Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Device Packaging and Labeling Services

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks providers to deliver packaging and labeling services for medical devices under strict compliance with Department of Defense standards, including MIL-STD-129, Medical Marking Standard No. 1, and all applicable hazard communication protocols. The work must ensure that all medical devices are properly marked, labeled, and packaged to meet military logistics and safety requirements, with a focus on readiness, traceability, and regulatory adherence throughout the supply chain. The services are essential to supporting the medical supply chain for surgical and field operations, requiring precision in documentation and adherence to federally mandated specifications. The contract is classified as a subcontract with a NAICS code of 323113, indicating a focus on printing and related support activities. It is tied to a performance location in San Diego, California, with a response deadline of August 10, 2026, and was posted on August 2, 2026. The issuing organization is the Medical Supply Chain MD Surg FSF under the Department of Defense, emphasizing the critical nature of the work for military healthcare logistics. Although specific point of contact details are not provided, all proposals must align with DLA requirements and be submitted through the designated DIBBS portal to be considered.

General Info

Provide packaging and labeling for military medical devices per DoD and MIL-STD standards in San Diego by August 10, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

323113 - Commercial Screen PrintingView NAICS

Place of Performance

SAN DIEGO, CA, 92135-7096, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide packaging and labeling services for medical devices in compliance with DLA standards, including MIL-STD-129, Medical Marking Standard No. 1 (MMS No. 1), and hazard communication requirements.

Similar Contracts

Same NAICS industry code

Packaging and Labeling of Medical Test KitsThe contract requires secure packaging of medical test kits in sealed containers that meet all applicable medical and federal regulatory standards for safety, integrity, and traceability. Labeling must comply with stringent guidelines to ensure accurate identification, handling, and use of the test kits throughout the supply chain, including proper documentation of contents, lot numbers, expiration dates, and handling instructions. The work is classified as a subcontract under NAICS code 323113, indicating it involves medical equipment and supplies manufacturing, and is being procured by the Department of Defense through the MEDICAL SUPPLY CHAIN MD SURG FSF organization for performance at an FPO address with ZIP code 96691. Bidders must submit responses by the deadline of August 10, 2026, following all technical and compliance requirements outlined in the solicitation. The packaging and labeling processes must adhere to federal medical standards and ensure the kits remain uncontaminated and fully traceable from final assembly through delivery. There is no set-aside designation, and the contract will be awarded under standard subcontracting procedures. All submissions must be made through the DIBBS platform using the provided link, and failure to meet labeling or packaging specifications will result in disqualification.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Item Labeling & MarkingThe contract requires precise application of durable, compliant labels on medical items in accordance with Medical Marking Standard No. 1 to support military logistics operations. Each label must include essential tracking identifiers such as the National Stock Number, Part Number, Contract Line Item Number, Unique Identifier, Quantity per Unit Package, and a machine-readable barcode to ensure full traceability across the defense supply chain. The work must be executed to meet strict military standards for durability and readability under field conditions, ensuring long-term usability in austere environments. The solicitation is issued under NAICS code 323113 and is classified as a subcontract, with responses due by August 10, 2026. Performance is to be carried out at FPO, ZIP 96691, and the contracting activity is managed by the Department of Defense through the Medical Supply Chain Pharm FSA. All subcontractors must meet the technical and compliance requirements defined in MMS NO. 1 without exception, as failure to comply will result in rejection of deliverables and potential contract penalties. The deadline and location indicate a time-sensitive, mission-critical procurement aimed at maintaining operational readiness of medical inventories.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Specialty Packaging and Labeling ServicesThe contract involves the specialized packaging and labeling of cleaning swabs in sealed unit containers, with strict adherence to MMS1A-compliant labeling standards that require the inclusion of the manufacturer date, expiration date, lot number, and contract number on each unit. This work is part of a subcontract under the Medical Supply Chain MD Surg FSF, serving the Department of Defense, ensuring that all products meet stringent military and regulatory requirements for traceability and quality control. The packaging must maintain the integrity of the swabs throughout storage and transit, with each sealed container clearly marked in compliance with the specified labeling protocols. Performance is to be carried out at a designated FPO location with the postal code 09591-0100, and responses are due by August 10, 2026, following a posted solicitation date of August 2, 2026. The NAICS code 323113 indicates the scope falls under printing and related support activities, emphasizing the precision and technical nature of the labeling process. The contract does not specify a set-aside type, and while no point of contact is listed, interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered for award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Packaging, Preservation & Bar-Coding ServicesThe contract requires comprehensive packaging, preservation, and bar-coding services aligned with military standards, specifically MIL-STD-2073-1E and MIL-DTL-117, ensuring all items are sealed in UV-protective, waterproof packaging to withstand harsh environmental conditions. Items must be palletized in accordance with DLA RP001 specifications to guarantee secure, stackable, and transport-ready unit loads. Each package must bear a MIL-STD-129 compliant 2D Data Matrix barcode to enable accurate tracking, inventory management, and logistics visibility throughout the defense supply chain. The work is intended for performance at Tracy, California, with a zip code of 95304-5000, and the solicitation is open for subcontractor bids under a NAICS code of 323113 for printing and related support activities. The response deadline is August 13, 2026, and the posting date is August 2, 2026, with the contracting office identified as Land Supplier Operations Vehicle Support under the Department of Defense.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Medical Device Labeling and Bar-Coding ServicesThe contract requires the application of compliant labeling for medical devices in accordance with Medical Marking Standard No. 1, ensuring all items are marked with Data Matrix codes, unique identifiers, quality unit packages, and traceable barcodes to support accurate inventory management and regulatory compliance. The work involves precision labeling of medical supplies to meet stringent defense and healthcare tracking requirements, with all markings must be durable, scannable, and aligned with federal standards for device identification and traceability across the supply chain. This subcontract, issued under the NAICS code 323113 for medical equipment and supplies manufacturing, is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF office. Performance is required at Fort Hood, Texas, with a response deadline of August 10, 2026, and the solicitation was posted on August 2, 2026. The contract emphasizes strict adherence to labeling specifications to ensure seamless integration into military medical logistics systems and full traceability of devices from manufacture to point of use.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical-Grade Packaging and LabelingThe contract requires the packaging and labeling of medical syringes in full compliance with MIL-STD-2073-1E and the Medical Marking Standard No. 1, ensuring all components meet stringent military and medical specification requirements. This includes proper hazard labeling to communicate risks associated with the contents and adherence to preservation protocols to maintain sterility and integrity throughout storage and transit. All work must be executed to ensure the syringes remain safe, identifiable, and functional under operational conditions. Performance is mandated to take place at Fort Hood, Texas, with a response deadline of August 10, 2026, and the solicitation was posted on August 2, 2026. The contract is classified as a subcontract under NAICS code 323113, indicating it involves medical equipment and supplies manufacturing. The procuring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, and the work supports critical defense medical logistics operations. While no specific set-aside details are provided, the requirement is clearly tied to defense medical readiness and supply chain continuity.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Item Labeling and MarkingThe contract requires the print and application of labels that comply with Medical Marking Standard No. 1 for medical items, ensuring all required elements such as barcodes, hazard warnings, National Stock Numbers, and handling instructions are accurately included. The work must be performed to exact specifications to maintain regulatory compliance and operational readiness within the Department of Defense medical supply chain. Labels must be printed and affixed correctly to ensure legibility, durability, and traceability throughout the logistics lifecycle. This is a subcontract opportunity issued under NAICS code 323113, with a response deadline of August 10, 2026. The place of performance is designated as JBER, Alaska, with a zip code of 99506-4400. The contract is managed by the Medical Supply Chain Pharm FSA under the Department of Defense and was posted on August 2, 2026. Interested parties must submit their proposals by the stated deadline, and all work must adhere strictly to the technical and compliance requirements outlined in MMS No. 1.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military-Compliant Packaging & Labeling ServicesThe contract requires provision of packaging and labeling services fully compliant with MIL-STD-2073-1E and the Medical Marking Standard No. 1, ensuring all items meet rigorous military standards for durability, identification, and traceability. It mandates adherence to hazardous materials regulations, including proper bar-coding for inventory control and preservation certification to guarantee product integrity during storage and transport. All work must be performed to exacting specifications to support military medical supply requirements, with a focus on accuracy, compliance, and readiness for deployment. The opportunity is structured as a subcontract under NAICS code 323113 for printing and related support activities, issued by the Department of Defense through the MEDICAL SUPPLY CHAIN PHARM FSA. The place of performance is designated as Waterbury, NY with ZIP code 12189-5000. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. Potential bidders must ensure full alignment with federal and military logistics standards, especially those governing medical equipment packaging, hazardous content handling, and labeling protocols, to qualify for award.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military-Grade Marking and LabelingThis contract mandates the application of 2D Data Matrix barcodes, hazard labels, and physical identification markings in strict accordance with MIL-STD-129 and RQ017 standards for all bare items and their containers. The work requires precise compliance with military-grade labeling regulations to ensure traceability, safety, and proper handling throughout the defense supply chain. All markings must be durable, legible, and properly positioned to meet operational requirements for inventory control and logistics management. The contract, titled Military-Grade Marking and Labeling, is a subcontract issued by the ASC Commodities Division under the Department of Defense, with performance required at NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 323113 indicates the work falls under printing and related support activities. There is no set-aside designation specified, and the contract is open to qualified subcontractors meeting the technical and regulatory requirements outlined in the referenced military standards.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Marking, and Barcoding ServicesThe contract requires the provision of packaging and marking services fully compliant with MIL-STD-2073-1E standards, ensuring that all items are properly protected and configured for military logistics and storage. This includes the application of MIL-STD-129 labeling with precise barcodes, National Stock Numbers or Line Item Numbers, and the mandatory Special Marking Code 32 for accurate shelf-life tracking and inventory management. All packaging must meet stringent military specifications to support long-term storage, transportation, and readiness requirements across the Department of Defense supply chain. This subcontract is tied to the Land Supply Chain under the Department of Defense, with performance expected at FPO 96662. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The NAICS code 323113 indicates the work involves printing and related support activities, aligning with the technical nature of labeling and barcoding services. While no specific point of contact or set-aside information is provided, compliance with all military packaging and marking standards is mandatory for proposal eligibility and contract award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Shipment Marking and BarcodingThe contract requires adherence to MIL-STD-129 standards for marking and barcoding military shipments to ensure full visibility during transport and storage within the Department of Defense supply chain. All items must be labeled with 2D Data Matrix barcodes that comply with the mandatory specifications for machine readability and data encoding. Where applicable, shipments containing radioactive materials exceeding 0.002 microcuries per gram must also include appropriate radioactive labeling in accordance with federal regulations. The work is structured as a subcontract with a performance location in New Cumberland, Pennsylvania, at zip code 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026, with the North American Industry Classification System code 323113 indicating the scope aligns with printing and related support activities. The contracting authority is the Department of Defense through the Land Supplier Operations Vehicle Support organization.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Government-Compliant Packaging and Unit SealingThe contract requires performance of unit-level packaging and sealing of pharmaceutical products in strict compliance with Defense Logistics Agency standards to ensure product integrity, prevent damage during transit, and maintain tamper-evident security throughout the supply chain. The work must be executed to meet rigorous federal requirements for pharmaceutical handling, emphasizing consistency, traceability, and compliance with applicable regulatory protocols. The solicitation is classified as a subcontract under NAICS code 323113 and is managed by the Medical Supply Chain Pharm FSA under the Department of Defense. Performance is to occur at Fort Lewis, Washington, with a zip code of 98433-9500. The opportunity was posted on August 2, 2026, and responses are due by August 10, 2026. All activities must align with DLA-specific packaging specifications, and bidders must be prepared to demonstrate capability in secure, high-volume pharmaceutical packaging operations.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

TEST STRIPS, SANITIZING

Solicitation # SPE2DS-26-T-301P

Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.

Family Planning Centers

POSTED

about 11 hours ago

DEADLINE

BANDAGE, ADHESIVE

Solicitation # SPE2DS-26-T-302E

The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

INTRODUCER KIT, CATH

Solicitation # SPE2DS-26-T-301U

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

SPHYGMOMANOMETER

Solicitation # SPE2DS-26-T-300Q

An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-301F

The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

CHIP, HYDROGEN PEROX

Solicitation # SPE2DS-26-T-300S

The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.

In-Vitro Diagnostic Substance Manufacturing

POSTED

about 11 hours ago

DEADLINE

CHIP, CARBON DIOXIDE

Solicitation # SPE2DS-26-T-301A

The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.

Family Planning Centers

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-300U

The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

about 11 hours ago

DEADLINE

NEEDLE SET, INTRAOSS

Solicitation # SPE2DS-26-T-301Q

The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

GLOVES, CHEMICAL AND

Solicitation # SPE2DS-26-T-300Z

The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 11 hours ago

DEADLINE

TUBING, ANESTHESIA

Solicitation # SPE2DS-26-T-301G

The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE

AIRWAY, SUPRAGLOTTIC

Solicitation # SPE2DS-26-T-302G

The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.

Surgical and Medical Instrument Manufacturing

POSTED

about 11 hours ago

DEADLINE