This Subcontract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Military-Compliant Packaging and Preservation Services

Closed

Federal

Submission Closed07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332999

New

SLED

PLOW BLADES, NOSE PIECES, AND SHOES

Solicitation # 39-27

The State of New Hampshire, through the Department of Administrative Services, is soliciting bids for a non-exclusive contract to procure snow plow blades, nose pieces, and shoes. The equipment must be manufactured from new materials by experienced providers capable of producing at least 100 units annually. All components must be compatible with Frink or Viking truck attachments and ready for immediate use without modification. Key deliverables include various carbide blades, adaptor blades, straps, and wing shoes, with specific requirements for ASTM A36 Structural Grade hot rolled flat steel for adapter blades. Bidders are required to submit shop drawings for approval by the NHDOT Bureau of Highway Maintenance and provide Certificates of Analysis for carbide inserts and rubber molding. The award will be granted to the responsible vendor offering the lowest cost for conforming bids, with the possibility of awards by individual items. Technical requirements include specific marking and identification stamps on each blade section, the use of lead-free rust-resistant lacquer, and the exclusion of lacquer on carbide edges to allow for physical inspection. Delivery must be completed within 30 days of a purchase order, with prices quoted as F.O.B. Destination. A pre-inspection is mandatory prior to delivery. Bids must be submitted via email to the Bureau of Purchase and Property by November 9, 2026, and must include a signed transmittal letter, pricing offer, and vendor contact information.

Das Purchasing (statewide Bids & Contracts)

POSTED

DEADLINE

Grommet Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of five completed Grommet Assembly units for prime contractors supporting the DLA Weapons Support Land Supply Chain. The fabrication process must strictly adhere to Basic Drawing NR 53711 5959323 Revision NR DTD 01/01/1939 and TDP Rev A Gen 3, with identification marking applied according to MIL-STD-130N. The contractor is required to comply with the Buy American Act and maintain safeguards for covered defense information as specified by DFARS regulations. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Quick Coupling Half (NSN 4730-01-459-5745)This subcontract involves the manufacture or procurement of a Quick Coupling Half, identified by NSN 4730-01-459-5745, for the Department of Defense Fluid Handling Division. The supplier must ensure that all items strictly adhere to the Buy American Act and Berry Amendment requirements. Key technical specifications include a guaranteed shelf life of 180 months and the provision of a Certificate of Conformance in accordance with FAR 52.246-15. Logistical requirements mandate that items be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The contract specifies the delivery of one unit FOB Origin to Wright Patterson AFB. This opportunity falls under NAICS code 332999 and is managed by the DLA Land and Maritime Fluid Handling Division.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Retaining Rings (NSN 5325013106732)This subcontract involves the manufacture or procurement of retaining rings for prime contractors supporting DLA supply contracts. The specific requirements call for rings matching part number 2144-0088 and national stock number 5325013106732, with a delivery quantity of one unit shipped FOB Destination. The contractor must ensure strict adherence to military and safety standards, including marking per MIL-STD-129 and packaging according to RP001 and MIL-STD-2073-1E using JA wrap material. Additionally, all hazardous material labeling must comply with 29 CFR 1910.1200. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Spiral Wound Gaskets (NSN 5330-01-338-7775)This subcontract involves the supply of 50 spiral wound gaskets for prime contractors supporting DLA Weapons Support Land Supplier Operations Vehicle Support. The gaskets must be manufactured or sourced to meet the specific requirements of NSN 5330-01-338-7775. Additionally, the provider is required to furnish Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313. The contract falls under NAICS code 332999 and is managed by the Department of Defense. Delivery of the units is to be handled via FOB Origin shipping, with the place of performance located in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Aerospace Fastener/Component Supply (NSN 5305013656318)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Steel Stock Supply for Fastener ProductionThis subcontract involves the supply of raw steel stock for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the delivery of certified steel sheet or coil that adheres to the specific metallurgical and hardness standards outlined in MS27151C. To ensure quality and compliance, the provider must submit Material Test Reports certifying the origin and composition of the steel and must strictly comply with the Buy American Act. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with performance taking place in Barstow, California. This procurement falls under NAICS code 332999 and was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Spiral Wound Gasket Manufacturer

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing and Supply of Flexible Pipeline Spacer (NSN 4730-01-671-2151)This subcontract involves the manufacturing and supply of one Flexible Pipeline Spacer (NSN 4730-01-671-2151) for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The part must be fabricated in strict accordance with Basic Drawing NR 53711 8617176, Revision B and TDP Rev C Gen 5. Final delivery of the completed spacer is to be made to NAVSEALOGCEN. The contractor is required to adhere to rigorous quality and security standards, including JCP certification, CMMC Level 2, and full ITAR/EAR compliance. Packaging must be performed using heat-sealed barrier bags as specified by MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 332999.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

CRES Fluid Flow Restrictor SupplyThis subcontract with the Department of Defense DLA Weapons Support Fluid Handling Division involves the procurement and delivery of 431 units of Holo-Krome Part Number 52080. These Corrosion Resistant Steel fluid flow restrictor components are intended for prime contractors working on DLA Weapons Support projects, with performance taking place in New Cumberland. The supplier is required to provide comprehensive material certifications and mill test reports to verify the CRES composition of the components. Additionally, the contractor must strictly adhere to all ITAR and EAR export control regulations to ensure compliance with federal law.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Sediment Strainer Body SupplyThis subcontract involves the supply of 2,000 sediment strainer bodies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing the components according to the specifications of NSN 4730017377683, with a strict requirement that all products are free from intentional mercury additions and Class I ozone-depleting chemicals. The agreement mandates full compliance with the Balance of Payments Program and the Buy American Act. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332999. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Solid Rivet Supply (NSN 5320008675162)This subcontract involves the manufacture or procurement of 366 solid rivets meeting NSN 5320008675162 specifications for the Defense Logistics Agency Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict DLA technical and quality requirements, with a specific prohibition against the use of additive manufacturing or 3D printing in the production process. All deliverables must be marked and labeled according to MIL-STD-129 standards and delivered to Hill Air Force Base. The contract falls under NAICS code 332999 and was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract requires comprehensive cleaning, drying, preservative application, and packaging of retaining seal plates in strict adherence to MIL-STD-2073-1E, MIL-STD-129, and preservative code 00 standards. All work must meet rigorous military specifications for preservation and packaging to ensure long-term readiness, environmental protection, and uniformity across defense logistics systems. The scope demands precise execution of each step to prevent corrosion, contamination, and physical damage during storage and transit, with full documentation and labeling compliance as specified. This is a small business set-aside subcontract under NAICS code 332999, managed by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation was posted on July 14, 2026, with a response deadline of July 29, 2026. Although the place of performance and point of contact details are not provided, performers must be prepared to meet all federal contract requirements for small businesses and deliver services in full alignment with defense logistics protocols. The contract is accessible through the DIBBS portal for detailed submission guidelines and procedural instructions.

General Info

Small business subcontract for MIL-STD-compliant cleaning, drying, preservation, and packaging of retaining seal plates.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7LX-26-U-8818.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLATE, RETAINING, SEAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineJul 29

Deadline has passed

Submission Closed

07/29/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Office AddressN/A

ContactsNo contact information available

Full Description

Provide cleaning, drying, preservative application, and packaging of the retaining seal plate in compliance with MIL-STD-2073-1E, MIL-STD-129, and preservative code 00 requirements.