Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Military-Grade Packaging and Hazardous Materials Shipping

Active

Federal

Response Deadline11/13/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Military-Grade Packaging and Hazardous Materials Shipping supports prime contractors on US Navy projects under the Department of Defense. The scope of work involves providing specialized packaging and packing services, specifically executing Level A and Level B packing according to MIL-STD-2073 for both CONUS and OCONUS transport. The contractor is responsible for delivering fully packed and marked shipping containers that are ready for transport, utilizing MIL-STD-2073-1 Appendix C containers. Compliance with strict military and federal standards is mandatory, including marking containers per MIL-STD-129 and managing hazardous materials in accordance with 49 CFR and Performance Oriented Packaging standards. This opportunity is categorized under NAICS code 488490 and was posted by the Navsup Weapon Systems Support Mech. The response deadline for this requirement is November 13, 2026.

General Info

Military-grade packaging and hazardous materials shipping for US Navy projects by November 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

488490 - Other Support Activities for Road Transportation

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QQC03.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FEEDER ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 08:30:00 PM UTCin 22 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized packaging and performs packing for prime contractors on US Navy projects. Executes Level A and Level B packing per MIL-STD-2073 for CONUS and OCONUS transport. Marks containers per MIL-STD-129 and handles hazardous materials per 49 CFR and Performance Oriented Packaging (POP) standards. Uses MIL-STD-2073-1 Appendix C containers. Delivers packed and marked shipping containers ready for transport.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and MarkingThis subcontract, titled MIL-SPEC Packaging and Marking, involves providing specialized packing and marking services for prime contractors on DLA supply contracts. The scope of work requires the delivery of motors packed and labeled for government transport, with domestic shipments meeting Level B standards and overseas shipments adhering to Level A or B standards. The contractor must ensure strict compliance with MIL-STD-129 and MIL-STD-2073-1, which includes applying specific markings and attaching Depot Level Repairable Labels using approved containers. This opportunity is issued by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency under NAICS code 488490, with a response deadline of November 5, 2026.

SPRMM1 DLA Mechanicsburg

POSTED

about 5 hours ago

DEADLINE

Traffic Control Services, Statewide

Solicitation # 601440000052392

The Texas Department of Transportation (TxDOT) is seeking a contractor under solicitation number 601440000052392 to provide statewide traffic control services. The primary objective of this contract is to ensure the safe routing of traffic through highway construction areas and TxDOT maintenance work zones across the state of Texas. The selected provider will be responsible for supplying all necessary labor, equipment, and materials required to execute these traffic control operations. Interested respondents must register through the Euna Procurement website and submit their responses via the TxDOT Procurement Portal. The deadline for submission is November 30, 2026, at 9:00 PM, and no responses will be accepted after this time. Jennifer Weiss serves as the primary point of contact for this procurement. All updates, addendums, and revised documents will be posted on the official solicitation website, which respondents are required to monitor.

Texas Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Freight ServicesThis subcontract opportunity, titled MIL-SPEC Packaging and Freight Services, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The contractor is responsible for providing specialized military-grade packaging and transportation for prime contractors fulfilling DLA supply contracts. This includes packaging materials according to MIL-STD-129 and RP001, as well as executing hazardous materials packaging in compliance with FED-STD-313 and TQ requirement IP025 using approved MIL-SPEC materials and labeling systems. The scope of work requires the delivery of properly packaged and labeled shipments FOB Origin to DLA Distribution in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026. The contract falls under NAICS code 488490 and is specifically designed to ensure that critical military supplies are transported securely and in accordance with strict federal and military standards.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

MIL-STD-129 Compliant Packaging and Palletization ServicesThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing specialized packaging, marking, and palletization services for prime contractors. The scope of work requires strict adherence to MIL-STD-129 for marking and labeling, RP001 DLA Packaging Requirements for palletization, and ASTM D3951 standards. Additionally, the contractor is responsible for removing government identification from non-accepted supplies in accordance with RQ011 to ensure all shipments are fully prepared and ready for transport. The project is categorized under NAICS code 488490 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, for this specific procurement opportunity.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

MIL-STD-2073 Compliant Packaging and ShippingThis subcontract involves providing specialized packaging and delivery services for prime contractors supporting the Department of Defense under the Navsup Weapon Systems Support Mech agency. The primary scope of work focuses on the secure packaging of critical naval components in strict accordance with MIL-STD-2073 and the coordination of FOB Destination delivery. The contractor must ensure full compliance with hazardous materials regulations, specifically FAR 52.223-3, FED STD 313, and OSHA 29 CFR 1910.1200. This opportunity falls under NAICS code 488490, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Medical Grade Packaging and Delivery ServicesThis subcontract for Medical Grade Packaging and Delivery Services supports prime contractors on DLA Troop Support Medical Supply Chain projects. The scope of work involves performing specialized medical packaging using sealed unit containers and preparing exterior shipping containers in accordance with MIL-STD-2073-1E. All medical devices must be fully packaged and marked according to Medical Marking Standard No. 1 before delivery. The contract requires the delivery of these medical devices to Fort Wainwright, Alaska, on a FOB Destination basis. Managed under the Department of Defense and the Medical Supply Chain MD Surg FSF, the project falls under NAICS code 488490. The solicitation was posted on October 20, 2026, with a response deadline of October 26, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the DLA Weapons Support Land Supply Chain. The scope of work focuses on preparing heavy vehicular components, specifically a fully packaged and marked axle assembly, for transit to Fort Polk, Louisiana. All work must be executed in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, utilizing palletization requirement RP001 and packaging data QUP 001. The project is managed under NAICS code 488490 and requires shipping on a FOB Origin basis. Interested parties should note that the response deadline is November 2, 2026, with the final delivery destination being Fort Polk.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Logistics

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Traffic Management Services NI,SI & VI

Solicitation # RFSQ 23124-1

The British Columbia Hydro and Power Authority is soliciting Request for Standing Qualifications (RFSQ 23124-1) for Traffic Management Services across the Northern Interior, Southern Interior, and Vancouver Island regions. This three-year contract, based on hourly rates, requires the provision of Traffic Control Personnel (TCP) and associated equipment, including specialized professional engineering services for the signing and sealing of specific Traffic Management Plans. All operations must comply with the Ministry of Transportation and Transit Traffic Management Manual for Work on Roadways and the BC Wildfire Act. To qualify, respondents must have a pending or approved status with SafeContractor or a Safety Questionnaire. Evaluation is based on service capability, requiring a preference for three years of experience, including examples of large-scale projects and emergency work within the last three years, along with three recent customer references. Awarded providers must maintain a 24/7 dispatch service and provide key personnel, including a Relationship Manager, Safety Representative, and Training Representative. Submissions must be provided in Excel format and include detailed pricing for years one through three, as well as union certifications and relationship disclosures to prevent conflicts of interest.

British Columbia Hydro and Power Authority

POSTED

DEADLINE

in over 2 years

MIL-STD-129 Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging, marking, and palletization services for prime contractors fulfilling DLA supply contracts. The scope of work specifically requires the delivery of a palletized, labeled, and marked steam cooker. All services must be executed using industrial palletizing equipment and compliant labeling systems to ensure equipment is secure for transit. The project must adhere to strict military standards, specifically MIL-STD-129 for marking and labeling and RP001 for DLA packaging requirements. This effort is managed under the Department of Defense for the Subsistence FSE Supply Chain, with the place of performance located in San Diego, California.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

LOCAL LET MAINTENANCE CONTRACT, HARRIS CO, TRAFFIC CONTROL SERVICES

Solicitation # 6506-72-001_1126

The Texas Department of Transportation is soliciting bids for a Local Let Maintenance Contract for traffic control services located at various highways in West Harris County, including US 0290. This solicitation, identified by number 6506-72-001_1126, has an estimated cost of 580,827.76. The response deadline for this opportunity is November 10, 2026, at 10:30 AM. The scope of work requires the completion of traffic control services within a performance period of 365 calendar days. A performance guaranty of 12,000.00 is required for the contract. Bidders are directed to the Electronic State Business Daily, the Electronic Bidding System, and the project proposal as the official sources for all bidding information and project requirements.

Texas Department of Transportation

POSTED

DEADLINE

616513 DISTRICT 6 Scheduled & Emergency Traffic Control and Setups at Various Locations

Solicitation # BD-27-1030-0H100-0H002-134565

The Massachusetts Department of Transportation Highway Division is soliciting bids for Project 616513, which entails scheduled and emergency traffic control and setups at various locations within District 6. This open market procurement has an estimated total value of 770,000.00 dollars and includes price adjustments for diesel fuel, gasoline, Portland cement mixtures, and hot mix asphalt. The scope of work covers the deployment of temporary traffic management, with specific labor participation goals of 15.3 percent for minorities and 6.9 percent for women. Additionally, the project requires adherence to prevailing wage rates and Architectural Access Board regulations. Eligible bidders must possess a valid MassDOT vendor code and be pre-qualified in the Traffic Signals category prior to the proposal opening. All electronic proposals, including a required proposal guaranty of 5 percent of the bid value and the completed Request Proposal Form R109, must be submitted via bidx.com by November 10, 2026, at 2:00 P.M. Paper copies will not be accepted, and bidders are cautioned not to use COMMBUYS to bid on this project. Bidders must also secure a Digital ID from the submission portal at least 14 days before the deadline.

0H100 - HIGHWAY

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Manufacture or Refurbishment of Pump Cylinders (NIIN 012294986)This subcontract involves the manufacture or refurbishment of nine pump cylinders (NIIN 012294986) for prime contractors supporting U.S. Navy projects under the Department of Defense. The selected provider must utilize precision machining equipment to fabricate or restore the cylinders in strict accordance with CAGE Drawing specifications and TDP Version 021. Administrative requirements include the submission of all necessary data and waiver requests through the Electronic Contractor Data Submission system. Additionally, the contractor must ensure full compliance with the Trade Agreements Act and the Buy American-Balance of Payments Program to successfully deliver the completed and inspected units.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 5 hours ago

DEADLINE

Valve Assembly Replacement Parts SupplierThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the supply of replacement parts, seals, and hardware for the Disk Assembly Valve, NSN 4820-01-068-1410. The supplier is responsible for providing OEM or approved equivalent components, gaskets, and fasteners to prime contractors working on Department of the Navy projects. All materials must be delivered directly to the designated repair facility. To ensure quality and regulatory compliance, the supplier must provide certificates of conformance and country of origin certifications. Additionally, all deliverables must adhere to the Trade Agreements Act per FAR 52.225. The opportunity was posted on October 22, 2026, with a response deadline of December 16, 2026, falling under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

in about 2 months

Valve Disk Assembly Repair and ModificationThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, requires the teardown, evaluation, and repair or modification of a specific valve disk assembly with NIIN 010681410. The selected contractor will be responsible for disassembling the unit to assess wear and performing necessary repairs in strict accordance with technical orders, manufacturing operations, and approved Department of Defense quality requirements. The process involves the use of precision measurement tools and specialized tooling to ensure the component meets all operational standards. The primary objective of the contract is the delivery of one fully repaired and certified valve disk assembly for use by prime contractors on Department of the Navy projects. This effort falls under NAICS code 811210. Interested parties must submit their responses by the deadline of December 16, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

in about 2 months

Supply of Original Equipment Manufacturer (OEM) Valve PartsThis subcontract involves the supply of Original Equipment Manufacturer (OEM) valve parts, including replacement parts, seals, gaskets, and internal components, for prime contractors working on NAVSUP Weapon Systems Support Mech projects. The selected provider must be an authorized distributor of the original manufacturer to ensure all components meet original manufacturer specifications and drawings. Deliverables include certified OEM replacement parts and required Material Safety Data Sheets (MSDS) that comply with OSHA/FED STD 313 standards for hazardous materials. This opportunity falls under NAICS code 423830 and is associated with the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Specialized Repair and Overhaul of Globe ValvesThis subcontract involves the specialized technical repair and overhaul of Globe Valves for prime contractors supporting NAVSUP Weapon Systems Support Mech projects under the Department of Defense. The selected provider must be an authorized manufacturer service provider capable of executing all work according to original manufacturer specifications, drawings, and technical orders. Key requirements include the ability to perform comprehensive inspection and testing, as well as ensuring all physical marking adheres to MIL-STD-130, REV N. The contractor is responsible for providing all necessary tooling for disassembly, machining, and pressure testing to deliver fully repaired and certified valves. This opportunity falls under NAICS code 811210, with a response deadline set for November 6, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Depot Level Repair of Assemblies (Ref No. 5544274)This subcontract, managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, involves performing depot-level repairs on assemblies for prime contractors supporting US Navy projects. The primary objective is to restore items to A Condition Stock by executing technical repairs that meet the functional requirements for CAGE Code 53711 and Reference No. 5544274. The scope of work includes utilizing specialized testing equipment to verify condition status and ensuring all repaired items are marked according to MIL-STD-130, REV N, with the application of DLR labels. This project falls under NAICS code 811219, with a response deadline set for November 13, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Diesel Engine Replacement Parts and ComponentsThis subcontract involves the procurement of internal components, seals, gaskets, and modified parts for diesel engine NIIN 016779537 to support prime contractors on US Navy NAVSUP projects. The scope of work includes sourcing either commercial off-the-shelf or custom-manufactured OEM equivalent components, which are to be delivered as individual parts or kits to the designated repair facility. Managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, the contract falls under NAICS code 332991. A critical requirement for the provider is strict adherence to the Buy American Act 252.225-7001, which necessitates thorough domestic content verification for all supplied materials.

Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

Diesel Engine Teardown and Repair ServicesThis subcontract involves providing specialized teardown, evaluation, and repair services for diesel engine NIIN 016779537 in support of US Navy NAVSUP projects. The scope of work includes disassembling engines to identify wear, performing necessary mechanical repairs or modifications, and ensuring all units are packaged according to MIL-STD-2073. The final deliverable is a fully repaired and certified diesel engine. To execute this contract, the provider must utilize precision engine machining tools and adhere strictly to NAVSUP 1397-1 labeling standards. Additionally, the contractor is required to provide CMMC UIDs via SPRS. This opportunity is managed under NAICS code 811310 for the Department of Defense, specifically the Navsup Weapon Systems Support Mech.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 5 hours ago

DEADLINE

Supply of Raw Materials/Components for Linear Direct ValvesThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the supply of raw materials, castings, and specialized internal components for U.S. Navy linear direct valve projects. The scope of work requires the sourcing of high-grade alloys and precision-cast valve bodies that strictly adhere to the metallurgical and dimensional specifications outlined in TDP Version 005. To ensure quality and regulatory compliance, the provider must furnish Mill Test Reports for material certification and meet all FAR 25.105 Domestic End Product requirements. The contract focuses on the delivery of certified raw materials and sub-components, with a response deadline set for November 20, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 5 hours ago

DEADLINE

Manufacture or Refurbishment of Linear Direct ValvesThis subcontract involves the manufacture or refurbishment of Linear Direct Valves (NIIN 014241201) for prime contractors supporting U.S. Navy projects. Managed by the Department of Defense under Navsup Weapon Systems Support Mech, the work requires the fabrication or restoration of valve bodies and internals using precision machining equipment. All deliverables must be produced in strict accordance with Technical Data Package Version 005 and Navy quality requirements, with final packaging adhering to MIL-STD-2073. The opportunity is categorized under NAICS code 332911 and was posted on October 22, 2026, with a response deadline of November 20, 2026. The scope of work ensures that all completed valves are fully tested and meet the rigorous specifications necessary for naval application.

Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

Certified Metal Material SupplyThis subcontract, titled Certified Metal Material Supply, involves the procurement and delivery of certified raw metals and alloys to support prime contractors working on Department of the Navy projects. The selected provider is responsible for sourcing domestic metal stock and delivering it directly to the fabricator, ensuring all materials are accompanied by full material certifications and Mill Test Reports to verify both origin and grade. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, the contract strictly requires compliance with the Buy American Act for all domestic end products. The opportunity is categorized under NAICS code 331210, with a response deadline set for December 23, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 5 hours ago

DEADLINE

Specialized Inspection and Testing ServicesThe Specialized Inspection and Testing Services subcontract involves providing independent quality assurance and non-destructive testing for prime contractors on Department of the Navy projects. The scope of work focuses on conducting visual inspections of weld joints according to MIL-STD-2035 and performing dimensional inspections per DI-MDTI-808089B utilizing precision measuring instruments and CMM. Qualified providers must hold Certified Weld Inspector credentials to deliver essential documentation, including conformance inspections, final assembly dimensional reports, and weld joint visual inspection reports. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for December 23, 2026.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS