Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Labeling Services

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of packaging, preservation, and labeling services strictly compliant with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 standards for the handling of waterproof, greaseproof, and opaque bags used in military logistics. These services must ensure that all materials are properly protected against environmental hazards, correctly labeled with standardized military markings, and packaged to maintain integrity throughout transport and storage. The work is specifically targeted at supporting military shipments and demands adherence to rigorous federal specifications for durability, identification, and containment. The contract was posted on July 26, 2026, with a response deadline of August 6, 2026, and is classified as a subcontract under NAICS code 424990 for other nondurable goods merchant wholesalers. Performance is designated to occur in Baltimore, Maryland, at a zip code of 21226-5000, and is managed by the Land Supply Chain division of the Department of Defense. No set-aside specifications are indicated, and the solicitation is accessible via the DIBBS platform under the reference number SPE7L126T876H. All participants must meet the technical and procedural requirements of the referenced military standards to be considered eligible.

General Info

Provide MIL-STD-compliant packaging, labeling, and preservation for military logistics in Baltimore, Maryland.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

424990 - Other Miscellaneous Nondurable Goods Merchant WholesalersView NAICS

Place of Performance

BALTIMORE, MD, 21226-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide packaging, preservation, and labeling services in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-117 for waterproof, greaseproof, opaque bags used in military shipments.

Similar Contracts

Same NAICS industry code

Remote Field Logistics and Equipment Supply

NASA Shared Services Center

POSTED

DEADLINE

Pest Control Supply and Material ProvisionThe contract pertains to the supply of pesticides, baits, traps, protective gear, and application equipment specifically designed for pest control operations, with all materials required to meet federal and environmental compliance standards. It is issued as a subcontract under the Indian Small Business Economic Enterprise set-aside program, reserved exclusively for Indian-owned small businesses within the scope of the Department of the Interior and Indian Health Services. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and is categorized under NAICS code 424990 for other miscellaneous agricultural chemical, pesticide, and fertilizer merchant wholesalers. The place of performance is designated as Dulce, New Mexico, with the contracting agency being the Albuquerque Area Indian Health Service under the Department of Health and Human Services. The set-aside status ensures that only qualified Indian small businesses may submit bids, reinforcing economic development goals within Native communities. All supplied items must be rigorously compliant with applicable regulations, and delivery is expected to support ongoing pest management efforts in federally recognized tribal areas. The opportunity is accessible through the SAM.gov platform with a unique identifier for submission and tracking purposes.

Albuquerque Area Indian Health Svc

POSTED

DEADLINE

Supply of Commercial Off-the-Shelf (COTS) Commodity ItemThe contract is for the procurement and delivery of a single commercial off-the-shelf commodity item under a firm-fixed-price structure, indicating a straightforward, non-negotiable price with no adjustments anticipated. The solicitation is issued as a subcontract by the Department of Defense through its Land Supply Chain organization, with the place of performance specified as Picatinny Arsenal, New Jersey, 07806-5000. The North American Industry Classification System code 424990 classifies this as other miscellaneous nondurable goods merchant wholesalers, suggesting the item is a standard commercial product not requiring custom development or integration. The posting date is July 26, 2026, with responses due by August 6, 2026, providing a two-week window for potential vendors to submit offers. There is no set-aside designation, meaning all eligible entities may compete without restrictions based on business size or ownership type. The contract is accessible via a DLA Dibbs portal link, and no specific point of contact is listed, indicating the process may be handled entirely through the automated system.

LAND SUPPLY CHAIN

POSTED

DEADLINE

New Product Procurement & Delivery LogisticsThe contract requires the supply and delivery of new, unused products that fully comply with current model specifications and packaging standards, ensuring consistency and quality upon arrival. All items must be transported under a comprehensive logistics management framework that includes coordination of shipping, handling, and tracking to guarantee timely and intact delivery. Delivery is structured as F.O.B. destination, meaning the seller assumes all responsibility and risk until the goods reach the designated locations within Louisiana. The solicitation falls under the NAICS code 424990 for other miscellaneous nondurable goods merchant wholesalers and is classified as a subcontract. It was posted on July 24, 2026, with a response deadline of August 18, 2026, at 4:00 PM. Procurement is being managed by the Louisiana agency under the Procurement division, and performance is limited to sites within the state. All bids must meet the specified requirements for product condition and delivery terms, and interested parties must submit their proposals through the official Louisiana procurement portal prior to the deadline.

POSTED

DEADLINE

Security Equipment & Uniform SupplyThe contract entitled Security Equipment & Uniform Supply involves the provision of essential security gear and attire for event personnel, including radios, flashlights, signage, barriers, and branded uniforms. This is a subcontract opportunity under NAICS code 424990, managed by the Mississippi Department of Finance and Administration under the agency name MPTAP. The solicitation was posted on July 23, 2026, with a response deadline of August 20, 2026, requiring interested parties to submit proposals by that date. Performance of the contract will occur within the state of Mississippi, though the specific city or location is not detailed, and all equipment and uniforms must meet the required standards for professional, identifiable use during events. The contract does not specify a set-aside classification, indicating it is open to general eligible subcontractors.

POSTED

DEADLINE

DLA-Compliant Packaging and PreservationThis contract requires the defense-compliant packaging and preservation of cooler units in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, emphasizing dry environment methods and a reduction in plastic usage to support sustainability and operational readiness. The work must ensure that all packaging techniques meet military specifications for long-term storage, transportation, and environmental resistance without compromising unit integrity or performance. The solicitation is a total small business set-aside under the SBA program, targeted exclusively at small businesses as defined by FAR 19.5, and falls under NAICS code 424990 for other miscellaneous durable goods merchant wholesalers. The contract is issued by the Department of Defense under LSO Combat Vehicles and Armament, with performance required at New Cumberland, Pennsylvania, 17070-5002. Responses are due by August 3, 2026, and interested parties must submit through the DIBBS portal using the provided reference link.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

MIL-STD-129 Packaging, Marking, and BarcodingThe contract requires full compliance with MIL-STD-129 for the packaging, preservation, marking, and barcoding of military supplies, ensuring all items are properly labeled and prepared for logistics handling. This includes implementing UPLS-compliant barcodes, accurate hazardous material labeling, and palletization that meets DLA RP001 standards. All work must ensure readiness for government distribution and storage, with strict adherence to federal military specifications for identification, protection, and traceability of materials. The solicitation is classified as a subcontract under NAICS code 424990, with a response deadline of August 3, 2026, and performance tied to the New Cumberland, Pennsylvania location with ZIP code 17070-5002. While no set-aside type or point of contact is specified, the sourcing agency is the Department of Defense through the Maritime Supply Chain organization. Participation requires proven capability in military packaging and barcoding systems, with an emphasis on precision, regulatory alignment, and secure handling of sensitive or hazardous items throughout the supply chain.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Religious Education Curriculum Materials SupplyThe contract seeks suppliers to provide printed or digital Protestant religious education materials, including lesson plans, workbooks, and VBS kits, that align with approved curricula and program requirements. All materials must meet specified standards to ensure doctrinal and educational consistency with the needs of the intended recipients. The opportunity is structured as a subcontract and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, ensuring only eligible small business concerns may respond. The NAICS code 424990 categorizes this as Miscellaneous Nondurable Goods Merchant Wholesalers, indicating the nature of the supply chain involved. The solicitation was posted on July 23, 2026, with a firm response deadline of August 6, 2026, at 6:00 PM. Performance is required to be conducted from Montgomery, Alabama, with a zip code of 36112. The contract falls under the Department of Defense, specifically managed by the FA3300 42 Cons Cc office, and is open to vendors who can deliver high-quality, faith-aligned educational resources under the constraints of federal procurement guidelines. Interested parties must submit proposals through the specified SAM.gov portal before the deadline to be considered.

FA3300 42 Cons Cc

POSTED

DEADLINE

Pesticide and Chemical SupplyThe University of Texas at Dallas is seeking suppliers to provide EPA-registered pesticides, rodenticides, insect growth regulators, and associated application materials essential for pest control operations. The solicitation is structured as a subcontract under NAICS code 424990, indicating it falls within the miscellaneous nondurable goods merchant wholesalers category. All products must meet federal EPA registration requirements and be suitable for institutional and operational pest management use. The opportunity was posted on July 22, 2026, with a firm deadline for responses set for August 19, 2026, at 6:00 PM. While the place of performance and agency office details are unspecified, the contract is accessible through the Texas SmartBuy portal, suggesting it is part of the state’s procurement network. Suppliers must ensure compliance with regulatory standards and deliver materials that support safe, effective, and legally compliant pest control activities across university facilities.

University of Texas at Dallas

POSTED

DEADLINE

Supply of Commercial Off-The-Shelf (COTS) ItemThe contract entails the procurement of a single commercial off-the-shelf item under a simplified acquisition procedure, with no requirement for installation, integration, or additional services. The item is classified under NAICS code 424990, indicating it falls within the wholesale trade of miscellaneous durable goods. The solicitation is issued by the Department of Defense under the organizational name LAND SUPPLIER OPNS WHEELED VEHICLES, with performance to occur in San Diego, California, at the specified ZIP code 92136-3581. The offeror must submit a response by the deadline of August 3, 2026, at 5:00 PM, with the solicitation originally posted on July 22, 2026. This is structured as a subcontract, and no specific set-aside categories or small business preferences are designated. All bidding must be conducted through the designated DIBBS platform via the provided URL.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of military-compliant packaging, labeling, and marking services for instructional plates, fully aligned with MIL-STD-129 and RP001 standards. This includes all necessary steps for proper palletization, documentation, and physical preparation to ensure items meet Department of Defense requirements for shipment and inventory tracking. The work must be performed at the designated place of performance in Texarkana, Texas, with a zip code of 75507-5000, and all deliverables must be accurately documented to support logistics and accountability throughout the supply chain. This subcontract, issued under NAICS code 424990 by the DLA LMP ZONE under the Department of Defense, is open for responses through August 3, 2026, with submissions required by 5:00 PM. The solicitation was posted on July 22, 2026, and all contractors must ensure compliance with the specified military packaging and marking protocols. Failure to meet these standards could result in rejection of deliverables, so adherence to federal guidelines is critical. Interested parties must access the official portal via the provided UI link to submit proposals and obtain any additional requirements.

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract calls for value-added packaging, labeling, and palletization services for defense components, strictly adhering to MIL-STD-129 standards for military shipping and identification. All work must include proper hazardous material marking and complete military shipment documentation to ensure compliance with federal defense logistics requirements. The services are intended for components that require secure, standardized handling and transportation in military supply chains. This is a total small business set-aside subcontract under NAICS code 424990, managed by the Department of Defense through the Maritime Supply Chain organization. The solicitation was posted on July 22, 2026, with a hard deadline for responses on August 6, 2026. Performance location details are not specified, but all work must meet DoD regulatory and logistical benchmarks. Interested parties must submit proposals through the DIBBS platform linked in the solicitation.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

BREECH RING BANDThe contract solicitation SPE7L1-26-R-0106 seeks 13 units of the BREECH RING BAND, identified by NSN 1025-01-724-8806, with delivery required within 320 days after award. The solicitation is a Total Small Business Set-Aside under FAR 19.5, restricted to qualified small businesses. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance or award date depending on acquisition size. The item is classified as a Category I munitions component requiring demilitarization per DODM 4160.28-Vol.3 and is subject to strict export controls under ITAR or EAR, prohibiting any transfer of technical data without prior authorization from the Department of State or Commerce. Export-controlled data may only be accessed by contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and approved DLA questionnaires. Manufacturers and non-manufacturers must comply with tailored higher-level quality requirements, configuration change management protocols including formal engineering change proposals for any deviations, and inspection and acceptance at origin. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, mandating adherence to procurement note H02. Physical identification and bare item marking are required, though individual item unique identification is waived per customer request. Government identification must be removed from non-accepted supplies, and cybersecurity compliance must meet CMMC Level 2 standards through a certified third-party assessment organization. Packaging must conform to DLA procurement standards, and all data handling, including foreign national access, is bound by DFARS 252.225-7048 and related restrictions.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

COVER, ACCESSThe contract pertains to the procurement of 41 units of a COVER, ACCESS item under solicitation SPE7L1-26-T-834S, with delivery required 116 days after award to the DLA Distribution Facility in New Cumberland, Pennsylvania. All items must comply with stringent DLA packaging and quality standards, including adherence to ASTM D3951 for non-hazardous materials and FED-STD-313 for hazardous materials, with palletization governed by RP001. Marking and labeling must follow MIL-STD-129 for shipment and MIL-STD-130N for permanent identification, including Data Matrix barcoding, while hazardous materials require compliance with OSHA’s Hazard Communication Standard and submission of approved Safety Data Sheets prior to award. Inspection and acceptance occur at origin, employing MIL-STD-1916 or ASQ H1331 zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; only zero non-conformances are permitted unless otherwise stated. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval. Export-controlled technical data is subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location, and contractors must be certified under the US/Canada Joint Certification Program, complete DLA export control training, and comply with DFARS 252.225-7048. The contractor must hold CMMC Level 2 certification for cybersecurity safeguards and meet all applicable FAR and DFARS clauses, including employment eligibility, combating trafficking, sustainable products, and accelerated payments to small business subcontractors. Payment must be submitted electronically through Wide Area WorkFlow, and the contract operates under simplified acquisition procedures with an inferred lowest price technically acceptable award basis, though formal evaluation factors are not specified. Offerors must provide their UEI and CAGE codes, represent their small business status and socioeconomic classifications, and ensure compliance with all regulatory requirements prior to submission via DIBBS by the stated deadline.

Hardware Manufacturing

POSTED

DEADLINE

LEVER, REMOTE CONTROThis contract solicits 15 units of a lever remote control with part number 3040-00-614-7196 under solicitation SPE7L1-26-Q-1370, with a delivery deadline of 118 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions tied to drawings and quality assurance documents including DRW 11671161 Notes 7 and 8, and SQAP QA-19207-11671161, which apply to critical, major characteristics and only to major characteristic 101. The item is subject to stringent quality controls including tailored higher-level requirements for manufacturers and non-manufacturers, inspection and acceptance at origin, and rigorous configuration change management requiring engineering change proposals and variance requests. All components must comply with applicable Qualified Products Lists or Qualified Manufacturers Lists as outlined in procurement note H02. The contract prohibits the use of Class I ozone-depleting chemicals in any component or process, mandating approved substitutes where required. Technical data associated with this item is subject to export control under ITAR or EAR, making unauthorized disclosure—whether to foreign nationals in the U.S. or abroad—an infringement. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export-controlled data training, and DLA authorization may access such data, with DFARS 252.225-7048 strictly enforced. Packaging must meet DLA requirements, and government identification must be removed from non-accepted supplies. Cybersecurity requirements mandate CMMC Level 2 certification by a third-party assessment organization. The solicitation closed August 5, 2026, with performance to be delivered to Barstow, CA, under federal acquisition rules administered by the Department of Defense's Land Supply Chain.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

O-RINGThe contract is for the procurement of 857 O-rings with NSN/Part Number 5331-01-516-2648, issued under solicitation SPE7L1-26-T-880X with a response deadline of August 7, 2026, and a delivery requirement of 76 days after order. All items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and must adhere to specific DLA directives including packaging standards, removal of government identification from non-accepted supplies, and mandatory retention of supply chain traceability documentation as outlined in DLA Directive Procurement Note C03 from August 2016. The use of class I ozone-depleting chemicals is strictly prohibited, and asbestos must not be present in any component; any substitute materials require formal approval per Clause L30 and Provision 4 conditions. The purchase request number is 7016086295, and the items are to be delivered to New Cumberland, Pennsylvania, 17070-5002. The contracting agency is the Department of Defense under the Land Supply Chain, with Kelly Day listed as the primary point of contact.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

O-RINGThis contract is for the procurement of 447 O-RINGS with NSN 5331-00-944-1525 under solicitation SPE7L1-26-T882K, with a total quantity requirement of 1860 units across all segments. The items must comply with strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must be manufactured to the current revision of the applicable MIL or industry-standard part specification, with prior revisions still acceptable for previously produced hardware. Only manufacturers and assemblers listed on the PRI-QPL-AMS7272 Qualified Products List are eligible to supply this item, and all products must be sourced from accredited facilities recognized by the Performance Review Institute. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and unspecified attributes are treated as major with verification levels assigned accordingly. The O-rings are classified as a TYPE I (Code Y) item with a non-extendable shelf life of 180 months and must be free of asbestos, with any previously approved asbestos-containing materials now prohibited. Packaging must meet MIL-DTL-117, Type II, Class C, Style 1 requirements, meaning they must be enclosed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor deliveries, foreign military sales, and stock shipments. The contract specifies delivery within 128 days after order issuance, with a response deadline of August 7, 2026, and falls under NAICS code 339991. The contracting office is the Department of Defense’s Land Supply Chain, with performance located at Tinker AFB, Oklahoma, and Kristie Fown is the primary point of contact for inquiries.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

GENERATOR, ENGINE ACCESThe contract pertains to the procurement of five generator engine accessories with NSN 2920-01-595-9464 and part number 4982228 from CUMMINS INC, under solicitation SPE7L1-26-T-880Y. Delivery is required within five days of contract award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the point of origin. All items must be packaged in accordance with MIL-STD-2073-1E, using packing code Q, level B, and marked per MIL-STD-129 with no special marking required; palletization must comply with DLA packaging standards. The units are to be shipped to the General Depot of Naval Supplies in Kaohsiung, Taiwan, with freight details governed by DLA procedural notes and no single freight forwarder assigned. The technical and quality requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The purchase price is set at $5.00 per unit for a total of $25.00, and the required delivery date is July 28, 2026, with the solicitation posted on July 27, 2026 and responses due by August 7, 2026. The contracting officer is Kristina Derry of the Department of Defense, Land Supply Chain, and the contract is classified under NAICS code 336310.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE

O-RINGThis contract pertains to the procurement of 1,630 O-RINGS with NSN 5331-01-080-9232 under solicitation SPE7L1-26-T-881A, issued by the Department of Defense’s Land Supply Chain. The items must be delivered within 87 days of award to Robins Air Force Base, Georgia, with full and open competition authorized. The technical and quality standards are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. All supplies must be free of asbestos and ozone-depleting chemicals, and any substitute materials must be pre-approved unless explicitly permitted by the specifications. Government identification must be removed from non-accepted supplies, and covered defense information protocols may apply. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and Kelly Day at DLA is the primary point of contact for inquiries.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

BRACKET, MOUNTINGThe contract is for the procurement of 13 mounting brackets identified by NSN 5340-00-133-8107, issued under solicitation SPE7L1-26-T-842C as a Total Small Business Set-Aside under NAICS code 332510. The item is to be manufactured using a metal casting process requiring specialized tooling, with sourcing and technical support available through DLA’s Aviation, Land & Maritime Supply Chains. Delivery is due 237 days after award to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB Origin terms requiring the contractor to assume all transportation costs to the designated destination. The contract mandates strict compliance with DLA packaging standards, including MIL-STD-129 for marking and labeling, MIL-STD-130N for Unique Item Identification and barcoding, and RP001 for palletization, while prohibiting the use of Class I ozone-depleting chemicals and requiring adherence to the DLA Master List of Technical and Quality Requirements which supersedes any conflicting specifications. The item contains components governed by Qualified Products or Manufacturers Lists, necessitating qualification compliance as outlined in procurement note H02. The contract imposes comprehensive cybersecurity and export control obligations, including mandatory CMMC Level 2 certification for the contractor or its third-party assessor and compliance with NIST SP 800-171 to safeguard Covered Defense Information as defined by RD002. All technical data associated with the item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD training, and DLA approval. Hazardous materials must be labeled and documented per 29 CFR 1910.1200 and FED-STD-313, with pre-award submission of hazard labels and Material Safety Data Sheets required. Ocean transportation must use U.S.-flag vessels unless a waiver is granted, and pre- and post-shipment notifications to MARAD are mandatory. Invoices must be submitted electronically via WAWF, and the contractor must affirm compliance with whistleblower protections, restrictions on former DoD official compensation, and employment eligibility verification. All proposals must be submitted through DIBBS by the deadline, and while no pricing data is provided, the award may be made using automated systems, with price being a significant factor under this small business-focused procurement.

Hardware Manufacturing

POSTED

DEADLINE

GASKETThe contract specifies the procurement of a gasket with NSN 5330-01-344-9582 and part number MM432136, quantity one unit, to be delivered within five days to Fort Bliss, Texas, under solicitation SPE7L1-26-T-880B. Delivery is FOB origin, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 for UV-sensitive items, with no asbestos permitted. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item must be marked in accordance with MIL-STD-130N and palletized per DLA packaging requirements. Shipments are to be made via traceable freight, not parcel post, to the specified Fort Bliss address, with the federal supply classification and unit of issue governed by DLA standards. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality clauses identified by R or I numbers, with revisions controlled by the solicitation issue date. The designated point of contact is Kristina Derry, and the required delivery date is July 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

BRACKET, ANGLEThe contract pertains to the procurement of a BRACKET, ANGLE with NSN/Part Number 5340-01-572-6194, for a single unit under Purchase Request 7016529883. Delivery is required within five days of award, and the solicitation number is SPE7L1-26-T-485J, with responses due by July 30, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must conform to DLA packaging standards, and any non-accepted supplies must have government identification removed. The alternate offeror must submit a complete data package including specifications for both the approved and alternate parts. The place of performance is Fort Campbell, Tennessee, 42223-0000, with the contracting office under the Department of Defense’s Land Supply Chain. Primary point of contact is Kristina Derry, reachable via email and phone provided. The NAICS code is 332510, and the solicitation is classified as federal.

Hardware Manufacturing

POSTED

DEADLINE

O-RING SETThe contract pertains to the procurement of an O-RING SET identified by National Stock Number 5331-01-728-9785 and part number KSD017628, with a total quantity of 2 kilotons. The item is classified under Federal Supply Classifications 5330/5331 and is highly susceptible to deterioration from ultraviolet radiation, necessitating strict packaging requirements. All units must be sealed in medium-duty, waterproof, greaseproof, and opaque bags conforming to MIL-DTL-117, Type II, Class C, Style 1, regardless of whether delivery is through Direct Vendor Delivery, Foreign Military Sales, or stock shipments. Packaging and preservation must align with MIL-STD-2073-1E and RP001 DLA packaging guidelines, using specific materials and codes such as WRAP MAT GB CUSH/DUNN and preservation method 33 (Cold/Dry), with marking and labeling strictly following MIL-STD-129, including the NSN and part number on each label. The item must be free of asbestos and ozone-depleting chemicals, with any substitutes requiring prior approval. Supply chain traceability documentation must be retained per DLA Procurement Note C03 from August 2016, and government identification must be removed from non-accepted supplies. The contract is issued under solicitation SPE7L1-26-T-847A with a response deadline of July 30, 2026, and a delivery requirement of 229 days after award, targeting delivery to the DDSP New Cumberland Facility in Pennsylvania. The delivery term is FOB Origin, and payment must be processed electronically via Wide Area WorkFlow, with invoices, receiving reports, and payment requests submitted in compliance with DFARS clauses. Inspection and acceptance occur at the destination by the Government under FAR 52.246-2. The solicitation mandates adherence to numerous FAR and DFARS clauses, including cybersecurity protections per NIST SP 800-171, prohibitions on hazardous materials like hexavalent chromium and asbestos, trafficking in persons compliance, employment eligibility verification, and restrictions on procurement from Communist Chinese military companies. Offerors must provide their Unique Entity Identifier and CAGE code, declare small business or socioeconomic status for price preference eligibility, and submit hazard labels and Safety Data Sheets prior to award. Proposals must be submitted electronically through

Other Engine Equipment Manufacturing

POSTED

DEADLINE

RETAINER, FLOATINGThis contract is a retainer agreement for a floating retainer part designated by NSN 5340014816884 and part number HS6067-9, sourced from SPS TECHNOLOGIES LLC under solicitation SPE7L1-26-U-0505. It specifies a total quantity of 65 units at a unit price of $65.00, with delivery required within 116 days FOB origin, and no variance allowed in quantity. The item is classified as a critical application item and must comply with DLA’s Master List of Technical and Quality Requirements, particularly MIL-STD-130N for identification marking, MIL-STD-129 for packaging and labeling, and ASTM D3951 for commercial packaging unless the material is hazardous, in which case FED-STD-313 applies. All packaging and palletization must adhere to RP001’s DLA packaging requirements, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at the destination point. The contract is a total small business set-aside under NAICS code 332510, issued by the Department of Defense’s Land Supply Chain under the Defense Logistics Agency. It was posted on July 27, 2026, with responses due by August 11, 2026. The unit of issue is each (EA), consistent with DoD standards, and the buyer may not purchase the full estimated quantity as listed. Technical specifications referenced are controlled by the latest revision of the DLA Master List effective on the solicitation issue date, and all packaging compliance supersedes any commercial standards unless superseded by DLA’s directives. Point of contact for the solicitation is Paul Kelley, and additional details can be referenced through the DIBBS portal.

Hardware Manufacturing

POSTED

DEADLINE