Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-STD-810 Environmental Testing & Qualification Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves providing third-party environmental testing and qualification services for the RHNB in accordance with MIL-STD-810 standards. The scope includes a comprehensive range of tests such as vibration, shock, temperature cycling, humidity, submergence, fungus resistance, and gun-firing events to ensure the equipment meets stringent military environmental requirements. These tests are critical to validate the durability and performance of the RHNB under various harsh conditions. This subcontract, designated under NAICS code 541380, is issued by the Defense Logistics Agency Land Warren, part of the Department of Defense. The work is to be performed in Ottawa, Canada, with a focus on rigorous military-grade testing and environmental qualification. The contract supports the defense supply chain by ensuring that the RHNB meets all necessary compliance standards for operational readiness and reliability in combat or extreme environments.

General Info

Third-party environmental testing and qualification of RHNB per MIL-STD-810 for military durability.

Agency

Department Of Defense → DLA Land Warren

NAICS

541380 - Testing Laboratories and Services

Place of Performance

OTTAWA, CA-ON, K2H, CAN

Set-Aside

NONE

Documents

This scope was carved out of SPRDL1-24-R-0161.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Redacted Justification & Approval (J&A)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 12

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land Warren

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Land Warren

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Third-party environmental testing and qualification of the RHNB per MIL-STD-810, including vibration, shock, temperature cycling, humidity, submergence, fungus resistance, and gun-firing events.

Similar Contracts

Same NAICS industry code

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

about 9 hours ago

DEADLINE

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 10 hours ago

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

about 13 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

about 13 hours ago

DEADLINE

Structural Special Inspections and Third-Party Review

DAS Procurement

POSTED

about 14 hours ago

DEADLINE

Construction Materials Testing (CMT)This subcontract for Construction Materials Testing (CMT) involves providing specialized laboratory testing services for prime contractors operating on projects at California State University, Chico. The scope of work includes the collection of field samples for asphalt, soil, and concrete, followed by rigorous laboratory analysis to determine composition, compaction, and strength utilizing sieves and compression machines. All testing procedures must strictly adhere to ASTM standards to ensure structural integrity and quality control. The selected provider is responsible for delivering detailed daily reports and comprehensive material test result summaries. This opportunity is categorized under NAICS code 541380 and is centered in Chico, California. Interested parties must submit their responses by the deadline of November 5, 2026.

California State University, Chico

POSTED

about 18 hours ago

DEADLINE

Certified Welding Inspection ServicesThis subcontract for Certified Welding Inspection Services involves providing specialized inspection and testing of structural steel components and welding for prime contractors at California State University, Chico. The scope of work includes conducting visual inspections of welds, performing non-destructive testing on structural joints, and verifying that all welding procedures are followed correctly. All services must be delivered in the form of detailed welding inspection reports and test results. To ensure quality and safety, the contractor must employ AWS/SNT Certified Welding Inspectors and maintain strict compliance with AWS and ANSI standards. The project is located in Chico, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

California State University, Chico

POSTED

about 18 hours ago

DEADLINE

Campus Consulting – Construction Materials Testing And Special Inspection Services

Solicitation # RFP2026-08AM

California State University, Chico is soliciting proposals under RFP2026-08AM for a non-exclusive Task Order Service Agreement to provide special inspection and materials testing services. The selected service provider will supply certified staff, including ICBO Certified Special Inspectors and AWS/SNT Certified Welding Inspectors, to support contractors on an as-needed basis. All work must comply with the 2025 California Building Code and relevant ASTM, ICBO, and ANSI standards. The contract has an initial term of two years, with the option to renew for two additional two-year terms. Proposals are due by November 5, 2026, at 3:00 PM and must be submitted electronically to Amber Marquis. Evaluation criteria include a standard fee schedule, firm experience, staffing resumes, project history regarding scale and average cost, and specific experience with California State University institutions. Awarded providers must register with the Department of Industrial Relations for prevailing wage compliance and maintain comprehensive general liability insurance with a 4 million dollar general aggregate. Additionally, the contract requires that all work be performed within the United States and prohibits the provider from advising the university on public contracting. Payments will be processed monthly in arrears using the CSU invoice format.

California State University, Chico

POSTED

about 18 hours ago

DEADLINE

Water Treatment & Chemical Dosing Systems

City & County of Swansea

POSTED

about 18 hours ago

DEADLINE

Groundwater Sampling and Compliance Testing

Environment, Conservation and Parks

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Asphalt and Concrete Materials TestingThis subcontract for Asphalt and Concrete Materials Testing involves providing specialized laboratory testing and calibration services for prime contractors working on Virginia Department of Transportation projects in Prince William County. The scope of work includes the preparation of job-mix formulas for asphalt and Crushed Hydraulic Cement Concrete, aggregate property testing, and ignition furnace calibration in accordance with VTM 102. To be eligible, the contractor must operate a VDOT-approved testing laboratory and be capable of delivering certified test results and approved job-mix formulas. The solicitation was posted on October 27, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.

Virginia Department of Transportation

POSTED

about 19 hours ago

DEADLINE

Systems Integration & Qualification TestingThis subcontract for Systems Integration and Qualification Testing supports US Navy NAWCAD WOLF radar projects under the Department of Defense. The selected provider will perform integration and test services, qualification testing, and the development of Engineering Development Modules for prime contractors. Key deliverables include comprehensive test reports and functional modules, requiring the contractor to possess specialized testing facilities capable of simulating radar system components and a deep understanding of Navy qualification protocols. The project is categorized under NAICS code 541380 and will be performed in Sparks. Interested parties must adhere to the response deadline of November 12, 2026.

Naval Air Warfare Center Air Division

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land Warren

Same awarding agency

Transfer Transmission

Solicitation # SPRDL127RA047

POSTED

about 20 hours ago

DEADLINE

TEST SET, ELECTRONIC

Solicitation # SPRDL126RA024

The Department of Defense, through DLA Land Warren, has issued a sources sought notice, solicitation number SPRDL126RA024, to conduct market research for the acquisition of electronic test sets. The requirement is for 96 units, with 100 percent options, identified by NSN 6625016820146 and part number 12992652. These test sets are intended for use with the Abrams end item and must be acquired from manufacturing sources specified on a source control or selected item drawing as defined by the current version of ASME Y14.100. This action is a market research survey under FAR Part 10 to identify potential sources and determine if additional approved sources exist beyond the currently proposed source, DRS, identified by CAGE code 24290. This notice is not an open solicitation, invitation for bid, or request for proposal, and responses are voluntary. The deadline for capability information was October 1, 2026. The procurement falls under NAICS code 334419 and is not set aside for any specific socioeconomic category.

Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 2 months

Camera, Television

Solicitation # SPRDL1-27-R-A018

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPRDL1-27-R-A046

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

PRESSURE INTENSIFIER UNIT

Solicitation # SPRDL1-26-Q-0098

Solicitation SPRDL1-26-Q-0098 is a firm-fixed-price request for quotation issued by DLA Land Warren for the acquisition of Pressure Intensifier Units, NSN 2590-99-574-4716, Part Number CS2052. This procurement is a Total Small Business Set-Aside and is restricted to the approved source, Pearson Engineering Limited (CAGE K0824), or its authorized distributors. The requirement consists of a basic quantity of 6 units with an unexercised option for an additional 6 units. Delivery is required within 180 days after award to DLA Distribution Anniston, Alabama, with the FOB point designated as Destination. The government may utilize an online reverse auction as a pricing technique to establish final offered prices. Award will be based on the lowest evaluated offer or best value, including the price for 100 percent of the option quantity. Technical data access is restricted to those certified under the United States/Canada Joint Certification Program. Contractors must adhere to strict military packaging standards, including MIL-STD-2073-1 and MIL-STD-129, and must coordinate with the DCMA for inspection and acceptance at the point of origin before shipping. Additionally, the contract requires CMMC Level 2 (Self) certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information.

Other Motor Vehicle Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 5 hours

Supply of Hydraulic Motor Heads (NSN 4320-00-722-3536)This subcontract through DLA Land Warren involves the procurement and delivery of 82 genuine hydraulic motor heads under NSN 4320-00-722-3536. The contractor is required to supply authentic parts matching Manufacturer Part Numbers HD8821A or HD0021A, sourced specifically from AMBAC International Corporation to meet strict source-controlled requirements. The agreement mandates full compliance with government packaging and marking specifications and carries a DPAS Priority Rating of DO-A4. This effort supports prime contractors on DLA and Army supply contracts, ensuring the delivery of authenticated components according to the specified technical standards.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Hydraulic Motor Pump Head

Solicitation # SPRDL1-27-R-A039

Solicitation SPRDL1-27-R-A039 is a sole source procurement issued by DLA Land Warren for the acquisition of 82 Hydraulic Motor Heads (NSN 4320-00-722-3536, Part Number HD8821A/HD0021A) from AMBAC International Corporation. The requirement includes an initial quantity of 82 units to be delivered within 365 days of award, with an additional unexercised option for 82 units. This is a source-controlled procurement conducted because the government lacks the technical data necessary for competitive reprocurement. The offer due date is November 26, 2026. The contract is a firm-fixed-price arrangement with FOB Destination terms. Inspection and acceptance are primarily conducted at the origin, requiring coordination with the DCMA. Packaging must adhere to MIL-STD-2073-1 and MIL-STD-129, with specific requirements for military preservation level B and individual unit packaging. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. Award will be based on the lowest evaluated offer that meets all material and responsibility criteria per FAR 9.104, with specific evaluation factors applied for HUBZone small businesses and Engineering Support Activity coordination.

Fluid Power Pump and Motor Manufacturing

POSTED

DEADLINE

Distribution Box

Solicitation # SPRDL1-27-R-A033

This pre-solicitation notice issued by the DLA Land Warren for the Department of Defense seeks the procurement of 114 Distribution Boxes, identified by NSN 6110-01-463-3913 and Part Number 12463100, with a 100 percent option. The contract is a total Small Business Set Aside under NAICS code 334418, with shipping terms set as FOB Destination. The current solicitation number is SPRDL1-27-R-A033, replacing all previous numbers. The procurement process may utilize a reverse auction as a pricing technique per DLAD provision 52.215-9023. If a reverse auction is conducted, participating contractors must be registered in the designated system and their representatives must complete required online training. The response deadline for this opportunity is November 10, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Hydraulic Manifold SupplierThis small business set-aside subcontract through DLA Land Warren involves the procurement of eight hydraulic manifolds for Department of Defense aircraft parts contracts. The supplier is responsible for sourcing and delivering units matching NSN 4730-01-672-3856 and OEM Part Number 401/B1277. To ensure part integrity and traceability, the contractor must provide proof of authenticity and OEM certification while adhering to all Department of Defense Item Unique Identification requirements. The opportunity was posted on October 23, 2026, with a response deadline of November 23, 2026, under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Power Supply Set

Solicitation # SPRDL1-27-R-A017

This firm fixed price contract, issued by the DLA Land Warren under the Department of Defense, is for the procurement of 143 Power Supply Sets, with an additional option for 143 units. The required items are manufactured by Thales Defense and Security, part number 1100782-501, and the delivery terms are FOB Destination. To ensure quality and authenticity, the buyer will only consider offers from approved sources or authorized distributors. The solicitation is expected to be released around November 19, 2026, with a closing date approximately January 5, 2027. A key feature of this procurement is the potential use of a reverse auction for pricing, which would require participating contractors to be registered in the system and have completed the necessary online training. Interested parties should monitor the solicitation for final dates and coordinate with the primary point of contact, Jon Machacek, for further details.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Manifold, Hydraulics

Solicitation # SPRDL1-27-Q-A006

Solicitation SPRDL1-27-Q-A006 is a firm-fixed-price procurement issued by DLA Land Warren for the supply of eight hydraulic manifolds, NSN 4730-01-672-3856. This requirement is a total small business set-aside under NAICS code 336350, specifically requiring the approved manufacturer part number 401/B1277 from JCB Inc (CAGE 0JKF0). The contract includes a base quantity of eight units and an unexercised option for an additional eight units, which must be delivered within 240 calendar days from the date of award. Delivery is FOB Destination to the DLA Distribution Red River facility in Texarkana, Texas. The government will award the contract based on the lowest evaluated price and the offeror's ability to meet all material and responsibility criteria. Inspection and acceptance will occur at the origin, requiring the contractor to coordinate with the DCMA prior to shipment. Strict adherence to military packaging and marking standards is required, including MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130 for unique item identification. Additionally, contractors must provide supply chain traceability documentation and maintain a CMMC unique identifier for any systems processing controlled information. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Motor Vehicle Transmission and Power Train Parts Manufacturing

POSTED

DEADLINE

Unmanned Vehicle, Ground

Solicitation # SPRDL1-27-R-A035

The Department of Defense, through DLA Land Warren, is issuing a sources sought notice for the procurement of gripper assemblies for the MTRS Inc II unmanned ground vehicle. These assemblies, identified by NSN 2360-01-699-8512 and part number 4524493, are critical components for robotic arm functionality and include a two-finger gripper, cameras, onboard sensors, and an accessory mounting rail. The projected requirement consists of a base quantity of 12 units with an additional option for 12 units. This opportunity is designated as a total small business set-aside under NAICS code 334511. Interested parties must submit their responses by November 5, 2026. It is important to note that this is not an open solicitation for bids; rather, it is a market research effort. Potential vendors must undergo qualification testing and evaluation to become an approved source, which grants the opportunity to compete for future contracts but does not guarantee a business award.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Quality Assurance and Inspection Services

POSTED

CLOSED

Precision Calibration and Metrology Services for SLR Systems

NASA Goddard Space Flight Center

POSTED

CLOSED

Geochemical Data Packaging and QA/QC Documentation

Ofc Of Acqusition Grants-National

POSTED

CLOSED

EA-IRMS Carbon Isotope Analysis

Ofc Of Acqusition Grants-National

POSTED

CLOSED

Total Organic Carbon (TOC) Analysis of Geological Samples

Ofc Of Acqusition Grants-National

POSTED

CLOSED

Petroleum Well Cuttings Sample Washing and Decontamination

Ofc Of Acqusition Grants-National

POSTED

CLOSED

Radiopharmaceutical Quality Control and Compliance Services

244-NETWORK Contract Office 4 (36C244)

POSTED

CLOSED

Compliance and Certification Services

Nps Conops Strategic DOI

POSTED

CLOSED

Special Organic Contaminants and Nitrate Testing for Drinking Water

W6QM Micc-Ft Belvoir

POSTED

CLOSED

Trihalomethane and Haloacetic Acid Testing

W6QM Micc-Ft Belvoir

POSTED

CLOSED

Drinking Water TOC and Coliform Testing

W6QM Micc-Ft Belvoir

POSTED

CLOSED

Treated Sludge Analysis

W6QM Micc-Ft Belvoir

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS