, and MIL-STD-129 standards. The final deliverable consists of shipping-ready containers of shear bolts prepared for delivery to Robins Air Force Base. Managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, the project falls under NAICS code 488190. The performance of these services is centered at Robins AFB, zip code 31098-1887. Interested parties should note the response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

MIL-SPEC Aerospace Packaging and LogisticsThis subcontract for MIL-SPEC Aerospace Packaging and Logistics supports prime contractors on DLA Weapons Support ASC aircraft parts contracts. The selected provider is responsible for supplying specialized packaging and performing final packing of components to ensure they are ready for origin inspection and shipment to DLA Distribution. All work must strictly adhere to ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Additional critical requirements include the preparation of Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and the maintenance of HazMat shipping certification. The performance of these services will take place in New Cumberland, Pennsylvania, under the oversight of the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-SPEC Packaging and Delivery ServicesThis subcontract for MIL-SPEC Packaging and Delivery Services involves providing specialized military packaging and shipping for prime contractors supporting Defense Logistics Agency Aviation projects. The scope of work requires strict adherence to MIL-STD-129 for shipment labeling and ASTM D3951 and RP001 DLA Packaging Requirements for all packaging activities. The contractor is responsible for managing palletization according to RP001 standards and ensuring FOB Destination delivery to Fleet Readiness Center East in Cherry Point, North Carolina. The engagement concludes upon the successful delivery of the packaged and labeled components to the designated point of acceptance.

Defense Logistics Agency

POSTED

DEADLINE

MIL-SPEC Packaging and FPO Delivery ServicesThis subcontract for the Defense Logistics Agency involves providing specialized preservation, marking, and shipping services for prime contractors. The scope of work requires packaging hardware according to RP001, performing preservation in compliance with MIL-STD-2073-1E Method 20, and ensuring all marking adheres to MIL-STD-129 standards. The contractor is responsible for the delivery of preserved and marked components to the USS Cape St George CG 71, located at FPO AP 96662. This is a FOB Destination contract with a response deadline of October 26, 2026, falling under NAICS code 488190.

Defense Logistics Agency

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ProviderThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 67 precision set screws in accordance with MIL-STD-2073-1E and the application of markings per MIL-STD-129. The provider must utilize MIL-SPEC wraps, cushions, and industrial labeling equipment to ensure all hardware meets strict military specifications for FOB Origin shipment. The project is categorized under NAICS code 488190 and will be performed in Tracy, California. Interested parties should note the response deadline of October 21, 2026, for this specific requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1003

Solicitation SPE4A5-27-T-1003, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of 17 loop clamps, identified by NSN 5340016959125 and Sikorsky Aircraft Corporation part number 06308-10801-103. The contract specifies a delivery period of 144 days, with a need ship date of March 15, 2027, and an original required delivery date of October 31, 2027. Delivery is FOB Origin, with the destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging requirements under ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. All packaging must be marked according to MIL-STD-129 and palletized per RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, specifically those regarding cybersecurity, safeguarding covered defense information, and domestic material restrictions such as the Buy American Act and Berry Amendment. Quotes must be submitted via the DLA Internet Bid Board System.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0053

Solicitation SPEFA5-27-T-0053 is a fixed-price request for quotations issued by the Defense Logistics Agency Aviation at Cherry Point, North Carolina, for the procurement of one name plate, part number 696-133-002 and NSN 1680-LL-NC0-1907. The requirement is for a single unit to be delivered to the Fleet Readiness Center East in Cherry Point, NC, with a required delivery date of October 14, 2026, and a delivery lead time of five days after order. The contract specifies FOB Destination for both inspection and acceptance, with the government conducting inspection under FAR 52.246-2. The contractor must adhere to strict quality and packaging standards, including MIL-STD-130N(1) for identification marking and MIL-STD-129 for shipment labeling. Packaging must comply with ASTM D3951 and RP001 for palletization, with DLA Master List requirements taking precedence. Quality assurance involves sampling per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding small business programs, combating trafficking in persons, and safeguarding covered defense information. Quotations are due by October 21, 2026.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Precision Machined Spacer FabricationThis subcontract involves the manufacture and supply of four precision-machined special-shaped spacers for prime contractors supporting DLA Weapons Support contracts. The fabrication process must strictly adhere to Reference Drawing NR 19207 12581432 and TDP Rev C Gen 3. Quality control and logistics requirements include sampling per MIL-STD-1916 or ASQ H1331, marking according to MIL-STD-129, and packaging in compliance with MIL-STD-2073-1E. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division, falling under NAICS code 332710. Final delivery of the completed spacers is required at the DLA Distribution center located in New Cumberland, Pennsylvania.

POSTED

about 13 hours ago

DEADLINE

Manufacture and Supply of Straight Headless PinsThis subcontract involves the manufacture and supply of 10 precision-machined straight headless pins for the Department of Defense, specifically supporting DLA supply contracts for the Egyptian Navy. The contractor is responsible for fabricating the pins according to Basic Drawing NR 53711 5520491, Rev B, with inspection conducted per MIL-STD-1916 or ASQ H1331 and marking performed per RQ017. Strict compliance with export control regulations is required, including JCP certification and adherence to ITAR and EAR standards. Final deliverables must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. The project falls under NAICS code 332722 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Distribution for Aerospace FastenersThis subcontract involves providing specialized cleaning, preservation, and packaging services for aerospace fasteners supporting DLA Weapons Support ASC projects. The contractor is responsible for cleaning and drying parts according to MTHD.10 standards and ensuring all packaging adheres to MIL-STD-2073-IE and RP001 specifications. All shipments must be marked in accordance with MIL-STD-129 and delivered as palletized units to DLA Distribution San Joaquin. This effort is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, falling under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Manufacture of Critical Safety Item (CSI) Aerospace BoltsThis subcontract involves the manufacture of 358,000 high-precision aerospace bolts with externally relieved bodies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The components are classified as Critical Safety Items and must be fabricated in strict accordance with Drawing NR 99207 P1-TE1 and QAP 77445 MQR-PSD-1, utilizing zero-based sampling per MIL-STD-1916 to ensure all CSI specifications are met. To qualify for this project, the manufacturer must maintain AS9100 certification and CMMC Level 2 compliance. Additionally, JCP certification is required to handle export-controlled data. The contract falls under NAICS code 332722 and is managed by the DLA Weapons Support ASC Supplier OE and AF Division.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Aerospace Special Process FinishingThe Aerospace Special Process Finishing subcontract involves providing plating, heat treating, and coating services for prime contractors supporting DLA Weapons Support ASC aircraft projects. The selected provider will be responsible for delivering finished structural components in strict accordance with Drawing 20145214 and TDP specifications. A critical requirement of this contract is full compliance with DFARS 252.223-7008, which prohibits the use of hexavalent chromium. All special processes performed under this agreement must hold NADCAP approval to ensure industry-standard quality and safety. The work is associated with NAICS code 332813 and will be performed at Tinker AFB. Interested parties must adhere to the response deadline of October 22, 2026, to be considered for this Department of Defense requirement.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Aerospace Non-Destructive Testing (NDT)This subcontract involves providing specialized non-destructive testing services for aircraft component projects under the DLA Weapons Support ASC. The selected provider will be responsible for executing NDT protocols in strict accordance with technical drawings and RQ040 accreditation requirements to verify the structural integrity of components. A critical requirement for this engagement is that the contractor must hold NADCAP approval for the specific NDT processes employed, and they are expected to deliver certified inspection reports confirming pass results. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division, with the place of performance located at Tinker AFB. The opportunity is categorized under NAICS code 541380. Interested parties should note the response deadline of October 22, 2026, to ensure all necessary certifications and proposals are submitted for consideration.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Aircraft Structural Support FabricationThis subcontract for Aircraft Structural Support Fabrication involves the manufacture of seven completed structural components, identified by NSN 1560-01-606-0735, for prime contractors supporting the DLA Weapons Support ASC. The work requires precision machining to aerospace tolerances in strict accordance with TDP Rev A Gen 2 and Drawing 20145214 for part number L2400006-009. Performance of the contract will take place at Tinker AFB. To qualify for this project, the manufacturer must maintain NADCAP approval for all special processes and adhere to CMMC Level 2 security standards. Additionally, strict compliance with ITAR and EAR regulations is mandatory. The solicitation was posted on October 14, 2026, with a response deadline of October 22, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Infrared Light Filter Supplier (NSN 5855-01-505-2781)This subcontract involves the supply of 29 infrared light filters for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC. The supplier is responsible for manufacturing or sourcing filters that strictly adhere to NSN 5855-01-505-2781 specifications. Quality assurance must be maintained through sampling conducted per MIL-STD-1916 or ASQ H1331, with marking and packaging requirements following RQ017, ASTM D3951, and MIL-STD-129 standards. The contract requires full compliance with RD004 cybersecurity standards to ensure data protection. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 22, 2026, for this requirement categorized under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacturer of Blind Rivets (NAS9302)This subcontract involves the manufacture and supply of 325,000 blind rivets, specifically part number NAS9302BNS-6-11, to support prime contractors delivering on Department of Defense contracts for the DLA Weapons Support ASC Supplier Oper AE and AF Div. Production must strictly adhere to NAS9302 Rev 7 and NAS1686 Rev 5 standards, utilizing precision aerospace fastener equipment and rigorous quality controls for critical application items. Quality assurance will be managed through sampling performed per MIL-STD-1916 or ASQ H1331. Final deliverables must be packaged in accordance with ASTM D3951 and MIL-STD-129. The opportunity is categorized under NAICS code 332722, with a response deadline of October 16, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

RF Cable and Connector SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the supply of high-frequency coaxial cabling and RF connectors. The scope of work focuses on providing raw materials, including precision connectors and shielding, specifically for NSN 5995-01-692-2723. These materials are delivered directly to the manufacturer to support prime contractors fulfilling DLA supply contracts. A critical requirement of the agreement is strict adherence to DFARS 252.223-7008, ensuring all provided materials are free of hexavalent chromium. To verify compliance, the supplier must provide Certificates of Conformance. The contract falls under NAICS code 423610 and was posted on October 14, 2026, with a response deadline of October 21, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Radio Frequency (RF) Cable Assembly FabricationThis subcontract involves the fabrication of eight Radio Frequency (RF) cable assemblies for prime contractors supporting DLA supply contracts. The work requires the assembly of NSN 5995-01-692-2723 in strict accordance with RA001 technical requirements and MIL-STD-2073-1E packaging standards. To ensure signal integrity, the contractor must utilize specialized RF signal testing equipment and maintain compliance with DFARS 252.223-7008 regulations concerning hexavalent chromium. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the project falls under NAICS code 335999. The solicitation was posted on October 14, 2026, with a response deadline of October 21, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture and Supply of Tubular Fairlead HalvesThis subcontract involves the manufacture and supply of three tubular fairlead halves for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The components must be fabricated using precision machining in accordance with NSN 5342-00-837-8916. The contractor is required to adhere to strict quality and logistics standards, including sampling per MIL-STD-1916 or ASQ H1331 and marking per RQ017. Final packaging must comply with MIL-STD-2073-1E and MIL-STD-129. The opportunity was posted on October 14, 2026, with a response deadline of October 22, 2026, under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS