Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Labeling

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires full compliance with MIL-STD-129 standards for the packaging, labeling, barcoding, and unique identification marking of lock washers destined for U.S. defense shipments. All materials must be prepared to meet rigorous military specifications, ensuring proper traceability, durability, and handling throughout the logistics chain. The work involves precise application of barcodes and U/I markings as mandated by federal defense guidelines, with strict attention to format, placement, and material integrity to avoid rejection upon receipt. The contract is classified as a subcontract under NAICS code 423820 and is issued by the ASC Commodities Division of the Department of Defense. Performance is designated to take place in Wilmington, with a zip code of 19808-5194. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026. Interested parties must submit proposals through the DIBBS platform using the provided link, and all deliverables must align with current military packaging and labeling regulations to satisfy contractual obligations.

General Info

Pack lock washers to MIL-STD-129 with barcodes and U/I markings for U.S. defense shipment in Wilmington.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

423820 - Farm and Garden Machinery and Equipment Merchant WholesalersView NAICS

Place of Performance

WILMINGTON, DE, 19808-5194, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-129 compliant packaging, labeling, barcoding, and U/I marking for defense shipment of lock washers.

Similar Contracts

Same NAICS industry code

Soup Warmer & Plate Dispenser Supply and IntegrationThe contract entails the supply and integration of two Hatco built-in soup warmers and two Atlas Metal plate dispensers into a newly constructed serving line at a Department of Defense facility in San Diego, California. The scope includes full electrical integration and necessary facility modifications to accommodate the equipment, ensuring seamless operation within the existing infrastructure. All components must be installed and functional according to technical specifications and safety requirements, with work performed on-site to meet operational readiness standards. The solicitation is classified as a subcontract under NAICS code 423820, with a response deadline of July 31, 2026, and was posted on July 25, 2026. Performance is required at the Navy Supply Systems Command Fleet Logistics Center in San Diego, with a ZIP code of 92136. While no specific set-aside details are provided, the contract is managed by the Department of Defense and is open for submissions from eligible subcontractors capable of delivering and installing commercial kitchen equipment with facility modifications. The work must align with military facility standards and timelines to support the service line’s deployment.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Commercial Kitchen Equipment Supply (Toasting & Pastry Equipment)The contract involves the supply of one new Toast-Qwik® conveyor toaster and one new Vollrath pastry display case, both required to be fully compliant with FDA, ETL, and NSF safety and sanitation standards. The equipment is intended for commercial kitchen use and must meet all applicable regulatory requirements for food service environments. The solicitation is classified as a subcontract under NAICS code 423820, with a response deadline of July 31, 2026, and was posted on July 25, 2026. Performance is to occur in San Diego, California, 92136, under the oversight of the Naval Supply Systems Command Fleet Logistics Center San Diego, a Department of Defense entity. No set-aside designation or specific point of contact is provided in the solicitation details.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Commercial Kitchen Equipment Supply (Refrigerated & Heated Cases)The contract involves the supply of five commercial self-service display cases—three refrigerated and two heated—all branded under Oasis® and newly manufactured to meet strict regulatory standards including NSF, ETL, and FDA requirements. These units are intended for use in a commercial kitchen environment and must be fully functional, compliant, and ready for immediate deployment without customization. The solicitation is issued as a subcontract under NAICS code 423820, indicating the procurement is aligned with wholesale trade of food products and related equipment. Performance of the contract is specifically required to take place in San Diego, with the delivering vendor responsible for ensuring timely and complete fulfillment at the designated location. The contract was posted on July 25, 2026, with a strict response deadline of July 31, 2026, at 7:00 PM, leaving a limited window for interested parties to submit proposals. The contracting activity is managed by the Naval Supply Systems Command Fleet Logistics Center in San Diego, under the Department of Defense, indicating this is a government-related procurement likely supporting military or federal facility operations. While no specific set-aside status or point of contact is provided, bidders must ensure full compliance with federal procurement obligations and deliver equipment that meets exact technical, safety, and regulatory benchmarks without exceptions.

Navsup Flt Logistics Ctr San Diego

POSTED

DEADLINE

Authorized Distributor for Brand-Restricted NSNsThe contract requires authorized distributors to supply mission-critical, brand-restricted National Stock Number (NSN) items that are subject to sole-source procurement rules under FAR 6.103-1(d), necessitating direct authorization from original equipment manufacturers to ensure compliance. Only distributors legally empowered by the OEMs may participate, ensuring the integrity and authenticity of components vital to federal operations. The solicitation is classified as a subcontract under NAICS code 423820, targeting qualified entities capable of meeting stringent supply chain demands for defense and government systems. Performance is designated for Vista, California, with a response deadline of July 31, 2026, and the contract is administered by the General Services Administration’s Supply Chain Management Contracting Division. While no set-aside provisions or point of contact information are provided, the requirement for OEM authorization creates a highly restricted pool of eligible bidders, emphasizing strict adherence to procurement regulations and proven supply chain reliability. All participants must demonstrate verified credentials and ongoing compliance with brand restrictions to qualify.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

DEADLINE

Military-Compliant Packaging, Preservation, and PalletizationThe contract requires comprehensive packaging, preservation, and palletization of filter kits in full compliance with MIL-STD-2073-1E Appendix D, MIL-STD-129, and DLA RP001 standards, ensuring all items are protected against environmental factors through climate control, proper cushioning, and precise unit packing. All work must adhere to rigorous military specifications to maintain product integrity during storage and transportation, with specific attention to labeling, marking, and documentation requirements outlined in the referenced standards. The effort encompasses the full lifecycle of packaging from initial preparation through final palletization, ensuring readiness for military logistics systems. This is a subcontract issued under NAICS code 423820, with a response deadline of August 3, 2026, and performance located at Tracy, California, 95304-5000. The contracting office is the Department of Defense’s Land Supply Chain ESOC Buys, and the work is tied to defense supply chain operations requiring strict adherence to federal military packaging protocols. All participants must be prepared to meet exacting quality control benchmarks, maintain detailed records, and ensure seamless integration with existing DoD supply and distribution infrastructure.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThe contract requires the provision of fully compliant packaging, labeling, and bar-coding services for 15 pressure switch units in accordance with MIL-STD-129 and RP001 standards, ensuring alignment with Department of Defense logistics requirements. All items must feature hazard labeling as necessitated by safety regulations and include a data matrix code for accurate tracking throughout the DoD supply chain. The work is classified as a subcontract under NAICS code 423820 and is scoped for performance at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Responses to this solicitation are due by August 3, 2026, and the opportunity was posted on July 23, 2026, under the Electrical Devices Division of the Department of Defense. The contract aims to support defense logistics through precise, standardized packaging and labeling that enables seamless integration into military inventory and distribution systems.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging and labeling services that strictly comply with MIL-STD-129 and all Department of Defense Logistics Agency procedural standards for shipments destined to DLA Distribution in New Cumberland, Pennsylvania. All work must adhere to military-grade specifications for marking, labeling, and containment to ensure consistent, traceable, and secure handling of government-owned materiel throughout the supply chain. The deliverables are subject to rigorous quality control and must support automated scanning and logistics tracking systems used by DLA. This is a subcontract opportunity under NAICS code 423820, posted on July 23, 2026, with a response deadline of August 3, 2026. The contract is issued by the Land Supply Chain ESOC BuyS team under the Department of Defense, and all performance must occur at the specified location in New Cumberland, PA with a ZIP code of 17070-5002. Contractors must be prepared to meet exacting federal military packaging requirements with full documentation and audit readiness, ensuring seamless integration into DLA's distribution network without delays or noncompliance penalties.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of Export-Controlled or Regulated MaterialsThe contract involves the supply of raw materials or subcomponents that are subject to export control regulations, specifically mandating compliance with DFARS 252.225-7048, which requires detailed origin documentation and rigorous tracking of compliance throughout the supply chain. All vendors must ensure that materials are sourced and documented in accordance with U.S. government export control requirements, providing verifiable evidence of country of origin and adherence to restricted end-use provisions. This imposes strict obligations on subcontractors to maintain accurate records and implement internal controls to prevent unauthorized transfers or misuse of regulated items. The contract is issued under NAICS code 423820 by the ACTIVE DEVICES DIVISION within the Department of Defense, with performance expected at Tracy, California, 95304-5000. It is structured as a subcontract and has a response deadline of August 3, 2026, with the solicitation posted on July 23, 2026. No set-aside classification is indicated, and bidders must align with federal regulations governing defense-related supply chains, particularly those involving controlled technologies and materials. Failure to meet documentation or compliance requirements will result in rejection or contract termination.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and LabelingThe contract requires full compliance with MIL-STD-129 for packaging, preservation, palletization, and barcoded labeling to support Department of Defense logistics tracking systems, ensuring all items are properly identified and traceable throughout the supply chain. All packaging and labeling must meet strict military standards for durability, clarity, and compatibility with automated scanning systems in operational environments. The contract also permits the handling of hazardous materials in accordance with FED-STD-313, necessitating specialized procedures for containment, labeling, and documentation to ensure safety and regulatory adherence during transportation and storage. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of August 3, 2026. The NAICS code 423820 identifies this as a wholesale trade activity related to durable goods merchant wholesalers, indicating the contractor will function as a logistics and packaging intermediary rather than a manufacturer. This is a subcontract opportunity under the LSO Combat Vehicles and Armament office of the Department of Defense, with no set-aside classification specified, meaning all qualified businesses may compete regardless of size or certification status.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Packaging and Kitting ServicesThe contract awards packaging and kitting services for military-standard couplings to be prepared for shipment to the Defense Logistics Agency warehouse, requiring full compliance with military packaging specifications including kitting, palletization, and precise marking procedures. All work must be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and is structured as a subcontract under a Total Small Business Set-Aside, exclusively open to small businesses as defined by the SBA. The North American Industry Classification System code is 423820, indicating wholesale trade in hardware and plumbing and heating equipment and supplies, and the solicitation is managed by the Fluid Handling Division within the Department of Defense. The opportunity was posted on July 23, 2026, and responses must be submitted no later than August 3, 2026, with no solicitation number provided on the document. The work demands strict adherence to defense-grade standards for handling, packing, and labeling couplings to ensure logistical compatibility and readiness upon arrival at the DLA warehouse. Potential bidders must be prepared to meet all regulatory, quality, and delivery requirements associated with military supply chain operations, and the contract does not include details on estimated value, delivery timelines beyond shipment destination, or specific coupling types, leaving those details subject to further contractual agreements or technical specifications provided to selected offerors.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Packaging and Marking ServicesThe contract requires specialized packaging and labeling services for fluid filter elements in full compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling standards, ensuring all items meet rigorous Department of Defense specifications. This includes the fabrication and installation of die-cut cushioning materials, proper preparation of containers, and precise application of special handling codes such as ZZ: ARROW UP to indicate correct orientation during storage and transport. All work must align with DLA requirements to guarantee operational readiness and logistics compatibility across military supply chains. The services are to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, and fall under NAICS code 423820 for wholesale trade of industrial equipment. This is a subcontract opportunity posted on July 23, 2026, with responses due by August 3, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. Participation requires strict adherence to federal military standards and delivery timelines to support defense logistics operations.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Defense-Compliant Packaging and Palletization ServicesThe contract requires commercial packaging and palletization services for non-hazardous aircraft components, with strict adherence to ASTM D3951 and DLA RP001 packaging standards to ensure defense-grade protection, handling, and shipment compliance. All work must be performed at the designated place of performance, Tinker Air Force Base, Oklahoma, with ZIP code 73145-8000, and is classified as a subcontract under NAICS code 423820, indicating it falls within wholesale trade of motor vehicle parts and supplies, though applied here for defense logistics support. The solicitation was posted on July 23, 2026, with a response deadline of July 31, 2026, and the contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, indicating this is part of a broader military supply chain effort requiring certified, reliable packaging practices for sensitive aerospace assets.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

CABLE ASSEMBLY, SPECIALThe contract is for the procurement of 10 units of a special purpose electrical cable assembly identified by NSN 5995017277502 and part number SFV.L01.47 from Atlantic Signal LLC, under solicitation SPE4A6-26-T-09SX, issued by the Department of Defense’s ASC Commodities Division. The total contract value is $100.00 at $10.000 per unit, with delivery required within 150 days of award, targeting a final delivery date of April 29, 2027, originally needing shipment by January 1, 2027. Deliveries must be FOB origin and inspected and accepted at the destination, specifically the DLA Distribution’s New Cumberland, Pennsylvania facility, with no tolerance for quantity variance. The cable assembly must comply with technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and adhere to stringent packaging standards under MIL-STD-2073-1E with preservation method 10 (cleaning and drying, level one) using no preservative material. All items must be marked according to MIL-STD-129, including bar coding, with no special marking required under code 00-00, and physical identification of bare items per RQ017. Palletization follows DLA’s RP001 packaging requirements. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, using a zero-based approach where no non-conformances are permitted in the sample lot unless otherwise specified. Attributes are classified as critical, major, or minor, with corresponding verification levels and AQLs of 0.1, 1.0, and 4.0 respectively; any unspecified attributes are treated as major. The contract includes compliance with numerous Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses covering equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous materials identification, cybersecurity safeguarding (NIST SP 800-171, DFARS 252.204-7012), prohibition of hexavalent chromium, and restrictions on covered telecommunications equipment. Invoicing is mandated through WAWF with no paper submissions accepted, and contractors must register and comply with

Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

PIN-RIVETThe item specified is a threaded pin-rivet with NSN 5320-00-869-1498, with a total quantity of 36,805 units required under solicitation SPE4A6-26-T-09QW, which is a total small business set-aside classified under NAICS code 332510. The contract is issued by the Department of Defense through the ASC Commodities Division, with performance delivery expected at Cherry Point, North Carolina, within 275 days after delivery order. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the primary point of contact is Summer Allen, reachable via email and phone provided. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign national employees and overseas subsidiaries of U.S. firms. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA to handle such data. DFARS 252.225-7048 governs the handling and safeguarding of this information, and all contractors must comply with these requirements to be eligible for award or performance under this contract.

Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

SPACER, BALLThe contract is for the procurement of 186 units of a spacer, ball item with NSN 1440-00-961-5057 and part number 29-13703-3, sourced under solicitation SPE4A6-26-T-09RU. Delivery is required FOB origin within 117 days from the contract award, with a mandatory ship date of November 29, 2026, and an original delivery deadline of December 4, 2027. The item is designated as a critical application and must comply with all DLA Master List of Technical and Quality Requirements referenced by R-numbers, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and no government identification may be removed from non-accepted supplies. Unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at destination. Quality assurance is governed by tailored and non-tailored higher-level requirements, including ISO 9001:2015 for both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment must meet RT001 specifications. The item does not require Unique Identification per DFARS 252.211-7003(c)(1)(i). All packaging must be marked and labeled per MIL-STD-129 and delivered to the designated receiving facility in Tracy, CA, with transportation logistics governed by DLAD procedural notes C19 and C20. The solicitation was issued July 26, 2026, with responses due by August 3, 2026, under the NAICS code 334419, and is managed by the Department of Defense’s ASC Commodities Division.

Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

SCREW, MACHINEThe contract pertains to the procurement of 10 machine screws with NSN 5305-01-057-0304 under solicitation SPE4A6-26-T-09RL, issued by the Defense Logistics Agency’s ASC Commodities Division. Technical data for this item is not currently available in an approved package due to proprietary or insufficient information, precluding competitive procurement. The requirement incorporates referenced technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with version control determined by the solicitation issue or award date depending on acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including U.S. subsidiaries, and require compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training, and explicit authorization. Packaging must meet DLA standards and inspection and acceptance occur at the manufacturer’s origin. Item unique identification is not required as per customer directive, and government markings must be removed from rejected items. The delivery schedule requires fulfillment within 923 days after order placement, with performance occurring at Robins Air Force Base, Georgia. The solicitation closes on August 3, 2026, and is subject to cybersecurity maturity certification level 2 compliance for third-party assessors.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

SCREW, CAP, HEXAGON HThe contract specifies the procurement of 20 units of a hexagon cap screw, identified by NSN 5305-01-657-6697 and McMaster-Carr part number 92965A581, under solicitation SPE4A6-26-T-09RJ. Delivery is required within five days of award, FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 33, dry climate control, and unit packaging coded as BV with intermediate container E5; marking must follow MIL-STD-129 with no special marking required. The product must be palletized per DLA packaging requirements, and shipping must use the fastest traceable means, excluding parcel post. The delivery address is Bldg 810 Dive Locker in Birmingham, AL, with a mandatory government use designation and specific tracking identifiers. The technical and quality requirements referenced throughout the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The contract enforces strict compliance with DoD unit of issue standards and incorporates additional requirements including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Dana Barefoot, and the solicitation response deadline is August 3, 2026, with an original required delivery date of July 17, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

SCREW, MACHINEThis contract pertains to the procurement of machine screws identified by part number JWA82272 and NSN 5305-01-616-2120, with a unit of issue defined as a package containing 31 screws. A total of 39 packages are required, to be delivered FOB origin within 111 days, with no tolerance for quantity variance. Acceptance and inspection both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container details. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. The screws must not contain or come into direct contact with mercury or mercury compounds except for specified functional uses such as batteries, lighting, sensors, or naval instrumentation, with additional containment requirements for portable devices. Sampling and quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with attributes assigned strict acceptance levels unless otherwise indicated. Documentation for source approval, removal of government identification from non-accepted items, and material compliance are all governed by referenced DLA master requirements. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for November 23, 2026, under solicitation SPE4A6-26-T-09SG.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

CAM, CONTROLThis contract pertains to the procurement of 13 units of Hamilton Sundstrand Corporation part number 772028, identified by NSN 3040-01-478-2006, under solicitation SPE4A6-26-T-09RD. Delivery is required within 166 days of award, with FOB origin terms and inspection and acceptance occurring at the destination point in San Diego, California. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized accordingly. While Unit Unique Identification is not mandated, the item is classified as a Critical Application Item requiring high reliability. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and any covered defense information is subject to applicable controls. The unit of issue is each (EA), with no tolerance allowed for quantity variance. The delivery deadline is set for August 29, 2027, though an earlier ship date of January 17, 2027 is requested. All documentation and compliance obligations are governed by DLA’s official requirements and referenced standards.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE