Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Packaging and Preservation Services

Open

Federal

Response Deadline11/13/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for MIL-SPEC Packaging and Preservation Services involves the preservation, packaging, and marking of critical aerospace components for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to MIL-DTL-197M for preservation, as well as MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. All operations must be conducted in a facility that meets the quality assurance verification requirements specified in Section 4 of MIL-DTL-197M to ensure bearings are delivered ready for shipment. The project is categorized under NAICS code 488190 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 13, 2026, for this Department of Defense requirement.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9422.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, PLAIN, ROD END

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM ESTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs preservation, packaging, and marking of critical aerospace components for prime contractors on DLA Weapons Support ASC projects. Applies preservation per MIL-DTL-197M and executes packaging and marking per MIL-STD-2073-1E and MIL-STD-129. Utilizes a facility meeting MIL-DTL-197M Section 4 quality assurance verification requirements. Delivers preserved and packaged bearing ready for shipment.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging and Palletization Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for the DLA Weapons Support Land Supply Chain involves providing specialized preservation, packaging, and marking services for two mounting plates. The contractor is responsible for executing all work in strict accordance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and Preservation Method 10. A critical safety requirement is the total prohibition of mercury or mercury compounds during the process, and the service provider must hold formal certification in MIL-STD packaging standards. The project is managed under NAICS code 488190 and will be performed in Tracy, California. Interested parties must respond by November 16, 2026, to support prime contractors in meeting Department of Defense specifications for the delivery of these components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and International ShippingThis subcontract, titled MIL-SPEC Packaging and International Shipping, involves providing specialized military-grade packaging and logistics services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires packaging components in strict accordance with MIL-STD-2073-1E and RP001 DLA requirements, with all shipments marked according to MIL-STD-129 standards. The contractor is responsible for managing FOB Destination delivery of properly marked and packaged panels to the U.S. Naval Air Station Sigonella in Italy. This project falls under NAICS code 488190 and is managed by the Department of Defense. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors delivering supply contracts for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work involves specialized packaging, marking, and palletization of electronic equipment to ensure full compliance with MIL-STD-129 and MIL-STD-2073-1E standards. All materials used must adhere to RP001 DLA Packaging Requirements for Procurement to ensure shipments are fully prepared for transport. The project is categorized under NAICS code 488190 and will be performed in Lemoore, California. Interested parties should note the response deadline of November 13, 2026, following the posting date of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Military-Spec Packaging and Palletization ServicesThis subcontract for Military-Spec Packaging and Palletization Services supports prime contractors on DLA Weapons Support projects. The scope of work involves specialized packaging, labeling, and palletization of items to ensure full compliance with military standards, specifically ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for DLA procurement requirements. The service provider is required to utilize military-grade materials and compliant labeling systems to deliver fully prepared shipments. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in Tracy, California. The opportunity was posted on November 6, 2026, with a response deadline of November 13, 2026. It is categorized under NAICS code 488190.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Specialized Aerospace Freight Transport

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Traceable Shipping and Delivery to USS MASSACHUSETTSThis subcontract involves the traceable transport and delivery of sensitive electronic components for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work requires the coordination of shipments through traceable means for final delivery to the USS MASSACHUSETTS (SSN 798) via the DLA MPC in Norfolk, Virginia. The contractor must utilize secure shipping and tracking systems appropriate for a military port and MPC environment to ensure the items reach the end-user vessel safely. Managed under the Department of Defense, the project falls under NAICS code 488190. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. Performance of the contract is designated for FPO 09592-7400.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and LabelingThis subcontract for Military-Grade Packaging and Labeling supports prime contractors on DLA Weapons Support projects. The scope of work involves the packaging, marking, and palletization of materials, with non-hazardous items processed according to ASTM D3951 and hazardous materials handled per TQ Requirement IP025. All shipments must be marked and labeled in compliance with MIL-STD-129 and palletized according to RP001 standards. The final deliverables are to be transported to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This opportunity is managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, falling under NAICS code 488190. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

SLEEVE AND SLIDE, DIRE

Solicitation # SPEFA5-27-T-0176

This fixed-price contract, issued by the DLA Aviation at Cherry Point, North Carolina, is for the procurement of eight units of Sleeve and Slide, Directional Control V (NSN 1650LLNCC7759), identified as a critical application item from Eaton Aerospace, LLC. The delivery is required within 23 days after receipt of order, with shipping terms set as FOB Destination. Delivery and inspection will take place at the Fleet Readiness Center DLA in Cherry Point, NC. The contract mandates strict quality and packaging standards, requiring adherence to the DLA Master List of Technical and Quality Requirements, MIL-STD-130N for identification marking, and ASTM D3951 for packaging. Quality assurance involves a zero-based sampling plan according to MIL-STD-1916 or ASQ H1331. Administratively, the contractor must use the Wide Area WorkFlow (WAWF) system for invoicing and payment. Key regulatory requirements include compliance with the Buy American Act, NIST SP 800-171 for cybersecurity, and various FAR and DFARS clauses regarding small business representation and the safeguarding of covered defense information.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPEFA5-27-T-0180

This solicitation, issued by the DLA Aviation at Cherry Point, North Carolina, is for the procurement of 150 cushions, identified by NSN 5330LN0027799 and part number SPD65E-1701-034 from Container Research Corp. The contract requires delivery within 39 days on a FOB Destination basis, with both inspection and acceptance occurring at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is subject to strict technical and quality standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and marking requirements per RQ017 and MIL-STD-129. Packaging must adhere to ASTM D3951 and RP001, though the DLA Master List of Technical and Quality Requirements takes precedence. Key regulatory compliance includes FAR 52.246-2 for destination inspection, DFARS 252.225-7001 regarding the Buy American program, and various cybersecurity and hazardous material labeling mandates. The solicitation is categorized under NAICS code 488190 and may be eligible for automated award.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 5 hours ago

DEADLINE

NUT, SELF-LOCKING, ROUND

Solicitation # SPE4A6-27-T-9839

Solicitation SPE4A6-27-T-9839 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the supply of 11 round self-locking nuts, identified by NSN 5310144788392. The contract is categorized under NAICS code 488190 and is managed as a simplified acquisition. Key delivery milestones include a need ship date of May 4, 2027, and an original required delivery date of October 30, 2027, with the final destination for inspection and acceptance located at DLA Distribution Jacksonville, Florida. The procurement mandates strict adherence to technical and quality requirements found in the DLA Master List, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessments, and prohibitions on covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Shoulder Screw Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 371 shoulder screws, identified by NSN 5305017223405, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division. All hardware must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict adherence to technical and quality standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. Additionally, the provider must maintain a quality management system compliant with either SAE AS9003 or ISO 9001. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

Spring (Heavy Gauge) Manufacturing

POSTED

about 5 hours ago

DEADLINE

Machine Bolt Supplier (NSN 5306-0133-73780)This subcontract involves the supply of 11 machine bolts identified by NSN 5306013373780 for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing the bolts to ensure they meet all required material specifications. Additionally, the contractor must provide Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The contract falls under NAICS code 333318 and specifies the place of performance as Tracy, California. Interested parties must adhere to the response deadline of November 13, 2026, following the posting date of November 6, 2026.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

Hexagon Head Cap Screw SupplierThis subcontract involves the supply of hexagon head cap screws for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing screws that adhere to ASME B18.2.1 and NSN 5305-00-939-0608 standards. Quality assurance must be conducted via sampling per MIL-STD-1916 or ASQ H1331, and the provider must maintain an SAE AS9003 or ISO 9001 certified quality system. The contract requires the delivery of 20 completed screws to DLA Distribution centers in Albany and New Cumberland. All shipments must be packaged and labeled in strict accordance with ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Machine Screw Supply (NAS1102-06-44)

POSTED

about 5 hours ago

DEADLINE

Electrical Power Cable Assembly Supply

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Motor Vehicle Towing

POSTED

about 5 hours ago

DEADLINE

Manufacture of Threaded Pin-Rivets (NSN 5320010955771)

Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Wire Strand Band (P/N 79/15VZ)This subcontract involves the supply of a high-precision wire strand band, part number 79/15VZ manufactured by Lex Products, LLC, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to military standards, specifically MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract specifies the delivery of one unit on a FOB Origin basis with a required delivery timeframe of five days. Performance is associated with NAICS code 332510 and is centered in Tampa, Florida, under the oversight of the Department of Defense.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Shear Bolts

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Continuous Thread Stud SupplyThis subcontract involves the manufacture or procurement of five critical application continuous thread studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The deliverables must strictly adhere to Technical Drawing TDP Rev A Gen 2 and Basic Drawing NR 53711 6985434 Revision A, ensuring they match NSN 5307-01-652-8969 and Part Piece Number 566-6985434-29. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332611. A critical requirement of this agreement is full compliance with DFARS 252.204-7012 and NIST SP 800-171 cybersecurity standards to ensure the protection of sensitive information.

Spring (Heavy Gauge) Manufacturing

POSTED

about 5 hours ago

DEADLINE

Socket Head Cap Screw SupplyThis subcontract involves the supply of 143 socket head cap screws, specifically NSN 5305-01-481-6471, for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing the components, conducting product verification testing, and delivering comprehensive supply chain traceability documentation. Performance will take place in New Cumberland. To be eligible, the contractor must maintain strict cybersecurity standards, including CMMC Level 2 certification verified by a C3PAO and full adherence to DFARS 252.204-7012. The opportunity was posted on November 6, 2026, with a response deadline of November 13, 2026, falling under NAICS code 333613.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Hexagon Head Cap Screw SupplyThis subcontract involves the supply of 173 specialized hexagon head cap screws to prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The required materials must strictly adhere to Army Drawing Basic Drawing NR 19200 12975549 Revision NR A and the DLA Master List of Technical and Quality Requirements, specifically matching NSN 5305014708107 and Part Number 12975549. The procurement is categorized under NAICS code 336350 and is managed by the Department of Defense. Performance for this contract is designated for Tracy, California. Interested parties must note the response deadline of November 13, 2026.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS