Top

Military-Grade Packaging and Marking Compliance

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

322299 - All Other Converted Paper Product ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-R-0062.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FRAME, ARMOR, VEHICUL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Packaging of armor frames per MIL-STD-2073-1E to ensure durability and compliance during transport and storage.

Similar Contracts

Same NAICS industry code

NAICS: 322299

SLED

146721 FILTER, BAG

Solicitation # 231732

The Los Angeles Department of Water and Power is seeking bids for the procurement of bag filters under solicitation number 231732. This opportunity is categorized under NAICS code 322299 and will be performed in Los Angeles, California. The point of contact for this request is Ness P. Cua. Interested parties must submit their bids electronically through the electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. The solicitation was posted on September 1, 2026, and the deadline for responses is September 11, 2026, at 9:00 PM.

POSTED

DEADLINE

Supply of Gasket Paper (NSN 5330-01-179-3053)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # N0010425QEA41

This solicitation, issued by Navsup Weapon Systems Support Mech, is for the procurement of 48 by 72 inch EU bags. The requirement is covered under the RADCON BPA, meaning only current BPA holders are eligible to submit technically acceptable quotes. The contract includes strict quality assurance mandates, specifically requiring First Article Testing and approval prior to full-scale production. Contractors must provide a delivery schedule that accounts for both the time required for First Article Testing delivery to FRSMD and the subsequent delivery of completed items upon approval. Technical compliance is a critical component of this contract, with specific instructions regarding the order of precedence for documentation, including amendments, schedules, and technical data. Contractors are prohibited from using mercury or mercury-containing compounds in any hardware or supplies. Packaging must adhere to specific cleanliness controls and MIL-STD-2073 requirements, with particular attention to heat-sealed envelopes for components subject to cleanliness standards. Additionally, the contract outlines rigorous reporting requirements, necessitating the submission of complete certification packages and vendor-certified reports of test and inspection in accordance with specified data item descriptions.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

84--COVERALLS,ANTI-EXPO

Solicitation # SPE1C126Q0436

DLA Troop Support is soliciting quotes for the procurement of 12 anti-expo coveralls under National Stock Number 8415015937934. This requirement is listed under solicitation number SPE1C126Q0436 and is designated as a total small business set-aside. The approved source for this item is 1KSQ5 PS4049, and delivery is required to FB2500 21 SW LGRDDC within 120 days after the order is placed. The procurement is being handled as a Request for Quote via electronic submission, with a response deadline of September 18, 2026. All interested and responsible sources may submit quotes electronically through the provided portal. The contract falls under NAICS code 322299 and is managed by the office located in Philadelphia, Pennsylvania.

POSTED

DEADLINE

Battery Packaging and PreservationThe contract requires the provision of military-compliant packaging, preservation, and marking for storage batteries in full adherence to Department of Defense standards. This includes the use of moisture barrier packaging to prevent environmental degradation, robust shock protection to safeguard against physical damage during handling and transport, and long-term storage preservation techniques to ensure operational readiness over extended periods. All elements must meet stringent military specifications to maintain battery integrity and functionality under demanding conditions. The work will be performed under a subcontract awarded by the Defense Logistics Agency, a component of the Department of Defense, with the NAICS code 322299 indicating classification under other pulp, paper, and paperboard mills. The contract is identified by the award number SPE7L422D5004 with delivery order SPE7L126F056C and will be managed through the DIBBS system. While no specific location or point of contact is provided, the scope is focused on meeting DoD requirements for packaging and preservation regardless of where the work is executed, ensuring consistent quality and compliance across the supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Blister Heat/Pill CardsThis subcontract involves the supply of medical-grade blister heat and pill cards for prime contractors operating at the Elayn Hunt Correctional Center for the Louisiana Department of Corrections. The provider is responsible for delivering new, current-model plastic packaging on an as-needed basis through a blanket order system. All products must strictly conform to applicable Federal and State laws and regulations to ensure medical compliance. Logistics for the contract are handled via F.O.B. Destination, with the provider ensuring the physical delivery of the packaging materials directly to the facility. Managed by the Louisiana Procurement agency under NAICS code 322299, the agreement focuses on maintaining a consistent supply of specialized medical packaging to support correctional facility operations.

POSTED

DEADLINE

Non-Hazardous Commercial Packaging Services

Defense Logistics Agency

POSTED

DEADLINE

26-350SOS-PHYSE-B-51454 | Hard Wound White Paper Towels

Solicitation # 26-350SOS-PHYSE-B-51454

The Illinois Secretary of State, through the Department of Physical Services, is soliciting bids for the procurement of 945 cases of white, 800 ft hard wound, non-perforated paper towels. The required supplies must feature a width between 7.875 and 8 inches, a core size between 1.5 and 2.0 inches, and be packaged as 6 rolls per case. Additionally, the product must be 100 percent recycled paper or US Green Building Council Certified Rapidly Renewable Fiber. The contract is a firm-price agreement with an initial term extending from execution through May 31, 2026. Award will be granted to the responsive and responsible bidder offering the lowest total cost, which must include all shipping expenses. Delivery is required within three weeks of the award to the Department of Physical Services in Springfield, Illinois, with the requirement that items be delivered on pallets no taller than 7 feet. The vendor must provide a twelve-month warranty against defects and maintain comprehensive insurance coverage, including general commercial liability of 2 million dollars annual aggregate and auto liability of 1 million dollars per occurrence. Payment will be issued upon completion of the contract, provided the vendor complies with all state certifications, including debt delinquency, environmental protection, and human rights standards. The agency maintains the right to terminate the contract for convenience with thirty days' written notice.

POSTED

DEADLINE

Disposable Paper Goods and Tableware SupplyThis subcontract for the State of Illinois involves the supply of non-food disposable items to prime contractors managing food service projects. The scope of work includes the delivery of bulk paper and plastic consumables such as napkins, paper cups, lids, plates, toothpicks, straws, and plastic tableware, with a strict prohibition on the use of polystyrene foam products. The contract is managed by the Administration agency and is centered in Springfield, Illinois. It is categorized under NAICS code 322299 and was posted on November 26, 2025.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE7MC-26-T-254X

This contract is a solicitation from the Defense Logistics Agency for the procurement of one ball valve, identified by NSN 4820-01-698-5994. The delivery requirement is set for 20 days after the order is received. The procurement is governed by specific technical and quality requirements, including DLA packaging standards and the mandatory removal of government identification from any non-accepted supplies. Strict environmental and legal compliance is required, specifically prohibiting the use of class I ozone depleting chemicals and the intentional addition of mercury, with limited exceptions for specific functional components. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export training.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28HE

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A6-26-T-28HE for the procurement of five Housing Assembly, AI units. These components are identified by NSN/Part Number 1680-01-723-3733 and are requested under purchase request 7015537589. The solicitation was posted on September 9, 2026, with a response deadline set for September 17, 2026. This federal requirement is managed by the Defense Logistics Agency and is available for bidding through the DIBBS procurement portal.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28GQ

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A6-26-T-28GQ for the procurement of two actuator clamps, identified by NSN/Part Number 4820-01-666-2349. This federal requirement is tracked under purchase request 7018247571. The solicitation was posted on September 9, 2026, and establishes a response deadline of September 17, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

DEADLINE

PIN, STRAIGHT, HEADLESS

Solicitation # SPE4A6-26-T-28HR

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE4A6-26-T-28HR for the procurement of ten headless straight pins, identified by NSN/Part Number 5315-01-296-8816. This federal requirement is tracked under purchase request 7017720010. The solicitation was posted on September 9, 2026, with a response deadline set for September 17, 2026. Interested parties can access further details and submit responses through the DIBBS portal.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A7-26-T-728R

The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A7-26-T-728R for the procurement of one electrical equipment shelf. The item is identified by NSN/Part Number 5975-01-612-7810 and is associated with purchase request 7016916218. This federal solicitation was posted on September 9, 2026, with a response deadline of September 17, 2026. Interested parties can find further details and submit responses through the DIBBS portal.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

PARTS KIT, BALL VALVE

Solicitation # SPE7MC-26-T-254F

This solicitation from the Defense Logistics Agency is for 100 units of a ball valve parts kit, identified by NSN 4820-01-164-9257. Each kit consists of one ball and two seats. The contract is a total small business set-aside under NAICS code 332911, with a required delivery timeframe of 20 days after receipt of order. Strict compliance is required regarding cybersecurity and export controls. The contractor must meet CMMC Level 2 certification and adhere to DLA packaging requirements. Because the item contains technical data subject to ITAR or EAR regulations, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed export-control training. All technical data must be handled according to DFARS 252.225-7048.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-254N

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of four stop-check valves under NSN 4820016585418. The requirement specifies compatible part numbers from McMaster-Carr and Parker Hannifin Corporation. Delivery is required within 20 days, with the original required delivery date set for September 8, 2026. The items are to be delivered FOB Origin and will undergo inspection and acceptance at the destination. The procurement is subject to the DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging and RQ011 regarding the removal of government identification from non-accepted supplies. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Shipping must be handled via traceable means to the Naval Station Newport in Rhode Island, and the use of parcel post is strictly prohibited.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-4301

This contract, identified as SPE8E5-26-T-4301, is a solicitation issued by the Defense Logistics Agency for the procurement of one twist drill, identified by NSN 5133016861751 and part number DBF13/32C. The order specifies a delivery timeframe of 20 days after receipt, with a required delivery date of September 4, 2026. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. The item is to be delivered to the US Army A Co 501st DSB in Hohenfels, Germany, and must be shipped via traceable means. Compliance with several technical and quality standards is required, including DLA packaging requirements RP001, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. The contract also references specific quality requirements RA001, RQ011, and RD003 regarding government identification and covered defense information.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

RUBBER SHEET, CELLULAR

Solicitation # SPE8E5-26-T-4293

This contract is for the procurement of 10 sheets of black cellular rubber sheet, identified by NSN 9320011058327. The material must measure 36 inches in length and width with a thickness of 0.090 inches, adhering to technical standards SAE AMS3198L and MIL-STD-129R. The item is classified as a Type 2 product with a 36-month extendable shelf life. The agreement specifies delivery within 20 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, specifically avoiding plastics for wrapping and cushioning where possible. The final delivery destination is the NAVSUP Fleet Logistics Center in Yokosuka, Japan.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-255A

This solicitation issued by the Defense Logistics Agency under the Department of Defense is for the procurement of one butterfly valve, identified by NSN 4820-01-670-0625. The contract is open for full and open competition with a required delivery timeframe of five days after receipt of order. The primary point of contact for this requirement is Chad Zernis. The contract is subject to strict technical and quality requirements, including specific DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-4298

This contract, identified as SPE8E5-26-T-4298, is a solicitation issued by the Defense Logistics Agency for the procurement of one twist drill, part number DBF3/8C and NSN 5133016861753. The order specifies a delivery timeframe of 20 days after the order is placed, with a required delivery date of September 4, 2026. Shipping is set as FOB Origin, and the items are to be delivered to the US Army A Co 501st DSB in Hohenfels, Germany, using traceable shipping methods. The procurement is subject to several technical and quality requirements, including DLA packaging standards RP001 and ASTM D3951, as well as marking and labeling per MIL-STD-129. It also incorporates guidelines for the removal of government identification from non-accepted supplies and the handling of covered defense information. Inspection and acceptance will take place at the destination.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-254E

This contract is for the procurement of one 24 VDC solenoid valve with 1/2 inch connections, identified by NSN 4810002369059. The item is classified as a commercial product and must adhere to specific technical data packages and reference drawings. A critical requirement is that all components must be sourced from Qualified Products Lists or Qualified Manufacturers Lists. Additionally, the use of Class I ozone depleting chemicals is strictly prohibited. The agreement specifies a delivery timeframe of 20 days after order, with the final destination and acceptance point located in Kapolei, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331.

Industrial Valve Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 12 days

View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS