Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

MIL-STD-129 and DLA RP001 Compliant Packaging and Marking

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires precise packaging and marking of finished disk assemblies in full compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes for accurate identification and tracking throughout the supply chain. The process includes climate-controlled drying with desiccant to protect components from moisture damage during storage and transit, maintaining product integrity under stringent military specifications. All work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and adherence to these standards is non-negotiable for acceptance. The solicitation, issued under NAICS code 322291, is structured as a subcontract with a response deadline of July 31, 2026, and was posted on July 20, 2026, under the Department of Defense’s Land Supplier Operations Vehicle Support organization.

General Info

Pack disk assemblies per MIL-STD-129 and DLA RP001 with 2D barcodes, climate-controlled, in New Cumberland, PA by July 31, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

322291 - Sanitary Paper Product ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Package and mark finished disk assemblies per MIL-STD-129 and DLA RP001, including 2D Data Matrix barcodes and climate-controlled drying with desiccant.

Similar Contracts

Same NAICS industry code

Specialized Packaging and Crating ServicesPhiladelphia Gas Works has issued a subcontract for specialized packaging, crating, and preservation services tailored to sensitive or large industrial components destined for safe transport to the Richmond Plant. The work requires custom solutions to ensure the integrity of high-value equipment during transit, with adherence to industry standards for protection against environmental factors, physical shock, and corrosion. This contract is open for bids through July 27, 2026, and is classified under NAICS code 322291, which pertains to other paper product manufacturing, suggesting the involvement of engineered packaging materials beyond standard containment. The solicitation does not specify a set-aside status, and while no point of contact or detailed location information is provided, performance is required at the Richmond Plant, with the procuring agency operating out of Pennsylvania. Interested parties must submit proposals prior to the deadline to secure consideration for executing these critical logistics services.

Philadelphia Gas Works

POSTED

DEADLINE

Hazardous Materials Packaging and ComplianceThe contract requires the provision of compliant packaging solutions specifically designed for hazardous medical materials, including silver nitrate and potassium nitrate applicators, ensuring full adherence to federal, military, and international standards for protection against moisture, light, and physical damage during transportation. The packaging must be engineered to maintain the integrity and safety of these sensitive substances throughout the supply chain, accommodating strict regulatory requirements for hazardous material handling and transport. Performance is designated for Groton, Connecticut, with a response deadline of July 27, 2026, and the solicitation is classified as a subcontract under NAICS code 322291, administered by the Department of Defense’s Medical Supply Chain Pharm FSA. All proposals must demonstrate proven capability in meeting the precise environmental and safety benchmarks required for medical hazardous goods, with an emphasis on reliability, regulatory compliance, and logistical durability under operational conditions.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract requires the provision of specialized cold and dry military packaging solutions for sensitive components such as O-rings, ensuring full protection against moisture, grease, and ultraviolet radiation using approved waterproof, greaseproof, and UV-protective materials. The packaging must meet stringent military preservation standards to maintain component integrity during storage and transit under extreme environmental conditions. The work is classified as a subcontract under the NAICS code 322291, issued by the Defense Logistics Agency under the Department of Defense, with the performance scope tied to broader defense logistics operations without a specified geographic restriction. The solicitation was posted in July 2026 and is administered through the DIBBS system under contract number SPE7L126V8602.

Defense Logistics Agency

POSTED

DEADLINE

ESD/EMI-Sensitive Packaging & PreservationThe contract requires the supply of ESD and EMI protective packaging for electronic components, with strict adherence to MIL-STD-2073-1E and MIL-PRF-81705 standards to ensure proper preservation and protection against electrostatic discharge and electromagnetic interference. The packaging must meet all technical and performance requirements outlined in these military specifications to safeguard sensitive electronics during storage, transportation, and handling. This subcontract is targeted for performance at the Columbus location with ZIP code 43213 and is classified under NAICS code 322291, indicating packaging and container manufacturing activities. The solicitation was posted on July 20, 2026, with a response deadline set for July 31, 2026, leaving a limited window for interested parties to submit proposals. The contracting activity falls under the Active Devices Division of the Department of Defense, and the opportunity is open for bidding through the DIBBS platform. No specific set-aside classification is indicated, and while no point of contact details are provided, all submissions must be directed through the official UI link to ensure proper processing and compliance with procurement protocols.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Sustainable Materials and Packaging SupplyThe contract awards the supply of eco-friendly packaging materials specifically designed for aircraft tie-down applications, ensuring compliance with MIL-STD-2073-1E for defense-grade packaging standards and adherence to federal sustainability mandates. The materials must meet rigorous environmental criteria while maintaining the durability, protection, and uniformity required for military logistics operations. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, targets the NAICS code 322291 for other paper product manufacturing, indicating a specialized production focus on sustainable packaging solutions. The award remains active as of July 20, 2026, with performance expected to support defense supply chain logistics across unspecified locations, aligning with broader DoD goals for reducing environmental impact without compromising operational readiness.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Latex-Free Self-Adherent Gauze Bandage RollsThe contract calls for the manufacture and delivery of 2-inch by 10-yard latex-free, non-woven, self-adherent gauze bandage rolls that must comply with DLA medical marking and packaging standards, ensuring full lot traceability and a minimum 36-month shelf life. The product specification emphasizes strict adherence to medical-grade requirements, with no latex content and a non-woven construction that ensures safety and reliability for sensitive users. The bandages must maintain integrity and adhesive performance throughout their shelf life and be labeled and packaged to meet all Department of Defense logistics and identification protocols. The solicitation is issued under the NAICS code 322291 for other textile product mills and is classified as a subcontract with a response deadline of July 27, 2026. The awarding agency is the Medical Supply Chain MD SURG FSF under the Department of Defense, indicating this is part of the military's broader medical procurement infrastructure. Although specific performance location and point of contact details are not provided, all units must be furnished to DLA distribution channels in accordance with federal supply system requirements. Bidders must demonstrate capability to meet traceability, packaging, and shelf-life targets to ensure seamless integration into military medical inventory systems.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of military hardware in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all items are protected against corrosion, contamination, and environmental degradation during storage and transport. Preservation methods must include dry preservation techniques and exclusively use mercury-free materials to comply with environmental and safety regulations. Containerization must meet exacting military specifications for durability, labeling, and stacking, with all components fully documented and traceable through the supply chain. The work is classified as a subcontract under NAICS code 322291 and is being managed by the ASC Commodities Division of the Department of Defense. Performance of this contract is designated to take place at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the proposal response deadline is set for July 23, 2026, at 5:00 PM Eastern Time. The solicitation was posted on July 20, 2026, indicating a tight three-day window for potential vendors to submit their bids. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors, and the primary focus is on adherence to federal military packaging standards rather than socioeconomic preferences. The complete details and submission requirements can be accessed via the provided DIBBS link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Packaging and Hazard LabelingThe contract requires specialized packaging and hazard labeling services in strict alignment with DFARS 252.223-7001 to meet military transport safety and handling standards. All packaging must be DFARS-compliant, ensuring materials are properly secured, protected, and labeled for safe movement within defense logistics chains. Hazard warning labels must be accurately applied according to federal regulations to clearly communicate risks associated with the contents, enabling proper handling by military and civilian personnel throughout the supply chain. The solicitation is classified as a subcontract under NAICS code 322291 and is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY, with performance required at the location in NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. Interested parties must submit responses by the deadline of July 31, 2026, with no set-aside provisions specified. The opportunity is accessible via the DIBBS portal, and compliance with all labeling and packaging standards is mandatory to fulfill contractual obligations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Clinical Analyzer Recording Paper (Hematology)The contract calls for the procurement and delivery of four packages, each containing three units of hematology clinical analyzer recording paper, totaling twelve units. The material must strictly comply with Defense Logistics Agency technical specifications, packaging requirements, and labeling standards to ensure compatibility and operational reliability in military medical environments. The effort is classified as a subcontract under NAICS code 322291, indicating it involves other paper product manufacturing, and is managed by the Medical Supply Chain FSH under the Department of Defense. Performance is designated for FPO with a ZIP code of 09587, signaling delivery to a military postal address, likely supporting overseas or deployed medical facilities. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, indicating a tight turnaround for qualified vendors to submit proposals.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Packaging and Preservation Services (Military Standards)The contract requires the packaging and preservation of dental floss to meet military specifications under MIL-STD-2073-1E, ensuring that the product is sealed in unit and shipping containers designed for rigorous protection during transport and storage. This includes strict adherence to military standards for materials, sealing methods, labeling, and environmental resilience to maintain product integrity in demanding operational conditions. All packaging must be capable of withstanding the stresses of military logistics, including extreme temperatures, humidity, vibration, and prolonged storage periods without degradation. This is a subcontract opportunity issued by the Department of Defense under the Medical Supply Chain FSH, with a North American Industry Classification System code of 322291 for other paper product manufacturing. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with no set-aside provisions specified. Performance is expected to support federal defense logistics, though no specific place of performance is indicated. Interested parties must respond through the DIBBS portal using the provided link to submit proposals in compliance with military packaging requirements.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires specialized packaging and palletizing of adhesive units in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all components are properly preserved, contained, and labeled according to hazardous material regulations. Operations must encompass full lifecycle handling from initial packaging through final palletization, with rigorous adherence to military-grade procedures for protection, durability, and traceability. All work must meet exacting defense logistics requirements for storage, transport, and inspection readiness. Performance is mandated at Fort Irwin, California, with a zip code of 92310-9986, and the work is classified as a subcontract under NAICS code 322291. Respondents must submit proposals by July 27, 2026, following the release date of July 20, 2026. The contract is issued by the Defense Logistics Agency under the Department of Defense, with all documentation and submissions to be processed through the DIBBS platform using solicitation number SPE8ES26T2391. Failure to meet packaging, labeling, or hazardous material compliance standards will result in rejection.

Defense Logistics Agency

POSTED

DEADLINE

ESD/EMI Protective Packaging and PreservationThe contract requires the design and implementation of electrostatic discharge and electromagnetic interference protective packaging using materials qualified under QPL-81705, ensuring compliance with industry-standard safeguards for sensitive electronic components. All packaging must be preserved in accordance with MIL-STD-2073-1E, covering procedures for cleaning, corrosion prevention, wrapping, marking, and storage to maintain item integrity throughout handling and transit. This is a subcontract opportunity under NAICS code 322291, focusing on specialty packaging solutions tailored for defense applications, with performance required at the specified location in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s Fluid Handling Division. Responses must be submitted by the deadline of July 31, 2026, with no set-aside provisions indicated, making it open to all eligible contractors. The emphasis is on proven material qualification and strict adherence to military preservation standards, requiring bidders to demonstrate technical capability in both packaging design and compliance with documented military specifications. While no point of contact is listed, the official solicitation details can be accessed through the DIBBS portal using the provided link for further submission instructions and requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Domestic Freight and Delivery to DLA WarehouseThe contract requires the transportation of 26 units of a control dial component from the origin point to the DLA Distribution facility in Tracy, California, with delivery terms defined as FOB Origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. The delivery must be completed within a strict 75-day ADO timeframe, ensuring timely arrival at the designated warehouse. The solicitation is structured as a subcontract under a Women-Owned Small Business Set-Aside, exclusively available to certified women-owned small businesses, with the NAICS code 484220 indicating it falls under Less-Than-Truckload Freight Transportation. The opportunity was posted on July 20, 2026, with responses required by July 23, 2026, under the purview of the Department of Defense’s Land Supplier Operations Vehicle Support agency, and performance is specifically mandated at the Tracy location with the zip code 95304-5000.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Defense Logistics Packaging and Labeling ServicesThe contract requires the provision of DLA-compliant packaging, hazard labeling, and accompanying documentation for a control dial component, with strict adherence to Department of Defense logistics standards and OSHA hazard communication requirements. All packaging and labeling must meet federal specifications for military supply chain integrity, ensuring safe handling, storage, and transportation of the component throughout its lifecycle. The work must be performed in alignment with current DoD regulations, including proper identification of hazardous materials, use of standardized labels, and submission of complete and accurate documentation to support logistics operations. This subcontract is set aside exclusively for Women-Owned Small Businesses under the WOSB program and is classified under NAICS code 493190, reflecting its focus on warehousing and storage services related to defense logistics. The opportunity was posted on July 20, 2026, with a response deadline of July 23, 2026, and performance is expected to be carried out at Tracy, California, with the ZIP code 95304-5000. The contracting agency is the Department of Defense, specifically under the Land Supplier Operations Vehicle Support office, and the solicitation can be accessed through the DIBBS platform using the provided link.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Control Dial Component SupplyThe contract requires the supply of 26 precision control dial components identified by NSN 5355-01-262-4156, manufactured or sourced to meet rigorous Department of Defense technical and quality specifications. The work encompasses full lifecycle responsibility including production, packaging, labeling, and final delivery in accordance with militarized standards. The procurement is structured as a subcontract under a Women-Owned Small Business Set-Aside, with the NAICS code 334511 indicating classification within the Semiconductor and Other Electronic Component Manufacturing sector. Performance must be executed with final delivery directed to Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 23, 2026, with the opportunity accessible through the DIBBS system under reference SPE7L326T103L, managed by the Land Supplier Operations Vehicle Support organization under the Department of Defense.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Supplier Cybersecurity Compliance and SPRS ManagementThe contract requires suppliers to conduct and submit a NIST SP 800-171 self-assessment with a minimum score of 110 in the Supplier Performance Risk System to demonstrate compliance with Department of Defense cybersecurity standards, ensuring eligibility for subcontracting opportunities. This obligation is mandatory for all parties seeking to engage under the solicitation, and failure to achieve the required score will result in disqualification from consideration. The assessment must be completed in accordance with NIST guidelines and officially recorded in SPRS prior to the deadline. The solicitation is classified as a subcontract under NAICS code 541512, managed by the Department of Defense under the office of Land Supplier Ops Vehicle Spt. The posting date is July 20, 2026, with a strict response deadline of July 23, 2026, leaving a narrow three-day window for submission. All compliance actions must be finalized and validated within this period, and performance is solely tied to the SPRS score without consideration for alternative validation methods. Interested parties must access the official platform via the provided link to initiate the submission process and ensure all documentation is accurately uploaded prior to the deadline.

Computer Systems Design Services

POSTED

DEADLINE

Specialty Packaging, Marking, and Domestic ShipmentThe contract requires specialized packaging, labeling, and domestic freight logistics for a military-spec component, with strict adherence to MIL-STD-129 standards for marking and documentation. All processes must include full compliance with hazardous materials handling protocols, ensuring safe and regulatory-compliant transportation throughout the domestic supply chain. The work involves precise labeling, secure packaging, and coordination with freight carriers to meet military logistics requirements without deviation. This is a subcontract issued under the NAICS code 484220 for truck transportation of freight, with a solicitation response deadline of July 23, 2026, and a posted date of July 20, 2026. The contract is managed by the Department of Defense under the organization title LAND SUPPLIER OPNS VEHICLE SPT, and performance is expected to occur within the United States without geographic restriction specified. Bidders must be prepared to demonstrate capability in military-compliant logistics and hazardous material documentation, as failure to meet these standards will result in non-compliance.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Precision Forging and Stamping of Metal ComponentsThe contract pertains to the precision manufacturing of a forged or stamped steel component designated as 'Clamp, Block, Section' under the National Stock Number 5340-01-680-2899, requiring strict adherence to military or federal specifications to ensure structural integrity and operational reliability. The work must be performed by a qualified subcontractor capable of meeting the technical and quality standards inherent in defense-grade metal fabrication, with production methods limited to forging or stamping processes as specified. The solicitation was posted on July 20, 2026, with a response deadline set for July 23, 2026, indicating a rapid procurement timeline typical of urgent defense supply needs. The North American Industry Classification System code 332510 confirms the focus on forging and stamping operations within the broader metalworking sector. The contracting agency is the Department of Defense, operating through the Land Supplier Operations Vehicle Support branch, with no specific performance location identified, allowing flexibility in production site selection provided all requirements are fulfilled. The subcontract is posted on the DIBBS platform for official sourcing and response submission.

Hardware Manufacturing

POSTED

DEADLINE

Marking, Labeling, and Bar-Coding for Military LogisticsThis contract requires the application of durable markings and barcodes in strict compliance with MIL-STD-129 and additional contract-specific ZZ-ZZ requirements, encompassing the labeling of first article exhibits to ensure full traceability and logistical readiness. All labeling must meet military standards for durability, legibility, and data accuracy to support end-to-end supply chain operations, with particular attention to barcoding formats and placement as dictated by the referenced specifications. The contract is a total small business set-aside under SBA guidelines, exclusively limited to small business concerns as defined by FAR 19.5, and falls under NAICS code 323111 for commercial printing. It is issued by the Department of Defense under the organization name LAND SUPPLIER OPNS VEHICLE SPT, with performance required at the location in Tracy, California, ZIP code 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 30, 2026, with the contract structured as a subcontract under the DLA’s DIBBS system.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Quality Assurance and Inspection at OriginThis contract requires the performance of in-facility quality inspections at the origin site in Tracy, California, adhering to strict Acceptable Quality Level standards: Critical defects must not exceed 0.1%, Major defects must be controlled at or below 1.0%, and Minor defects must remain under 4.0%. Inspections must also comply with designated Verification Levels VII, IV, and II, ensuring comprehensive quality control throughout the production process. The work is being solicited as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the goal of promoting small business participation in federal contracting. The NAICS code 541690 designates this as a professional, scientific, and technical service related to other scientific and technical consulting services, aligning the effort with quality assurance and inspection expertise. The solicitation was posted on July 20, 2026, with responses due by July 30, 2026, and the contract is managed under the Department of Defense through the Land Supplier Operations Vehicle Support organization.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Export-Controlled Technical Data Management and ComplianceThis contract requires comprehensive management and compliance support for export-controlled technical data under ITAR and EAR regulations, with responsibilities including personnel training on export control requirements, maintenance of JCP certification, and submission of DLA questionnaires to ensure authorized access to controlled technical information. The work must be performed by a small business as part of a Total Small Business Set-Aside, with the North American Industry Classification System code 541611 indicating it falls under administrative management and general management services. The performance location is specified as Tracy, California, with a ZIP code of 95304-5000, and the contract was posted on July 20, 2026, with a response deadline of July 30, 2026. The contracting entity is the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization, with the subcontract opportunity accessible through the DIBBS system. All activities must align strictly with federal export control standards to safeguard sensitive technical data and ensure regulatory compliance throughout the contract period.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Specialized Packaging and Preservation ServicesThe contract requires specialized packaging and preservation services in full compliance with SPI AK14114863 Revision B and MIL-STD-2073-1E standards, including the use of ZZ-ZZ preservation methods and approved materials to ensure long-term integrity of sensitive equipment and components. All work must adhere to rigorously defined military specifications for environmental protection, contamination control, and shelf-life preservation, with strict documentation and verification procedures expected throughout the process. The effort is classified as a small business set-aside under the SBA program, meaning only small business concerns are eligible to respond, and the NAICS code 312111 identifies the primary industrial classification as beverage and tobacco product manufacturing, which may indicate the nature of the packaging infrastructure or ancillary processes involved. Performance of the contract is designated for Tracy, California, with a zip code of 95304-5000, and the submission deadline is July 30, 2026, with the solicitation posted on July 20, 2026. This is a subcontract opportunity issued under the Department of Defense through the Land Supplier Operations Vehicle Support organization, and all responders must be prepared to meet the technical, logistical, and compliance demands of government-grade packaging systems. The solicitation is accessible online via the DIBBS platform, and potential vendors are expected to have demonstrated experience in handling military-grade preservation requirements, although no point of contact details are provided in the posting.

Soft Drink Manufacturing

POSTED

DEADLINE

Production Manufacturing of Vehicular BumpersThe contract requires the manufacture of 85 to 150 vehicular bumpers under the NATO Stock Number 2540-01-411-4863, adhering strictly to military specifications. Production must include comprehensive quality assurance protocols, origin inspections to verify compliance with sourcing requirements, and appropriate packaging to ensure safe transport and storage. The work is designated as a total small business set-aside under the Small Business Administration program, meaning only eligible small businesses may bid, and the North American Industry Classification System code 336340 applies, categorizing the effort within the motor vehicle body and trailer manufacturing sector. The performance location is specified as Tracy, California, with a zip code of 95304-5000, and all deliverables must be completed and submitted by the response deadline of July 30, 2026. The solicitation was posted on July 20, 2026, and the contract type is a subcontract under the Department of Defense’s Land Supplier Operations Vehicle Support organization.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE

First Article Testing (FAT) and Qualification of Vehicle BumpersThe contract requires the performance of First Article Testing (FAT) on vehicular bumpers in strict compliance with the specification DI-NDTI-80809B, ensuring all components meet defined quality, performance, and durability standards. Comprehensive test documentation must be generated and submitted as part of the qualification process, including detailed reports that validate conformance to all technical requirements outlined in the referenced standard. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively reserved for small businesses as defined by the SBA, and falls under the NAICS code 336340 for Motor Vehicle Body and Trailer Manufacturing. The contract is issued by the Department of Defense through the Land Supplier Operations Vehicle Support office, with performance required at the designated location in Tracy, California, postal code 95304-5000. Bids must be submitted by the deadline of July 30, 2026, with no solicitation number provided in the available data, and the opportunity is accessible via the DIBBS online platform for potential contractors.

Motor Vehicle Brake System Manufacturing

POSTED

DEADLINE