Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Labeling Services

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of UV-protective packaging, labeling, and marking services for gaskets in full compliance with U.S. military standards MIL-STD-2073-1E, MIL-DTL-117, and MIL-STD-129, specifically for shipments managed by the Defense Logistics Agency. All packaging must ensure the integrity and protection of gaskets against ultraviolet radiation damage during storage and transit, while labeling and marking must adhere strictly to federal military specifications for traceability, identification, and handling. The work is to be performed for delivery to the designated place of performance in Tracy, California, with a zip code of 95304-5000. The contract is classified as a subcontract under NAICS code 493190, indicating it falls within the Other Warehousing and Storage category, and is issued by the Department of Defense under the Land Supplier Operations Vehicle Support agency. Responses are due by August 7, 2026, with the solicitation posted on July 31, 2026. The awarding agency requires precise adherence to military packaging regulations, and noncompliance may render shipments unacceptable for DLA distribution. All work must support seamless integration into military supply chains with strict documentation and quality control requirements.

General Info

Provide UV-protective packaging and military-compliant labeling for gaskets in Tracy, CA, per DLA and MIL-STD requirements.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

493190 - Other Warehousing and StorageView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide UV-protective packaging, labeling, and marking of gaskets in compliance with MIL-STD-2073-1E, MIL-DTL-117, and MIL-STD-129 for DLA shipment.

Similar Contracts

Same NAICS industry code

Logistics and Distribution of Pre-Qualified SealersThe contract involves the logistics, warehousing, kitting, and just-in-time delivery of pre-approved joint sealers to Texas Department of Transportation project sites throughout the state, with a primary focus on the Lubbock District. The successful bidder will be responsible for maintaining inventory, preparing kits according to project specifications, and ensuring timely delivery to support ongoing road and bridge maintenance operations. All sealers must be pre-qualified by TxDOT and delivered on a schedule that aligns with field work timelines to minimize project delays. This is a subcontract opportunity classified under NAICS code 493190, with responses due by August 7, 2026. The work is tied directly to TxDOT’s infrastructure needs and requires a robust distribution network capable of handling statewide logistics while meeting strict quality and timing standards. Providers must demonstrate experience in handling specialized construction materials and the ability to operate efficiently within TxDOT’s operational framework, particularly in the Lubbock region where demand is concentrated. All activities must be performed in compliance with TxDOT’s requirements for material handling, documentation, and delivery protocols.

Texas Department Of Transportation

POSTED

DEADLINE

Inventory, Logistics, and Just-in-Time Delivery ServicesPhiladelphia Gas Works is seeking a contractor to provide comprehensive inventory management, kitting, and just-in-time delivery services for parts required at its facilities across Pennsylvania. The work involves maintaining a ready supply of components, organizing them into kits as needed, and ensuring rapid response to urgent requests, potentially under a vendor-managed inventory model where the supplier assumes responsibility for monitoring stock levels and triggering replenishment. The contract is structured as a subcontract and falls under NAICS code 493190, indicating it is classified under other warehousing and storage services. Bids must be submitted by August 14, 2026, with the solicitation posted on July 31, 2026, indicating a two-week window for proposals. All performance is expected to occur at PGW sites within Pennsylvania, and the contractor must be prepared to operate with high reliability and speed to support critical utility operations.

Philadelphia Gas Works

POSTED

DEADLINE

Military Packaging, Marking, and Preservation ServicesThe contract requires the packaging, marking, and preservation of manufactured adapters in strict adherence to Department of Defense and Defense Logistics Agency standards, ensuring all items meet military-grade requirements for durability, traceability, and readiness during storage and transit. This includes comprehensive labeling with standardized military markings, application of barcodes for logistics tracking, and implementation of approved preservation techniques to protect components from environmental damage prior to shipment. All work must be performed at the designated place of performance in Cherry Point, North Carolina, with the final products prepared for secure and efficient distribution through military supply chains. This is a subcontract opportunity governed under NAICS code 493190, with a response deadline of August 15, 2026, and an issuance date of July 31, 2026. The contracting activity falls under the Active Devices Division of the Department of Defense, and while no set-aside provisions are specified, compliance with federal military packaging regulations is mandatory. Successful offerors must demonstrate expertise in military logistics processes and the ability to meet exacting standards for item identification, handling, and documentation to support defense readiness objectives.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Specialized Packaging and Marking ServicesThe contract involves specialized packaging and marking services for finished cable assemblies, requiring strict adherence to MIL-STD-2073-1E for packaging standards and MIL-STD-129 for labeling requirements. All packaging must include barcodes, CAGE codes, lot and serial numbers, and proper FOB origin coordination to ensure full compliance with military logistics protocols. The work is classified as a subcontract under NAICS code 493190 and is solicited by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, and performance will be conducted in accordance with federal defense supply chain expectations, though specific performance location details are not provided. Interested parties must submit proposals through the designated DIBBS portal prior to the deadline.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Packaging, Marking, and Logistics for DeliveryThe contract requires the packaging and marking of wing panels in strict accordance with MIL-STD-129 standards, ensuring all items are properly labeled with 2D Data Matrix barcodes and clearly identified by NSN and part number. Logistics preparation must align with FOB Origin and Destination requirements to facilitate seamless delivery and tracking throughout the supply chain. The work is categorized as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to respond, as defined by the SBA and FAR 19.5. The North American Industry Classification System code 493190 indicates the work falls under Other Transportation Support Activities, reflecting the focus on logistics and packaging support rather than manufacturing. The solicitation is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV with a response deadline of August 28, 2026, and was posted on July 31, 2026, providing interested parties approximately four weeks to prepare and submit proposals.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Packaging, Preservation, and Labeling ServicesThe contract requires the provision of packaging, preservation, and labeling services for mounting plates, ensuring full compliance with MIL-STD-129 for labeling standards and RP001 for palletization requirements. All shipments, whether hazardous or non-hazardous, must be properly packaged to meet applicable transportation and safety regulations, securing the integrity of the cargo during handling and transit. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and must be completed in alignment with Department of Defense logistics protocols as specified under the NAICS code 493190. This is a subcontract opportunity issued by the Land Supply Chain under the Department of Defense, with responses due by August 7, 2026, and the solicitation was posted on July 31, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Packaging, Labeling, and Palletization Services for Military ShipmentThe contract requires specialized preservation, packaging, labeling, and palletization services for indicating panels in full compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness for transport and storage. All work must be performed to meet strict federal specifications for durability, identification, and handling procedures, with final delivery designated as FOB Origin, meaning the contractor assumes responsibility until the goods are loaded at the designated point of shipment. The services are critical to supporting military logistics and must be executed with precision to maintain supply chain integrity. This subcontract, issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, is solicited with a response deadline of August 5, 2026, and the performance location is tied to Cherry Point, North Carolina, with ZIP code 28533-5040. Although no set-aside designation is specified, participation is open to qualified vendors capable of delivering compliant solutions under tight federal guidelines. The solicitation is managed through the DIBBS platform, and timely submission is essential to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Preservation Services for Defense LogisticsThe contract calls for comprehensive packaging, preservation, and marking services for wiring harnesses in strict compliance with Defense Logistics Agency guidelines and MIL-STD-129 requirements to guarantee the integrity and readiness of shipments for military use. All work must adhere to standardized procedures ensuring durable protection against environmental and physical damage during transit and storage, with precise labeling and documentation to support traceability and logistics operations across the defense supply chain. This subcontract opportunity, issued by the ASC Commodities Division under the Department of Defense, is classified under NAICS code 493190 and is open for responses until August 18, 2026. The performance location and specific delivery details are not specified, but successful bidders must be prepared to meet rigorous military standards for packaging and preservation without exception. The project emphasizes reliability and compliance over cost, targeting experienced service providers capable of handling sensitive defense components with proven expertise in federal supply chain protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Marking, and Shipment ComplianceThe contract requires strict adherence to MIL-STD-129 and DLA shipping standards for the proper packaging, labeling, and staging of surplus batteries, ensuring full compliance with Department of Defense logistical protocols. All activities must be executed in accordance with established military specifications to guarantee safe handling, accurate identification, and seamless integration into defense supply chains. This subcontract is focused exclusively on the preparation and pre-shipment processes, with no authority or responsibility extending beyond the documented packaging and marking requirements. The solicitation, identified under procurement code SPE7L726Q2102, was posted on July 31, 2026, with responses due by August 10, 2026. The North American Industry Classification System code 493190 indicates the scope falls under Other Support Activities for Transportation, reflecting the critical nature of logistics support rather than manufacturing or distribution. The contracting office is the Office of the Competition Advocate Building under the Department of Defense, and the place of performance is not specified, implying flexibility in location as long as compliance with federal shipping standards is maintained throughout the process.

OFFICE OF THE COMPETITION ADVOCATE BUILDING

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires the provision of packaging and marking services strictly aligned with MIL-STD-129 standards to ensure accurate identification, safe handling, and proper shipment of parts destined for DLA locations. All work must meet military specifications for labeling, labeling placement, containerization, and documentation to guarantee compliance during transit and receipt at federal supply chain nodes. The service scope centers on logistics readiness and interoperability within Department of Defense supply networks, emphasizing traceability and uniformity across all packaged items. This is a subcontract opportunity with a NAICS code of 493190, issued under the Aviation Supply Chain division of the Department of Defense. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026. Performance is required to be conducted at Tracy, California, with a zip code of 95304-5000. The contract does not specify a set-aside classification or unique point of contact, and all submissions must be made through the DIBBS system using the provided UI link. Suppliers must be prepared to demonstrate capability in military-compliant packaging processes and full adherence to federal shipment protocols.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Packaging and Preservation ServicesThe contract encompasses the packaging and preservation of delivered items in accordance with military standards, requiring complete cleaning and drying per PRES MTHD:10 procedures, application of bar-coded labeling for traceability, and proper containerization to ensure integrity during transport and storage. All work must strictly adhere to defense specifications to meet operational readiness requirements, with performance centralized at Cherry Point, North Carolina, under the jurisdiction of the Department of Defense. This subcontract, posted on July 31, 2026 and with a response deadline of August 8, 2026, is categorized under NAICS code 493190, indicating nonhazardous waste treatment and disposal services, though the actual work pertains to military logistics and protective packaging. The solicitation does not specify a set-aside type or organization type, and no point of contact details are provided, leaving potential bidders to navigate the process through the official DIBBS portal link. The primary focus is on compliance with standardized military preservation protocols to support equipment sustainment missions.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires the provision of packaging, labeling, and palletization services strictly aligned with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards for military shipments, ensuring full compliance with Department of Defense regulations for physical handling and identification of materiel. All work must be executed to meet rigorous military specifications for durability, traceability, and readiness in logistics operations, with the place of performance located at 17070-5002 in New Cumberland. The contract is classified as a subcontract under NAICS code 493190 and is being managed by the Aviation Supply Chain within the Department of Defense. Offers must be submitted by the response deadline of August 5, 2026, at 5:00 PM, following the solicitation process initiated on July 31, 2026. While no set-aside type is specified, all prospective vendors must be prepared to demonstrate capability in military-grade packaging systems, proper use of standardized markings, and adherence to palletization protocols required for air, land, and sea transport. The solicitation details are accessible via the DIBBS portal at the provided URL, and performance must support the end-to-end readiness and distribution of military supplies without deviation from established technical and procedural mandates.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NIST SP 800-171 Cybersecurity Compliance SupportThe contract requires implementation and documentation of all NIST SP 800-171 security controls to safeguard Covered Defense Information, ensuring full alignment with federal cybersecurity standards for defense contractors. This includes establishing technical, administrative, and physical safeguards across systems and processes that handle CDI, as well as maintaining comprehensive records to demonstrate compliance. A mandatory self-assessment of the implemented controls must be conducted and the results submitted to the Supplier Performance Risk System, with accurate and timely reporting critical to maintaining contract eligibility. Any cybersecurity incident affecting CDI must be reported to the appropriate authorities no later than 72 hours after detection, with procedures in place to detect, respond to, and document such events. The work is performed under a subcontract for the Department of Defense, with the primary place of performance located in New Cumberland, Pennsylvania, under the NAICS code 541512 for computer systems design services. Submission of proposals must occur by the deadline of August 5, 2026, following the solicitation issued on July 31, 2026.

Computer Systems Design Services

POSTED

DEADLINE

Military-Grade Packaging and PalletizationThe contract requires the packaging and palletization of materials in strict accordance with DLA RP001, MIL-STD-129, and ASTM D3951 standards to ensure full compliance with military preservation, marking, and load certification requirements. All work must meet the rigorous specifications for military-grade packaging, including proper material handling, labeling, and structural integrity to support safe transportation and long-term storage under operational conditions. The task involves precise adherence to military protocols for identification, containment, and securing of items on pallets to guarantee readiness and logistical compatibility within the Defense Logistics Agency’s supply chain. The solicitation is categorized as a subcontract under NAICS code 561990 and is issued by the Department of Defense under the organization Land Supplier Opns Vehicle Spt. Performance is required at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The response deadline is August 5, 2026, and the posting date was July 31, 2026, indicating a five-day window for submissions. All potential subcontractors must be prepared to demonstrate proven capability in military packaging compliance, with an emphasis on accuracy, quality control, and adherence to federal defense standards. No set-aside designation is specified, and the contract is accessible via the DIBBS platform for detailed procurement information.

All Other Support Services

POSTED

DEADLINE

Safety Data Sheets (SDS) Development and ManagementThe contract requires the development, maintenance, and annual updates of Safety Data Sheets for hazardous materials in full compliance with the Globally Harmonized System of Classification and Labelling of Chemicals and the Defense Federal Acquisition Regulation Supplement clause 252.223-7001. All SDS must be accurately prepared, properly formatted, and promptly submitted to relevant authorities with timely notifications for any changes or revisions. The work must be performed to support defense logistics operations, with performance centered at New Cumberland, Pennsylvania, 17070-5002, ensuring all documentation meets stringent federal and international safety standards. This is a subcontract under NAICS code 541620, aimed at providing scientific and technical consulting services related to chemical safety compliance. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense through the Land Supplier Operations Vehicle Support organization. Contractors must ensure all deliverables align with DOD regulatory requirements and are delivered in a manner that supports operational readiness and regulatory accountability across the supply chain.

Environmental Consulting Services

POSTED

DEADLINE

Hazardous Materials Compliance Labeling and PackagingThe contract requires the preparation, labeling, and packaging of hazardous materials in strict accordance with MIL-STD-129, FED-STD-313, OSHA 29 CFR 1910.1200, and DLA RP001, ensuring full compliance with military and federal safety and identification standards. Tasks include accurate hazard labeling, bar-coding, and proper unit markings to support safe handling, storage, and transportation of dangerous goods. All work must be completed to meet the rigorous specifications outlined by these regulations, with emphasis on clarity, durability, and consistency in documentation and physical labeling. This is a subcontract under the NAICS code 562910, with a response deadline of August 5, 2026, and a posted date of July 31, 2026. Performance is expected to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The overseeing agency is the Department of Defense under the office name LAND SUPPLIER OPNS VEHICLE SPT. The contract is not subject to any specified set-aside classification and can be accessed through the DIBBS portal using the provided reference link.

Remediation Services

POSTED

DEADLINE

Supply Chain Compliance and ReportingThe contract seeks to support supply chain due diligence and compliance with DFARS and FAR clauses concerning material restrictions and telecommunications, ensuring that all components and systems meet federal security and sourcing requirements. The work involves verifying the origin and integrity of materials, monitoring for restricted or counterfeit components, and maintaining documentation to demonstrate adherence to regulations that safeguard national security interests in defense-related supply chains. The focus is on telecommunications infrastructure and critical hardware where vulnerabilities could compromise operational readiness or data security. This is a subcontract under the NAICS code 541611, with a performance location in New Cumberland, Pennsylvania, 17070-5002, and responses are due by August 7, 2026. The contract is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office. While no specific set-aside status is indicated, the requirement carries strict compliance obligations tied to federal acquisition regulations and defense supply chain integrity. Interested parties must prepare detailed compliance plans, reporting mechanisms, and evidence of supply chain transparency to meet the stringent criteria outlined in the solicitation.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Technical Data and Configuration ManagementThe contract requires engineering support for configuration control activities including the management of engineering change proposals and variance requests under RQ002, focusing on technical data and configuration management within the Department of Defense. The work is tied to a subcontract under NAICS code 541330 and is performance-based at New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating a specific geographic location for the delivery of services. The solicitation was posted on July 31, 2026, and responses are due by August 7, 2026, with no set-aside designation specified, meaning it is open to general industry competition. The contract is administered under the Land Supplier Operations Vehicle Support organization and can be accessed through the DIBBS system via the provided link.

Engineering Services

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks third-party inspection and quality verification services for seal kits to ensure complete compliance with MIL-STD-1916 and RQ001 standards, requiring zero non-conformances throughout the inspection process. The work is focused on rigorous quality assurance to confirm that all seal kits meet military-grade specifications for performance, durability, and reliability under operational conditions, with inspections conducted independently by qualified external providers. The solicitation, designated under NAICS code 541380 for other professional, scientific, and technical services, is issued as a subcontract by the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT. The place of performance is located in New Cumberland, Pennsylvania, with a response deadline of August 7, 2026, and the posting date set for July 31, 2026. All inspections must align with strict government quality protocols, and vendors are expected to deliver verifiable documentation demonstrating full adherence to the referenced standards without exception.

Testing Laboratories and Services

POSTED

DEADLINE

Seal Kit Manufacturing and AssemblyThe contract requires the manufacture, assembly, and packaging of 124,000 military-grade seal kits identified by NSN 5330-01-178-6210, with full adherence to military quality and preservation specifications to ensure battlefield readiness and longevity under extreme conditions. All work must meet stringent defense standards for material integrity, dimensional accuracy, and environmental resistance, with final products subjected to rigorous inspection protocols prior to delivery. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 332999 for other fabricated metal product manufacturing. This is a subcontract solicitation issued by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization, with a response deadline of August 7, 2026, and a posting date of July 31, 2026. The contract does not specify a set-aside type and has no designated point of contact listed. Bidders must ensure compliance with all federal defense procurement requirements, including documentation for traceability, packaging per MIL-STD specifications, and secure handling procedures. The official solicitation can be accessed via the DIBBS portal at the provided web link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Controlled Unclassified Information (CUI) Handling and Cybersecurity ComplianceThe contract requires the implementation and ongoing maintenance of cybersecurity safeguards to protect controlled unclassified information (CUI) in accordance with Defense Federal Acquisition Regulation Supplement (DFARS), NIST Special Publication 800-171, and the Cybersecurity Maturity Model Certification (CMMC) framework. The subcontractor must ensure full compliance with these standards to secure covered defense information throughout its lifecycle, including administrative, technical, and physical controls to mitigate risks associated with unauthorized access, disclosure, or compromise. The work is scoped to meet the rigor of CMMC Level 2 or equivalent requirements, emphasizing continuous monitoring, incident response, system hardening, and personnel training aligned with federal cybersecurity mandates. Performance of the contract is designated to occur at Tracy, California, with an estimated delivery and compliance timeline tied to a response deadline of August 7, 2026. The contract falls under NAICS code 541512 for computer systems design services and is issued under the Department of Defense’s Land Supplier Operations Vehicle Support organization. While no set-aside classification is specified, the subcontractor must demonstrate adequate cybersecurity infrastructure, documentation, and audit readiness, including the ability to undergo third-party assessments if required by CMMC certification. All systems and processes must be configured, tested, and maintained to ensure uninterrupted compliance with evolving federal cybersecurity obligations.

Computer Systems Design Services

POSTED

DEADLINE

Quality Assurance and Product Verification Testing (PVT)The contract mandates independent inspection and testing to verify the composition of gasket materials, their packaging integrity, and full compliance with applicable military specifications under the Federal Acquisition Regulation clauses 52.246-2 and 52.246-3, alongside prescribed Product Verification Testing requirements. The work is focused on ensuring material authenticity and adherence to standardized military performance criteria, with testing conducted by qualified third parties to maintain objectivity and regulatory alignment. This subcontract, classified under NAICS code 541380, is issued by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT organization, with performance required at Tracy, California, zip code 95304-5000. Bidders must respond by August 7, 2026, and the solicitation is open for subcontractors capable of delivering certified inspection and testing services. The contract does not specify a set-aside designation and does not include a designated point of contact, requiring interested parties to reference the official DIBBS portal for full details and submission protocols.

Testing Laboratories and Services

POSTED

DEADLINE

Gasket Manufacturing and Supply (NSN 5330-01-271-4308)The contract calls for the manufacture and delivery of 93,000 military-specification gaskets designated by NSN 5330-01-271-4308, all of which must be asbestos-free and engineered to withstand UV exposure without degradation. The gaskets are required to be packaged in strict accordance with Defense Logistics Agency standards to ensure uniformity, traceability, and readiness for military use. Production must comply with the NAICS code 332994, indicating focus on other fabricated metal product manufacturing, and the delivery location is specified as Tracy, California, with a zip code of 95304-5000. The opportunity is structured as a subcontract and was posted on July 31, 2026, with responses due by August 7, 2026, under the oversight of the Department of Defense’s Land Supplier Operations Vehicle Support division. All units must meet rigorous military performance criteria and be ready for immediate integration into defense systems.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L3-26-U-0634

This contract, issued by the Defense Logistics Agency under solicitation number SPE7L3-26-U-0634, is a small business set-aside for the procurement of a gasket with National Stock Number 5330007954086, intended for delivery under an indefinite-delivery contract structure with a guaranteed minimum of 27 units and a ceiling value of $350,000. The item is required in a quantity of 181 units, with delivery due 116 days after award, delivered FOB origin, and subject to zero variance in quantity. The gasket must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and the use of asbestos as defined in FED-STD-313 is strictly prohibited. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque bagging specifically designed to protect against ultraviolet degradation for items under Federal Supply Classes 5330 and 5331. Marking and labeling must follow MIL-STD-129, including proper 2D barcode application for automated processing, with no special marking required beyond standard identification. Preservation is controlled through dry, temperature-regulated storage with no additional preservation or cushioning materials applied. Palletization must conform to DLA’s RP001 packaging requirements, and all hazardous materials must be identified and labeled in compliance with 29 CFR 1910.1200 and MIL-STD-129, with applicable hazard warning data submitted for approval if not governed by other federal statutes. Inspection and acceptance occur at the destination, with the government retaining authority to reject noncompliant items. Contract administration is governed by FAR and DFARS clauses mandating compliance with small business representations, employment eligibility verification, trafficking in persons prevention, sustainable product requirements, cyber security standards including NIST SP 800-171 and safeguarding covered defense information, and electronic invoicing through WAWF. Payment and accounting information will be finalized upon award, and all proposals must be submitted electronically via the DLA-BSM Internet Bid Board System by the July 31, 2026 deadline.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE