Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

MIL-STD Compliance and WGS Certification Testing

Active

Federal

Response Deadline12/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled MIL-STD Compliance and WGS Certification Testing, involves providing specialized testing services for prime contractors supporting Army ACC-APG PdM WESS projects. The primary objective is to verify DIFS military environment requirements through rigorous technical evaluations. The scope of work includes conducting EMI testing according to MIL-STD-461G, environmental testing per MIL-STD-810H, and interoperability testing per MIL-STD-188-164C, utilizing specialized equipment such as thermal and anechoic chambers. The selected provider will be responsible for delivering critical documentation, including First Article Testing reports and evidence for WGS certification. This effort is managed under the Department of Defense through agency W6QK Acc-Apg, with performance located in Abell. The solicitation is categorized under NAICS code 541380, with a response deadline set for December 10, 2026.

General Info

Agency

Department Of Defense → W6QK Acc-Apg

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Abell, MD, 21005, USA

Set-Aside

NONE

Documents

This scope was carved out of W15P7T-27-R-DIGIF.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Army Contracting Command - Aberdeen Proving Ground (ACC-APG)Capability Program Executive Command and Control Information Network (CPE C2IN) Commercial Solution Opening (CSO) Call for Solutions (CfS) for PdM WESS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 29

subcontract

Response DeadlineDec 10

Submission deadline

Response Deadline

12/10/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc-Apg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized testing for prime contractors on Army ACC-APG PdM WESS projects to verify DIFS military environment requirements. Conducts EMI testing per MIL-STD-461G, environmental testing per MIL-STD-810H, and interoperability testing per MIL-STD-188-164C using anechoic and thermal chambers. Delivers First Article Testing (FAT) reports and WGS certification evidence.

Similar Contracts

Same NAICS industry code

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract, titled First Article Testing and Validation Services, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves performing First Article Testing for prime contractors to ensure that initial production units meet strict close tolerance requirements and Navy-mandated safety specifications. Work is performed in San Diego and utilizes CMM and precision gauges to validate components before they are delivered for government approval. The selected contractor is responsible for providing comprehensive documentation and test results, culminating in the delivery of a First Article Test Report and an approved test unit. This effort falls under NAICS code 541380 and is critical for validating the quality and safety of supply contracts managed by DLA Weapons Support.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Aerospace Quality Compliance & Certification ServicesThe Aerospace Quality Compliance and Certification Services subcontract involves providing technical verification and quality documentation audits for prime contractors supporting DLA Weapons Support ASC projects. The primary scope of work includes validating technical data against the DLA Master List of Technical and Quality Requirements and verifying Critical Application Item certifications specifically for ITT Aerospace part number 57802M. The selected provider must possess specialized expertise in AS9100 standards and DLA R and I quality codes to deliver comprehensive quality certification reports and compliance documentation packages. This Department of Defense requirement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California. The project falls under NAICS code 541380. Interested parties should note the response deadline of November 6, 2026, for this specialized aerospace quality assurance engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract opportunity, issued by the Department of Defense for the DLA Weapons Support Aviation Supply Chain, involves performing First Article Testing (FAT) for internally relieved body bolts. The selected contractor will be responsible for validating the dimensions, material properties, and overall performance of a single sample unit against the technical data package. This process requires the use of Coordinate Measuring Machine (CMM) and material testing laboratory equipment to ensure full compliance. To qualify for Navy CSI validation, the contractor must hold AS9100 or ISO 9001 certification. The final deliverables for this project include a comprehensive FAT report and the return of the tested sample unit. This is a total small business set-aside under NAICS code 541380, with the place of performance located in Cherry Point. Responses are due by November 6, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves performing specialized testing and validation for prime contractors on DLA Troop Support aerospace projects. The scope of work requires the testing of three shoulder bolt units using metrology equipment to validate material properties and dimensions according to BAC drawings. The selected provider must apply sampling standards per MIL-STD-1916 or ASQ H1331, coordinate closely with the Quality Assurance Representative, and deliver a formal First Article Test Report. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. To be eligible for this contract, the provider must hold AS9100 certification. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

Aerospace Quality Inspection and SamplingThis subcontract opportunity, titled Aerospace Quality Inspection and Sampling, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves performing quality verification and sampling for prime contractors on aerospace projects, specifically executing sampling plans according to MIL-STD-1916 or ASQ H1331. The scope of work requires verifying critical, major, and minor attributes with AQLs of 0.1, 1.0, and 4.0, utilizing certified Measuring and Test Equipment for dimensional inspections and providing final inspection reports and certifications of conformance. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

First Article Testing (FAT) and Production Lot Testing (PLT)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, involves providing technical validation and testing services for prime contractors on US Navy aerospace projects. The scope of work focuses on conducting First Article Tests and Production Lot Tests using specialized rigs to ensure the structural and functional integrity of launch bar drive links. Because these components are classified as Navy Critical Safety Items, the contractor is responsible for delivering formal test reports and certifications of compliance. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties must adhere to the timeline established by the posting date of October 29, 2026, with a response deadline set for November 9, 2026. The primary deliverables for this engagement are the FAT Certification and the corresponding PLT Test Reports.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

First Article Testing and Quality CertificationThis subcontract for First Article Testing and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform inspections and certifications, specifically conducting First Article Testing according to PGN-09-01, preparing DD1222 forms for ESA submissions, and ensuring strict compliance with MIL-STD-129 and MIL-STD-2073-1E. Technical execution requires the use of precision gauges and Coordinate Measuring Machines to deliver certified inspection reports and First Article Test Reports. To qualify for this engagement, contractors must hold SAE AS9100 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. Responses are due by November 13, 2026, for performance located in the 17070-5002 zip code area.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract involves providing First Article Testing services for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The scope of work requires the testing of one unit of Lot/Item 4720 / 16505154 to ensure compliance with SQAP MIL-PRF-32107 specifications. The contractor must utilize laboratory equipment capable of validating air duct hose specifications and is responsible for delivering a formal FAT Certification and Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. The contractor is required to maintain communication with the Contracting Officer by providing written notice of all test schedules and final results. The solicitation period is open from October 29, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

Specialized Testing Services (FAT & PLT)This subcontract for Specialized Testing Services supports the DLA Weapons Support Land Supply Chain by providing First Article Test and Production Lot Test services for prime contractors. The scope of work involves validating ten initial units and all subsequent production lots in strict accordance with DI-NDTI-80809B standards. The contractor is responsible for coordinating witness testing with Government Quality Assurance Representatives and delivering all necessary signed reports and DD Form 1222/250 documentation. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 9, 2026, regarding this Department of Defense requirement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Production Lot Testing (PLT) for Adapter AssembliesThis subcontract involves performing Production Lot Testing for adapter assemblies to support prime contractors on DLA Weapons Support Maritime Supply Chain projects. The selected provider will execute quality and functionality validation tests in accordance with Quality Assurance Plan QAP 1TLH0 ICS3185-1, utilizing specialized laboratory equipment and testing rigs. The primary deliverable is a comprehensive test report and certification verifying that each production lot adheres to all required specifications. The project falls under NAICS code 541380 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, regarding this requirement posted on October 29, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg

Same awarding agency

Tactical Communications Systems Integration & SustainmentThe Tactical Communications Systems Integration and Sustainment subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, focuses on the enterprise-level integration of legacy contracts and modular capabilities for U.S. Army projects. The scope of work involves integrating niche component-level capabilities into the TCS enterprise, managing follow-on mechanisms for legacy contracts, and providing essential sustainment services for existing tactical communications equipment. Performance for this contract will take place at Aberdeen Proving Ground under NAICS code 541512. The selected provider will be responsible for delivering integrated enterprise communications systems and detailed sustainment reports. The solicitation was posted on October 29, 2026, with a response deadline of December 14, 2026.

Computer Systems Design Services

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Tactical Radio and Communications Hardware SupplyThis subcontract, titled Tactical Radio and Communications Hardware Supply, involves the manufacture of tactical communications hardware for prime contractors supporting U.S. Army projects. The scope of work focuses on the production of tactical radio solutions and the integration of Alternative Positioning, Navigation, and Timing capabilities into the hardware. To ensure operational security and functionality, the hardware must be compatible with modular software-security updates for both SBU-E and High Assurance product levels. Managed by the Department of Defense under agency W6QK Acc-Apg, the contract is categorized under NAICS code 334220. Performance will take place at Aberdeen Proving Ground. The solicitation was posted on October 29, 2026, with a response deadline set for December 14, 2026. The primary deliverables include the final tactical radio units and fully integrated ALT-PNT systems.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 2 months

PQC Compliance and Cryptographic Modernization ServicesThe PQC Compliance and Cryptographic Modernization Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, focuses on transitioning tactical communications equipment to post-quantum cryptography standards for U.S. Army prime contractors. The scope of work includes conducting PQC readiness assessments, developing machine-readable Cryptographic Bill of Materials, and executing detailed migration planning. Performance will take place at Aberdeen Proving Ground. Technical requirements are stringent, necessitating FIPS 140-3 Level 3 validation and NSA certification for High Assurance products utilizing ATLAS processes. The successful contractor is responsible for delivering PQC-compliant software modules along with all necessary certification documentation. This opportunity falls under NAICS code 541511, with a response deadline set for December 14, 2026.

Custom Computer Programming Services

POSTED

about 14 hours ago

DEADLINE

in about 2 months

Technical Manuals and New Equipment Training (NET)This subcontract opportunity with the Department of Defense, specifically under W6QK Acc-Apg, involves the development of technical documentation and training courseware for prime contractors supporting Army ACC-APG PdM WESS projects. The selected provider will be responsible for authoring Electronic Technical Manuals for operation and maintenance, creating New Equipment Training materials for operators, and generating a Technical Data Package in accordance with Army standards. The project deliverables include the completed ETM, NET courseware, and the final Technical Data Package. This requirement falls under NAICS code 611430 and is designated for performance in Abell. Interested parties must submit their responses by the deadline of December 10, 2026.

Professional and Management Development Training

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Global DIFS Installation and Integration SupportThe Global DIFS Installation and Integration Support subcontract involves providing specialized engineering and installation services for prime contractors supporting Army ACC-APG PdM WESS projects. The primary objective is to configure the DIFS baseline across more than 20 global Department of War Teleports, which includes integrating new hardware with existing host facility infrastructure and managing both legacy analog and digital interfaces. The scope of work encompasses comprehensive field verification and interoperability testing to ensure a fully operational DIFS baseline at all designated locations. Due to the nature of the sites, personnel are required to maintain site-specific security clearances. This effort is managed under the Department of Defense via the W6QK Acc-Apg agency, with a response deadline set for December 10, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Automated Management and Control Software SuiteThe Automated Management and Control Software Suite is a subcontract opportunity with the Department of Defense, specifically supporting Army ACC-APG PdM WESS projects. The primary objective is the design and development of a software management suite for prime contractors to automate DIFS operations. Key technical requirements include the implementation of communication path monitoring, automatic protection switching, and rerouting logic, as well as the development of built-in test capabilities for spectral purity analysis and EVM. The selected provider will be responsible for delivering the completed Management Software Suite along with all necessary RMF security artifacts. This project falls under NAICS code 541511 and will be performed in Abell. Interested parties must submit their responses by December 10, 2026.

Custom Computer Programming Services

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Digital IF Conversion Hardware DevelopmentThis subcontract for Digital IF Conversion Hardware Development supports prime contractors on Army ACC-APG PdM WESS projects. The scope of work involves the engineering, design, and manufacture of ADCs, DACs, and FPGA-based signal processing boards intended to convert analog L-band aggregate signals between 950 MHz and 2.050 GHz into DIFI-compliant Digital IF packet streams. The contractor is responsible for delivering FSED DIFS Hardware First Article and subsequent production units while ensuring all hardware meets strict MIL-STD-461G and MIL-STD-810H compliance standards. This Department of Defense initiative is categorized under NAICS code 334220 and will be performed in Abell.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Low-EMI LED Lighting SupplierThis small business set-aside subcontract, managed by the Department of Defense under agency W6QK Acc-Apg, requires the supply of two low-EMI internal LED lighting kits for prime contractors working on U.S. Army projects. The primary objective is to provide lighting solutions that do not emit significant electromagnetic interference, thereby preserving the integrity of the tent shielding. To achieve this, the supplier must utilize shielded lighting fixtures and low-EMI LED drivers that carry official low-EMI emission certifications. The opportunity was posted on October 29, 2026, with a response deadline of November 3, 2026. Classified under NAICS code 335121, the contract is specifically designated as a total small business set-aside. Performance for this requirement is associated with location 20310.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 14 hours ago

DEADLINE

Acoustic Voice Masking System ProviderThis subcontract opportunity, issued by the Department of Defense under agency W6QK Acc-Apg, seeks a provider to supply acoustic voice masking systems for prime contractors working on U.S. Army projects. The selected provider will deliver two systems utilizing sound masking emitters and acoustic generators designed to prevent voice eavesdropping and maintain privacy within shielded enclosures. All equipment must strictly adhere to established acoustic performance standards for voice masking. This is a total Small Business Set Aside under NAICS code 334310. The solicitation was posted on October 29, 2026, with a response deadline of November 3, 2026, at 3:30 PM. Performance for this contract is associated with location 20310.

Audio and Video Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

EMI/RFI Filtered Power Strip SupplierThis subcontract opportunity, issued by the Department of Defense under agency W6QK Acc-Apg, seeks a supplier to provide two filtered EMI/RFI power strip assemblies for prime contractors working on U.S. Army projects. The required power distribution units must effectively filter electromagnetic and radio frequency interference to maintain clean power for equipment housed within shielded enclosures. All delivered hardware must utilize EMI/RFI power filters and shielded power strips that comply with UL/CE electrical safety certifications. The procurement is designated as a total Small Business Set Aside under NAICS code 335311. Interested parties must submit their responses by November 3, 2026, at 3:30 PM. The performance of the contract is associated with location 20310.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Honeycomb Wave-Guide Ventilation SupplierThis subcontract opportunity, managed by the Department of Defense under agency W6QK Acc-Apg, seeks a supplier to provide two intake and exhaust ventilation fan assemblies for U.S. Army projects. The required assemblies must integrate industrial ventilation fans with honeycomb wave-guide filters specifically designed to maintain necessary airflow while blocking electromagnetic interference and radio frequency interference to meet strict attenuation standards. Classified as a total Small Business Set Aside under NAICS code 333412, the contract is intended for prime contractors operating on Army installations. Interested parties must submit their responses by November 3, 2026, at 3:30 PM. The performance of the contract is associated with location 20310.

Industrial and Commercial Fan and Blower Manufacturing

POSTED

about 14 hours ago

DEADLINE

EMI Shielded Inflatable Tent ManufacturerThis subcontract opportunity, issued by the Department of Defense under agency W6QK Acc-Apg, seeks a manufacturer to provide two inflatable EMI shielded tents for prime contractors working on U.S. Army projects. The required enclosures must measure 4ft x 4ft x 7ft and be constructed using conductive fabrics and high-pressure valves to prevent electromagnetic interference from entering or leaving the structure while ensuring total bladder and seam integrity. The procurement is designated as a Total Small Business Set Aside under NAICS code 314910. Interested parties must submit their responses by November 3, 2026, at 3:30 PM. Performance for this contract will take place in the 20310 zip code area.

Textile Bag and Canvas Mills

POSTED

about 14 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Independent Testing & Commissioning

FA5240 36 Cons Lgc

POSTED

about 14 hours ago

DEADLINE

Quality Testing and Certification Services

POSTED

about 14 hours ago

DEADLINE

Electromagnetic Compatibility (EMI) Testing for Naval Systems

POSTED

about 14 hours ago

DEADLINE

Environmental Qualification Testing (EQT) for Naval Shipboard Equipment

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) Validation

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

Fuel System Integrity Testing & Calibration

Base Miami Beach

POSTED

about 14 hours ago

DEADLINE

Quality Assurance, Inspection, and Testing Services

POSTED

about 14 hours ago

DEADLINE

Physical Testing and Analysis Services

W2SD Endist New York

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Chemical Testing and Analysis Services

W2SD Endist New York

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Biological Testing and Analysis Services

W2SD Endist New York

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Effluent Wastewater Testing - Saginaw VAMC

Solicitation # 36C25027Q0032

250-NETWORK Contract Office 10 (36C250)

POSTED

about 14 hours ago

DEADLINE

F103--D AND D LABORATORY STEAM & WATER TESTING

Solicitation # 36C24627Q0096

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS