Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

MIL-STD-129 and J-STD-609 Marking Services

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with MIL-STD-129 for shipment markings and J-STD-609 for lead-free and lead-containing product labels, covering all specified paragraph requirements including the Special Marking Code ZZ and the application of machine-readable barcodes on all packages. This work must be performed to meet exact military standards for identification, traceability, and logistics handling across the defense supply chain. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is classified as a subcontract under NAICS code 323113 for printing and related support activities. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with the awarding agency identified as the Department of Defense through the Maritime Supply Chain office.

General Info

Comply with MIL-STD-129 and J-STD-609 for labeling, barcodes, and shipping at New Cumberland, PA, under DoD subcontract.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

323113 - Commercial Screen PrintingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply MIL-STD-129 shipment markings and J-STD-609 Pb/Pb-free labels per paragraph requirements, including Special Marking Code ZZ and machine-readable barcodes.

Similar Contracts

Same NAICS industry code

Packaging and Labeling of Medical Test KitsThe contract requires secure packaging of medical test kits in sealed containers that meet all applicable medical and federal regulatory standards for safety, integrity, and traceability. Labeling must comply with stringent guidelines to ensure accurate identification, handling, and use of the test kits throughout the supply chain, including proper documentation of contents, lot numbers, expiration dates, and handling instructions. The work is classified as a subcontract under NAICS code 323113, indicating it involves medical equipment and supplies manufacturing, and is being procured by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF organization for performance at an FPO address with ZIP code 96691. Bidders must submit responses by the deadline of August 10, 2026, following all technical and compliance requirements outlined in the solicitation. The packaging and labeling processes must adhere to federal medical standards and ensure the kits remain uncontaminated and fully traceable from final assembly through delivery. There is no set-aside designation, and the contract will be awarded under standard subcontracting procedures. All submissions must be made through the DIBBS platform using the provided link, and failure to meet labeling or packaging specifications will result in disqualification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Item Labeling & MarkingThe contract requires precise application of durable, compliant labels on medical items in accordance with Medical Marking Standard No. 1 to support military logistics operations. Each label must include essential tracking identifiers such as the National Stock Number, Part Number, Contract Line Item Number, Unique Identifier, Quantity per Unit Package, and a machine-readable barcode to ensure full traceability across the defense supply chain. The work must be executed to meet strict military standards for durability and readability under field conditions, ensuring long-term usability in austere environments. The solicitation is issued under NAICS code 323113 and is classified as a subcontract, with responses due by August 10, 2026. Performance is to be carried out at FPO, ZIP 96691, and the contracting activity is managed by the Department of Defense through the Medical Supply Chain Pharm FSA. All subcontractors must meet the technical and compliance requirements defined in MMS NO. 1 without exception, as failure to comply will result in rejection of deliverables and potential contract penalties. The deadline and location indicate a time-sensitive, mission-critical procurement aimed at maintaining operational readiness of medical inventories.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Specialty Packaging and Labeling ServicesThe contract involves the specialized packaging and labeling of cleaning swabs in sealed unit containers, with strict adherence to MMS1A-compliant labeling standards that require the inclusion of the manufacturer date, expiration date, lot number, and contract number on each unit. This work is part of a subcontract under the Medical Supply Chain MD Surg FSF, serving the Department of Defense, ensuring that all products meet stringent military and regulatory requirements for traceability and quality control. The packaging must maintain the integrity of the swabs throughout storage and transit, with each sealed container clearly marked in compliance with the specified labeling protocols. Performance is to be carried out at a designated FPO location with the postal code 09591-0100, and responses are due by August 10, 2026, following a posted solicitation date of August 2, 2026. The NAICS code 323113 indicates the scope falls under printing and related support activities, emphasizing the precision and technical nature of the labeling process. The contract does not specify a set-aside type, and while no point of contact is listed, interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered for award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Packaging, Preservation & Bar-Coding ServicesThe contract requires comprehensive packaging, preservation, and bar-coding services aligned with military standards, specifically MIL-STD-2073-1E and MIL-DTL-117, ensuring all items are sealed in UV-protective, waterproof packaging to withstand harsh environmental conditions. Items must be palletized in accordance with DLA RP001 specifications to guarantee secure, stackable, and transport-ready unit loads. Each package must bear a MIL-STD-129 compliant 2D Data Matrix barcode to enable accurate tracking, inventory management, and logistics visibility throughout the defense supply chain. The work is intended for performance at Tracy, California, with a zip code of 95304-5000, and the solicitation is open for subcontractor bids under a NAICS code of 323113 for printing and related support activities. The response deadline is August 13, 2026, and the posting date is August 2, 2026, with the contracting office identified as Land Supplier Operations Vehicle Support under the Department of Defense.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Medical Device Labeling and Bar-Coding ServicesThe contract requires the application of compliant labeling for medical devices in accordance with Medical Marking Standard No. 1, ensuring all items are marked with Data Matrix codes, unique identifiers, quality unit packages, and traceable barcodes to support accurate inventory management and regulatory compliance. The work involves precision labeling of medical supplies to meet stringent defense and healthcare tracking requirements, with all markings must be durable, scannable, and aligned with federal standards for device identification and traceability across the supply chain. This subcontract, issued under the NAICS code 323113 for medical equipment and supplies manufacturing, is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. Performance is required at Fort Hood, Texas, with a response deadline of August 10, 2026, and the solicitation was posted on August 2, 2026. The contract emphasizes strict adherence to labeling specifications to ensure seamless integration into military medical logistics systems and full traceability of devices from manufacture to point of use.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical-Grade Packaging and LabelingThe contract requires the packaging and labeling of medical syringes in full compliance with MIL-STD-2073-1E and the Medical Marking Standard No. 1, ensuring all components meet stringent military and medical specification requirements. This includes proper hazard labeling to communicate risks associated with the contents and adherence to preservation protocols to maintain sterility and integrity throughout storage and transit. All work must be executed to ensure the syringes remain safe, identifiable, and functional under operational conditions. Performance is mandated to take place at Fort Hood, Texas, with a response deadline of August 10, 2026, and the solicitation was posted on August 2, 2026. The contract is classified as a subcontract under NAICS code 323113, indicating it involves medical equipment and supplies manufacturing. The procuring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, and the work supports critical defense medical logistics operations. While no specific set-aside details are provided, the requirement is clearly tied to defense medical readiness and supply chain continuity.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Item Labeling and MarkingThe contract requires the print and application of labels that comply with Medical Marking Standard No. 1 for medical items, ensuring all required elements such as barcodes, hazard warnings, National Stock Numbers, and handling instructions are accurately included. The work must be performed to exact specifications to maintain regulatory compliance and operational readiness within the Department of Defense medical supply chain. Labels must be printed and affixed correctly to ensure legibility, durability, and traceability throughout the logistics lifecycle. This is a subcontract opportunity issued under NAICS code 323113, with a response deadline of August 10, 2026. The place of performance is designated as JBER, Alaska, with a zip code of 99506-4400. The contract is managed by the Medical Supply Chain Pharm FSA under the Department of Defense and was posted on August 2, 2026. Interested parties must submit their proposals by the stated deadline, and all work must adhere strictly to the technical and compliance requirements outlined in MMS No. 1.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Medical Device Packaging and Labeling ServicesThe contract seeks providers to deliver packaging and labeling services for medical devices under strict compliance with Department of Defense standards, including MIL-STD-129, Medical Marking Standard No. 1, and all applicable hazard communication protocols. The work must ensure that all medical devices are properly marked, labeled, and packaged to meet military logistics and safety requirements, with a focus on readiness, traceability, and regulatory adherence throughout the supply chain. The services are essential to supporting the medical supply chain for surgical and field operations, requiring precision in documentation and adherence to federally mandated specifications. The contract is classified as a subcontract with a NAICS code of 323113, indicating a focus on printing and related support activities. It is tied to a performance location in San Diego, California, with a response deadline of August 10, 2026, and was posted on August 2, 2026. The issuing organization is the Medical Supply Chain MD Surg FSF under the Department of Defense, emphasizing the critical nature of the work for military healthcare logistics. Although specific point of contact details are not provided, all proposals must align with DLA requirements and be submitted through the designated DIBBS portal to be considered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Military-Compliant Packaging & Labeling ServicesThe contract requires provision of packaging and labeling services fully compliant with MIL-STD-2073-1E and the Medical Marking Standard No. 1, ensuring all items meet rigorous military standards for durability, identification, and traceability. It mandates adherence to hazardous materials regulations, including proper bar-coding for inventory control and preservation certification to guarantee product integrity during storage and transport. All work must be performed to exacting specifications to support military medical supply requirements, with a focus on accuracy, compliance, and readiness for deployment. The opportunity is structured as a subcontract under NAICS code 323113 for printing and related support activities, issued by the Department of Defense through the MEDICAL SUPPLY CHAIN PHARM FSA. The place of performance is designated as Waterbury, NY with ZIP code 12189-5000. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. Potential bidders must ensure full alignment with federal and military logistics standards, especially those governing medical equipment packaging, hazardous content handling, and labeling protocols, to qualify for award.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military-Grade Marking and LabelingThis contract mandates the application of 2D Data Matrix barcodes, hazard labels, and physical identification markings in strict accordance with MIL-STD-129 and RQ017 standards for all bare items and their containers. The work requires precise compliance with military-grade labeling regulations to ensure traceability, safety, and proper handling throughout the defense supply chain. All markings must be durable, legible, and properly positioned to meet operational requirements for inventory control and logistics management. The contract, titled Military-Grade Marking and Labeling, is a subcontract issued by the ASC Commodities Division under the Department of Defense, with performance required at NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 323113 indicates the work falls under printing and related support activities. There is no set-aside designation specified, and the contract is open to qualified subcontractors meeting the technical and regulatory requirements outlined in the referenced military standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Marking, and Barcoding ServicesThe contract requires the provision of packaging and marking services fully compliant with MIL-STD-2073-1E standards, ensuring that all items are properly protected and configured for military logistics and storage. This includes the application of MIL-STD-129 labeling with precise barcodes, National Stock Numbers or Line Item Numbers, and the mandatory Special Marking Code 32 for accurate shelf-life tracking and inventory management. All packaging must meet stringent military specifications to support long-term storage, transportation, and readiness requirements across the Department of Defense supply chain. This subcontract is tied to the Land Supply Chain under the Department of Defense, with performance expected at FPO 96662. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The NAICS code 323113 indicates the work involves printing and related support activities, aligning with the technical nature of labeling and barcoding services. While no specific point of contact or set-aside information is provided, compliance with all military packaging and marking standards is mandatory for proposal eligibility and contract award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Shipment Marking and BarcodingThe contract requires adherence to MIL-STD-129 standards for marking and barcoding military shipments to ensure full visibility during transport and storage within the Department of Defense supply chain. All items must be labeled with 2D Data Matrix barcodes that comply with the mandatory specifications for machine readability and data encoding. Where applicable, shipments containing radioactive materials exceeding 0.002 microcuries per gram must also include appropriate radioactive labeling in accordance with federal regulations. The work is structured as a subcontract with a performance location in New Cumberland, Pennsylvania, at zip code 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with the North American Industry Classification System code 323113 indicating the scope aligns with printing and related support activities. The contracting authority is the Department of Defense through the Land Supplier Operations Vehicle Support organization.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

ENCODER, SHAFT ANGLE

Solicitation # SPE7M1-26-T-246P

The contract pertains to the procurement of seven shaft angle encoders identified by NSN 5990-01-672-5924 and part number F181869-20 from LAKE SHORE SYSTEMS, INC. Delivery is required FOB origin within 264 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, specifically at the DLA Distribution facility in New Cumberland, Pennsylvania. All items must be packaged in compliance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence and dictate final compliance standards. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. The unit of issue is each, with a total contract value of $49.00 at $7.00 per unit. The required ship date and original delivery date are both May 6, 2027. The contract is governed under solicitation SPE7M1-26-T-246P, issued under the NAICS code 335312 by the Department of Defense's Maritime Supply Chain. Transportation and freight shipping instructions reference specific DLA procedural notes C19 and C20, and all documentation must align with the DLA’s authorized unit of issue standards. The point of contact for the solicitation is Joseph Madjecki, reachable via phone and email provided.

Motor and Generator Manufacturing

POSTED

about 11 hours ago

DEADLINE

RESISTOR NETWORK, FI

Solicitation # SPE7M1-26-T-246Q

The contract specifies the procurement of a fixed film resistor network with NSN 5905-01-127-7563 and part number M8340101M1801JA, governed by military specification MIL-PRF-83401H(4) and its Supplement 1, both dated May 29, 2024. The item is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be QPL-approved at the time of award. Compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, incorporating referenced technical and quality standards via R and I numbers. The use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and testing processes unless expressly approved in writing by the Contracting Officer, and this restriction overrides any conflicting specification requirements. The resistor must meet electrostatic discharge and electromagnetic interference protection standards per MIL-PRF-81705, requiring certified barrier packaging materials sourced from QPL-81705 approved manufacturers. Additional packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific controls for lead finish identification per IPC/JEDEC J-STD-609, mandating proper labeling on each unit package. ESD and physical protection for leads and terminals is required through cushioning and container design, even when not explicitly outlined in packaging codes. The contract calls for delivery of 10 units FOB origin within 80 days, with inspection and acceptance occurring at destination. No quantity variance is permitted. Packaging must include DOD-approved ESD/EMI materials, and all items must be handled and packaged at approved protective workstations. Final delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-246Q, with a response deadline of August 14, 2026, and an original required delivery date of December 25, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 11 hours ago

DEADLINE

RELAY, ELECTROMAGNET

Solicitation # SPE7M1-26-T-246T

The contract pertains to the procurement of three electromagnetic relays with NSN 5945-01-088-1822 under solicitation SPE7M1-26-T-246T, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency. Delivery is required within 20 days of award, and the solicitation closes on August 14, 2026. The item is subject to stringent export controls under either ITAR or EAR, prohibiting any transfer, including disclosure to foreign persons within or outside the U.S., without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs the handling of this technical data, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on DOD export-controlled data handling, and approved questionnaire submissions are permitted access. The contracting entity must also maintain CMMC Level 2 certification through a certified third-party assessment organization and comply with all DLA packaging and cybersecurity requirements. Point of contact for inquiries is Corin Loper, and the solicitation is available via the DIBBS portal.

Relay and Industrial Control Manufacturing

POSTED

about 11 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7M1-26-Q-1324

The contract pertains to the procurement of an Axle, Shouldered, identified by NSN 3040-00-479-3932 and part number 416540-1, classified as a Critical Application Item for Aircraft Launch and Recovery Equipment (ALRE). It requires strict adherence to serialization and traceability protocols, with each part and its packaging must be marked with the part number, serial number, contractor CAGE code, and actual manufacturer CAGE code, in compliance with MIL-STD-129. Re-branding that obscures original OEM markings is prohibited, and all serialized or lot-numbered components, including scrapped material, must be fully accounted for. Source approval is mandatory and must be granted by the Naval Air Warfare Center Aircraft Division at Lakehurst, with offerors required to submit evidence of approval or meet criteria outlined in the NAVICP Source Approval Information Brochure. Only specifically approved manufacturers are eligible, including AERO COMPONENTS, LLC, RELIABLE MANUFACTURING COMPANY, and others listed. The contract enforces rigorous quality and documentation controls under SAE AS9100 standards, requiring Non-Destructive Testing (NDT) accreditation, Quality Conformance Inspection, and Inspection and Acceptance at Origin. The Certificate of Quality Compliance and other CDRLs such as the First Article Testing Report and Production Test and Inspection Report are mandatory, and technical data must align with the referenced TDP rev A drawings and quality assurance provisions. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance, and all attributes are assigned specific verification levels or AQLs. The item must be free from intentional mercury compounds and Class I ozone-depleting chemicals, with exceptions strictly defined. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements (RP001), and markings must include the contract number, NAWC CAGE code, and part number unless drawings specify otherwise. Delivery is scheduled for 378 days after delivery order, with FOB Origin, and the government has explicitly stated that surplus items are not acceptable. Unique Identification is not required per customer request, though traceability through serialization remains critical.

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-246U

The contract specifies the procurement of a starter motor with part number CR306B004ZABB and NSN 6110012999272, requiring one unit to be delivered within 20 days FOB destination. Strict prohibitions are in place against the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements while maintaining all product performance standards; alternative chemicals require prior approval unless explicitly authorized. Mercury and mercury-containing compounds are banned from direct contact with the hardware except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is designated as a critical application item and must be shipped by the fastest traceable means—parcel post is prohibited—with delivery directed to the USNS COMFORT at FPO AE 09566. The solicitation is issued under contract number SPE7M1-26-T-246U, with a required delivery date of July 29, 2026, and incorporates technical and quality requirements from the DLA Master List, governing revisions based on the acquisition type and timeline. The unit of issue is EA, and the contract is managed by the Department of Defense under the Maritime Supply Chain organization.

Other Measuring and Controlling Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-246K

The contract pertains to the procurement of one gate valve identified by NSN 4820014831523 and part number 1305-016-200 from Milwaukee Valve Co. Inc., with a required delivery within five days of the contract date and FOB destination terms. The item must comply with all DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging, cushioning, containment, and marking standards compliant with MIL-STD-129, with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; portable fluorescent lamps and instruments containing mercury must feature shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The delivery destination is the SRF-JRMC Yokosuka Naval Base in Japan, with a required delivery date of July 31, 2026, and zero variance allowed in quantity. All shipments must adhere to DLA transportation procedures C19 and C20, and the unit of issue is EA as defined by the DoD authorized standard. The solicitation number is SPE7M1-26-T-246K, which incorporates technical and quality requirements from the DLA Master List, and the contract is subject to revision controls based on the acquisition size and amendment dates.

Industrial Valve Manufacturing

POSTED

about 11 hours ago

DEADLINE

PANEL, CONTROL, ELECT

Solicitation # SPE7M1-26-T-246M

The contract pertains to the procurement of a control panel, specifically identified by NSN 6110-01-673-4656 and part number 453-0033 from ACR ELECTRONICS, INC., with a total quantity of 34 units to be delivered within 183 days. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging guidelines under MIL-STD-2073-1E and marking per MIL-STD-129. Packaging must adhere to DLA’s procurement requirements, with specific handling instructions including dry preservation, E5 unit containers, and shockproof containment for any incidental mercury-containing components, as authorized only under narrow exceptions defined by NAVSEA. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and no intentional addition of mercury or its compounds is permitted unless explicitly exempted. Delivery is FOB origin with zero variance in quantity, inspection and acceptance occurring at the destination, with the shipment directed to DLA Distribution Depot Oklahoma at Tinker AFB. The purchase is part of a total small business set-aside under NAICS code 335314, with the original required delivery date of March 7, 2027, and a need ship date of February 14, 2027. Pricing is fixed at $34.00 per unit for a total contract value of $1,156.

Relay and Industrial Control Manufacturing

POSTED

about 11 hours ago

DEADLINE

RESISTOR, CHIP, FIXED

Solicitation # SPE7M1-26-T-246W

The contract specifies the procurement of 2 fixed chip resistors with NSN 5905-01-611-0811 under solicitation SPE7M1-26-T-246W, requiring delivery within 80 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The items must comply with DLA packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including specific packaging methods, materials, and unit packaging codes, with all marking adhering to MIL-STD-129 and the IPC/JEDEC J-STD-609 standard for lead finish identification on each individual unit pack. The contract enforces zero variance in quantity, with inspection and acceptance occurring at the destination, and includes detailed parcel post and shipping instructions. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation issue date for simplified acquisitions. The resistors are supplied by Northrop Grumman Systems Corporation and State of the Art, Inc., under their respective part numbers, and the contract mandates compliance with DLA transport and freight procedures as noted in DLAD Proc Notes C19 and C20. The original delivery deadline is December 27, 2026, with a needed ship date of November 3, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 11 hours ago

DEADLINE

RESISTOR, VARIABLE, W

Solicitation # SPE7M1-26-T-246L

The contract specifies the procurement of a variable wire wound resistor, nonprecision, identified by NSN 5905-00-764-0416 and part number M22/01-00211UB, with a required quantity of six units to be delivered within 16 days after issuance of the purchase request. The item must comply with MIL-PRF-22/1D and MIL-PRF-22E(Sup 1A) technical specifications and is designated as a critical application item, requiring adherence to strict quality and performance standards. The contractor must source components from qualified products or manufacturers lists as defined by applicable procurement notes, and all units must bear lead finish markings per IPC/JEDEC J-STD-609, clearly identifying lead content on each individual unit package. Packaging must conform to MIL-STD-2073-1E and marking must follow MIL-STD-129 with special code ZZ addressing additional requirements. The contract strictly prohibits the use of class I ozone-depleting substances in any phase of manufacturing or processing unless written approval is obtained from the contracting officer, and forbids intentional addition of mercury or mercury-containing compounds to the item or its contact surfaces, with limited exceptions for functional uses in defined applications such as specific batteries, lighting, sensors, or chemical reagents approved by NAVSEA. Portable mercury-containing devices must be shockproof with secondary containment as per NAVSEA 5100-003D. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring upon arrival. The unit price is $6.00 per unit, total value is $36.00, and the contract includes no quantity variance. The solicitation was issued under contract number SPE7M1-26-T-246L, with a response deadline of August 14, 2026, and an original required delivery date of April 12, 2026. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 11 hours ago

DEADLINE

CABLE, POWER, ELECTRICAL

Solicitation # SPE7M1-26-T-246V

This contract is for the procurement of 1,500 feet of electrical power cable identified by NSN 6145014748444, with the specific part number M27500B16WR4U00, manufactured to meet NEMA WC 27500-2025 Revision NR dated 01/01/2025. The cable must be supplied in continuous length as dictated by the advice code, with packaging conforming to ASTM D3951 and labeling per MIL-STD-129, while adhering to all higher-priority requirements listed in the DLA Master List of Technical and Quality Requirements. Packaging must be palletized according to RP001, with a unit of issue of 500 feet per pack, and the total quantity is subject to a plus or minus 5% variance. Delivery is required FOB origin within 210 days, with inspection and acceptance occurring at the destination, and the specified delivery point is DLA Distribution Warner Robins, Robins AFB, Georgia. The cable is sourced from a qualified products list, and full and open competition applies, with no exceptions permitted under the specified technical standard. The solicitation number is SPE7M1-26-T-246V, issued by the Department of Defense under the Maritime Supply Chain organization, with a response deadline of August 14, 2026, and a posted date of August 3, 2026. Performance is mandated at Robins AFB, GA, and the contract includes stringent configuration control through Engineering Change Proposal and variance request protocols. Any deviation from technical or quality specifications must be formally requested and approved. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue must align with the official DoD and ANSI X12 standards provided by the DLA. The point of contact for inquiries is Alisha Blanton, and all documentation referenced, including packaging, shipping, and technical compliance, must be strictly followed to ensure contract fulfillment.

Copper Rolling, Drawing, Extruding, and Alloying

POSTED

about 11 hours ago

DEADLINE

FILTER ELEMENT, FLUI

Solicitation # SPE7M1-26-T-246N

The contract pertains to the procurement of a Filter Element, Flui with NSN 4330-01-544-3410 and part number SO-636CM furnished by Parker Hannifin Corp. A total quantity of 107 units is required at a unit price of $107.00, resulting in a total contract value of $11,449.00. Delivery is to be made FOB origin within 139 days from the original required delivery date of January 1, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item is classified as a critical application with no shelf life requirement. All packaging must comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence, mandating marking and labeling per MIL-STD-129 and palletization in accordance with RP001. The unit of issue is each (EA), and the packaging configuration must align precisely with the contract-specified QUP. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, with the same address used for freight shipping. Transportation instructions are governed by DLAD Proc Notes C19 and C20. This solicitation, identified as SPE7M1-26-T-246N, was issued on August 3, 2026, with a response deadline of August 14, 2026, and is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333998. The contracting office is part of the Department of Defense’s Maritime Supply Chain, and the primary point of contact is Michael Reese, reachable via email and phone provided in the contract. All terms and requirements are governed by DLA standards and referenced master lists accessible through the official DLA procurement portal.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7M1-26-T-246Y

The contract is for the procurement of 50 units of SEAL, PLAIN ENCASED, identified by NSN 5330-01-115-7246, under solicitation number SPE7M1-26-T-246Y, with a response deadline of August 14, 2026, and a delivery requirement of 97 days ADO. The item is classified as a commercial item and must be packaged in a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1 specifications, applicable to direct vendor delivery, foreign military sales, and stock shipments, to protect against UV degradation. The product must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision based on solicitation or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization, and covered defense information protocols are enforced. All items must comply with MIL-STD-130N for identification marking, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS code 339991, issued by the Department of Defense’s Maritime Supply Chain, with performance location in New Cumberland, PA, and primary point of contact Gerald Franklin.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 11 hours ago

DEADLINE