Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking Services for Aircraft CSI

Active

Federal

Response Deadline09/08/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

488410 - Motor Vehicle TowingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A1-26-T-2727.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TIRE, PNEUMATIC, AIRCRAF

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 31

subcontract

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs military-grade packaging and marking for prime contractors delivering DLA supply contracts. Applies markings per MIL-STD-129 and executes packaging data per MIL-STD-2073-1E and RP001. Utilizes MIL-SPEC cushioning and dunnage for critical aircraft components. Ensures HazMat labeling per 29 CFR 1910.1200 and DFARS 252.223-7001. Delivers fully compliant, marked, and packaged units.

Similar Contracts

Same NAICS industry code

Towing & Storage of Unauthorized Vehicles at DMV HQ

Solicitation # QQ-127678

The Virginia Department of Motor Vehicles is seeking a licensed towing and recovery operator to provide on-call towing and secure storage services for unauthorized vehicles at its headquarters in Richmond, Virginia. These services must be available 24 hours a day, 7 days a week, and 365 days a year, with vehicle removal occurring only upon the authorization of designated DMV security personnel or other authorized representatives. This contract is provided at no cost to the DMV, as the contractor is responsible for recovering all authorized towing, storage, and related charges directly from the vehicle owner or the legally responsible party. All operations must comply with applicable federal, state, and local laws and regulations. Interested parties must respond to solicitation QQ-127678 by September 14, 2026.

Department of Motor Vehicles

POSTED

about 19 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and Marking

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Military Grade Packaging and Palletization Services

LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Marking

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

Military Packaging and Marking Specialist

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Medical Grade Packaging and Shipping Services

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Logistics Services

MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

FDT Compliant Packaging and First-Destination Handling

ASC COMMODITIES DIVISION

POSTED

DEADLINE

DLA Compliant Packaging and Shipping

LAND SUPPLY CHAIN

POSTED

DEADLINE

27FQ1, Vehicle Towing and Recovery

Solicitation # BPM058693

Frederick County Public Schools is seeking a contractor to provide comprehensive towing, transport, and recovery services for all types of vehicles within its fleet. This solicitation, identified as BPM058693, is open to providers capable of handling both commercial and private vehicle recovery needs throughout Maryland. Interested parties must submit their responses by September 28, 2026. The procurement process is managed by Krista Long, and all official documentation, including the solicitation package and final award recommendations, will be hosted on the FCPS OpenGov Procurement portal and the district's official bid list following Board of Education approval.

Frederick County Public Schools

POSTED

DEADLINE

Police Towing & Vehicle Evidence Storage

Solicitation # 298-FY27-APD-RFP-EvidenceTowing

The City of Asheville is seeking proposals for solicitation number 298-FY27-APD-RFP-EvidenceTowing to secure a provider for police towing and vehicle evidence storage. The selected contractor will be responsible for providing consistent, safe, and secure transportation, towing, and storage of vehicles used as evidence for the department and its law enforcement partners. These services must be available 24 hours a day, 7 days a week, 365 days a year to ensure continuous operational support. The solicitation was posted on September 1, 2026, with a proposal submission deadline of September 23, 2026, by 5:00pm EDT. The projected start date for the project is November 1, 2026. Administrative inquiries are directed to Project Manager Elise Lewis, and all official documentation and updates are managed through the City of Asheville procurement website. The contract falls under NAICS code 488410 and is performed within the state of North Carolina.

City of Asheville

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

Supply of Machine Screws (NSN 5305-00-099-8365)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Spring Holders (NSN 5340-01-617-4150)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-2732

This solicitation is for the procurement of 812 machine bolts under contract number SPE4A1-26-T-2732 for the Department of Defense Aviation Supply Chain. The delivery requirement is set for 228 days after order, with performance located in Tracy, California. The contract adheres to specific technical and quality requirements listed in the DLA Master List, including strict packaging standards and inspection and acceptance at origin. Compliance requirements are significant, including CMMC Level 2 certification for third-party assessment and adherence to export control regulations under ITAR and EAR. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, ensuring zero non-conformances in sample lots unless otherwise specified. Item Unique Identification is not required for this specific order.

Precision Turned Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-2638

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A1-26-T-2638 for the procurement of 76 ring spacers, identified by NSN/Part Number 5365-01-228-0895. This federal requirement is tracked under purchase request 7017940819. The solicitation was posted on August 18, 2026, and requires a response by the deadline of August 26, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

BOLT, CLOSE TOLERANCE

Solicitation # SPE4A1-26-T-2731

This contract is for the procurement of 213 close tolerance bolts, identified by NSN 5306011200283. The items are designated as critical application hardware and must be manufactured according to the current revision of the applicable military or consensus non-government part standards, specifically referencing TDP Rev A Gen 1 and standards NA0036 and NA0008. Delivery is required within 280 days, with a need date of June 18, 2027, and shipment is directed to DLA Distribution Jacksonville. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific protocols for packaging, physical identification, and bare item marking. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA procurement requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-26-Q-0126

This contract is a solicitation for the procurement of 296 spring holders, identified by NSN 5340-01-617-4150 and Meggitt Aircraft Braking Systems part number 90009095. The item is designated as a critical application item with a delivery requirement of 180 days after order. Inspection and acceptance will take place at the destination, while the shipping terms are FOB origin. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and MIL-STD-129, with commercial packaging following ASTM D3951 if the material is non-hazardous. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Item Unique Identification is not required for this request. All shipments are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.

Spring Manufacturing

POSTED

about 23 hours ago

DEADLINE

END PLATE ASSEMBLY

Solicitation # SPE4A1-26-Q-0123

This contract is a solicitation for the procurement of 11 End Plate Assemblies, identified by NSN 2915-01-255-3250. The delivery requirement is set for 175 days after order, with a material need date of August 22, 2026. The order specifies a zero percent quantity variance and designates the inspection and acceptance points at the destination, with shipping terms set as FOB Origin. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Item Unique Identification is not required for this request. Technical data is noted as proprietary, and the assembly must align with TDP Rev A Gen 1 and QAP 13873.

Plate Work Manufacturing

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-26-T-2730

Solicitation SPE4A1-26-T-2730, issued by DLA Aviation under the Aviation Supply Chain, is a request for quotations for the procurement of four machine screws, identified by NSN 5305-00-099-8365. The requirement is associated with NAICS code 332722 and purchase request 7018097313. Quotes are due by September 10, 2026, with a required delivery timeline of five days after receipt of order. The items are to be shipped FOB Origin via the fastest traceable means to the Marine Aviation Logistics Squadron 26 in Jacksonville, North Carolina, under the First Destination Transportation program. The contract mandates strict adherence to DLA technical and quality requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment marking, and MIL-STD-130N for military property identification. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. Item Unique Identification is not required for this specific order.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

AIS COVER ASSY, AIRC

Solicitation # SPE4A1-26-T-2733

Contract SPE4A1-26-T-2733 is a solicitation issued by the Department of Defense Aviation Supply Chain for one AIS Cover Assembly for aircraft, identified by NSN 1680-01-585-2371 and Lockheed Martin part number 79705465-019. This item is designated as a critical application item with no shelf life requirement. The contract specifies a delivery timeframe of 20 days after order, with a required delivery date of March 4, 2025. Delivery is FOB Origin, with inspection and acceptance occurring at the destination. The procurement is subject to several technical and quality requirements, including DLA packaging standards, physical identification and bare item marking, and specific sampling methods according to MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. The item is to be shipped via the fastest traceable means to the Marine Aviation Logistics Squadron 39 at Camp Pendleton, California. Additionally, the contract mandates compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and covered defense information regulations.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

INDICATOR, PRESSURE

Solicitation # SPE4A1-26-Q-0125

This solicitation, identified as SPE4A1-26-Q-0125, is issued by the Department of Defense Aviation Supply Chain for the procurement of 28 pressure indicators under NSN 6685-01-149-0590. The item is classified as a commercial off the shelf product and a critical application item, specifically identified by part number 7583420-101 from PTI Technologies Inc. and GE Engine Services Distribution. Item Unique Identification is not required per the request of the service customer. The contract specifies a delivery timeframe of 180 days after the order is placed, with a required delivery date of January 12, 2027. Shipping is FOB origin, and both inspection and acceptance will occur at the destination, which is the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for delicate instrument handling and palletization according to RP001.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPE4A1-26-Q-0120

Solicitation SPE4A1-26-Q-0120 is a firm fixed price request for quotations issued by DLA Aviation for the procurement of 230 units of Spacer, Plate, identified by NSN 5365-01-455-5763 and Lockheed Martin part number 398837-13. The requirement specifies that the material must be new, unused former government surplus property and does not have a shelf life requirement. Delivery is required within 88 days after receipt of order, with a material need ship date of June 26, 2027. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, where both inspection and acceptance will occur. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Award will be based on a best-value determination, weighing price, past performance, and PPIRS-SR assessments. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting under DFARS 252.204-7012. Quotations are due by September 8, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-Q-0119

This solicitation from the Department of Defense Aviation Supply Chain is for the procurement of eight angle brackets under part number 5340-01-419-2390. The contract requires delivery within 134 days after the order is placed, with performance located in Jacksonville, Florida. Compliance requirements are stringent, necessitating CMMC Level 2 certification from a Certified Third-Party Assessment Organization. Additionally, the item involves technical data subject to ITAR or EAR export controls. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification, complete specific Department of Defense training, and submit a DLA Export-Controlled Technical Data Questionnaire.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE