Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military-Grade Hardware and Fastener Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses the supply of standardized military-grade hardware and fasteners including bolts, nuts, washers, and threaded components, all manufactured to meet rigorous MIL-SPEC and NSN standards to ensure interoperability and reliability across U.S. Department of Defense systems. The items are critical for maintenance, assembly, and operational readiness of military equipment and are subject to strict quality control and documentation requirements to maintain compliance with federal defense specifications. Issued as a subcontract under the Defense Logistics Agency’s procurement framework, this agreement falls under NAICS code 332312, indicating the production of screw, nail, and other fastener manufacturing. The contract was posted on August 1, 2026, and performance is expected to support DLA’s mission to deliver integrated logistics solutions to all branches of the armed forces. While specific delivery locations and point of contact details are not provided, the contractual obligations center on consistent supply chain reliability, traceability of materials, and adherence to defense-grade manufacturing protocols without deviation.

General Info

Supply of MIL-SPEC fasteners for DoD systems under DLA subcontract, ensuring traceability and defense-grade compliance.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 1

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of standardized military hardware including bolts, nuts, washers, and threaded components compliant with MIL-SPEC and NSN requirements.

Similar Contracts

Same NAICS industry code

Manufacture of Air Conditioning Duct AssembliesThe contract requires the fabrication, assembly, testing, and certification of duct assemblies specifically designed for military air conditioning and heating systems, with strict adherence to military specifications to ensure operational reliability and environmental compatibility. All deliverables must be fully traceable through verified CAGE codes and part numbers to maintain accountability throughout the supply chain and support long-term maintenance and logistics requirements. The work is classified as a subcontract under NAICS code 332312, indicating the focus on HVAC equipment manufacturing, and is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense to support critical defense infrastructure. Bid responses must be submitted by the deadline of September 3, 2026, with no set-aside provisions specified, meaning the opportunity is open to all eligible contractors regardless of business size or certification status. The place of performance details are not provided, suggesting the work may be performed at the contractor’s facility or other approved locations, subject to approval. The contract is accessible via the DIBBS portal under solicitation number SPE4A526R0251, where full technical requirements and compliance documentation can be obtained. Successful bidders must demonstrate proven capability in military-grade HVAC component manufacturing and quality control processes to meet the rigorous standards expected by the DoD.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

in about 1 month

PIN-RIVET Supply and DeliveryThe contract entails the supply of 71 units of PIN-RIVET identified by NSN 5320013987405, with full compliance to federal and military specifications covering all requirements for packaging, labeling, and delivery. The items must be furnished in accordance with applicable defense standards and delivered to the designated destination in New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation is categorized as a subcontract under NAICS code 332312 and is managed by the ASC Commodities Division within the Department of Defense. The opportunity was posted on August 2, 2026, and responses are due by August 10, 2026, leaving a brief window for qualified vendors to submit proposals. All deliverables must meet stringent military quality and documentation requirements to ensure readiness and compatibility with defense systems.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract titled Structural Steel Fabrication and Erection is a subcontract under the Department of Defense’s Land Supply Chain, requiring the fabrication and on-site assembly of structural steel components for defense-related buildings or infrastructure. Work must be performed at a designated location with a mailing address in FPO, ZIP 96306-0001, and all components must comply with military specifications for durability, precision, and safety. The North American Industry Classification System code 332312 confirms the scope as structural metal fabrication, emphasizing fabrication of steel frames, beams, columns, and related elements for construction projects. The solicitation was published on August 2, 2026, with responses due by August 13, 2026, indicating a tight timeline for qualified subcontractors to submit proposals. Interested parties must be prepared to demonstrate capability in both shop fabrication and complex field erection, with adherence to federal defense procurement standards and security protocols. All work is subject to military oversight and delivery schedules tied to mission-critical infrastructure timelines.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Commercial Fastener Supply (CLIN 5UY76)The contract entails the supply of 1,668 commercial fasteners under CLIN 5UY76, requiring strict compliance with both military inspection standards and commercial item specifications. These fasteners must meet rigorous quality and performance benchmarks typically expected in defense applications, even though they are classified as commercial items. The procurement is structured as a subcontract under the Nuclear Reactor Program, managed by the Department of Defense, with performance obligated at Tracy, California, 95304-5000. The solicitation was posted on August 2, 2026, with responses due by August 13, 2026, indicating a narrow window for submission. The NAICS code 332312 identifies the industry as Screw, Nut, and Bolt Manufacturing, underscoring the nature of the components being procured. The contract does not specify a set-aside type, meaning it is open to all eligible vendors without preference for small businesses or other categories.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Precision Fastener Manufacturing – Hex Cap ScrewsThe contract requires the manufacture and supply of hex cap screws identified by NSN 5305015728241, with all production activities including material sourcing, machining, threading, heat treatment, and quality inspection must adhere to military specifications. The work demands precision engineering and strict compliance with defense standards to ensure reliability and performance in operational environments. All components must be produced to exacting tolerances and undergo rigorous inspection to meet the required durability and mechanical properties outlined by military requirements. The contract is classified as a subcontract under NAICS code 332312 and is being managed by the ASC Commodities Division under the Department of Defense. The place of performance is designated as Fort Carson, Colorado with a ZIP code of 80913-4093. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026. The contract is intended to support critical military logistical needs through a competitively sourced manufacturing effort, with full accountability and traceability expected throughout the production lifecycle.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplemental Small Arms Armor ManufacturingThe contract encompasses the fabrication and delivery of one unit of supplemental armor designed for small arms and fragmentation protection, requiring full adherence to military performance and safety standards. The project includes comprehensive design validation and rigorous testing phases to ensure the armor meets operational requirements under combat conditions. Manufacturing must comply with the NAICS code 332312, indicating specialized fabrication activities for defense applications. The work is under the oversight of the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with performance expected at a location in North Kingstown, Rhode Island, with a ZIP code of 02852-7538. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with the contract structured as a subcontract. No specific set-aside provisions are indicated, and the procurement is open to eligible contractors who can demonstrate capability in producing military-grade armor systems.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Seismic Restraint Fabrication and TestingThe contract entails the design, fabrication, and installation of seismic restraints for mechanical and electrical systems, with a strong emphasis on ensuring full compliance with applicable building codes and safety standards. Contractors are required to deliver fully engineered solutions that mitigate seismic risks, including the submission of detailed test data to verify performance under simulated seismic conditions. All work must meet rigorous engineering specifications and be documented to demonstrate adherence to industry-recognized protocols for structural integrity and system resilience. The solicitation is classified as a subcontract under NAICS code 332312, pertaining to metal framing and seismic restraint manufacturing, and is managed by the Florida office of Planning, Engineering and Construction. The opportunity was posted on August 2, 2026, with responses due by September 1, 2026, at 4:00 PM. While no set-aside designation or specific place of performance is indicated, the scope implies work will be performed at state-funded or regulated facilities within Florida. The contract demands technical precision, complete documentation, and verification of compliance without reliance on external citations or assumptions.

Planning, Engineering and Construction

POSTED

DEADLINE

Material Supply – Steel & RebarThe contract entails the fabrication and delivery of structural steel and rebar for concrete reinforcement, supporting construction or infrastructure projects under the purview of the Department of Defense through the Defense Logistics Agency. The work falls under NAICS code 332312, which classifies it as metal fabrication for structural applications, and it is structured as a subcontract to fulfill broader defense-related procurement needs. The solicitation was posted on August 1, 2026, and the performance location is not specified beyond the federal agency’s jurisdiction. All materials must meet stringent quality and timing requirements to ensure compliance with military construction standards, though specific delivery schedules, quantities, or technical specifications are not outlined in the available data. The contract is managed under DLA’s procurement system with the reference number SPE7M117D0001 and delivery identifier SPE7LX26F86D0.

Defense Logistics Agency

POSTED

DEADLINE

Heavy-Duty Trailer Frame and Chassis FabricationThe contract involves the fabrication of a heavy-duty trailer frame and chassis designed to support a gross vehicle weight rating of 80,000 pounds, utilizing 16-inch by 31-pound beams to ensure structural integrity and compliance with industry safety standards. The work requires precise engineering and construction to meet the demanding load-bearing and durability requirements of commercial and heavy-haul applications, with all materials and methods expected to conform to recognized structural specifications. The project is classified as a subcontract under NAICS code 332312, indicating it falls within the fabricated metal product manufacturing sector, and is being managed by the County of Maui in Hawaii. The solicitation was posted on July 31, 2026, with a firm submission deadline of August 25, 2026, and the place of performance is located within the state of Hawaii, though specific city or address details are not provided. Bidders must be prepared to deliver a fully compliant, engineered trailer frame capable of safe operation at maximum rated capacity.

POSTED

DEADLINE

Supply of Plain Hexagon Nuts (NSN 5310004909859)The contract entails the procurement and delivery of 30 units of NUT, PLAIN, HEXAGON, identified by National Stock Number 5310004909859, under military specification standards to ensure full compliance with defense requirements. Each unit must meet stringent quality and traceability protocols, ensuring that all materials and manufacturing processes are documented and verifiable throughout the supply chain. The delivery destination is USS FT LAUDERDALE (LPD 28), indicating the components are intended for use in critical naval systems requiring certified hardware. The acquisition is classified as a subcontract under the NAICS code 332312, relating to screw, nut, and bolt manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. Although the solicitation number and point of contact are not provided, the contract was posted on July 31, 2026, and includes a public-facing record linked through the DIBBS system for reference and accountability.

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Bracket ManufacturingThe contract facilitates the manufacture and delivery of 145 precision metal brackets designated by NSN 1730006709367, intended for use in defense or aerospace systems under Defense Logistics Agency procurement standards. The work is structured as a subcontract under NAICS code 332312, which covers forgings and stampings, indicating the specialized metalforming capabilities required to meet exacting technical specifications. All units must comply with stringent quality and performance benchmarks consistent with Department of Defense requirements, ensuring reliability in critical operational environments. The solicitation was posted on July 31, 2026, and the contract is tied to DLA’s broader supply chain management for defense components. While specific performance location and point of contact details are not provided, the award is processed through the DIBBS system under contract number SPE8EF23V0169, reflecting its formal status within the Department of Defense procurement infrastructure. The absence of set-aside designations suggests the subcontract is open to qualified vendors without restrictions based on business size or socioeconomic category.

Defense Logistics Agency

POSTED

DEADLINE

Structural Steel Fabrication and ErectionThe contract pertains to the fabrication and on-site erection of structural steel members for buildings or bridges under a subcontract arrangement tied to the Defense Logistics Agency within the Department of Defense. The work is classified under NAICS code 332312, which specifically covers structural steel fabrication, and is scheduled to be performed at an unspecified location, with no detailed city, state, or zip information provided for the place of performance. The contract was posted on July 31, 2026, and is linked to a specific solicitation identifier, indicating it is part of an active procurement process under the DLA’s contracting system. Although no set-aside type or organizational details are specified, the nature of the work suggests it supports defense infrastructure projects requiring precise steel assembly and installation. The absence of a point of contact and exact performance location implies that further details may be accessible through the provided DIBBS link or under the broader contract framework.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

CARTRIDGE, RESPIRATO

Solicitation # SPE8E6-26-T-3961

This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M5-26-Q-0824

The Defense Logistics Agency under the Department of Defense has issued a solicitation for a single unit of a waveguide identified by NSN 5985-01-558-4115 under purchase request 7017225749. The solicitation, numbered SPE7M5-26-Q-0824, was posted on August 3, 2026, with a response deadline of August 6, 2026, at 5:00 PM. This federal procurement is classified as a solicitation without a specific set-aside designation or NAICS code, indicating it is open to general federal contractor participation. The place of performance and point of contact information are not provided, and the contract is administered through the DLA’s DIBBS platform, with all details accessible via the provided UI link.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE8E4-26-Q-0342

The contract specifies the procurement of aluminum alloy 6061 bar stock with a flat cross section, 0.500 inches thick and 1.250 inches wide, available in whole-foot lengths of 10, 11, or 12 feet, with an approximate weight of 0.735 pounds per foot. The material must conform to SAE AMS4117M Revision M, ASTM B666/B666M-20, and ASTM B660-23 standards, with a temper designation of T6, and requires a Certificate of Quality Compliance (mill material certification) to be included with each shipment. All units must be permanently marked with minimum required data including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stamping or stenciling; adhesive labels are required for bars under 0.250 inches nominal diameter. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation per ASTM B660 and marking as per MIL-STD-129R, including special code ZZ for preservation and packing. The item is subject to strict compliance with the Qualified Suppliers List for Distributors (QSLD) program; only distributors listed on the QSLD are eligible to supply this product, and any deviation or use of non-approved suppliers constitutes an unauthorized substitution that may result in criminal penalties. Government inspection and quality conformance requirements are waived for QSLD-compliant suppliers. The contract is firm fixed price with zero variance allowed in quantity, and delivery is required within 30 days after award. All shipments must be sent via traceable freight, not parcel post, to the designated DLA depot in Tobyhanna, Pennsylvania, with full compliance to all marking and documentation requirements.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-1939

The contract specifies the procurement of one metal plate identified by NSN 9535-01-477-4004 and part number 230-10269, with a unit of issue as a single piece. Delivery is required within five days of award, with goods to be shipped FOB origin and no variance allowed in quantity. Inspection and acceptance both occur at the destination. Packaging must comply with MIL-STD-2073-1E, specifically using packaging method 10, drying method 1, and preservative material 00. Marking follows MIL-STD-129 with no special marking code, and palletization adheres to DLA packaging requirements. The shipment is to be delivered via traceable means excluding parcel post to a military address at Fort Bliss, Texas, with detailed routing instructions including RDD and TCN identifiers. The contract references technical and quality standards from the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information. The solicitation number is SPE8E4-26-T-1939, issued by the Defense Logistics Agency under NAICS code 331491, with a response deadline of August 14, 2026, and an original required delivery date of July 31, 2026.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE8E4-26-Q-0343

The contract pertains to the procurement of four metal bars with part number 9530-01-691-9562 under solicitation SPE8E4-26-Q-0343 issued by the Defense Logistics Agency. Delivery is required within 30 days of award, and responses must be submitted by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval may access the controlled data. Additionally, the contractor must be certified at Cybersecurity Maturity Model Certification Level 2 by an accredited third-party assessment organization. The point of contact is Leslie Morales-Zera, reachable via email or phone provided.

POSTED

about 5 hours ago

DEADLINE

CLOTH, CLEANING

Solicitation # SPE8E5-26-T-3752

The contract pertains to the procurement of cleaning cloths designated by part number 599306 and NSN 7920-01-614-3522, with a unit of issue of one box containing 100 items. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and acceptance occurs at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf-life items, and palletization must adhere to DLA packaging requirements. The item has a 12-month extendable shelf life per RS001, and all packaging and shipping must meet hazardous materials protocols. The delivery destination is AECOM HMMC Okinawa at Camp Kinser, FPO AP 96375, with parallel freight shipping instructions to the same location under JP address details. The contract is governed by DLA technical and quality specifications referenced in the DLA Master List, and the solicitation number SPE8E5-26-T-3752 is valid with a response deadline of August 14, 2026, and an original required delivery date of August 4, 2026. The procurement is under the NAICS code 339994 and managed by the Defense Logistics Agency.

Broom, Brush, and Mop Manufacturing

POSTED

about 5 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4547

This contract is for the procurement of six battery storage units identified by NSN 6140-01-701-5915 and part number A66-11336-002, supplied by Daimler Truck North America LLC under solicitation SPE7L7-26-T-4547. The items are classified as a Type I (Code H) critical application item with a non-extendable shelf life of 12 months, requiring strict adherence to packaging, marking, and shipping standards specified in MIL-STD-2073-1E and MIL-STD-129, including special labeling for shelf life code 32. All packaging must comply with DLA’s procurement requirements and hazardous materials handling protocols, and the units must be shipped via traceable freight methods—not parcel post—to the designated delivery point at USCG AIRSTA Barber’s Point in Kapolei, Hawaii, with delivery due within 20 days of contract award. The units must not contain intentionally added mercury except where functionally necessary in batteries or approved instruments, and any mercury-containing components must be shockproof with secondary containment per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The contract includes provisions for hazardous communication, removal of government identification from non-accepted supplies, and covers defense information under RD003, with full technical and quality requirements referenced from the DLA Master List. The unit of issue is each, priced at $6.00 per unit for a total of $36.00, with no quantity variance allowed, inspection and acceptance occurring at destination, and the original required delivery date is July 24, 2026.

Battery Manufacturing

POSTED

about 5 hours ago

DEADLINE

COMPRESSOR UNIT, REF

Solicitation # SPE8E8-26-T-4941

The contract pertains to the procurement of one compressor unit, reference model, with NSN 4130-01-490-3757, under solicitation SPE8E8-26-T-4941 issued by the Defense Logistics Agency. Delivery is required within five days of award, FOB destination, with no variance permitted in quantity, and inspection and acceptance are to occur at the delivery point. Packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, container types, and marking in accordance with MIL-STD-129, with no special markings required. The unit must not contain mercury or mercury-containing compounds unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with secondary containment per NAVSEA 5100-003D. Transportation must follow DLAD Proc Note C19 and C20, using traceable methods only—parcel post is prohibited—and shipments are to be directed to USS ASHLAND LSD-48 at FPO AP 96660 under RDD 777, with VSM used by DLA vendors. The item falls under NAICS code 333415, with a required delivery date of July 31, 2026, and the solicitation response deadline is August 14, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, and source approval documentation must meet RC001 standards. All compliance and delivery instructions are binding and must be strictly adhered to by the vendor.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-4940

The contract pertains to the procurement of one air filter element with NSN 4130016962270 and part number 8005-3401-2333, supplied by TECH-ETCH, INC. Delivery is required within five days of award, with FOB origin terms and no tolerance for quantity variance, meaning exactly one unit must be delivered. Inspection and acceptance both occur at the destination point, and the item must be packaged in compliance with ASTM D3951, subject to overriding DLA Master List of Technical and Quality Requirements, while also adhering to MIL-STD-129 for marking and labeling. Packaging and palletization must follow DLA’s RP001 requirements, with the unit of issue specified as EA and quantity per unit pack as 001. Shipments must use the fastest traceable means and explicitly prohibit parcel post; the freight delivery address is Fleet Readiness Center Aviation Support Equipment in Solomons, Maryland. The required delivery date is July 31, 2026, with a contract solicitation number SPE8E8-26-T-4940 and a response deadline of August 14, 2026. All documentation, including source approval requests and removal of government identification from non-accepted supplies, must comply with referenced DLA directives, and the contracting office is under the Defense Logistics Agency with primary point of contact Alexis Selby.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-26-T-2486

The contract specifies the procurement of a black sealing compound, identified by NSN 8030-01-511-1245 and part number PR-2201 B1, with a unit of issue of 2.5 fl oz per kit and a total quantity of one kit. Delivery is required within ten days to Fort Rucker, Alabama, FOB destination, with no variance allowed in quantity. The item is classified as a Type 2 shelf life item with an initial shelf life of six months, extendable under specified conditions, and must be stored below 80 degrees Fahrenheit. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking for Type II shelf life, and palletization must adhere to DLA packaging requirements. Hazardous material handling is governed by OSHA’s revised Hazard Communication Standard, requiring submission of approved Safety Data Sheets and compliant labels prior to award, along with employee training on the new classification and labeling system. The sealing compound must be shipped using the fastest traceable means, excluding parcel post, and is subject to inspection and acceptance at the delivery point. The solicitation is issued by the Defense Logistics Agency under contract number SPE8ES-26-T-2486, with a response deadline of August 10, 2026, and a required delivery date of August 4, 2026. The technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, applicable under the revision in effect on the solicitation issue date or award date.

Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE8E4-26-Q-0344

The contract pertains to the procurement of four metal bars, identified by part number 7053887-1 and NSN 9530-01-691-7713, under solicitation SPE8E4-26-Q-0344 issued by the Defense Logistics Agency. Delivery is required within 30 days of award, with responses due by August 17, 2026, and the solicitation posted on August 3, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons, whether inside or outside the U.S., and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program certification, completion of mandatory DOD export control training, and prior authorization from DLA. Additionally, the contractor must hold CMMC Level 2 certification through a certified third-party assessment organization and adhere to DLA packaging standards and procedures for removing government identification from non-accepted supplies. The primary point of contact is Leslie Morales-Zera, reachable via phone and email provided.

POSTED

about 5 hours ago

DEADLINE

FILTER ASSEMBLY, WAT

Solicitation # SPE8E8-26-T-4942

The contract pertains to the procurement of one FILTER ASSEMBLY, WAT with NSN 4610-01-414-2298 under solicitation SPE8E8-26-T-4942, issued by the Defense Logistics Agency. Delivery is required within 20 days to FPO AP 96672 with FOB destination terms, and inspection and acceptance occur at the delivery point. The item must comply with MIL-STD-2073-1E packaging standards, including specific packaging methods, containment codes, and marking per MIL-STD-129 without special identifiers. Palletization must meet DLA packaging requirements, and shipping must use traceable freight methods, explicitly prohibiting parcel post. The contract enforces strict zero-defect sampling protocols per MIL-STD-1916 or equivalent zero-based plans, where critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Acceptance requires zero non-conformances unless explicitly modified by the contract, and manufacturers may choose attribute or variable inspection methods under MIL-STD-1916. The contract incorporates cybersecurity requirements mandating CMMC Level 2 self-assessment compliance and applies Covered Defense Information protocols. It prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its contact surfaces, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specific naval reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The unit of issue is EA, with no quantity variance permitted, and delivery is tied to project ZH9 TP 2 with a required delivery date of August 4, 2026. All supplies must be furnished in strict alignment with DLA documentation, and vendor communications must follow designated points of contact and shipping instructions.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE