Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

CHIP, CARBON DIOXIDE

Active
SPE2DS-26-T-301AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The CHIP, CARBON DIOXIDE item is a diagnostic unit containing ten measurement capillaries pre-filled with a carbon dioxide reagent, designed specifically for use with the CMS gas analyzer. It has a detection range of 200 to 3000 ppm and is intended for medical use in gas analysis applications. This item is classified as a TYPE I (CODE M) shelf-life item with a strict 24-month non-extendable shelf life, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed in a protective container, with shipping containers ensuring safe, low-cost delivery to the specified point of performance at Offutt AFB, Nebraska. All labels must clearly show the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C standards. The procurement is governed by DLA Master List technical and quality requirements, with applicable provisions including packaging standards, removal of government identification from non-accepted supplies, and handling of covered defense information. The contract is issued under solicitation SPE2DS-26-T-301A, with a single unit requested and a delivery requirement of five days after award. The item falls under NAICS Code 621410, and the contract is managed by the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue listed as the primary point of contact. All documentation, labeling, and compliance must adhere strictly to current DLA directives, and the solicitation response deadline is set for August 10, 2026.

General Info

CHIP CO2 diagnostic unit, 24-month shelf life, medical use, must reach Offutt AFB within 5 days of award.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

621410 - Family Planning CentersView NAICS

Place of Performance

2501 CAPEHART RD STE 1105, OFFUTT AFB, NE, 68113-1044, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-301A.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Mary-Kathryn Donahue
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CHIP,CARBON DIOXIDE
CHIP, CARBON DIOXIDE
FEATURES CHIP CONTAINS TEN MEASUREMENT CAPILLARIES FILLED WITH A CARBON
DIOXIDE REAGENT DETECTION SYSTEM; THE MEASURING RANGE IS 200 TO 3000
PPM; FOR CMS GAS ANALYZER
.
UNIT OF ISSUE EACH, EA
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS016: Shelf-life requirement RS001 for a TYPE I (CODE M) item with a
SPE2DS-26-T-301A
SECTION B
shelf life of 24 months (non-extendable) applies to this item.
SHALL HAVE A SHELF LIFE OF 24 MONTHS. NOT MORE THAN 3 MONTHS SHALL HAVE ELAPSED FROM DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE GOVERNMENT. . SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE CONTRACT NUMBER/LOT NUMBER. .. ADEQUATE DATA FOR THE NSN/Part Number: 6550-01-530-5903 Quantity: 1 EA Purchase Request: 7017702435QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-301P
Test strips for sanitizing testing are designed to measure the concentration of quaternary ammonium compound (QAC) sanitizers used in dishwashing rinse cycles, with a detection range of 50 to 400 ppm. These impregnated paper strips provide a quick and reliable method to verify sanitizer strength, ensuring proper disinfection standards are met in institutional and commercial food service environments. The product is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a purchase request number of 7017702433 and a quantity of two units. The solicitation, numbered SPE2DS-26-T-301P, was posted on August 3, 2026, with responses due by August 10, 2026. Delivery is required within five days of award, and the place of performance is designated as APO with ZIP code 96278-2060. The primary point of contact for inquiries is Anh Lam, reachable via email at anh.lam@dla.mil or phone at 215-737-7477.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
TUBE, SORBENT
Solicitation # SPE2DS-26-T-301T
The item is a sorbent tube designated as TUBE, SORBENT with specific construction details: it features XAD-2 sorbent material in two sections totaling 140 mg and 270 mg respectively, housed in a glass tube measuring 75 mm in length with an outer diameter of 13 to 8 mm. The tube includes a glass fiber filter, foam, and Teflon ring separators (FFGT), glass open ends, and a protective cover. Each package contains ten units and is issued as a PG. The item is subject to strict shelf-life requirements as a TYPE I (CODE H) item, mandating a non-extendable 12-month shelf life with no more than one month elapsed from manufacture to government delivery. Labeling must comply with MMS1C, clearly showing the date of manufacture, expiration or retest date, and contract or lot number. Packaging must meet commercial standards as specified in Medical Marking Standard No. 1, replacing MIL-STD-129, and all units must be sealed in suitable containers to prevent damage, with exterior shipping containers ensuring safe, cost-effective delivery to Moody AFB, Georgia. The item is governed by technical and quality requirements from the DLA Master List, and covered defense information may apply. The solicitation number is SPE2DS-26-T-301T, issued on August 3, 2026, with proposals due by August 10, 2026, under a federal procurement through the Department of Defense, Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
DIP QUICK STAIN KIT BU
Solicitation # SPE2DS-26-T-301Z
The DIP QUICK STAIN KIT BULK REFILL is a medical supply item regulated by the FDA, intended for use with the DIP QUICK STAIN KIT, containing three 500 mL bottles per unit. It is identified by NSN 6550-01-484-2014 and must be supplied with the exact part numbers listed for approved vendors: Patterson Veterinary Supply, Inc. (P/N 07-802-4158), Covetrus North America, LLC (P/N 073863), and Jorgensen Laboratories, Inc. (P/N J0322A). Bidders must specify the source and part number being offered, and all packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129. Each unit must be sealed in suitable commercial containers to prevent damage, and shipping containers must ensure safe, low-cost delivery to the destination point of APO 09227-0000. The contract requires delivery within 84 days under FOB destination terms with no tolerance for quantity variance. Inspection and acceptance occur at destination, and all materials must meet DLA packaging requirements and technical quality standards referenced in the DLA Master List. The solicitation is issued under SPE2DS-26-T-301Z with a response deadline of August 10, 2026, and is governed by federal procurement rules applicable to medical acquisitions.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CULTURE MEDIUM, MOTI
Solicitation # SPE2DS-26-T-297C
The contract specifies the procurement of Culture Medium, Motility Determination, identified by NSN 6550-01-732-8840, in packages of 20 tubes each totaling 5 mL per tube, with a total order quantity of two packages. The product is a motility test medium containing TTC indicator, housed in 15mm x 103mm tubes, and must be stored refrigerated between 2°C and 8°C (36°F to 46°F) with strict prohibition against freezing. The item has a non-extendable shelf life of 12 months, and no more than one month may have elapsed from the date of manufacture to the date of delivery to the government. All labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, with markings strictly compliant with Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129. Packaging must be commercial, with each unit sealed in a protective container and packed in suitable commercial shipping containers to ensure safe delivery at the lowest rate to the destination point of delivery in Williamsburg, VA. Parcel post is prohibited, and all shipments must use traceable freight methods, with ocean transport required to be via U.S.-flag vessels unless a waiver is obtained with prior notification to MARAD and the Contracting Officer. The item is subject to DLA Packaging Requirements (RP001) and must adhere to the latest revision of MMS1C for shelf-life markings, and the packaging structure must follow MIL-STD-2073-1E guidelines. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced under RA001. Inspections and acceptance occur at the destination, with the government responsible for verifying compliance with all requirements under FAR 52.246-2. Contractors must comply with a broad array of federal and defense regulations including safeguards for covered defense information under DFARS 252.204-7012, employment eligibility verification, combating human trafficking, hazardous material identification under 252.223-3, prohibitions on hexavalent chromium, and restrictions on covered defense telecommunications equipment. Proposals must be submitted electronically via the DIBBS portal by August 10, 2026, and must include the source and part number being supplied. The contract
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
ASCORBIC ACID
Solicitation # SPE2DS-26-T-295K
Ascorbic acid is supplied as a reagent for specific analytical methods including aluminum determination by the Aluminon method, manganese determination by the PAN method, and total chelant determination by titration, and is designated for use with end item 6630-01-571-7779. The item is classified as a Type I (Code S) medical product with a non-extendable shelf life of 60 months and must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging and containment must meet commercial standards ensuring protection from damage during transit, with each unit sealed and packed in suitable exterior shipping containers for safe, cost-effective delivery to the destination. The supplier must provide the manufacturer’s part number, which is HACH COMPANY P/N 1457799, and specify the source of supply. The item is regulated by the FDA and requires a referral through EBS for confirmation prior to award. Delivery is FOB destination within 20 days, with no variance permitted in quantity, and inspection and acceptance occur at the delivery point. The NSN is 6550-01-607-1753, with a unit of issue of 1 PG equaling 100 units. The contract requires adherence to DLA packaging requirements and transportation protocols, with shipment directed to Camp Kinser, JP, and marked according to specified government codes and identifiers. The solicitation is issued under SPE2DS-26-T-295K with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, SALMONELLA ID
Solicitation # SPE2DS-26-T-296W
This contract is for a single unit of a Salmonella identification test kit designed as a rapid latex-based diagnostic tool that uses distinctive color reactions to identify Salmonella groups. The kit includes Latex Reagents 1 and 2, along with red, blue, and green positive controls, and all necessary disposable components such as mixing sticks, reaction cards, sample dispensers, and suspension tubes to ensure contamination-free and efficient testing. The item is identified by NSN 6550-01-360-5759 and is part of a sole-source purchase under request 7017691432 with a delivery timeline of five days after award. The solicitation was issued under contract SPE2DS-26-T-296W, posted on August 2, 2026, with responses due by August 10, 2026, and is classified under NAICS code 621410 for medical laboratories. The procuring agency is the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance based in Williamsburg, Virginia, 23185-5830. Primary point of contact for inquiries is Tiffany Parker, reachable via phone or email provided, and all solicitation details are accessible through the DIBBS platform.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
GLOBULIN SERUM, ANTI-HU
Solicitation # SPE2DS-26-T-299T
Globulin Serum, Anti-Human, a medical reagent used for detecting human IgG bound to red blood cells, is being procured under solicitation SPE2DS-26-T-299T with a unit of issue of one 10 mL vial (VI). The product requires refrigerated storage between 2 to 8 degrees Celsius and must have a non-extendable shelf life of 12 months, with no more than one month having elapsed from the date of manufacture to the date of delivery to the government. All labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with the latest revision of MMS1C, and must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must be commercial and conform to MIL-STD-2073-1E, ensuring each vial is sealed in a protective container and packed in suitable exterior shipping containers capable of safe delivery at the lowest transportation rate to Joint Base Charleston, SC 29404, under FOB Destination terms. Delivery is required within 20 days of solicitation issuance. The contract incorporates a comprehensive set of Federal Acquisition Regulation (FAR) and Defense FAR Supplement (DFARS) clauses covering cybersecurity, safeguarding covered defense information, whistleblower rights, prohibitions on hazardous materials and hexavalent chromium, trafficking in persons, employment eligibility verification, sustainable products, and restrictions on arbitration agreements. Contractors must comply with DLA’s Master List of Technical and Quality Requirements, and must submit Safety Data Sheets prior to award in accordance with hazard communication standards. All submissions must be made electronically via the DIBBS portal, and payment must be processed through WAWF. The contract includes alternate clauses for authorization and consent, and deviations are noted for certain clauses including unenforceability of unauthorized obligations, accelerated payments to small business subcontractors, and cybersecurity safeguards. While the solicitation does not specify a contract type, evaluation factors, or pricing details, it requires offerors to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose any covered defense telecommunications equipment or services. Inspection and acceptance will occur at the destination, and all technical and packaging requirements are mandatory for successful delivery and award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
CONTROL SET, BLOOD C
Solicitation # SPE2DS-26-T-296G
This contract specifies the procurement of a liquid general chemistry and lipid control combo kit, designated as CONTROL SET, BLOOD C, for use with PICCOLO EXPRESS analyzers in high and low levels. Each package contains twelve total vials—six high and six low—with each vial holding 1 mL of control material. The product must be shipped and received frozen at -18°C (0°F) to maintain integrity and functionality. The unit of issue is PG, with each package containing the full complement of vials. The item has a non-extendable shelf life of 12 months, and no more than one month may have passed from the date of manufacture to the date of delivery to the government. Labels must clearly indicate the date of manufacture, expiration date, contract number, and lot number in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must comply with commercial standards, ensuring the contents are sealed and protected from damage during transit, with exterior shipping containers suitable for safe, cost-effective delivery via common carriers to the designated point of delivery. All supplies must be marked as specified under MMS No. 1, and government identification must be removed from non-accepted supplies. The item is classified as a TYPE I (CODE H) with strict shelf-life controls, and technical and quality requirements referenced under R and I numbers are governed by the DLA Master List. The procurement is managed under solicitation SPE2DS-26-T-296G, with a delivery deadline of five days after order placement, and the contracting office is the Department of Defense’s Medical Supply Chain under the Federal agency structure.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
BLOOD DILUTING SOLUTIO
Solicitation # SPE2DS-26-T-296D
The contract specifies the procurement of a 20-liter bottle of Blood Diluting Solution, isonic, azide-free, intended for counting red and white blood cells, identified by NSN 6550-01-034-5640. The item must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to DLA packaging standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129. Each unit must be sealed in a protective container, and shipping containers must ensure safe delivery at the lowest cost to the designated delivery point, with all markings including the date of manufacture, expiration date, contract number, and lot number following the latest revision of MMS1C. The solution has a non-extendable shelf life of 12 months, and no more than one month may have elapsed between the date of manufacture and the date of delivery to the government. The solicitation, issued under SPE2DS-26-T-296D, was posted on August 2, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after award. The product is categorized as a TYPE I (CODE H) item under shelf-life requirements and falls under NAICS code 621410, procured by the Department of Defense’s Medical Supply Chain for use in federal medical operations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 621410
New
DIBBS
TEST STRIPS, SANITIZING
Solicitation # SPE2DS-26-T-292X
Test strips designed for sanitizing testing are impregnated paper strips that detect the concentration of quaternary ammonium compound sanitizers in dishwashing rinse solutions, with a measurement range of 50 to 400 ppm. These strips are used to verify the effectiveness of sanitizing agents to ensure proper hygiene standards in food service and medical environments. The item is identified by NSN 6550-01-452-1775 and is being procured under a federal solicitation issued by the Department of Defense through the Medical Supply Chain MD Surg FSF. The solicitation number is SPE2DS-26-T-292X, posted on July 30, 2026, with a response deadline of August 5, 2026. The contract calls for a single unit delivery within 20 days after order placement, with performance to be completed at Tinker Air Force Base, Oklahoma, 73145. Primary point of contact for inquiries is Anh Lam, reachable via phone at 215-737-7477 or email at anh.lam@dla.mil.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
GLOBULIN SERUM, ANTI-HU
Solicitation # SPE2DS-26-T-292E
Globulin Serum, Anti-Human is a specialized reagent used for detecting human IgG antibodies bound to red blood cells, supplied in 10 mL vials with a unit of issue of VI. The product requires refrigeration between 2 to 8 degrees Celsius and has a strict 12-month shelf life that is non-extendable, with no more than one month allowed to have passed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1, replacing MIL-STD-129, and must include the date of manufacture, expiration or retest date, contract number, and lot number in accordance with MMS1C guidelines. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe transport via common carrier at the lowest cost to the designated delivery point, which is APO with ZIP 09898. The item is classified as a Type I (Code H) medical supply under RS011, and all packaging must adhere to DLA packaging standards. The contract requires full compliance with technical and quality requirements referenced in the DLA Master List, and covered defense information may apply. The solicitation number is SPE2DS-26-T-292E, with a response deadline of August 5, 2026, and the contract is for six units to be delivered within 20 days after contract award.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 621410
New
DIBBS
TEST KIT, INFLUENZA +B
Solicitation # SPE2DS-26-T-293H
This contract is for the procurement of a rapid diagnostic test kit designed for the qualitative detection of influenza A and B antigens directly from nasal swab, nasal wash, or nasal aspirate specimens. The kit is intended as an aid in the rapid differential diagnosis of acute influenza infections and contains 25 tests per kit, with results available within 10 minutes. Each kit must be stored at room temperature between 59°F and 86°F and has a non-extendable shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of delivery to the government. All packaging must comply with commercial standards and conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be sealed and protected to prevent damage during transit. Labels must clearly indicate the date of manufacture, expiration date, and contract or lot number in accordance with the latest version of MMS1C. The contract requires compliance with federal hazardous communication standards, mandating the submission of Safety Data Sheets aligned with OSHA’s 29 C.F.R. 1910.1200 and corresponding labels compliant with the Globally Harmonized System, effective June 1, 2015. Supplier employees must also be trained on these updated requirements. The item is identified under NSN 6550-01-531-2897 with a single unit of issue, and delivery is due within five days of award. The solicitation number is SPE2DS-26-T-293H, issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, and all technical and quality requirements referenced under R or I numbers must be met as outlined in the DLA Master List. The contract incorporates applicable defense acquisition rules, including packaging, labeling, and government identification removal requirements, and is subject to Federal Standard No. 313-E for hazardous materials documentation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

4 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339113
New
DIBBS
BANDAGE, ADHESIVE
Solicitation # SPE2DS-26-T-302E
The contract specifies the supply of adhesive bandages measuring 0.750 inches by 3 inches, packaged in quantities of 30 per unit, with a total order of three packages. The bandages are sterile, feature a flesh/clear color, and are affixed to a plastic adhesive backing. Each package must be sealed in a suitable unit container that protects the contents from damage, and all units must be packed in commercial shipping containers compliant with low-rate carrier standards for safe delivery to the designated point. The product must have a minimum shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling requirements mandate inclusion of the date of manufacture, expiration or retest date, contract number, and lot number, all formatted in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129. Compliance with DLA packaging and medical marking standards is mandatory, and all supplies must be marked as specified. The bandages are identified by NSN 6510-01-519-5781 and fall under the NAICS code 339113, with a required delivery within 20 days of award. The solicitation is issued under SPE2DS-26-T-302E by the Department of Defense’s Medical Supply Chain, and bidders must clearly state the source and part number being offered. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to defense information controls.
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
INTRODUCER KIT, CATH
Solicitation # SPE2DS-26-T-301U
The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, including a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and two inches of 2-0 nylon suture with reverse cutting. The kit is identified by NSN 6515-01-663-2913 with a quantity of 14 kits required for delivery within 84 days of award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on either the solicitation issue date or award date depending on the scale of the acquisition. Packaging must adhere to DLA specifications and all non-accepted supplies must be cleared of government identification prior to shipment. Bidders are required to clearly state the source and part number being offered. The solicitation, numbered SPE2DS-26-T-301U, was posted on August 3, 2026, with responses due by August 10, 2026, under NAICS code 339113 for medical device manufacturing, and is managed by the Department of Defense’s Medical Supply Chain under the agency name Medical Supply Chain MD Surg FSF, with performance addressed to APO 09227-0000.
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
SPHYGMOMANOMETER
Solicitation # SPE2DS-26-T-300Q
An aneroid sphygmomanometer designed for pediatric use, this device features a two-tube cuff with a blue nylon material and hook-and-loop closure, calibrated for accurate blood pressure measurements up to 300 mmHg. It includes an inflation bulb with tubing and a check valve, a no-pin-stop manometer with integrated tubing, and a carrying case for portability. The cuff is clearly marked with artery labels and index range markings to facilitate proper placement and readings. The manometer is backed by a ten-year calibration warranty, ensuring long-term accuracy and reliability. The unit is supplied as a complete assembly, with each item considered a single unit of issue. This contract requires the delivery of eight units under NSN 6515-01-311-0419, with a purchase request number 7017723157 and a delivery requirement of 84 days after order award. The solicitation number is SPE2DS-26-T-300Q, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with performance taking place in APO 96260-5479. Bidders must provide the source and part number for the supplied item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The government mandates removal of its identification from any non-accepted supplies. The solicitation closed on August 10, 2026, after being posted on August 3, 2026, under NAICS code 339112 for medical device manufacturing.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPLINT, ANKLE
Solicitation # SPE2DS-26-T-301F
The contract specifies the procurement of a reusable, black, lace-closure ankle splint made of nylon, designed to stabilize ankle injuries and capable of being washed. The item is regulated by the FDA and must be supplied with specific manufacturer part numbers including Medical Specialties Inc P/N 223615 and Henry Schein P/N 2430003; bidders are required to clearly state the country of origin and part number being offered. All packaging must comply with commercial standards as outlined in the procurement document, with each unit sealed in a protective container and shipped in exterior containers that ensure safe delivery at the lowest rate to the designated destination. Marking must adhere to Medical Marking Standard No. 1, superseding all prior referencing standards, and copies of this standard are available through DLA Troop Support. The National Stock Number is 6515-01-529-9830, with a quantity of 3 units required at a unit price of $3.00, totaling $9.00. Delivery is due within 84 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The solicitation falls under DLA’s medical acquisition procedures and incorporates all applicable technical and quality requirements referenced in the DLA Master List, with packaging required to meet MIL-STD-2073-1E. The contract is issued under solicitation SPE2DS-26-T-301F, with responses due by August 10, 2026, and the place of performance is APO, ZIP 96260-5479.
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325413
New
DIBBS
CHIP, HYDROGEN PEROX
Solicitation # SPE2DS-26-T-300S
The contract specifies the procurement of a single unit of a hydrogen peroxide test chip designed for use with a CMS analyzer, featuring ten measurement capillaries pre-filled with substance-specific reagent for detecting hydrogen peroxide concentrations within a range of 0.20 to 2.0 PPM, enabling ten individual tests. The item is identified by NSN 6550-01-530-8328 and is governed by solicitation SPE2DS-26-T-300S, issued by the Department of Defense’s Medical Supply Chain under the NAICS code 325413. The delivery is required within 84 days of award, with performance taking place at APO 96260-5479. The product must comply with stringent packaging and labeling requirements under Medical Marking Standard No. 1, superseding MIL-STD-129, with all units sealed in commercial-grade containers to prevent damage during transit and shipped in exterior containers suitable for carrier acceptance at the lowest cost. A critical shelf-life condition mandates that the item must have no more than one month elapsed since manufacture at the time of delivery, with a total non-extendable shelf life of 12 months from production. Labels must clearly display the date of manufacture, expiration or retest date, and the contract or lot number in accordance with MMS1C guidelines. The procurement is subject to DLA packaging and quality requirements, and the contractor must provide source and part number details, with all technical specifications incorporated from the DLA Master List of Technical and Quality Requirements.
In-Vitro Diagnostic Substance Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
AIRWAY, ORAL
Solicitation # SPE2DS-26-T-300U
The contract is for the procurement of a large, sterile, disposable oral airway device, specifically the Berman type at 100 mm length, with a unit of issue of 10 pieces per package. The item is identified by the NSN 6515-01-367-5272 and is being solicited under SPE2DS-26-T-300U with a response deadline of August 10, 2026. Deliveries must be completed within 20 days after award. Bidders are required to clearly state the manufacturer source and part number being offered. Technical and quality requirements referenced under RA001, RP001, and RQ011 govern this procurement, incorporating standards from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition type. Packaging and handling must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The place of performance is Charleston AFB, South Carolina, under the Department of Defense’s Medical Supply Chain, and the procurement falls under NAICS code 339113 for surgical and medical instrument manufacturing.
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE SET, INTRAOSS
Solicitation # SPE2DS-26-T-301Q
The contract specifies the procurement of pediatric intraosseous needle sets designed for use with the EZ-IO battery-powered driver, intended for patients weighing between 3 and 39 kg. Each unit includes five sterile 15-gauge needles, each 15mm in length, constructed from 304 stainless steel and free of latex, along with five EZ-Connect connectors and five wrist bands for securement. The unit of issue is PG/5each, with a total order quantity of two packs. The materials must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and proper packaging is required to ensure protection from damage during transit, with commercial exterior containers suitable for safe delivery by common carriers at the lowest feasible rate. All supplies must be marked in accordance with DLA standards, and the vendor must provide the source and part number for each item supplied, tied to the NSN 6515-01-537-9013. Technical and quality requirements referenced in the DLA Master List apply, and the contract is subject to DLA packaging and defense information protocols. Delivery is required within 20 days of award, with performance specified at Charleston AFB, and the solicitation was issued under contract number SPE2DS-26-T-301Q with a bid deadline of August 10, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 315990
New
DIBBS
GLOVES, CHEMICAL AND
Solicitation # SPE2DS-26-T-300Z
The contract specifies the procurement of 8 pairs of chemical and oil protective gloves, made from neoprene over natural rubber with a 26 mil thickness and 12 inches in length, sized extra-large. The gloves are flock lined, feature a tractor tread grip, and are colored black-over-blue with a safety design. They are puncture resistant and offer resistance to acids, alcohols, oils, and caustics, meeting compliance with 21 CFR parts 170–199. The unit of issue is a pair, and the NSN is 8415-01-448-8646. Bidders must clearly state the source and part number being supplied, and all supplies must adhere to DLA packaging and technical requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The solicitation, identified as SPE2DS-26-T-300Z, was posted on August 3, 2026, with a response deadline of August 10, 2026, and requires delivery within 20 days after order placement. The purchase request number is 7017702020, and the place of performance is Beale AFB, California, with a ZIP code of 95903-1908. The contracting agency is the Department of Defense under the Medical Supply Chain MD Surg FSF unit, and the primary point of contact is Marc Canalichio, reachable via email and phone. The NAICS code is 315990, indicating the classification for other textile product mills, and the procurement is for federal use without a set-aside designation.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
TUBING, ANESTHESIA
Solicitation # SPE2DS-26-T-301G
The contract specifies the procurement of anesthesia tubing, 22mm by 36 inches, in boxes of ten units, with a total quantity of two boxes required. The item is identified by NSN 6515-01-667-6524 and is intended for medical use under the Department of Defense’s Medical Supply Chain. Packaging must comply with Commercial standards as outlined in the procurement documentation, requiring each unit to be sealed in a protective container to prevent damage, with exterior shipping containers suitable for safe transport by common carriers at the lowest cost to the delivery point at Camp Lejeune, NC. All items must be labeled in accordance with Medical Marking Standard No. 1, which replaces MIL-STD-129, and instructions for obtaining this standard are provided through DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Delivery is due within 20 days of award, and the solicitation was issued under contract number SPE2DS-26-T-301G with a response deadline of August 10, 2026. The contract is managed by Patrick Esposito of the Department of Defense, and the NAICS code for the procurement is 339112.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-302G
The airway device is a disposable supraglottic airway designed as a simple-to-use alternative for patient ventilation, featuring a dedicated channel that allows passage of a gastric tube and a straightened, beveled distal tip to facilitate proper placement posterior to the larynx and into the upper esophagus. Each unit includes a 60cc syringe and lubrication, is sized as size 5 with a purple tip, and measures 1.02 feet by 0.48 feet by 0.15 feet. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. Labeling must comply with the latest revision of MMS1A and include the manufacturer date, expiration or retest date, and contract and lot numbers. All packaging and marking must adhere to the Medical Marking Standard No. 1 and DLA packaging requirements, with government identification removed from non-accepted supplies. The item is identified by NSN 6515-01-699-9685, with a quantity of 20 units required under solicitation SPE2DS-26-T-302G, issued on August 3, 2026, and due for response by August 10, 2026. Delivery is expected within 20 days after order award to Fort Hood, Texas, with technical and quality specifications governed by the DLA Master List of Technical and Quality Requirements incorporated by reference. Bidders must provide the source and part number for the product being offered.
Surgical and Medical Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICAL
Solicitation # SPE2DS-26-T-300P
The contract specifies the procurement of sterile surgical sponges measuring 4 inches by 4 inches, packaged two per sealed envelope, with twenty-five envelopes per box and twelve hundred sponges per package. Each unit must maintain a shelf life of sixty months, with no more than nine months elapsed between the manufacturer’s date and the delivery date to the government. Packaging and labeling must adhere strictly to Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and must include the manufacturer date, expiration or retest date, contract number, and lot number. All packaging must be commercial-grade, sealed to protect contents from damage, and placed in suitable exterior shipping containers that ensure safe, low-cost delivery to the specified point of performance in APO, 96260-5479. The item, identified by NSN 6510-00-721-9808, is subject to technical and quality requirements listed in the DLA Master List, and bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-300P, requires delivery within fifty-three days and is governed by federal procurement rules with applicable defense information controls.
Surgical Appliance and Supplies Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details