Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

MIL-STD-129 Packaging and Marking Provider

Active

Federal

Response Deadline10/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing specialized military-grade packaging and marking services for aerospace hardware supporting the Department of Defense Fluid Handling Division. The selected provider will be responsible for utilizing industrial marking equipment and military-specification materials to ensure all unit packages are labeled with the required NSN, contract number, lot number, and cage codes. All work must be performed in strict accordance with MIL-STD-129 standards to ensure hardware is ready for final shipment to DLA Distribution San Diego. The project is categorized under NAICS code 561910 and will be performed in San Diego, California. Interested parties must adhere to the timeline established by the posting date of October 5, 2026, with a response deadline set for October 16, 2026.

General Info

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

561910 - Packaging and Labeling Services

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-0143.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAT, SERVOVALVE ASSEMB

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 5

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs military-grade packaging and marking for aerospace hardware for prime contractors on Fluid Handling Division projects. Marks unit packages with NSN, contract number, lot number, and cage codes using industrial marking equipment in strict accordance with MIL-STD-129. Utilizes military-specification packaging materials. Delivers properly marked and packaged hardware ready for shipment to DLA Distribution San Diego.

Similar Contracts

Same NAICS industry code

Industrial Packaging for Plastic ComponentsThis subcontract for Industrial Packaging for Plastic Components supports prime contractors on DLA Troop Support Construction and Equipment projects. The scope of work involves the professional packaging of both non-hazardous materials, following ASTM D3951 standards, and hazardous materials, adhering to TQ requirement IP025 and FED-STD-313. The selected provider will utilize industrial packaging materials and specialized hazardous material labeling systems to prepare commercially packaged units for delivery to the DDSP New Cumberland Facility. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910 for the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 16, 2026, to be considered for this requirement.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 12 hours ago

DEADLINE

Medical-Grade Packaging and Distribution ServicesThis subcontract for Medical-Grade Packaging and Distribution Services supports prime contractors on DLA Troop Support Medical Supply Chain projects. The scope of work involves specialized packaging of medical assemblies in accordance with ASTM D3951, applying markings per MIL-STD-129 and MMS No. 1, and executing palletization following RP001 standards. All items must be delivered FOB Destination to Kelly CSDC AFMEDCOM using the fastest traceable shipping methods available. Managed under the Department of Defense for the Medical Supply Chain MD Surg FSF, the performance of this contract is located in San Antonio, Texas. The opportunity is categorized under NAICS code 561910, with a response deadline set for October 13, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 12 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and ShippingThis subcontract opportunity involves providing specialized marking and packaging services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The primary scope of work requires the application of shipment markings in strict accordance with MIL-STD-129 and the provision of protective packaging for sensitive aircraft structural components. The contractor is responsible for using MIL-STD compliant labeling materials to ensure aircraft formers are properly prepared and ready for transport. The project will be performed at Tinker AFB, zip code 73145-8000, under NAICS code 561910. Interested parties should note that the solicitation was posted on October 5, 2026, with a response deadline of October 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Land and Maritime supply contracts under the Department of Defense. The scope of work involves performing specialized military packaging and marking, specifically adhering to MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment marking. Additionally, the provider must ensure all hazard labels comply with IP025 and 29 CFR 1910.1200 standards using military-grade materials and hazmat containment systems to deliver units ready for transport. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Interested parties must note the response deadline of October 16, 2026. This requirement is managed through the Maritime Supply Chain agency to ensure all logistics and safety standards are met for military supply chain operations.

MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on Maritime Supply Chain ESOC projects for the Department of Defense. The scope of work involves the specialized packaging, marking, and palletization of pistons to ensure they are ready for DLA shipment. All activities must strictly adhere to military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001 for palletization. Technical requirements specify the use of Preservation Method 41, Unit Container D3 OP1.O, and Intermediate Container E5. The work is to be performed in Silverdale, Washington, under NAICS code 561910. Interested parties should note the response deadline of October 19, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 12 hours ago

DEADLINE

DLA Compliant Packaging ServicesThis subcontract for DLA Compliant Packaging Services involves providing packaging materials and professional packing services for prime contractors fulfilling DLA supply contracts. The primary scope of work focuses on the Nut Bar Assembly, which must be packaged and labeled for shipment and long-term storage in strict accordance with RP001 DLA Packaging Requirements for Procurement and MIL-SPEC material standards. The contract is issued under the Department of Defense through Land Supplier Opns Engines, with performance taking place in Tracy, California. Interested parties must respond by October 16, 2026, regarding this opportunity categorized under NAICS code 561910.

LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

DLA Compliant Packaging and PalletizationThis subcontract for the Department of Defense Land Supply Chain involves providing professional packaging and palletization services for prime contractors. The scope of work requires the palletization of 400 disks using industrial equipment and DLA-approved materials, ensuring strict adherence to RP001 DLA Packaging Requirements for Procurement to produce a shipment ready for agency delivery. The project is categorized under NAICS code 561910 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 16, 2026, for this specific procurement effort.

LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling ServicesThis subcontract for MIL-SPEC Packaging and Labeling Services involves providing specialized packaging, marking, and labeling for prime contractors supporting DLA supply contracts. The scope of work requires the processing of 89 hardware units in strict accordance with ASTM D3951 and RP001 DLA Packaging Requirements, utilizing MIL-SPEC cushioning and moisture barriers. Additionally, all marking and labeling must comply with MIL-STD-129 standards using approved labeling systems to ensure readiness for government shipment. The project is managed under the Department of Defense through the Land Supplier Opns Engines agency, with performance taking place in Tracy, California. The contract falls under NAICS code 561910 and was posted on October 5, 2026, with a response deadline of October 16, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for DLA HardwareThis subcontract involves providing military-grade packaging and labeling services for precision spacers on behalf of prime contractors supporting the DLA Weapons Support ASC. The scope of work requires strict adherence to ASTM D3951 and RP001 standards for packaging, while all marking and labeling must be executed using specialized equipment in compliance with MIL-STD-129. The final deliverables consist of fully packaged and labeled spacers ready for direct shipment to the designated DLA DoDAAC. This project falls under NAICS code 561910 and is managed by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Division, with the place of performance located at FPO 09592-4700.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

MIL-STD-129 Packaging and Palletization ServicesThis subcontract for the Department of Defense, specifically under the Puget Sound agency, involves providing specialized marking, labeling, and palletization services for prime contractors delivering hardware to DLA Land and Maritime. The scope of work requires the use of industrial labeling systems and compliant securing materials to ensure all packaging meets MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The final objective is to deliver palletized shipments that are fully prepared for FDT. Performance of these services will take place in Bremerton, Washington. To be eligible, the provider must hold certifications in both MIL-STD-129 and RP001 standards. This opportunity falls under NAICS code 561910, with a response deadline set for October 15, 2026.

POSTED

DEADLINE

Medical Grade Packaging and Labeling ServicesThis subcontract for Medical Grade Packaging and Labeling Services supports prime contractors on Department of Defense projects for the DLA Troop Support Medical Supply Chain Pharm FSA. The scope of work involves performing specialized packaging and marking of pharmaceutical shipments to ensure they are ready for distribution. All activities must strictly adhere to Medical Marking Standard No. 1 and RP001 DLA Packaging Requirements, including the use of medical-grade materials and hazardous material identification in compliance with FAR 52.23-3. The project is categorized under NAICS code 561910 and will be performed in Watervliet, New York. Interested parties should note the response deadline of October 13, 2026, for this specialized logistics requirement.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging and marking for prime contractors supporting DLA Troop Support projects. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 DLA Packaging Requirements for packaging, while markings and labels must comply with MIL-STD-129. The service provider is expected to utilize industrial labeling equipment and military-grade materials to ensure all shipments are ready for DLA acceptance. The project is managed under the Department of Defense and falls under NAICS code 561910. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 15, 2026, for this specific procurement opportunity.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Nonmetallic Hose Assembly Supplier (NSN 4720-00-251-0848)This subcontract, issued by the Department of Defense Fluid Handling Division, requires the manufacture or sourcing of 59,000 nonmetallic hose assemblies. The specific components must adhere to NSN 4720-00-251-0848, featuring a 1-38 inch inner diameter and a length of 34-1/2 inches. Performance will take place at Tinker AFB, and the contract is designated as a total small business set-aside under NAICS code 339113. The supplier is responsible for providing finished assemblies along with essential quality documentation, including a Certificate of Conformance per FAR 52.246-15. Additionally, the contractor must maintain strict compliance with DFARS 252.204-7012 cybersecurity standards. The solicitation was posted on October 5, 2026, with a response deadline of October 19, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Nonmetallic Hoses (NSN 4720013995562)This subcontract through the Department of Defense Fluid Handling Division requires the procurement or manufacture of five nonmetallic hoses. The supplied units must strictly adhere to NSN 4720013995562 and Hatz Diesel of America Inc P/N 05339600 specifications to support prime contractors. In addition to the hardware, the contractor is responsible for providing Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The opportunity is categorized under NAICS code 424690, with a response deadline set for October 16, 2026.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Mooring Buoy SupplierThis subcontract involves the procurement and delivery of seven commercial off-the-shelf mooring buoys for prime contractors supporting Department of Defense projects under the DLA Fluid Handling Division. The supplier is responsible for providing Fisheries Supply Co part number 4403-W, ensuring all items adhere to DLA Packaging Requirement RP001 and are delivered to the designated government location in Jacksonville, Florida. The scope of work includes comprehensive shipping and logistics management, specifically requiring ocean bills of lading that comply with MARAD standards. This requirement falls under NAICS code 423830, with a response deadline set for October 16, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

MIL-STD-2073-1 Kitting and Packaging ProviderThis subcontract involves providing specialized packaging and kitting services for prime contractors supporting DLA Land and Maritime projects. The scope of work requires the assembly of parts into kits according to MIL-STD-2073-1 Appendix D, the application of preservation methods per QUP:001, and palletization in compliance with RP001 DLA Packaging Requirements. Additionally, all items must be marked in accordance with MIL-STD-129. The project entails the delivery of 584 kitted and palletized units ready for shipment to DLA Distribution Cherry Point. Managed by the Fluid Handling Division of the Department of Defense under NAICS code 339999, the performance of this contract will take place in Cherry Point, North Carolina.

All Other Miscellaneous Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Pressure Regulating Valve Parts Kits (NSN 4820-01-449-7576)This subcontract involves the manufacture and supply of 584 pressure regulating valve parts kits under NSN 4820-01-449-7576 for prime contractors supporting the Department of Defense, specifically the DLA Land and Maritime Fluid Handling Division. The work is categorized under NAICS code 333911 and will be performed in Cherry Point. The contractor must ensure all components strictly adhere to Navy Identified Critical Safety Item standards and comply with MIL-STD-129 marking requirements. Additionally, the agreement prohibits the use of Class I Ozone Depleting Chemicals during the production process. The solicitation was posted on October 5, 2026, with a response deadline of October 16, 2026.

Pump and Pumping Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Pipe Tees (Part No. M1183/9-439-A)This subcontract involves the procurement of 43 units of Pipe Tees, specifically Part No. M1183/9-439-A, to support prime contractors on projects for the Department of Defense Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the components and ensuring that all items are delivered to Tracy, California. Strict adherence to military specifications is required, with packaging and marking performed according to MIL-STD-2073-1E and MIL-STD-129, respectively. Additionally, the contractor must ensure that brazing rings are secured in waterproof bags and attached to the main components prior to delivery.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Brush Holder Assemblies (NSN 1710-00-313-4151)This subcontract with the Department of Defense Fluid Handling Division requires the manufacture or sourcing of three Brush Holder Assemblies under NSN 1710-00-313-4151. The selected provider must ensure all components are prepared for delivery in strict accordance with MIL-STD-2073-1E and maintain full compliance with FAR 52.211-5. The contractor must possess the operational capability to meet a strict 20-day delivery window to the designated government destination. This opportunity falls under NAICS code 335999, with a response deadline set for October 16, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacture and Supply of Bent Metallic Tubes (NSN 4710-01-423-3514)This subcontract involves the manufacture and supply of bent metallic tube components for the Department of Defense Fluid Handling Division, specifically supporting DLA Land and Maritime projects. The contractor is responsible for bending and forming metallic tubing to meet NSN 4710-01-423-3514 geometry specifications and performing Level A preservation in accordance with MIL-H-775. The scope of work includes the delivery of 11 production units and 2 First Article Testing units for Robins AFB. Strict adherence to military standards is required, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The project falls under NAICS code 332999 and is centered at the Robins Air Force Base place of performance. Interested parties must note the response deadline of October 16, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Precision Steel Mesh SupplierThis subcontract involves the supply of high-precision industrial-grade steel wire mesh to prime contractors supporting Department of Defense DLA Land and Maritime fluid handling contracts. The required material must feature a precise 100 X 100 mesh count with wire diameter tolerances of .0045. The supplier is responsible for providing material certifications that verify both the mesh count and wire diameter to ensure strict adherence to technical specifications. The scope of work includes delivering the steel mesh either cut to size or in rolls, specifically for the fabrication of six suction strainers. This procurement falls under NAICS code 332992 and is managed by the Fluid Handling Division. Interested parties must adhere to the response deadline of October 16, 2026.

Small Arms Ammunition Manufacturing

POSTED

about 12 hours ago

DEADLINE

Suction Strainer Manufacturer/SupplierThis subcontract involves the manufacture and supply of six finished suction strainers for prime contractors supporting Department of Defense DLA Land and Maritime fluid handling contracts. The supplier is responsible for fabricating components by integrating a 100 x 100 mesh steel screen with a .0045 wire diameter into a fitting and end cap machined from Aluminum Alloy 6061. All units must strictly adhere to Maradyne Corporation P/N 201540 specifications as well as MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking. The procurement falls under NAICS code 332999, with a response deadline set for October 16, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Injector Sleeves (Critical Safety Item)This subcontract involves the manufacture or procurement of eight injector sleeve units, part number 1602956-1, for prime contractors working on Fluid Handling Division projects under the Department of Defense. Because these components are designated as Navy Identified Critical Safety Items, the provider must maintain strict quality assurance and traceability standards to ensure operational safety. The contract requires full compliance with DFARS 252.204-7012 and the Hazard Communication Standard 29 CFR 1910.1200 regarding packaging and safety. Performance for this requirement is centered in Jacksonville, Florida, with a response deadline set for October 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Casting Alloy/Metal SupplyThis subcontract, titled Casting Alloy/Metal Supply, involves the sourcing and delivery of military-grade raw metal alloys and ingots for the Department of Defense Fluid Handling Division. The materials are specifically required for the casting of grenade discharger components and will be delivered to Anniston, Alabama. To ensure strict quality control and adherence to military specifications, the supplier must provide comprehensive material certifications and mill test reports verifying the composition of the alloys. The opportunity was posted on October 5, 2026, with a response deadline of October 16, 2026, falling under NAICS code 331110.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 12 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS