Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Grade Packaging and Marking Specialist

Active

Federal

Response Deadline09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense at the DDSP New Cumberland Facility seeks a Military-Grade Packaging and Marking Specialist to support prime contractors on DLA supply contracts. The selected provider will be responsible for the specialized packaging and marking of heater units, ensuring all deliverables are ready for shipment. This includes the use of military-specification crates and cushioning to protect the units during transport. Compliance with strict federal and military standards is mandatory, specifically MIL-STD-129 for markings and MIL-STD-2073-1E and RP001 for packaging. Additionally, the contractor must apply hazardous material labels in accordance with 29 CFR 1910.1200 when applicable. Interested parties must respond by September 14, 2026, for performance at the New Cumberland location under NAICS code 561910.

General Info

Military packaging specialist for DoD heater units at New Cumberland; respond by September 14.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E8-26-T-5507.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HEATER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 2

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking for prime contractors on DLA supply contracts. Applies markings per MIL-STD-129 and packages units according to MIL-STD-2073-1E and RP001. Applies hazardous material labels per 29 CFR 1910.1200 where applicable. Uses military-specification crates and cushioning. Delivers properly marked and packaged heater units ready for shipment.

Similar Contracts

Same NAICS industry code

Military-Grade Packaging and Palletization Services

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

MIL-STD Packaging Provider

MARITIME SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Military Grade Packaging and Marking Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Military Preservation and Packaging Services

Navsup Weapon Systems Support

POSTED

DEADLINE

MIL-STD-2073 Packaging Services

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

Military Preservation and Packaging Services

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 1 month

MIL-STD-129 Compliant Packaging and Shipping

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Vehicle Installation and Equipment Kits (NSN 2540015408657)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Military-Grade Packaging and Marking

FLUID HANDLING DIVISION

POSTED

DEADLINE

DLA Compliant Packaging Services

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Grade Packaging and Marking Provider

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Power Supply Unit Supplier (NSN 6130-01-553-7134)

Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Globe Valves (Critical Application Item)

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Other Support Activities for Air Transportation

POSTED

about 16 hours ago

DEADLINE

Semiconductor Component Supplier

Semiconductor and Related Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

CARTRIDGE, DEHYDRATOR

Solicitation # SPE8E8-26-Q-0493

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-190C

This contract is for the procurement of 13 bronze body 1 inch globe stop check valves with flanged end connections, identified by NSN 4820012711891 and Hunt Valve Company part number 6204. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is October 19, 2024, with a delivery window of 102 days. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Key environmental and quality restrictions are in place, specifically prohibiting the intentional addition of mercury or the use of Class I ozone depleting chemicals. Inspection and acceptance will occur at the origin, and the contract incorporates technical and quality requirements as set forth in the DLA Master List.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

IMPELLER, FAN, AXIAL

Solicitation # SPE8E7-26-T-3633

This contract, identified by solicitation number SPE8E7-26-T-3633, is for the procurement of three axial fan impellers under National Stock Number 4140-01-421-3184. The acquisition is managed by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility. The items are required to be delivered to the New Cumberland, Pennsylvania facility with a requested ship date of February 15, 2027, and an original required delivery date of May 4, 2027. Delivery terms are set as FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including documentation for source approval requests and specific DLA packaging requirements. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 standards. Additionally, the supplier must follow specific palletization protocols and ensure that any non-accepted supplies have government identification removed. The procurement is categorized under NAICS code 333413, and all technical requirements are governed by the DLA Master List of Technical and Quality Requirements.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE8E7-26-T-3635

This contract is a solicitation for the procurement of one vaneaxial fan, designated under NSN 4140-01-300-8058, for non-nuclear applications. The equipment is specified to operate at 440 volts AC, 60 Hz, 3 phase, and single speed. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with a required delivery timeline of 167 days after order. The solicitation is categorized under NAICS code 333413, which pertains to other compressor and turbine pump manufacturing. The technical requirements heavily modify the MIL-F-18953B standard, specifically regarding coating specifications, material standards, and aerodynamic performance. Key modifications include strict requirements for zinc-molybdate primer and phenolic varnish coatings to ensure durability in air streams, as well as specific instructions for fastener materials and motor insulation temperature rises. Additionally, the contract outlines a rigorous quality assurance and testing protocol, including mandatory sequences for balance, casing tightness, performance, noise, vibration, and high-impact shock testing to ensure the unit meets all aerodynamic and structural stability standards.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-244Z

This contract, identified as solicitation SPE7MC-26-T-244Z, is for the procurement of three ball valves, specifically part number 4-10693 from Circor Aerospace, Inc., under NSN 4820-01-419-1631. The order is managed by the Department of Defense through the DDSP New Cumberland Facility, with a required delivery date of July 11, 2027. The delivery terms are FOB Origin, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes a critical prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Technical and quality requirements are governed by the DLA Master List, and the items must be delivered to the DLA Distribution center in New Cumberland, Pennsylvania, within 302 days after the order.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-4330

The contract entails the procurement of eight power supply units identified by NSN 6130-01-553-7134 and part number LT-3103-4 under solicitation SPE7L7-26-T-4330, issued as a Service-Disabled Veteran-Owned Small Business Set Aside with a NAICS code of 335931. Delivery is required within 57 days after order placement to the DDSP New Cumberland Facility in Pennsylvania, with FOB Origin terms mandating that pricing includes transportation to a contiguous U.S. destination selected by the offeror. The unit of issue is each (EA), with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, though the DLA Master List of Technical and Quality Requirements supersedes any conflicting ASTM requirements. Palletization must conform to DLA's RP001 guidelines, and all items must be prepared for shipment using the specified parcel post address. The contract includes mandatory cybersecurity compliance via CMMC Level 2 self-assessment and adherence to NIST SP 800-171 requirements for safeguarding covered defense information, with flow-down obligations to subcontractors. Hazardous materials require labeling consistent with OSHA’s Hazard Communication Standard and MIL-STD-129, while items containing radioactive materials above specified thresholds must be marked in accordance with the same standard. Quality assurance protocols mandate sampling under MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No pricing information is provided within the solicitation, and the contract value remains unestablished; however, payment will be processed exclusively through WAWF using required documentation such as invoices and receiving reports. Offerors must hold a valid Unique Entity Identifier and CAGE code, certify their SDVOSB status, and comply with all representations and certifications regarding socioeconomic eligibility, employee eligibility verification, trafficking in persons, sustainable products, and whistleblower protections. The contract prohibits the use of covered telecommunications equipment from designated foreign adversaries, restricts compensation of former DoD officials to prevent organizational conflicts of interest, and requires timely reporting of cyber incidents. All proposals must be submitted electronically via DIBBS by the stated response deadline

Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

FLANGE, GLAND, VALVE

Solicitation # SPE7MC-26-T-198V

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-26-T-236Y

Solicitation SPE7MC-26-T-236Y is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of 20 units of fluid pressure regulating valves, identified by NSN 4820015450854 and Griswold Industries part number 7194503E. The required delivery date and need ship date are both set for April 19, 2027, with a delivery lead time of 222 days after order. Shipping is FOB Destination, with the delivery point designated as the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though DLA Master List technical and quality requirements take precedence. Palletization must follow RP001 guidelines. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the successful contractor is required to use the Wide Area WorkFlow (WAWF) system for electronic invoicing and receiving reports. The procurement is subject to the Buy American Act and the Berry Amendment, and it incorporates standard FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the safeguarding of covered defense information.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS