Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Preservation Services

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and Preservation Services involves providing specialized preservation and packaging for 181 units of bearings intended for DLA supply contracts. The work must be executed in strict accordance with MIL-DTL-197M and MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking. To ensure a 36-month shelf life, the contractor is required to utilize desiccants and corrosion inhibitors, with quality assurance verification performed per Section 4 of MIL-DTL-197M. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in Cherry Point, zip code 28533-5040. The opportunity was posted on October 15, 2026, with a response deadline of October 23, 2026, falling under NAICS code 488410.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

488410 - Motor Vehicle Towing

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-4400.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, BALL, ANNULAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and preservation for prime contractors delivering DLA supply contracts. Executes packaging per MIL-DTL-197M and MIL-STD-2073-1E, and marking per MIL-STD-129. Utilizes corrosion inhibitors and desiccants to maintain a 36-month shelf life. Ensures quality assurance verification per Section 4 of MIL-DTL-197M. Delivers 181 units of preserved and marked bearings.

Similar Contracts

Same NAICS industry code

Packaging and Palletization for DLA Aerospace HardwareThis subcontract involves providing military-grade packaging and palletization services for critical aerospace hardware supporting the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all hardware is packaged according to ASTM D3951 and marked in compliance with MIL-STD-129. Additionally, the scope includes executing palletization per RP001 and applying necessary hazard labels as mandated by DFARS 252.223-7001. The final deliverables consist of shipping-ready pallets delivered to the DLA Distribution Depot located at Tinker AFB. This requirement falls under NAICS code 488410 and is managed under the Department of Defense. Interested parties must adhere to the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and FulfillmentThis subcontract involves providing specialized military packaging services for the Department of Defense, specifically for the DLA Weapons Support Fluid Handling Division. The scope of work requires the sealing of 848 O-rings in medium duty, waterproof, greaseproof, and opaque bags. All work must be performed using industrial sealing equipment in strict accordance with RP001, MIL-DTL-117, and MIL-STD-2073-1E packaging data guidelines. The completed items are to be delivered ready for shipment to DLA Distribution Warner Robins, with the place of performance located at Robins Air Force Base. The project is categorized under NAICS code 488410, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and LogisticsThis subcontract for MIL-SPEC Packaging and Logistics supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized military packaging and marking in strict accordance with MIL-STD-2073-1E and MIL-STD-129, as well as palletizing shipments to meet RP001 requirements. The selected provider is responsible for the transportation and delivery of finished, compliant goods to DLA Distribution Red River Receiving in Texarkana, Texas. This effort falls under NAICS code 488410 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging and palletization services for the DLA Weapons Support Nuclear Reactor Program. The scope of work requires the processing of 28 terminal boards, ensuring all units are packaged according to MIL-STD-2073-1E, marked per MIL-STD-129, and palletized following RP001 standards. The contractor must utilize MIL-SPEC cushioning and unit containers to prepare the items for FOB Origin shipment. The final deliverables are destined for DLA Distribution New Cumberland, located in New Cumberland, Pennsylvania. This effort falls under NAICS code 488410 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of October 26, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors under the DLA Weapons Support ASC Commodities Division of the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically adhering to ASTM D3951 for packaging, MIL-STD-129 for labeling, and MIL-STD-130N(1) for identification marking. Additionally, the provider must execute palletization following RP001 DLA Packaging Requirements for Procurement to ensure all shipments are fully prepared for FOB Origin transport. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 488410. Interested parties should note the posting date of October 15, 2026, with a response deadline set for October 22, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

MIL-PRF-81705 Compliant ESD/EMI Packaging ServicesThis subcontract opportunity is for the provision of MIL-PRF-81705 compliant ESD/EMI packaging services to support the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform specialized handling and packaging of electronic components, specifically circuit card assemblies, using approved field force protective work stations. Requirements include the application of Type I and Type III barrier wraps and adherence to MIL-STD-129 Special Marking Code 39 to ensure all items are certified and ready for shipment to prime contractors. The project is designated as a Total Small Business Set-Aside under NAICS code 488410 and will be performed in Tracy, California. Interested parties must submit their responses by October 26, 2026. This effort is managed by the Department of Defense on behalf of the DLA Weapons Support Nuclear Reactor Program.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the military-grade packaging and preservation of critical aerospace components, specifically bearings, ensuring they are ready for FOB Origin shipment. All activities must strictly adhere to MIL-DTL-197M and MIL-STD-2073-1E using preservation method ZZ, with shipment marking performed in accordance with MIL-STD-129 and RP001. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed at Hill AFB. Interested parties should note the response deadline of October 23, 2026. The contract is categorized under NAICS code 488410.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging and marking for critical valve housings intended for prime contractors under DLA supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards, specifically implementing packaging data QUP:001 and RP001 to ensure proper cushioning and preservation. The project entails the preparation and delivery of 15 units to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the contract falls under NAICS code 488410.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Cleanliness ControlThis subcontract for Navsup Weapon Systems Support Mech involves providing specialized cleaning and packaging services for Hybrid Gaskets. The contractor is responsible for executing packaging in accordance with MIL-PRF-23199 and MIL-STD-2073, utilizing heat-sealing equipment and MIL-DTL-24466 Green Poly Bags to ensure all deliverables are certified, packaged, and labeled correctly. Strict adherence to cleanliness controls is required, specifically following MIL-STD-767 and MIL-STD-2041 to meet Refueling or Reactor Plant Clean standards. This Department of Defense project was posted on October 15, 2026, with a response deadline of November 13, 2026, falling under NAICS code 488410.

Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

MIL-STD Compliant Packaging and ShippingThis subcontract involves providing specialized military-grade packaging and shipping services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work requires the packaging of components, specifically gaskets, in strict accordance with MIL-STD-2073, with all marking and labeling adhering to MIL-STD-129 standards. The contractor is responsible for managing specific shelf-life requirements and coordinating FOB Destination shipping to ensure the secure delivery of fully packaged and labeled materials. This opportunity falls under NAICS code 488410, with a response deadline set for November 12, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 9 hours ago

DEADLINE

Evidence Towing, Recovery, and Secure Storage ServicesThis subcontract for the Department of the California Highway Patrol involves providing skilled recovery and transport services for collision scenes and impounded vehicular evidence in San Joaquin. The selected provider will be responsible for transporting vehicles to secure facilities, managing daily storage for both passenger and commercial vehicles, and facilitating necessary inspections. To qualify, contractors must utilize tow trucks equipped with recovery and wheel lift capabilities that meet CHP 234B standards and possess valid MCP permits. The primary objective of the contract is to ensure the safe recovery, transport, and secure storage of all evidence vehicles on behalf of prime contractors.

Department of the California Highway Patrol

POSTED

about 23 hours ago

DEADLINE

IFB 26C266000 CHP Tracy Area office Evidence Impound Tow and Storage Services

Solicitation # 26C266000

The Department of the California Highway Patrol is soliciting bids for Invitation for Bids 26C266000 to provide evidence impound tow and storage services for the Tracy Area office. The contract, which has a budgeted value of 49,999.00 dollars, is anticipated to run from December 1, 2026, to November 30, 2028. The selected contractor will be responsible for performing skilled recovery and cleanup of collision scenes, transporting and securing vehicular evidence, and providing safe storage for impounded vehicles within specified geographical regions in San Joaquin, California. Award of the contract will be based on the lowest cost offered by a responsive and responsible bidder, with adjustments applied for Small/Micro Business and Disabled Veteran Business Enterprise preferences. Bidders must submit a physical, sealed bid package by October 28, 2026, containing all required certifications, including the Bid Form, Client References, and Conflict of Interest and Confidentiality statements. The contractor must utilize personnel with appropriate security clearances and maintain tow trucks that meet state and federal standards, including specific recovery and wheel lift capabilities. The California Highway Patrol will conduct mandatory annual inspections and may perform unannounced inspections to ensure equipment compliance. Payment will be made based on actual costs for services rendered, including light, medium, and heavy-duty tow rates, as well as storage and vehicle inspection fees.

Department of the California Highway Patrol

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Certified Aerospace Alloy StockThis subcontract involves the supply of certified aerospace-grade raw metal alloy stock, specifically in the form of bars or wire, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties outlined in NASM20426, NASM5674, and drawing NR 13873. To ensure quality and regulatory compliance, the provider must deliver full material traceability and Mill Test Reports, while guaranteeing that all material origins comply with the Berry Amendment and the Buy American Act. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located at Tinker AFB. Interested parties must respond by October 23, 2026, to provide the certified raw material stock directly to the manufacturer.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 4 hours ago

DEADLINE

Manufacture of Solid Rivets (NSN 5320-00-638-9059)This subcontract involves the manufacture of solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of rivets according to standards NASM20426, NASM5674, and drawing NR 13873 EI-006389059, utilizing precision cold-heading or machining equipment. A total of 4 lbs of finished rivets must be delivered, packaged in accordance with ASTM D3951 and MIL-STD-129, with performance taking place at Tinker AFB. Qualified providers must hold SAE AS9003 or ISO 9001 quality certification and ensure full compliance with the Buy American Act and the Berry Amendment. The use of additive manufacturing is strictly prohibited for this contract. Interested parties should note the response deadline of October 23, 2026, for this Department of Defense requirement under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 4 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of critical pump components, specifically three sleeve bearings, ensuring full compliance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Technical requirements include the application of preservation method 33, cleaning and drying method 1, and the use of G8 wrap material, utilizing specialized military-grade marking equipment. The completed deliverables are to be shipped to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 488510 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Sleeve Bearings (NSN 3120-00-336-9385)This subcontract involves the manufacture and supply of three precision-machined sleeve bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be produced according to NSN 3120-00-336-9385 specifications and adhere to the DLA Master List of Technical and Quality Requirements RA001. To ensure quality and safety, the manufacturer must use precision equipment to guarantee materials are mercury-free and maintain certification in SAE AS9100, SAE AS9003, or ISO 9001. The project is categorized under NAICS code 332991, with performance taking place in New Cumberland. The finished sleeve bearings are to be delivered FOB Origin. Interested parties must respond by October 23, 2026, regarding this Department of Defense requirement.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

Annular Ball Bearing Supplier (NSN 3110008522646)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the procurement of 53 annular ball bearings under NSN 3110008522646. The supplier is responsible for manufacturing or sourcing bearings that match Part Number 890666-6, ensuring all units undergo bare item marking per RQ017 and adhere to preservation and packaging standards defined by MIL-DTL-197M and MIL-STD-129. Delivery is specified as FOB Origin, with the place of performance located in San Diego. To qualify, the contractor must maintain ITAR compliance and utilize inspection systems certified under ISO 9001 or SAE AS9003. This opportunity is designated as a Total Small Business Set-Aside under FAR 19.5, falling under NAICS code 332510. Interested parties must submit their responses by October 23, 2026.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Defense-Compliant Packaging and Marking ServicesThe Defense-Compliant Packaging and Marking Services subcontract involves providing specialized packaging, marking, and labeling for aerospace hardware intended for prime contractors delivering DLA supply contracts. The scope of work requires the delivery of packaged and labeled pins, ensuring all processes adhere to ASTM D3951 for packaging and MIL-STD-129 and DLA requirement RP001 for markings and labels. The service provider must utilize military-standard labeling systems and possess a thorough understanding of the DLA Master List of Technical and Quality Requirements. This opportunity is issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. The contract is categorized under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Plain Tapered Pins (NSN 5315-01-171-2305)This subcontract involves the manufacture of 44 plain tapered pins under NSN 5315-01-171-2305 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires precision machining and forming using CNC turning or grinding equipment to deliver finished pins. Performance must align with zero-based sampling plans and the DLA Master List of Technical and Quality Requirements. Qualified providers must hold SAE AS9003 or ISO 9001 certification and maintain approval through the US/Canada Joint Certification Program for ITAR and EAR compliance. The project is associated with NAICS code 332510, with the place of performance located at Tinker AFB. Responses are due by October 23, 2026.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

Manufacturer of Self-Locking Hexagonal Nuts (NSN 5310-00-060-2039)This subcontract involves the manufacture of 4,031 self-locking hexagonal nuts under NSN 5310-00-060-2039 for the DLA Weapons Support ASC Commodities Division. The components must be produced using cold-heading or precision CNC machining, ensuring strict adherence to Class 3A and 3B thread conformance per FED-STD-H28/20 and marking requirements per MIL-STD-130N. Final delivery of the conforming units is required FOB Origin to Tinker AFB. To qualify, the manufacturer must maintain CMMC Level 2 certification and a recognized quality management system, specifically ISO 9001 or SAE AS9003. The project falls under NAICS code 332722, with a response deadline set for October 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Supplier of Self-Locking Hexagon Nuts with Extended WashersThis subcontract involves the supply of 44 units of self-locking hexagon nuts with extended washers for prime contractors supporting DLA supply contracts. The items must be manufactured or sourced according to NSN 5310-01-589-9865 and must be produced without the use of hexavalent chromium. Delivery is specified as FOB Origin, with performance taking place in New Cumberland. The contractor is required to adhere to strict quality assurance and packaging standards, utilizing MIL-STD-1916 or ASQ H1331 for sampling and ASTM D3951 and MIL-STD-129 for packaging and labeling. This requirement is issued under the Department of Defense through the DLA Weapons Support ASC Commodities Division under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Manufacture of Threaded Pin-Rivet Collars (NSN 5320-01-117-4256)This subcontract involves the manufacture of 2,168 certified aerospace threaded pin-rivet collars under NSN 5320-01-117-4256 for the DLA Weapons Support ASC Commodities Division. The components must be produced to BACC30AG6 or HL82-6APBW specifications for critical applications, with precision machining and forming conducted according to MIL-STD-1916 or ASQ H1331 zero-based sampling plans. All items must be marked per RQ017 and delivered to Tinker AFB. The project requires strict adherence to the Buy American Act and the Berry Amendment. Interested parties must respond by October 23, 2026, for this Department of Defense requirement categorized under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Aerospace/Defense Grade Alloy SupplyThis subcontract for Aerospace/Defense Grade Alloy Supply involves the procurement of raw metal stock, such as bars, rods, or forgings, to support prime contractors on DLA Weapons Support ASC projects. The scope of work requires the sourcing and certification of raw materials that meet specific metallurgical requirements for NSN 5305015138895, with a mandate to provide Mill Test Reports to verify compliance with the Berry Amendment and the Buy American Act. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the contract falls under NAICS code 327992. The selected provider is responsible for delivering the certified raw material stock directly to the manufacturer, with the place of performance located in New Cumberland, Pennsylvania.

Ground or Treated Mineral and Earth Manufacturing

POSTED

about 4 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS