Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Marking Services

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors under the DLA Weapons Support ASC. The scope of work involves specialized packaging and marking of components in strict accordance with MIL-STD-2073-1E and RP001, specifically utilizing Preservative Method 33 and Wrap Material B. Additionally, the provider must apply markings per MIL-STD-129 and ensure all palletization meets RP001 standards. The final deliverable consists of 32 palletized brackets prepared for FOB Origin shipment. Performance will take place in San Diego, California, under NAICS code 561910. The opportunity was posted on October 13, 2026, with a response deadline of October 21, 2026.

General Info

MIL-SPEC packaging and marking of 32 palletized brackets for DLA in San Diego.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

561910 - Packaging and Labeling Services

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1144.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRACKET, RIGGING PIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking for prime contractors on DLA Weapons Support ASC supply contracts. Packages components per MIL-STD-2073-1E and RP001, including Preservative Method 33 and Wrap Material B. Applies markings per MIL-STD-129 and performs palletization per RP001 standards. Delivers 32 palletized brackets ready for FOB Origin shipment.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider is responsible for performing specialized packaging and marking in strict accordance with ASTM D3951 and MIL-STD-129 for palletization. Additionally, the contractor must apply identification marking using MIL-SPEC materials and labeling systems as required by MIL-STD-130N. The scope of work includes the coordination and delivery of fully packaged, marked, and palletized shipments to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThis subcontract for Defense-Compliant Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and performing final packing and labeling for 13 units. All work must adhere to ASTM D3951 and RP001 standards for packing and MIL-STD-129 for labeling to ensure compliance for delivery to DLA Distribution DDSP New Cumberland. The service provider is responsible for preparing shipments specifically for the First Destination Transportation program, with delivery handled as FOB Origin. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 561910, with performance taking place in New Cumberland.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Military Specification Packaging and Marking ServicesThis subcontract for Military Specification Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support ASC Commodities Division. The selected provider will perform final packaging and marking of critical hardware for prime contractors, ensuring all items are processed according to MIL-STD-2073-1E Preservation Method 31 and marked per MIL-STD-129. The primary objective is to utilize standardized military labeling equipment to prevent corrosion during transit to DLA Distribution New Cumberland. The project is categorized under NAICS code 561910 and requires the delivery of finished products that are fully prepared for government acceptance. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, while palletization must meet DLA requirement RP001. Additionally, the contractor is responsible for cleaning, drying, and preservation processes in accordance with PRES MTHD;31 CLNG/DRY. The specific deliverable for this engagement is the packaging and palletization of 55 sleeve spacers, which are to be delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 561910 and is managed through the DLA Weapons Support ASC.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves providing packaging materials and executing the packing, marking, and labeling of items to ensure they are shipment-ready for delivery to Sweihan Air Base, AE. All services must adhere to strict regulatory standards, including ASTM D3951 and RP001 for packaging, and MIL-STD-129 and 29 CFR 1910.1200 for marking and labeling. The contractor is required to utilize labeling systems that are fully compliant with MIL-STD-129. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves providing military-grade packaging and marking for precision fasteners in New Cumberland, Pennsylvania. All services must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, utilizing preservation method 31 and cleaning/drying standard 1 with specified BLL unit containers. The contractor is responsible for using MIL-SPEC marking equipment and label printers to ensure all shipments are fully processed and ready for transport. This opportunity falls under NAICS code 561910, with a response deadline set for October 21, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors delivering supply contracts to the DLA Weapons Support ASC Commodities Division. The scope of work involves performing specialized military-grade packaging, preservation, and marking of hardware to ensure shipments are fully prepared for transport. All activities must strictly adhere to DLA RP001 for packaging, MIL-STD-129 and MIL-STD-2073-1E for markings, and preservation method 33. The service provider is required to utilize MIL-STD-2073-1E compliant materials and specialized MIL-STD-129 labeling equipment. Performance of the contract will take place in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 561910 and was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing military packaging and marking in strict accordance with MIL-STD-2073-1E and MIL-STD-129 using Special Marking Code 32. Additionally, the contractor is responsible for applying Bare Item Marking per RQ017 to individual units and palletizing shipments according to RP001 standards to ensure they are ready for FOB Origin transport. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB. Classified under NAICS code 561910, the opportunity was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ProviderThis subcontract involves providing specialized packaging, marking, and labeling services for precision hardware to support prime contractors on DLA Weapons Support ASC projects. The scope of work requires strict adherence to industry and military standards, specifically packaging screws according to ASTM D3951 and RP001, and implementing marking and labeling in compliance with MIL-STD-129 and Hazard Communication Standards. The selected provider will utilize MIL-STD-129 compliant labeling systems to ensure all products are fully prepared for shipment. The final deliverables consist of finished, packaged, and labeled hardware ready for delivery to Tinker AFB. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging and shipping for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to military standards, including labeling per MIL-STD-129, palletization per RP001, and packaging for non-hazardous materials according to ASTM D3951. The contractor must utilize MIL-SPEC labeling equipment and standardized cushioning materials while ensuring all shipping documentation is fully traceable. The specific deliverable for this engagement is the packaging and palletized shipment of 2,000 lenses to be delivered to Columbus, Ohio. This project falls under NAICS code 561910 and is managed through the Department of Defense. Interested parties should note the response deadline of October 26, 2026.

Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Electrostatic Discharge (ESD) Packaging ServicesThis subcontract, issued by the DLA Weapons Support Active Devices Division, requires the provision of specialized electrostatic discharge packaging services for sensitive electronic components. The contractor must utilize MIL-PRF-81705 materials and operate within MIL-HDBK-773 compliant ESD workstations to ensure component integrity. All operations must adhere to MIL-STD-2073-1E procedures and MIL-STD-129 marking standards, with a strict prohibition on the use of Class I ozone-depleting chemicals. The project is designated as a Total Small Business Set-Aside under NAICS code 561910. Final deliverables consist of securely packaged and marked components shipped to Tinker AFB. Interested parties must respond by October 26, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Specialized Metal Stock SupplyThe Specialized Metal Stock Supply subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the procurement of certified raw metal stock for prime contractors. The scope of work requires the sourcing and delivery of bar stock or billets that strictly adhere to NSN 5365-01-428-6608 material specifications. To guarantee purity and grade, the provider must supply Material Test Reports or Certificates of Conformance. Performance for this contract will take place in New Cumberland, Pennsylvania. A critical compliance requirement is adherence to DFARS 252.225-7001 Buy American regulations. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026, falling under NAICS code 423510.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Precision Machining of Machine Thread BushingsThis subcontract involves the precision machining and fabrication of four machine thread bushings to meet NSN 5365-01-428-6608 specifications. The work is performed for prime contractors supporting DLA supply contracts and requires the use of CNC lathes or mills. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710 for the Department of Defense. The contractor must maintain quality inspection systems compliant with SAE AS9003 or ISO 9001. Strict adherence to ITAR, EAR, and DFARS 252.225-7001 regulations is mandatory. The final deliverable consists of four finished, inspected, and packaged bushings.

POSTED

about 23 hours ago

DEADLINE

Supply of Electrical Conductor Strain Clamps (NSN 5975-01-606-3466)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Aerospace-Grade Ducting Material SupplyThis subcontract involves the supply of raw aerospace-grade metals and alloys for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must source materials that strictly adhere to specifications outlined in TDP EI-011626533 and deliver them with full traceability documentation, including Mill Test Reports and Certificates of Conformance. To ensure compliance with federal regulations, all materials must be of domestic origin in accordance with the Buy American Act and the Berry Amendment. Managed by the Department of Defense under NAICS code 332999, the contract focuses on the delivery of certified raw materials for aerospace ducting. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 21, 2026, for this procurement effort.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

Precision HVAC Duct Assembly Fabrication (Aerospace/Defense)This subcontract involves the fabrication and assembly of four Air Conditioning-Heating Duct Assemblies for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing components in strict accordance with TDP EI-011626533 and Basic Drawing NR 81755 16Y213, ensuring the proper integration of all part piece numbers as specified in the reference drawings. To be eligible, the provider must maintain JCP certification for technical data access and adhere to either SAE AS9003 or ISO 9001 quality systems. The project is categorized under NAICS code 336413, with performance taking place in New Cumberland. The response deadline for this requirement is October 21, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supplier of Electrical Insulating Compound Kits (NSN 5970-01-086-3433)

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of PACCAR Winch Spacer PlatesThis subcontract involves the procurement and supply of 77 PACCAR Winch Inc spacer plates, part number 25729 and NSN 5365013723862, to support prime contractors on DLA Weapons Support ASC projects. The Department of Defense requires that all materials be free of intentionally added mercury and strictly adhere to specific military standards for packaging, marking, and palletization, specifically MIL-STD-2073-1E, MIL-STD-129, and RP001. The completed order is to be delivered to Arizona Industries for the Blind located in Phoenix, Arizona. This requirement falls under NAICS code 423840 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Division.

Industrial Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Supply of Aerospace-Grade Metal StockThis subcontract involves the sourcing and delivery of aerospace-grade raw metal stock, specifically bars, rods, or tubing, to support prime contractors fulfilling DLA supply contracts. The materials must strictly adhere to alloy and grade requirements for NSN 5365-01-677-7476 and must be delivered to the manufacturer with accompanying Mill Test Reports to ensure full material traceability. Compliance with the Buy American Act and the Berry Amendment is mandatory for all supplied materials. The contract is managed under NAICS code 423510 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Straight Spacers (NSN 5365-01-677-7476)This subcontract involves the precision machining of 98 finished and inspected straight spacers under NSN 5365-01-677-7476 for the Department of Defense, specifically the DLA Weapons Support ASC. The manufacturer must utilize CNC machining centers and precision lathes to meet the DLA Master List of Technical and Quality Requirements. All materials used in production must be compliant with the Berry Amendment and the Buy American Act. To be eligible, the contractor must hold CMMC Level 2, JCP certification, and either ISO 9001 or SAE AS9003 certification. The work is categorized under NAICS code 332710 and will be performed in Tracy, California. Responses to this solicitation are due by October 21, 2026.

POSTED

about 23 hours ago

DEADLINE

Aerospace Component Finishing and PlatingThis subcontract for Aerospace Component Finishing and Plating supports prime contractors under the DLA Weapons Support Agency. The scope of work involves providing specialized surface treatment and plating for aerospace components, specifically requiring the application of finishes and coatings in accordance with Drawing 65651-06358 Rev H. To ensure safety and regulatory compliance, the provider must supply Safety Data Sheets for all hazardous materials per Federal Standard No. 313 and obtain ITAR/EAR export control approval to access necessary technical data. Managed under NAICS code 332813 for the Department of Defense, the contract requires the delivery of finished components that strictly meet all drawing specifications. The place of performance is located in Dulles, Virginia. Interested parties should note the response deadline of October 21, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 23 hours ago

DEADLINE

Precision Machining and Fabrication of Cover Unit, Pin PullerThis subcontract involves the precision machining and fabrication of ten Cover Unit Pin Pullers for prime contractors supporting the DLA Weapons Support Agency. The manufacturer must produce the units in strict accordance with Drawing 65651-06358 Rev H, utilizing SS8798 material as specified in TDP Rev A Gen 4. Quality assurance is mandatory, with inspections required per MIL-STD-1916 or ASQ H1331 and marking compliant with RQ017. The project is managed under the Department of Defense and requires the contractor to maintain CMMC Level 2 certification and hold ITAR/EAR export control approval. Performance will take place in Dulles, Virginia, under NAICS code 336413. Interested parties must respond by October 21, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS