Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-SPEC Wire Rope Manufacturer/Supplier

Active

Federal

Response Deadline10/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of specialized wire rope for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for delivering 30 reels of NSN 4010008521886, ensuring all materials are sourced from QPL or QML providers and manufactured in strict accordance with MIL-DTL-83420R Revision R. Specific technical requirements include coiling the rope to its natural contour, installing protective end caps, and adhering to MIL-STD-2073-1E and MIL-STD-129 packaging standards. Compliance is a critical component of this agreement, requiring the supplier to meet Buy American Act and Berry Amendment regulations. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure cybersecurity standards are met. Performance for this contract will take place at Robins Air Force Base, with a response deadline set for October 19, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-27-T-0030.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ROPE, WIRE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 8

subcontract

Response DeadlineOct 19

Submission deadline

Response Deadline

10/19/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized wire rope for prime contractors on DLA Weapons Support Nuclear Reactor Program projects. Manufactures or sources wire rope per MIL-DTL-83420R Revision R using QPL or QML sources. Coils rope to natural contour, installs protective end caps, and packages per MIL-STD-2073-1E and MIL-STD-129. Requires CMMC Level 2 self-assessment and Buy American Act/Berry Amendment compliance. Delivers 30 reels of NSN 4010008521886.

Similar Contracts

Same NAICS industry code

Impact Attenuator SupplierThis subcontract opportunity is for an Impact Attenuator Supplier to provide crash-worthy impact attenuators for prime contractors working on Nevada Department of Transportation highway projects. The selected supplier will be responsible for manufacturing or procuring units that strictly adhere to MASH or NCHRP 350 crash-test standards, including the provision of all necessary mounting hardware and installation kits. All completed units must be delivered to the District II Equipment Stockroom located in Sparks, Nevada. The solicitation was posted on October 12, 2026, with a response deadline set for November 16, 2026. This procurement falls under NAICS code 332999 and is managed by the Nevada Department of Transportation.

800 - Department of Transportation

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Impact Attenuators

Solicitation # 80DOT-S4043

Solicitation 80DOT-S4043 is a request for quotes for Impact Attenuators issued by the Nevada Department of Transportation. The procurement is managed through the NevadaEPro system, with a response deadline of November 16, 2026, at 10:00 PM PST. All deliverables are to be performed at the District II Equipment Stockroom in Sparks, Nevada. The agency has explicitly stated that quotes must be for the listed items only and that no substitutions will be considered. Potential vendors may submit questions until October 19, 2026, at 12:00 PM PST, with responses expected via amendment around October 26, 2026. Vendors must submit their responses electronically as Sellers within the NevadaEPro portal, completing all required sections including General, Items, Questions, Subcontractors, Notes, and Terms and Conditions. Required system representations include disclosures regarding goods preference and pending litigation, as well as the formal acceptance of bid terms and conditions. Pricing must be detailed by unit cost, discount percentage, and freight. All supporting documentation and technical proposals must be uploaded as attachments, ensuring file names contain no special characters to avoid system errors.

800 - Department of Transportation

POSTED

about 12 hours ago

DEADLINE

in about 1 month

SOLICITATION NUMBER 387862 “LAW MELTER DISCHARGE CHAMBER THERMOCOUPLES AND THERMOWELLS”

Solicitation # SOLICITATION_NUMBE_387862

Hanford Tank Waste Operations & Closure, LLC is seeking proposals for the procurement of LAW Melter Discharge Chamber Thermocouples and Thermowells. This effort is conducted under solicitation number 387862 to support a prime contract with the U.S. Department of Energy, Office of River Protection. The project falls under NAICS code 332999 and will be performed in Richland, Washington. Interested parties must submit their responses by the deadline of October 19, 2026. This opportunity is categorized as a sources-sought notice, and primary coordination is managed by Melinda Diaz.

Hanford Tank Waste Operations & Closure Llc - DOE Contractor

POSTED

about 16 hours ago

DEADLINE

CATCH BASIN TOP 41"X70"X5"COG STANDARD #412

Solicitation # 12542

The City of Greensboro in North Carolina has issued solicitation number 12542 to secure a firm, delivered price for Catch Basin Tops measuring 41 by 70 by 5 inches, COG Standard 412. The solicitation was posted on October 12, 2026, with a response deadline of October 14, 2026, at 6:00 PM. Prospective suppliers are encouraged to submit their bids through the GePS website at least 24 hours before the closing date to avoid potential service interruptions. The contract will generally be awarded to the lowest responsible and responsive bidder. However, the City applies a local preference policy for eligible bidders who maintain a significant business presence in the local area. If the lowest bid is submitted by a non-eligible bidder, any eligible bidder whose bid is within 5 percent of that lowest price will be granted two business days to match the lower price to secure the award.

City of Greensboro

POSTED

about 16 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-27-Q-0081

Solicitation SPE4A6-27-Q-0081 is a Firm Fixed Price request issued by the DLA Weapons Support ASC Commodities Division for the procurement of three sleeve bushings, part number 6071-A103-560 (NSN 3120-01-523-5039). The items are designated as critical application items and must be delivered within 93 days after order to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information and prohibitions on contracting with entities linked to Chinese military lobbyists.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Guardrail Delineator Posts

Solicitation # 43-27

Solicitation 43-27, issued by the New Hampshire Department of Administrative Services, seeks a responsible vendor for a one-time purchase of 6,000 guardrail delineator posts. The requirement consists of 3,000 Bend Back 72-inch U-Channel Delineators and 3,000 Bend Back 84-inch U-Channel Delineators. These posts must be galvanized flanged channel section steel conforming to ASTM A 36 and AASHTO M 111, weighing 1.12 lb per foot, and featuring retroreflective sheeting that meets AASHTO M268 (ASTM D4956) Type IV minimum standards. The award will be granted to the conforming bidder offering the lowest cost, with the state reserving the right to award by individual item. Deliveries are FOB Destination to various NHDOT District locations and Turnpikes, with a maximum allowable lead time of 90 days after receipt of the purchase order. All shipments must be coordinated 48 hours in advance and must include a certificate of compliance, a certified mill test report, a detailed bill of lading, and material safety data sheets as required by the Worker's Right to Know Act. Payment terms are set at 30 days following the receipt of a proper invoice or the final inspection and acceptance of all items. Bids must be submitted via email to the Bureau of Purchase and Property by October 26, 2026, at 9:30 AM Eastern Time.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

Supply of ISO400-F Welded BellowsThis subcontract agreement with the University of Michigan involves the manufacture and supply of one high-specification ISO400-F Welded Bellows intended for use in scientific projects. The contractor is responsible for sourcing or producing the component using specialized alloys or vacuum-grade stainless steel, ensuring the final product undergoes rigorous quality assurance testing for flexibility and vacuum integrity. To ensure technical compliance, the contractor must certify that the bellows meet ANSI, NFPA, IEEE, and IEC standards. The solicitation was posted on October 9, 2026, with a response deadline of November 6, 2026. The project falls under NAICS code 332999 and requires the delivery of one completed unit to the prime contractors.

University of Michigan

POSTED

DEADLINE

TA2 Vacuum Equipment Upgrade - ZEUS

Solicitation # RFQ-0012454-RES-2026

The University of Michigan is soliciting quotations for the TA2 Vacuum Equipment Upgrade - ZEUS, a one-time procurement of specialized vacuum chambers and components for Target Area 2. The required hardware includes ISO400-F Welded Bellows, a Deformable Mirror Vacuum Chamber, a Double Plasma Mirror Chamber, and an Interaction Chamber. Deliveries are staggered, beginning October 1, 2027, and concluding January 10, 2028. Suppliers must provide itemized pricing as single line items based on provided drawings and must certify that all equipment adheres to ANSI, NFPA, IEEE, and IEC industry standards, as well as provide UL certification where applicable. Submissions must be completed by November 6, 2026, and must include a signed RFQ Signature Page to be considered. Offerors are required to disclose any conflicts of interest with the University, provide tax identification, and identify any export-controlled items with their corresponding Export Control Classification Numbers. The University requires Original Equipment Manufacturer service and requests quotes for extended warranties and standard weekday maintenance agreements. Payment is issued via check, ACH, or wire transfer, with Net 0 terms for those in an accepted virtual card program and Net 45 terms otherwise. Timely performance is critical, with liquidated damages ranging from 10% to 30% of the total value for delays between one and three months.

University of Michigan

POSTED

DEADLINE

Bleed Air Tube Fabrication (NSN 1560-00-728-2260)This subcontract with the Department of Defense, specifically the ASC Supplier OE and AF Division, involves the fabrication of 10,000 precision bleed air tubes under NSN 1560-00-728-2260. The manufacturer must produce the tubes according to Basic Drawing NR 98897 4A95013, Rev D, and ensure bare item marking adheres to RQ017. Quality inspections are to be conducted following MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 standards. To qualify for this contract, the provider must hold CMMC Level 2 certification and JCP certification to handle export-controlled data. The solicitation was posted on October 9, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 332999 for specialized precision tube manufacturing.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MFO Medal Set Manufacturing (Certified)This subcontract, managed by C AND T Supply Chain for the Department of Defense, involves the manufacture and supply of 500 complete medal sets under NSN 8455-01-302-2665. The scope of work requires the fabrication of medals and service ribbons using precision metal striking and textile weaving techniques. To ensure quality and authenticity, all production must be certified by The Institute of Heraldry. The contractor is responsible for delivering 500 finished medal sets along with five first article samples for government approval. This opportunity was posted on October 9, 2026, with a response deadline of October 16, 2026, falling under NAICS code 332999.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Precision Manufacturing and Assembly of Jet EjectorThis subcontract involves the precision manufacturing and assembly of Jet Ejectors, specifically NSN 4320-01-517-8545, for prime contractors supporting DLA Land and Maritime supply contracts. The scope of work requires the use of CNC milling and turning centers to perform precision machining of ejector bodies and internal components in strict accordance with part number 925N-2.5IN specifications. The contractor must maintain NIST SP 800-171 cybersecurity compliance and ensure full adherence to the Buy American Act. Managed under the Department of Defense Maritime Supply Chain, the project is categorized under NAICS code 332999 with performance taking place at FPO 96694.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of NSN 5365-01-233-7344 RingsThis subcontract involves the manufacture of 2,000 units of NSN 5365-01-233-7344 rings for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for fabricating the rings to precise dimensions and tolerances as defined by DLA technical specifications, ensuring that no mercury is intentionally added to the components. Quality assurance is a critical component of the agreement, requiring zero-non-conformance sampling conducted in accordance with MIL-STD-1916 or ASQ H1331. The final delivery must include all 2,000 finished rings along with the necessary technical documentation. This opportunity falls under NAICS code 332999 and was posted on October 9, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Same awarding agency

MIL-SPEC Packaging and Freight Services

Freight Transportation Arrangement

POSTED

DEADLINE

Aerospace Power Distribution Panel Fabrication

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Manufacturing and Supply of Electrical Connector Insert ModulesThis subcontract involves the manufacturing and supply of three electrical connector insert modules for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for producing part 16-ALB182F in accordance with Basic Drawing NR 06RP6 16-ALB182 Rev B and RA001 quality requirements. Strict adherence to technical standards is required, including the use of zero-based sampling per MIL-STD-1916 and a guarantee of no mercury content as mandated by NAVSEA 5000-003D. The deliverables consist of three units of NSN 5935016536924, which must be packaged according to MIL-STD-2073-1E. Performance for this contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026, under NAICS code 334417.

Electronic Connector Manufacturing

POSTED

DEADLINE

Supplier of White Electrical Insulation Tape (NSN 5970-00-284-8565)This subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the supply of 19 rolls of white electrical insulation tape (NSN 5970-00-284-8565). The tape must adhere to specific dimensions, featuring a nominal length of 2160 inches, a width of 0.750 inches, and a thickness of 0.0070 inches. Additionally, Type 2 items must be mercury-free and maintain a minimum shelf life of 18 months. The contractor is responsible for ensuring all items are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA RP001 standards. Performance will take place in FPO 09587. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026, falling under NAICS code 326140.

Polystyrene Foam Product Manufacturing

POSTED

DEADLINE

MIL-SPEC Electronic Component PackagingThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing specialized packaging services for LED components. The contractor is responsible for executing packaging according to RP001 and MIL-STD-2073-1E, while ensuring ESD and EMI protection meets MIL-PRF-81705 standards. Additionally, all items must be marked per MIL-STD-129 using Special Marking Code 39 to ensure they are fully prepared for shipment. The project is categorized under NAICS code 561910 and will be performed in Tracy, California. Due to the handling of covered defense information, the contractor must maintain CMMC Level 2 certification. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

Packaging and Labeling Services

POSTED

DEADLINE

Light Emitting Diode (LED) Manufacturer/SupplierThis subcontract involves the manufacture or sourcing of 129 Light Emitting Diodes for the DLA Weapons Support Nuclear Reactor Program. The components must strictly adhere to NSN 5980-01-554-8496 and meet MIL-PRF-81705 standards for EMI and ESD protection. Final delivery of the units is required FOB Origin to DLA Distribution San Joaquin in Tracy, California. To be eligible, the supplier must maintain ITAR and EAR compliance, hold US/Canada Joint Certification Program certification, and meet CMMC Level 2 security requirements. The opportunity is categorized under NAICS code 334413 and is managed by the Department of Defense.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the DLA Weapons Support Nuclear Reactor Program within the Department of Defense. The contractor is responsible for providing specialized military packaging for prime contractors, specifically sealing items in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1. All shipments must be marked according to MIL-STD-129 and MIL-STD-2073-1E standards and must adhere to DLA RP001 palletization requirements to ensure they are ready for DLA Distribution. The work is to be performed at Hill AFB, zip code 84056-5734, under NAICS code 493110. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026.

General Warehousing and Storage

POSTED

DEADLINE

O-Ring Manufacturing and Supply (NSN 5331-00-955-0157)This subcontract involves the manufacturing and supply of 3,016 precision O-rings under NSN 5331-00-955-0157 for the DLA Weapons Support Nuclear Reactor Program. The parts must be produced in strict accordance with NAS1611-012A and Basic Non-Govt Std NAS1611 Rev 12 standards. Additionally, the contractor must ensure that no mercury or mercury-containing compounds are added during production, adhering to NAVSEA 5300-003D regulations. The project requires full compliance with the Buy American Act and DFARS 252.204-7012. Performance for this contract will take place at Hill AFB, zip code 84056-5734. The solicitation was posted on October 8, 2026, with a response deadline of October 19, 2026, falling under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Supply of Specialized Electrical Components for Switch Assembly

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Manufacture of Switch Assembly (NSN 5930-01-667-9136)

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Electronic Shielding Gasket Manufacturer (NSN 5999-01-534-8097)

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supplier of Protective Dust and Moisture Seal CapsThis subcontract involves the supply of six protective dust and moisture seal caps for the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The required items are SOURIAU USA, INC. part number UT014DCG, identified by NSN 5340-01-667-6329, and must strictly adhere to the DLA Master List of Technical and Quality Requirements. All deliverables must comply with MIL-STD-129 packaging and RP001 palletization standards. The place of performance is located in Tracy, California, and the contract falls under NAICS code 423830. The response deadline for this requirement is October 19, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS