Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking Services

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors working with the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work involves providing specialized military-grade packaging and labeling for sensitive vehicular components. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for markings and labels, including the application of specific orientation labels using approved MIL-SPEC materials and equipment. The service provider is responsible for ensuring that all packaged shipments are fully prepared and ready for First Destination Transportation. This opportunity falls under NAICS code 488190, with a response deadline set for October 30, 2026.

General Info

MIL-SPEC packaging and marking services for DoD vehicular components due October 30, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-27-U-0071.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL, VEHICULAR OPERAT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized military-grade packaging and labeling for prime contractors on DLA Weapons Support LSO Combat Vehicles and Armament projects. Packages sensitive vehicular components per MIL-STD-2073-1E and applies markings and labels per MIL-STD-129, including specific orientation labels. Utilizes MIL-SPEC packaging materials and marking equipment. Delivers packaged shipments ready for First Destination Transportation.

Similar Contracts

Same NAICS industry code

Aerospace Component Packaging and DeliveryThis subcontract for Aerospace Component Packaging and Delivery supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and logistics for aircraft components, specifically Pan Assemblies, ensuring all items are packaged according to ASTM D3951 and RP001 standards. Additionally, the contractor is responsible for applying marking and labeling in compliance with MIL-STD-129 and RQ017 using approved labeling systems. The logistics portion of the contract requires the coordination of FOB Origin shipments delivered to the Fleet Readiness Center East located in Cherry Point, North Carolina. This effort falls under NAICS code 488190 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors delivering to the DLA Weapons Support ASC Supplier Oper OEM Division of the Department of Defense. The scope of work involves the specialized packaging of two cover assemblies to ensure they are ready for FOB Origin shipment. All work must be performed in Jacksonville, Florida, under NAICS code 488190. The contractor is required to adhere to strict military and industrial standards, including ASTM D3951 for component packaging, MIL-STD-129 for marking and labeling, and RP001 standards for palletization. These tasks must be executed using MIL-SPEC materials and industrial palletization equipment to meet the rigorous requirements of the agency.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing packaging materials and specialized marking and packing services for electrical lead assemblies supporting DLA Weapons Support ASC projects. The contractor is responsible for ensuring all work adheres to MIL-STD-2073-1E and MIL-STD-129 standards, specifically utilizing QUP:001, PRES MTHD:10, and CLNG/DRY:1. Additionally, all materials must be certified as mercury-free in compliance with NAVSEA 5100-003D and IP056. The scope of work requires the delivery of 57 units, fully packed and marked for shipment to DLA Distribution San Joaquin. Performance will take place in Tracy, California, under NAICS code 488190. The project is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

SENSOR, AMBIENT TEMPERA

Solicitation # SPE4A6-27-T-4551

Solicitation SPE4A6-27-T-4551 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 22 units of ambient temperature sensors (NSN 6685-01-443-4207). This commercial item acquisition requires delivery FOB Origin to DLA Distribution Jacksonville, Florida, with a required delivery date of June 14, 2027, and a delivery window of 171 days after the order. Quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by October 23, 2026. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129 for marking and labeling. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the procurement incorporates various FAR and DFARS clauses regarding cybersecurity, including DFARS 252.204-7012 for safeguarding covered defense information and CMMC Level 2 certification requirements. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPEFA5-27-T-0071

Solicitation SPEFA5-27-T-0071 is a request for quotations from the DLA Aviation at Cherry Point, North Carolina, for the procurement of six Eaton fittings, specifically part number 816-8D (NSN 4730LLNCC0143). This item is designated as a critical application item and has no shelf life requirement. The contract specifies a delivery timeline of 39 days after receipt of order, with an original required delivery date of October 15, 2026. Delivery terms are FOB Destination, with shipping directed to the Fleet Readiness Center DLA in Cherry Point, NC. The procurement is governed by NAICS code 488190 and incorporates various FAR and DFARS clauses, including the Buy American Act and the Berry Amendment. Quality and technical requirements are managed through the DLA Master List, with specific sampling requirements following MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and MIL-STD-130N(1). Inspection and acceptance will occur at the destination, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

SCREW ASSEMBLY, PANEL

Solicitation # SPE4A6-27-T-4574

Solicitation SPE4A6-27-T-4574 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of 44 units of Screw Assembly, Panel (NSN 5305015599487). The contract is established as a fixed-price supply agreement with delivery required within 171 days of award, utilizing FOB Origin terms under the First Destination Transportation program. The primary delivery location is DLA Distribution Jacksonville, Florida. Technical compliance is strictly governed by the DLA Master List of Technical and Quality Requirements, with specific packaging and marking mandates including ASTM D3951, RP001 for palletization, and MIL-STD-129 for labeling. Quality assurance is managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and adherence to DFARS cybersecurity and safeguarding standards for covered defense information. The solicitation deadline for quotations was October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

65664-11902-042

Solicitation # SPEFA5-27-T-0067

Solicitation SPEFA5-27-T-0067 is a federal procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the acquisition of one unit of a critical application item, specifically a Sikorsky Aircraft Corporation tube, part number 65664-11902-042 (NSN 4710LN0013767). The requirement is designated under NAICS code 488190. Delivery is required within 84 days after receipt of order, with a final required delivery date of April 12, 2027. The terms are FOB Destination, with both inspection and acceptance occurring at the destination point. The contract mandates strict adherence to quality and packaging standards. Manufacturers must maintain an inspection system complying with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Packaging must follow ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence, and all items must be marked and labeled per MIL-STD-129. Palletization must comply with RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and DFARS cybersecurity standards for safeguarding covered defense information.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

SHEET METAL AMSQQ-A-25

Solicitation # SPEFA5-27-T-0069

Solicitation SPEFA5-27-T-0069 is a fixed-price contract issued by the Defense Logistics Agency (DLA) Aviation at Cherry Point, North Carolina, for the procurement of sheet metal under NSN 9535LN0029818. The material must conform to specification AMS-QQ-A-250/4(2024-O) with specific dimensions of 0.032 inches by 48 inches by 144 inches. The requirement is for 12 units, with a delivery window of 5 days after the order and an original required delivery date of October 19, 2026. Delivery is FOB Destination to the Fleet Readiness Center East in Cherry Point, NC. The contract mandates strict quality and packaging standards, requiring a Certificate of Conformance and adherence to ASTM D3951 and MIL-STD-129 for marking and labeling. Palletization must comply with DLA packaging requirement RP001. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow (WAWF) system. The procurement also incorporates various DFARS and FAR clauses, including cybersecurity requirements under DFARS 252.204-7012 and domestic material restrictions such as the Buy American Act and the Berry Amendment.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPEFA5-27-T-0070

Solicitation SPEFA5-27-T-0070 is a fixed-price federal procurement issued by the DLA Aviation at Cherry Point, North Carolina, for the supply of 10 connectors. The specific requirement is for NSN 6150LN0035707, identified as Hi Rel Connectors, Inc. part number HRS-94-102606. Delivery is required within 84 days of award, with an original required delivery date of April 13, 2027. The terms are FOB Destination, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for general packaging and MIL-STD-129 for marking and labeling. Palletization must comply with RP001, and the manufacturer's inspection system must meet SAE AS9003 or ISO 9001 standards. There is no shelf life requirement for this material. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. Compliance requirements include the Buy American Act, the Berry Amendment, and various DFARS regulations regarding cybersecurity and the prohibition of certain telecommunications equipment. The solicitation is categorized under NAICS code 488190. Offerors must maintain active registration in the System for Award Management and provide representations regarding their socioeconomic status, including WOSB, SDVOSB, and HUBZone eligibility.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPEFA5-27-T-0068

Solicitation SPEFA5-27-T-0068 is a request for quotations issued by the Department of Defense, specifically the DLA Fleet Readiness Center in Cherry Point, North Carolina, for the acquisition of one unit of a critical application item. The item is identified as Sikorsky Aircraft Corporation part number 65213-05006-114, with NSN 1560LN0035873. The procurement falls under NAICS code 488190 and requires delivery FOB Destination to Cherry Point, NC, with an original required delivery date of April 12, 2027, and a delivery window of 84 days after order. The contract mandates strict quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, with acceptance based on zero non-conformances in the sample lot. Packaging must adhere to ASTM D3951, with marking and labeling per MIL-STD-129 and palletization according to DLA requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPEFA1-27-T-0012

Solicitation SPEFA1-27-T-0012 is a federal procurement issued by the Department of Defense, specifically DLA Aviation at San Diego, for the supply of one Skin Assembly, identified by NSN 1560LN0032017 and part number 123CS10527-604 from Northrop Grumman Systems Corporation. This is a critical application item with no shelf life requirement. The delivery is required within five days after receipt of order, with the FOB and inspection/acceptance points both set to destination. The item is to be delivered to the DLA Receiving Officer at Naval Base Coronado in San Diego, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All packaging must be labeled according to MIL-STD-129, and palletization must follow RP001 requirements. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. The procurement is subject to the Buy American Act and the Berry Amendment, and quotes must be submitted electronically via the DIBBS portal.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 23 hours ago

DEADLINE

Solicitation # SPEFA1-27-T-0011

Solicitation SPEFA1-27-T-0011 is a fixed-price procurement issued by the Defense Logistics Agency for one Tube Assembly, identified by NSN 4710LLNC14744 and part number 65664-11902-060 from Sikorsky Aircraft Corporation. This item is designated as a critical application item with no shelf life requirement. The contract specifies a delivery period of 84 days after award, with an original required delivery date of April 13, 2027. Delivery is FOB Destination to the Fleet Readiness Center DLA in Cherry Point, North Carolina. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and ASTM D3951 for packaging, though DLA Master List requirements take precedence. Inspection and acceptance will occur at the destination per FAR 52.246-2. Quality assurance requires a manufacturer's inspection system complying with SAE AS9003 or ISO 9001, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331 with a zero-nonconformance acceptance threshold. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American and Balance of Payments Program for quotes above the micro-purchase threshold. The solicitation is categorized under NAICS code 488190 and incorporates various DFARS and FAR clauses regarding cybersecurity, the safeguarding of defense information, and prohibitions on covered telecommunications equipment.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Military-Grade Packaging and Freight ServicesThis subcontract for Military-Grade Packaging and Freight Services supports prime contractors under the DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work involves specialized packaging, marking, and shipping of items to the DLA Distribution DDSP New Cumberland Facility. All activities must strictly adhere to military standards, specifically utilizing ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 guidelines for palletization. The contractor is responsible for providing MIL-SPEC packaging materials and managing FOB Origin shipping to ensure the secure delivery of palletized shipments. This requirement falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Manufacturer of 2.23 Caliber Orange Safety RoundsThis subcontract involves the manufacture and supply of 28 packages of 2.23 caliber orange safety indicators for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support LSO Combat Vehicles and Armament. The safety rounds must be produced according to NSN 1005-01-532-8133 and Safe Tech P/N STR223 specifications, utilizing orange-pigmented materials and precision machining or molding processes. The selected provider must ensure full compliance with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Domestic-Sourced Textiles for Vehicular Seat CoversThis subcontract involves the supply of domestic-sourced raw textile materials, fabrics, and industrial threads for the Department of Defense, specifically supporting DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work focuses on providing military-grade durable upholstery fabrics that adhere to technical requirements for NSN 2540014638394. To ensure compliance with the Berry Amendment and the Buy American Act, the provider must supply certifications of origin for all materials delivered to the manufacturer. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 313310, with performance taking place in New Cumberland, Pennsylvania. Interested parties must respond by October 26, 2026, to provide the necessary textile components required for the production of vehicular seat covers.

Textile and Fabric Finishing Mills

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Vehicular Seat Covers (NSN 2540014638394)This subcontract involves the fabrication and assembly of 322 vehicular seat covers for the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament project. The contractor is responsible for cutting, sewing, and assembling the covers in strict accordance with NSN 2540014638394, MIL-STD-1916, and MIL-STD-105/ASQ Z1.4. All materials used must be Berry Amendment compliant, and the contractor must utilize industrial sewing and textile cutting equipment to meet production requirements. Final deliverables must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 314999, with the place of performance located in New Cumberland. Interested parties must submit their responses by October 26, 2026.

All Other Miscellaneous Textile Product Mills

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament agency. The scope of work involves providing specialized military-grade packaging, labeling, and palletization for 15 units of hardware to ensure they are ready for destination inspection. The contractor is required to adhere to strict technical standards, including MIL-STD-129 for labeling, RP001 for palletization, and ASTM D3951 for commercial packaging. All work must be executed using DLA-approved materials and MIL-SPEC labeling equipment to meet the rigorous requirements of prime contractors.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Fabrication of Vehicular Splash GuardsThis subcontract involves the fabrication and supply of 15 vehicular splash guards and associated mounting brackets for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. All components must be manufactured according to Oshkosh Defense LLC part number 3554745 and adhere to the DLA Master List of Technical and Quality Requirements RA001. The project mandates strict adherence to the Buy American Act and the Berry Amendment, along with compliance with NIST SP 800-171 cybersecurity standards. The final deliverable consists of the completed splash guards and their corresponding brackets, with a response deadline set for October 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Defense Kitting and Packaging ServicesThe Defense Kitting and Packaging Services subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, requires the assembly and preparation of seat parts kits for prime contractors. The scope of work involves kitting individual components and ensuring all deliverables meet strict military specifications, specifically applying markings per MIL-STD-129 and adhering to MIL-STD-2073-1 Appendix D and RP001 palletization standards. The selected provider must utilize military-grade packaging materials to deliver fully kitted, marked, and palletized units ready for final shipment. This opportunity falls under NAICS code 488410, with a response deadline set for October 30, 2026.

Motor Vehicle Towing

POSTED

about 23 hours ago

DEADLINE

Vehicular Seat Parts Kit ManufacturingThis subcontract involves the manufacturing and sourcing of components for the Vehicular Seat Parts Kit, identified by NSN 2540-01-683-6295, to support prime contractors fulfilling DLA supply contracts. The scope of work includes providing hardware, fasteners, and brackets in strict accordance with the DLA Master List of Technical and Quality Requirements. All deliverables must comply with the Buy American Act and the Berry Amendment, and the use of additive manufacturing is prohibited unless specific authorization is granted. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, the contract falls under NAICS code 336360. Interested parties must submit responses by October 30, 2026, to provide the completed vehicular seat parts kits as required.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 23 hours ago

DEADLINE

Final Assembly and Integration of Barrel Guard AssemblyThis subcontract, issued by the Department of Defense under DLA Weapons Support, requires the final assembly and integration of four MNT, YK, BRL GUARD AY units. The selected contractor must integrate sub-components according to Basic Drawing 30003 3392AS247 and ensure all final inspection and packaging adhere to ASTM D3951 and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania. The opportunity is a total small business set-aside under NAICS code 332994. To be eligible, contractors must maintain ISO 9001/AS9003 certification, CMMC Level 2, and full ITAR/EAR compliance. The response deadline for this requirement is October 26, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Qualified Products List (QPL) Hardware/ComponentsThis subcontract opportunity is for the supply of specialized hardware and components to support prime contractors on DLA Weapons Support projects. The selected provider must source and deliver components that strictly adhere to specifications QPL-53022-14, QPL-53030-7, QPL-53039-22, and QPL-64159-13. A critical requirement for this contract is the ability to provide official QPL/QML status certification for all supplied hardware, along with maintaining CMMC Level 2 compliance. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, this is a total small business set-aside under NAICS code 423830. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of October 26, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Precision Machining of Barrel Guard Assembly ComponentsThis subcontract opportunity is for the precision machining, milling, and turning of metal components for barrel guard assemblies supporting DLA Weapons Support projects. The selected contractor will be responsible for fabricating parts according to Technical Data Package Rev B Gen 2 and specific reference drawings, including 30003 3392AS247, utilizing CNC milling and turning equipment to deliver finished components and PVT samples. The project is a total small business set-aside under NAICS code 332710 and is managed by the Department of Defense. To be eligible, contractors must hold ISO 9001 or SAE AS9003 certification and maintain CMMC Level 2 and ITAR/EAR compliance. The performance location is situated in New Cumberland, Pennsylvania, with a response deadline of October 26, 2026.

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Access Covers (NSN 1005-01-690-4491)This subcontract involves the manufacture and supply of two precision-machined access covers, identified by NSN 1005-01-690-4491, for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament. The components must be fabricated using precision CNC machining to meet strict aerospace and defense tolerances, adhering specifically to TDP Rev A Gen 1 and Barrett Firearms Manufacturing P/N 32423. The project requires strict adherence to Department of Defense standards, including supply chain traceability per DLAD Procurement Note C003 and packaging requirements outlined in MIL-STD-2073-1E. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332994, with a response deadline of October 26, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS