Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Compliant Packaging and Preservation

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates military-spec packaging and preservation of a pressure switch using the CLNG/DRY method to ensure long-term integrity and environmental protection during storage and transit. All packaging must comply with strict military standards, including accurate container coding and complete MIL-STD-129 marking to guarantee traceability and uniformity across the defense supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Electrical Devices Division of the Department of Defense, with performance required at the FPO address 09532. Proposals must be submitted by the deadline of July 30, 2026, and adherence to all technical requirements for preservation and labeling is non-negotiable for contract compliance.

General Info

Military-spec CLNG/DRY packaging and MIL-STD-129 marking required for pressure switch by July 30, 2026.

Agency

Department Of Defense → ELECTRICAL DEVICES DIVView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

FPO, AE, 09532, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ELECTRICAL DEVICES DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ELECTRICAL DEVICES DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Military-spec packaging and preservation of the pressure switch, including use of CLNG/DRY method, proper container codes, and MIL-STD-129 marking.

Similar Contracts

Same NAICS industry code

Packaging and Marking ServicesThe contract entails the military-standard packaging and labeling of video detectors in full compliance with MIL-STD-2073-1E and MIL-STD-129, ensuring adherence to rigorous Department of Defense requirements for durability, identification, and traceability. All items must be properly palletized according to DLA RP001, specifying the arrangement, securing, and marking of shipments to facilitate efficient handling and logistics across military supply chains. The work is classified as a subcontract under the NAICS code 561910, indicating it falls within other support activities for transportation, and is administered by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 20, 2026, and performance is expected to meet exacting military specifications without deviation, with the place of performance and point of contact details not specified in the provided data.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires the provision of military-compliant packaging, barcoding, and labeling services for shipments containing hazardous and radioactive materials, adhering strictly to Defense Logistics Agency and federal regulatory standards. All services must ensure the safe, secure, and compliant handling of sensitive cargo throughout the supply chain, with rigorous attention to identification, containment, and documentation protocols mandated by defense and environmental safety requirements. The work is performed under a subcontract arrangement for the Department of Defense through the Defense Logistics Agency, aligned with NAICS code 561910 for other support services, and is scheduled for performance beginning in July 2026. The place of performance is not specified, and the contract is managed through the DIBBS system with the referenced award and delivery identifiers.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contractor or subcontractor is required to ensure all electrical connectors are packaged in full compliance with MIL-STD-2073-1E standards, which govern the methods and materials used for military-grade preservation and packaging to protect items during storage and transit. Each shipment must also be labeled according to MIL-STD-129 requirements, ensuring standardized markings for identification and tracking throughout the defense logistics chain. Additionally, all packages must incorporate UCC/SCC-128 and Data Matrix barcodes to enable automated scanning and inventory management at government depots, ensuring traceability and operational efficiency. These specifications are mandatory for delivery to a Department of Defense facility under a subcontract tied to the Defense Logistics Agency, with the work falling under NAICS code 561910 for other support activities for transportation. The contract was posted on July 20, 2026, and performance is expected to meet rigorous federal military logistics protocols without exception.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Military-Compliant Packaging and KittingThe contract covers the inner and outer packaging of O-rings compliant with MIL-DTL-117, Type II, Class C, Style 1, requiring UV-protective bagging to ensure product integrity during storage and transport. Packaging must be palletized according to DLA RP001 standards and labeled with Data Matrix barcodes as mandated by MIL-STD-129 to support automated tracking and inventory management throughout the DoD supply chain. The work is classified as a subcontract under NAICS code 561910 and is managed by the Defense Logistics Agency under the Department of Defense, with performance expected to align with military specifications for durability, traceability, and environmental protection. The solicitation was posted in July 2026 and is tied to contract SPE7L526P2398, indicating it is part of a broader military logistics and kitting initiative.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract involves final packaging, labeling, and unique item identification (UII) application in full compliance with MIL-STD-129R and MIL-STD-2073-1E standards, ensuring all military goods are properly prepared for storage, transportation, and inventory tracking. This includes the generation of 2D barcodes and serialization of each item to meet Department of Defense requirements for traceability and accountability throughout the supply chain. The work is being performed under a subcontract awarded by the Defense Logistics Agency, which operates under the Department of Defense, and is classified under NAICS code 561910 for other support services. The contract was posted on July 20, 2026, and performance locations are not specified, indicating potential flexibility in execution sites. All deliverables must adhere strictly to federal military standards for packaging and labeling to ensure seamless integration into DoD logistics systems.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract mandates specialized packaging and preservation of electronic components in strict compliance with MIL-STD-2073-1E standards, ensuring rigorous environmental protection during both shipment and long-term storage. This includes applying prescribed preservation techniques to safeguard against corrosion, moisture, contamination, and physical damage, with all materials and procedures aligning with Department of Defense requirements for military-grade electronics. The work is classified as a subcontract under NAICS code 561910 and is managed by the Defense Logistics Agency under the Department of Defense, with performance obligations tied to federal military logistics standards. The contract was posted on July 20, 2026, and all activities must meet the exacting specifications defined in the military standard to ensure operational readiness and component reliability under austere conditions.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Packaging, Marking, and Preservation ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services strictly aligned with MIL-STD-2073-1E and MIL-STD-129 standards. This includes the accurate application of barcoding systems for inventory tracking and compliance with hazardous material labeling requirements to ensure safe handling and transportation of military supplies. All work must meet rigorous U.S. Department of Defense specifications to support logistics readiness and operational deployment. Issued as a subcontract under the Defense Logistics Agency, this procurement falls under NAICS code 561910 and is part of the broader Department of Defense supply chain infrastructure. The contract was posted on July 20, 2026, with performance activities expected to occur across unspecified locations within the United States. The award is administered through the DIBBS system, and contractors must ensure full adherence to federal military packaging standards without deviation, focusing on durability, traceability, and safety throughout the lifecycle of the packaged items.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Packaging, Marking, and Preservation ServicesThe contract requires comprehensive military-compliant packaging, marking, and preservation services in accordance with MIL-STD-129, ASTM D3951, and all applicable Defense Logistics Agency standards. These services must ensure the secure handling, identification, and long-term preservation of defense-related materials through strict adherence to federal specifications for labeling, containment, and environmental protection. The work is classified as a subcontract under NAICS code 561910 and is issued by the Department of Defense through the Defense Logistics Agency, with performance requirements aligned to the agency’s operational and logistical needs. The contract was posted on July 20, 2026, and is associated with the reference numbers SPE4AX26DP001 and SPE4AX26F294F, indicating its integration into DLA’s broader supply chain and distribution framework.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires the provision of packaging, labeling, and palletization services for insulation blankets in full compliance with DLA standards, MIL-STD-129, and ASTM D3951, ensuring all materials meet military procurement specifications for durability, identification, and handling. The work involves precise adherence to standardized procedures for securing, marking, and arranging insulation blankets on pallets to support efficient logistics and distribution within the Department of Defense supply chain. The solicitation is classified as a subcontract under NAICS code 561910, issued by the ASC Commodities Division of the Department of Defense, with performance required at Cherry Point, North Carolina, zip code 28533-5040. The opportunity was posted on July 20, 2026, and proposals must be submitted by July 28, 2026. All submissions must align with the technical and regulatory benchmarks specified to ensure seamless integration into existing military logistics systems and to satisfy the Department of Defense’s stringent packaging and labeling requirements.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThe contract requires the provision of packaging and preservation services for narcotic control cabinets in strict compliance with MIL-STD-2073-1E standards to ensure resilience and functionality throughout military logistics operations. The work must safeguard sensitive medical equipment against environmental degradation, physical damage, and contamination during transport and storage, meeting the rigorous durability requirements mandated by the Department of Defense. The packaging must preserve the operational integrity of the cabinets and support long-term storage under varied climatic and logistical conditions typical of military supply chains. This subcontract is issued under the NAICS code 561910 and is designated for performance at APO 09227-0000, reflecting its alignment with deployment-focused logistics networks. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The procurement is managed by the Medical Supply Chain FSH under the Department of Defense, emphasizing the critical nature of the packaged items in maintaining secure, controlled medical protocols in operational environments. All subcontractors must demonstrate proven expertise in military-grade packaging systems and full adherence to federal preservation standards without deviation.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 11 hours ago

DEADLINE

Packaging, Labeling, and Traceable ShippingThe contract entails the secure packaging, precise labeling compliant with MIL-STD-129 standards, and fully traceable shipment of hydraulic fluid to the Naval Air Warfare Center at Patuxent River. All tasks must adhere to rigorous military logistics protocols to ensure product integrity, tamper-proof handling, and unbroken chain of custody throughout transit. The work is executed under a subcontract framework, with the Defense Logistics Agency as the overseeing organization within the Department of Defense, and is classified under NAICS code 561910 for other support activities for warehousing and storage, indicating a focus on specialized logistics and handling services rather than general transportation. The requirements demand exact alignment with federal defense specifications to support operational readiness at a critical naval aviation facility.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

Packaging and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling of valves in strict accordance with Defense Logistics Agency and Department of Defense standards, ensuring all items are properly prepared for secure and compliant shipment. This includes adherence to all technical specifications for materials, methods, and documentation to meet federal military requirements for durability, environmental protection, and traceability during transit and storage. The work is classified as a subcontract under NAICS code 561910 and is managed by the Defense Logistics Agency on behalf of the Department of Defense, with performance anticipated to occur at unspecified locations. The solicitation was posted in July 2026, and details are accessible via the DIBBS system under contract number SPE7M026V4757, though specific point of contact or delivery locations are not provided in the available data.

Defense Logistics Agency

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → ELECTRICAL DEVICES DIV

Same awarding agency

SWITCH, PRESSUREThis contract is for the procurement of five pressure switches under NSN 5930010608769, identified by solicitation SPE7M8-26-T-5448, with a required delivery date of October 14, 2026, and a delivery window of 320 days from notice. The items are to be delivered FOB origin to the DLA Distribution San Joaquin warehouse in Tracy, California, with no variance allowed in quantity. All supplies must comply with DLA packaging requirements per MIL-STD-2073-1E and preservation standards outlined in MIL-DTL-28786 for switches, with packaging and marking adhering strictly to MIL-STD-129 and the specified palletization and preservation codes. The switches are classified as critical application items, with two specific part numbers from Eaton Aerospace LLC, and must not contain mercury or mercury compounds except in explicitly permitted exceptions such as batteries, fluorescent lamps, or functional instrumentation specified by NAVSEA, with additional containment requirements for portable devices. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criteria unless otherwise specified, and attributes are assigned verification levels based on criticality: VII for critical, IV for major, and II for minor, with corresponding AQLs of 0.1, 1.0, and 4.0. Full and open competition applies, and all technical and quality requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. Delivery must occur by June 17, 2027, and transportation logistics are subject to DLAD Proc Notes C19 and C20. The contract is managed by the Department of Defense’s Electrical Devices Division, with Dondiego Boler as the point of contact, and the NAICS code is 335931 for other electrical equipment manufacturing.

Current-Carrying Wiring Device Manufacturing

POSTED

about 11 hours ago

DEADLINE

U.S.-Flag Sea Transportation (If Applicable)The contract pertains to the sea transportation of electrical components via U.S.-flagged vessels, ensuring full compliance with U.S. defense logistics standards and applicable maritime regulations. This subcontract is categorized under NAICS code 483111, which specifically identifies water transportation of cargo, and is managed by the Electrical Devices Division under the Department of Defense. The transportation must adhere to strict federal requirements mandating the use of American-registered ships, reflecting the defense sector’s commitment to domestic maritime capability and national security protocols. The solicitation is open for responses until July 30, 2026, with the posting date set for July 19, 2026. The place of performance is designated as FPO with ZIP code 09532, indicating that the delivery and logistical handling will align with military postal and overseas operational requirements. The contract type is explicitly a subcontract, meaning it is intended to support a larger procurement effort under the Department of Defense’s supply chain. All parties involved are required to meet regulatory and operational thresholds for defense-related maritime transport, with no set-aside provisions specified, leaving the opportunity open to qualified contractors regardless of business size or status.

Deep Sea Freight Transportation

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks qualified providers to deliver compliance consulting services focused on hazardous materials management in alignment with Department of Defense and federal regulatory standards. Key deliverables include the preparation of Safety Data Sheets and the accurate application of hazard warning labels to ensure full adherence to applicable safety and labeling requirements. The work is scoped under NAICS code 541690 as a subcontract and is performance-based, with all activities expected to take place at FPO, ZIP 09532. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026, to meet the deadline. The contracting entity is the Electrical Devices Division within the Department of Defense, and the procurement is open to eligible subcontractors without a specified setaside designation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Pressure Switch / Cold Control SupplyThe contract requires the manufacturing or sourcing, packaging, labeling, and shipping of a single pressure switch or cold control unit compliant with military standards, ensuring full adherence to defense specifications for performance and durability. The scope is narrowly defined to deliver one unit that meets exacting military requirements, with all processes—from production to final shipment—subject to strict quality and documentation controls. The place of performance is designated as FPO with zip code 09532, indicating delivery to a military post office address, likely for overseas or expeditionary use. The solicitation is issued as a subcontract under NAICS code 335931, which classifies the activity within the electrical equipment and component manufacturing sector, and is managed by the Electrical Devices Division of the Department of Defense. The opportunity was posted on July 19, 2026, with a firm response deadline of July 30, 2026, giving potential suppliers a short window to prepare and submit proposals. Although no set-aside designation or point of contact is provided, the contract is accessible through the DIBBS platform, and interested parties must ensure full compliance with military standards in both technical and logistical execution.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Packaging & Palletization Services (DLA-Compliant)The contract requires the provision of military-compliant packaging and palletization services adhering strictly to DLA RP001 and MIL-STD-129 standards to ensure acceptance by government shipment authorities. All packaging must meet rigorous defense logistics requirements for durability, labeling, and handling during transport, with palletization performed to exact military specifications to support seamless integration into defense supply chains. The work is set to be performed at Tracy, California, with a zip code of 95304-5000, and the contract is classified as a subcontract under NAICS code 561910, indicating it falls within the other support services category, specifically for packaging and labeling activities for defense purposes. The opportunity was posted on July 19, 2026, with a response deadline of July 30, 2026, and is managed by the Electrical Devices Division under the Department of Defense. There is no set-aside designation or specific organization type specified, suggesting the contract is open to any qualified subcontractor capable of meeting the stringent standards outlined. Bidders must ensure full compliance with all technical and procedural requirements detailed in the referenced military standards, as noncompliance will result in rejection of delivered goods. The solicitation can be accessed via the DIBBS portal at the provided link, and while no point of contact is listed, the place of performance and applicable standards provide clear direction for proposal preparation.

Packaging and Labeling Services

POSTED

DEADLINE

Cybersecurity Compliance (CMMC Level 2 Support)The contract supports the completion of a CMMC Level 2 self-assessment and ensures full compliance with NIST SP 800-171 requirements for protecting controlled unclassified information. The work involves implementing and validating security controls necessary to meet the cybersecurity standards for safeguarding CUI, with a focus on preparing the organization for certification under the Cybersecurity Maturity Model Certification framework. This effort is critical for maintaining eligibility to handle sensitive government data within the Department of Defense supply chain. The subcontract is solicited by the Electrical Devices Division under the Department of Defense, with performance required at a location in Tracy, California, ZIP code 95304-5000. The opportunity falls under NAICS code 541512, indicating it relates to computer systems design services. The solicitation was posted on July 19, 2026, and responses are due by July 30, 2026. While no specific set-aside type or point of contact is provided, the contract is accessible through the DIBBS platform with the reference number SPE7M826T5441.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & Documentation SupportThe contract requires the identification of all hazardous materials contained within the supplied item, with full compliance to federal regulations regarding hazard communication. Prior to contract award, the offeror must provide accurate and up-to-date hazard warning labels and complete Material Safety Data Sheets that align with applicable standards, ensuring that all chemical and physical hazards are clearly documented and properly communicated. This documentation must be thorough, legally compliant, and submitted as a prerequisite for consideration, emphasizing the critical importance of safety and regulatory adherence from the outset of the procurement process. The solicitation is issued under the NAICS code 541690, reflecting services related to other scientific and technical consulting, and is categorized as a subcontract within the Department of Defense’s Electrical Devices Division. The performance location is specified as Tracy, California, with a zip code of 95304-5000. Proposals are due by July 30, 2026, following a posting date of July 19, 2026, leaving a twelve-day window for submission. The contract does not indicate a set-aside classification or specific organizational type requirements, but its emphasis on hazard compliance makes it essential for potential offerors to demonstrate proven expertise in chemical safety documentation and regulatory compliance for defense-related supply chains.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Pressure Switch (Commercial Off-the-Shelf Item)The contract requires the supply of three commercial off-the-shelf pressure switches identified by NSN 5930015391542, with all items needing to meet exact packaging, labeling, and hazardous material documentation standards to ensure regulatory compliance and safe handling during transit. Delivery must be made to the specified place of performance in Tracy, California, with the zip code 95304-5000, and all components must be furnished in full compliance with federal procurement requirements for defense-related procurements. The contract is structured as a subcontract under the Department of Defense, managed by the Electrical Devices Division, and is classified under NAICS code 334516, indicating it pertains to the manufacturing of other electrical equipment and components. The solicitation was posted on July 19, 2026, with a firm response deadline of July 30, 2026, leaving a window of eleven days for potential vendors to submit proposals. There is no set-aside classification indicated, meaning the opportunity is open to all eligible contractors without preference based on small business, veteran-owned, or other categories. The procurement is conducted through the DIBBS system, with the full details accessible via the provided link, and no point of contact information is listed in the data, suggesting submissions should follow standard DIBBS protocols. All deliverables must align with the commercial items clause and defense logistics standards to qualify for acceptance.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Supply of Mercury-Containing Push Button Switch (NSN: 5930-01-350-5710)The contract calls for the supply of a military-specification push button switch with the National Stock Number 5930-01-350-5710, which contains mercury and must fully comply with all Department of Defense technical standards, hazardous materials handling regulations, and cybersecurity requirements for defense contractors. The switch is designed for use in sensitive defense systems and must meet stringent performance, safety, and environmental compliance benchmarks due to the presence of mercury, requiring specialized packaging, labeling, and transportation protocols. All components and manufacturing processes must adhere to DLA specifications and maintain chain-of-custody integrity throughout the supply chain. The contract is designated as a subcontract with a response deadline of July 30, 2026, and was posted on July 19, 2026. It falls under NAICS code 334419 for other electronic component manufacturing and is managed by the Electrical Devices Division under the Department of Defense. The place of performance is listed as FPO with a zip code of 96661, indicating delivery to a military postal location, likely for overseas or expeditionary use. Compliance with cybersecurity standards for defense contractors is mandatory, requiring secure handling of technical data and systems integration protocols to prevent unauthorized access or tampering. The procurement is part of a broader effort to maintain qualified sources for mission-critical components with unique technical and regulatory constraints.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Logistics and Freight ShippingThe contract requires the arrangement and execution of freight shipping for a switch subassembly to a designated delivery point, ensuring full compliance with Defense Logistics Agency shipping standards and stringent traceability requirements. All logistics operations must adhere to DLA protocols to guarantee proper handling, documentation, and chain-of-custody for the component throughout transit. The place of performance is located at FPO with ZIP code 96694-3400, indicating a military postal address, and the work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation of freight. The solicitation was posted on July 19, 2026, with a response deadline of July 30, 2026, and is managed by the Electrical Devices Division under the Department of Defense. There is no set-aside designation specified, meaning any qualified entity may respond. The procurement is administered through the DIBBS system, and all bidders must align their capabilities with the precise shipping and documentation standards expected by the DLA. Emphasis is placed on reliable delivery schedules, accurate tracking, and adherence to defense logistics protocols to ensure operational readiness and accountability.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging, Labeling, and Hazardous Materials ComplianceThe contract requires the provision of comprehensive packaging, preservation, and labeling services strictly aligned with military and federal standards, including MIL-STD-129 for marking and labeling, FED-STD-313 for packaging materials, and hazardous materials regulations that mandate accurate Safety Data Sheet preparation. All work must ensure full compliance with Department of Defense requirements for the safe handling, storage, and transportation of sensitive and hazardous materials. The services are to be performed at a designated location in FPO with ZIP code 96694-3400, indicating operations will support military logistics in a deployed or remote environment. This is a subcontract opportunity under NAICS code 541380, which covers scientific and technical consulting services, suggesting the selected vendor must provide specialized expertise in regulatory compliance and logistics support. Proposals are due by July 30, 2026, and the solicitation was posted on July 19, 2026, offering a 11-day window for submission.

Testing Laboratories and Services

POSTED

DEADLINE

Switch Subassembly Manufacturing and SupplyThe contract requires the manufacture or sourcing of a commercial off-the-shelf Switch Subassembly identified by NSN 5930015642327, ensuring full compliance with applicable military specifications. This includes adherence to technical standards for performance, durability, and environmental resilience, as well as proper packaging and labeling that meet Department of Defense requirements for traceability, handling, and identification. The deliverables must be ready for immediate integration into military systems and must be accompanied by all necessary documentation to verify conformance. The solicitation is issued under the NAICS code 334413 for Electronic Component and Product Manufacturing, with a response deadline of July 30, 2026, and a posting date of July 19, 2026. The place of performance is designated as FPO with ZIP code 96694-3400, indicating delivery to a military postal location, likely for overseas or expeditionary use. The contract is classified as a subcontract and falls under the purview of the Electrical Devices Division within the Department of Defense, though no specific set-aside provisions or point of contact details are provided. Bid responses must be submitted through the designated DIBBS portal prior to the deadline.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE