Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

MIL-STD-130 Item Unique Identification (IUID) Marking

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the application of permanent Data Matrix ECC 200 Item Unique Identification (IUID) markings to each bulkhead seal in strict compliance with MIL-STD-130 Revision N to ensure full traceability for the Department of Defense. This marking standard mandates the use of machine-readable Data Matrix symbols encoded with ECC 200 error correction to guarantee durability and accurate scanning under operational conditions. The work is performed as a subcontract under the NAICS code 339991, indicating specialized manufacturing activities, and is managed by the Defense Logistics Agency through its SPRMM1 DLA Mechanicsburg office. All markings must meet exacting DoD requirements for permanence, legibility, and placement to support asset tracking throughout the lifecycle of the equipment. The contract was posted on May 4, 2026, and the performance location is unspecified, but the work is tied directly to DoD inventory and logistics systems requiring full compliance with federal marking standards.

General Info

Apply permanent MIL-STD-130 N Data Matrix ECC 200 IUID marks to bulkhead seals for DoD traceability.

Agency

Department Of Defense → SPRMM1 DLA MechanicsburgView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126FE81E.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2040-BULKHEAD SEAL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedMay 4

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Apply permanent Data Matrix ECC 200 IUID markings to each bulkhead seal in compliance with MIL-STD-130 Rev N for DoD traceability.

Similar Contracts

Same NAICS industry code

COUPLING, FLEXIBLE

Solicitation # SPE4A7-26-R-0778

Solicitation SPE4A7-26-R-0778 is an Indefinite Quantity Contract issued by DLA Aviation for the procurement of Flexible Couplings (NSN 1660-00-560-4009), identified as a Critical Application Item. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. Delivery is required 365 days after receipt of order, with inspection and acceptance occurring at the destination. The procurement is a Firm Fixed Price agreement and allows for approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for Source Approval Requests, tailored higher-level quality requirements, and CMMC Level 2 self-assessment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Item Unique Identification is not required per DFARS 252.211-7003(c)(1)(i). Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

in about 1 month

PACKING, PREFORMED

Solicitation # SPE7L3-26-T-237G

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 407 units of preformed packing under NSN 5330-00-922-5947. The contract is open for full and open competition with a delivery requirement of 46 days after the order is placed. The items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The procurement is subject to several technical and quality requirements, including DLA packaging standards and configuration change management protocols. Notably, the items are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. All suppliers must adhere to the DLA Master List of Technical and Quality Requirements and comply with regulations regarding covered defense information and the removal of government identification from non-accepted supplies.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 11 hours ago

DEADLINE

Hydraulic Seal & Gasket Supply

Ok DLA Aviation At Oklahoma City

POSTED

about 16 hours ago

DEADLINE

in about 1 month

SEAL ASSEMBLY KIT

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

DLA Land And Maritime

POSTED

about 16 hours ago

DEADLINE

53--PARTS KIT,SEAL REPLACE

Solicitation # SPE7L3-26-T-248P

Solicitation SPE7L3-26-T-248P is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of three seal replacement parts kits for mechanical equipment, identified by NSN 5330015981569. This is a fixed-price contract designated as a total small business set-aside under NAICS code 339991. The approved source is listed as 0B9E8 70J600-5. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. The required delivery date is November 11, 2027, with a need ship date of March 9, 2027, and a delivery period of 168 days. Delivery is FOB Destination to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for UV-sensitive items to be sealed in opaque bags per MIL-DTL-117. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Award may be determined via an automated process, and a HUBZone price evaluation preference may be applied.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

53--SEAL,INFLATABLE

Solicitation # SPE7L3-26-T-247F

Solicitation SPE7L3-26-T-247F is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 11 inflatable seals identified by NSN 5330002252287. This procurement is set aside exclusively for SBA-certified Women-Owned Small Business (WOSB) concerns. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The required delivery date is April 11, 2027, with a need ship date of January 22, 2027, and shipping terms are FOB Destination to the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-130N for identification. Due to the nature of the items, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and comply with MIL-STD-2073-1E and RP001 for palletization. All supplied items must be free of asbestos. Offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are used. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The award may be processed as an automated award, and offerors are encouraged to provide quantity ranges in their quotes.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-10U5

Solicitation SPE7L1-26-T-10U5 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 14 units of O-rings under NSN 5331014745530. This is designated as a critical application item under NAICS code 339991. The procurement is managed by the Land Supply Chain office in Columbus, Ohio, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The approved source for this item is 0AZ22 V24509-20-07-18. The delivery requirement is set for 147 days after order, with a need ship date of February 16, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. The contract specifies FOB Origin terms, while inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The solicitation incorporates several FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and sustainable products. Offerors are assumed to provide supplies of domestic origin unless otherwise indicated.

LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-002P

Solicitation SPE7LX-26-U-002P is a request for quotations from the Department of Defense, specifically the Strategic Acquisition Program Directorate under DLA Land and Maritime, for the procurement of gaskets identified by NSN 5330150110674. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 157 units, with a guaranteed minimum quantity of 23 and an expected average of 12 orders per year. Delivery is required within 97 days of order, with shipments directed to various CONUS and OCONUS DLA Depots. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-117 for the use of medium duty, waterproof, greaseproof, opaque bags to prevent UV deterioration. All quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award evaluation will be based on the price quoted for the estimated annual demand. Additionally, contractors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area Workflow system for all invoicing and receiving reports. Inspection and acceptance will occur at the destination.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

SEAL,AIR,NONAIRCRAF — 2835014700838 — SPRMM126QHE54

Solicitation # SPRMM126QHE54

This solicitation, issued by DLA Mechanicsburg under FAR Part 12 and FAR Part 18 Emergency Acquisition Flexibilities, seeks quotes for the manufacture of non-aircraft air seals. Award evaluations will be based on the Lowest Price Technically Acceptable criteria. The contract requires strict adherence to item unique identification and marking standards per MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must submit invoices and receiving reports electronically via PIEE-WAWF. The agreement includes specific protocols for design changes, requiring a coded notification system for any substitutions. Additionally, the contract mandates that production facility changes be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Specialized Gasketing & Sealing Materials Supply

Procurement-Goods & Services

POSTED

DEADLINE

O-Ring Supply (NSN 5331002639540)

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Critical Application Gaskets

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Chain Hoist Manufacturer/Supplier

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

SPRMM1-26-Q-GC63-CHAIN HOIST

Solicitation # SPRMM1-26-Q-GC63

Solicitation SPRMM1-26-Q-GC63, issued by DLA Mechanicsburg, is a request for quotations for two chain hoists, identified by NSN 7HH 3950-01-702-6959 and reference number 8196788-2. This procurement is designated as a high-priority requirement to support a US Navy CASREP due to mission-essential equipment breakdown. The delivery is required as soon as possible on an FOB Destination basis, with the primary shipment destination being the USS John P Murtha LPD 26. The contractor must ensure all items are new and unused, adhering to strict packaging and marking standards including MIL-STD-2073, MIL-STD-129, and MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and evidence of product traceability. The solicitation is not a small business set-aside, and the evaluation will be conducted based on the criteria for part-numbered items.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 16 hours ago

DEADLINE

TRANSMITTER,PRESSUR

Solicitation # SPRMM126QKH36

This fixed-price solicitation from DLA Mechanicsburg is for the manufacture and supply of a pressure transmitter, specifically referencing Cage Code 81349 and part number PGT-GP-100-G2. The contract requires the item to be listed on Qualified Products List 24212, and award evaluations will be based on Lowest Price Technically Acceptable criteria. Contractors must provide an informal cost breakdown to determine fair pricing and must identify the Original Equipment Manufacturer if they are not the manufacturer themselves. Key administrative requirements include the mandatory use of Wide Area Workflow for combined invoice and receiving reports and CMMC Level 1 self-certification for cybersecurity. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD 2073. The government mandates that any changes in production facilities be approved in writing by the Contracting Officer and may require a fee to cover administrative costs. Authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 16 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QKG67

This solicitation is for the manufacture and procurement of a circuit card assembly, identified by CAGE code 3SDB5 and reference number 937E343G1. The contract is issued by the Defense Logistics Agency (DLA) Mechanicsburg and will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. The current deadline for the submission of quotes has been extended to October 13, 2026. Key requirements include adherence to ISO9001 quality standards, MIL-STD-130 for physical identification, and MIL-STD 2073 for packaging. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. Additionally, authorized distributors must provide proof of authorization on company letterhead to be considered for the award.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

in about 1 month

PUMP UNIT,CENTRIFUG

Solicitation # SPRMM126RMC71

This solicitation, issued by DLA Weapons Support Mechanicsburg, is for the manufacture and procurement of a Centrifugal Pump Unit, identified by NSN 4320-012274925 and part number 5773203-24. The requirement specifies that the unit must meet the design and performance standards of drawing 5773203-24 from the Naval Sea Systems Command (CAGE 53711). The procurement is a fixed-price effort utilizing Lowest Price Technically Acceptable (LPTA) criteria for award evaluations. Key quality requirements include higher level inspection, with source inspection required at the manufacturing facility, and physical identification in accordance with MIL-STD-130. The solicitation has undergone several amendments, including the incorporation of Emergency Acquisition Flexibilities, the dissolution of the small business set-aside, and an increase in quantity with the addition of CLIN 0001AC. The final deadline for the receipt of proposals was established as September 15, 2026, at 4:00 pm EST. Contractors are required to submit invoices and receiving reports via the PIEE-WAWF system. Additionally, any offeror who is not the original equipment manufacturer must identify the OEM and their CAGE code. All contractual documents are considered issued upon transmission via mail, facsimile, or electronic commerce methods.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

DEADLINE

SERVER,AUTOMATIC DA

Solicitation # SPRMM126QKB48

This solicitation is for the manufacture and procurement of the Server, Automatic DA, identified by part number F109656-C and Cage Code 1BEK6. The contract is issued by the Department of Defense via DLA Mechanicsburg under SEPA-EAF authority. Key requirements include strict adherence to MIL-STD-130 for physical identification and MIL-STD 2073 for packaging. Because the item is intended for use on submarines or surface ships, it must be entirely free of metallic mercury contamination. The procurement process requires electronic submission of invoices and receiving reports through PIEE-WAWF. Offerors who are not the original equipment manufacturer must identify the OEM and their CAGE code. The current deadline for quote submissions is September 29, 2026. Vendors are encouraged to provide quantity price breaks and must provide proof of authorized distribution if they are not the manufacturer. All contractual documents are considered issued when sent via mail, facsimile, or electronic commerce methods.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Military Standard Marking and Packaging

Marking Device Manufacturing

POSTED

DEADLINE

Oxygen System Component Cleaning Services

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Manufacturing of Cylinder Assembly, A

POSTED

DEADLINE

Material Traceability and Compliance Auditor

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Centrifugal Pump Supplier (OEM or Authorized Distributor)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

SHELL AY(PRT SIDE)

Solicitation # SPRMM126QGE59

Solicitation SPRMM126QGE59, issued by DLA Mechanicsburg, seeks quotes for the manufacture and supply of a Shell Assembly (Port Side), identified by NIIN 016409626. Following Amendment 0002, the requirement has been updated to part number 484478 and Technical Data Package (TDP) Version 003. The procurement is unrestricted and requires the delivery of new, unused materials that conform to ISO 9001 quality standards. A critical technical requirement is that all materials must be mercury-free to prevent corrosion and toxicity risks on submarines and surface ships. The contract mandates strict adherence to MIL-STD-129 for physical identification and Item Unique Identification (IUID) requirements. Packaging must comply with MIL-STD-2073-1 for stock shipments, with specific levels designated for domestic and overseas delivery. Inspection and final acceptance will occur at the contractor's or subcontractor's plant. Offerors who are not the original equipment manufacturer must provide the OEM CAGE code and part number. All invoicing and receiving reports must be submitted electronically through the Wide Area Workflow (WAWF) system. The current deadline for the submission of quotes is September 30, 2026.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS