Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Military-Grade Packaging and Preservation Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of specialized cleaning, drying, preservation, and packaging services for defense components in strict adherence to MIL-STD-129 for bar-coded labeling and MIL-STD-2073-1E for protective packaging standards, as dictated by DLA RP001. All work must ensure components are prepared for long-term storage and reliable delivery within the military supply chain, with precise compliance to federal military specifications for documentation, labeling, and environmental protection. The packaging must be fully traceable, accurately bar-coded, and structurally sound to withstand transit and storage under varying conditions. This subcontract is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance required at the location in Tracy, California, ZIP 95304-5000. The North American Industry Classification System code is 561910, indicating it falls under other support services for waste management and remediation, relevant due to the specialized industrial preservation and handling processes involved. The solicitation was posted on July 27, 2026, with responses due by July 30, 2026, indicating a tightly constrained bidding window, and all interested parties must respond through the official DIBBS portal using the provided link.

General Info

Provide military-grade cleaning, drying, preservation, and packaging per MIL-STD standards for Defense Logistics Agency in Tracy, CA.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

561910 - Packaging and Labeling ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Provide cleaning, drying, preservation, and MIL-STD-129 compliant bar-coded packaging per DLA RP001 and MIL-STD-2073-1E for defense component delivery.

Similar Contracts

Same NAICS industry code

NAICS: 561910
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract calls for the military-compliant packaging, preservation, and marking of shear bolts in full accordance with MIL-STD-2073-1E and MIL-STD-129, ensuring all items meet Department of Defense standards for handling, storage, and logistics. This includes the application of barcodes and labeling as required by the specifications, with strict adherence to durability, clarity, and traceability protocols for military supply chain operations. All work must be performed under a Total Small Business Set-Aside, classified under NAICS code 561910, meaning only small businesses are eligible to bid, promoting small business participation in defense logistics. The solicitation is issued by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026, and was posted on July 27, 2026. The contract is structured as a subcontract, indicating the winning vendor will likely provide services to a prime contractor fulfilling broader defense requirements. While the place of performance and point of contact details are not specified, full compliance with military packaging and marking standards remains the central obligation, with no deviations permitted. Bidders must possess the capability to meet exacting defense logistics requirements and ensure seamless integration of shear bolts into defense inventory and distribution systems.
ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 561910
New
Federal
Specialized Packaging and Preservation ServicesThe contract requires specialized packaging, preservation, marking, and labeling services for sensitive repair kits in full compliance with military standards to guarantee the integrity and security of shipments throughout transit. All work must adhere to stringent regulatory requirements to ensure proper handling, environmental protection, and traceability of critical components, with particular emphasis on safeguarding sensitive equipment from damage, contamination, or tampering during transport and storage. The service provider must demonstrate proven expertise in meeting federal and defense-specific packaging protocols, including the use of approved materials and methods that align with military specifications. This is a total small business set-aside under the SBA program, exclusively available to qualified small businesses, with the NAICS code 561910 indicating it is for support activities for warehousing and storage. The opportunity is issued by the Department of Homeland Security’s Sflc Procurement Branch 1 and is structured as a subcontract. Proposals must be submitted by the deadline of August 3, 2026, and performance will be conducted in an unspecified location, with no designated place of performance listed in the provided details. Interested parties must respond via the provided SAM.gov link before the deadline to be considered.
Sflc Procurement Branch 1(00080)

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, VANEThe contract pertains to the procurement of a commercial off-the-shelf washer, vane, identified by part number 2311146-1 and NSN 5310-01-602-6673, with a quantity of 14 units to be delivered FOB origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i). Sampling inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances for acceptance unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization following DLA packaging standards. Delivery is due within 171 days to the designated receive warehouse in Tracy, California, with no variance allowed in quantity. The contract does not specify a need for supplier manufacturing, but non-manufacturers must meet tailored higher-level quality requirements. Original delivery was required by June 13, 2027, though the need ship date is set for January 3, 2027. Inspection and acceptance occur at destination, and transportation logistics are aligned with DLA procedural notes C19 and C20. The procurement is under solicitation SPE4A5-26-T-280G, issued by the Department of Defense’s ASC Supplier Oper OEM Division, with Jessica Baake as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334513
New
DIBBS
SENSOR, AMBIENT TEMPThe contract pertains to the procurement of a single ambient temperature sensor with NSN 6685-01-617-1362 and part number MA412, manufactured by MicroTechnologies Inc, under solicitation SPE4A5-26-T-309R. Delivery is required within 20 days FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and identified with special marking code 05 indicating it is a delicate instrument. All packaging, preservation, and marking materials must be free of mercury or mercury compounds, as prohibited by IP056, consistent with NAVSEA 5100-003D, which also mandates that any portable fluorescent lamps or instruments containing mercury must have shockproof construction and a secondary containment barrier. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, with sampling procedures following MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Attributes are categorized with verification levels VII, IV, and II for critical, major, and minor characteristics respectively, and unspecified attributes default to major. Mercury-containing substances are strictly prohibited except in limited exempted cases like batteries, fluorescent lights, or specialized instruments as defined by NAVSEA. The contract specifies delivery to USS HIGGINS DDG 76 at FPO AP 96667 under vessel shipment protocols and requires adherence to DLA procurement packaging standards RP001. The supplier must comply with all unit of issue guidelines and use the VSM system for shipment tracking. The required delivery date is July 21, 2026, with the solicitation response deadline set for August 4, 2026, and the item falls under NAICS code 334513 for instrument manufacturing.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL INDThe contract is for a dial indicating compound pressure-vacuum gauge, identified by NSN 6685-01-520-3520, with a single unit required and a delivery timeline of 140 days from the contract award. The item must comply with technical specifications referenced in MIL-G-18997E and DI-DRPR-80651, and all quality, packaging, and inspection requirements are governed by a suite of DLA master requirements including RQ001, RQ009, RQ011, RT001, and RQ017, which mandate tailored quality controls, origin-based inspection and acceptance, proper identification marking, and certified test equipment. Sampling follows MIL-STD-1916 or ASQ H1331 with zero defect acceptance unless otherwise specified, and critical attributes are verified at the strictest levels. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking for delicate instruments and clean/dry preparation per MIL-G-18997. Delivery is FOB origin, with no quantity variance permitted, and shipping must occur via traceable freight, explicitly prohibiting parcel post. A separate first article test line item is included with one unit designated for testing; failure to quote a price for this item will result in it being assumed cost-free, and waivers may void the line item entirely. The performance address is NSWC Philadelphia Division, and the contract is managed under solicitation SPE4A5-26-T-309S with an awarded delivery date of July 21, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThis contract pertains to the procurement of rope and wire under solicitation SPE4A5-26-T-309V, with a required quantity of 497 feet, identified by NSN 4010-01-543-0823 and part number 9117-0003 from HEIL TRAILER INTERNATIONAL, LLC. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with specific referencing to RA001, RP001, RQ011, and RQ017 for packaging, identification, and removal of government markings. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise stated, and attributes are to be classified with corresponding verification levels or AQLs. Item Unique Identification is not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Packaging must comply with ASTM D3951 but is subordinate to any conflicting DLA requirements, and must be labeled per MIL-STD-129 with palletization in accordance with DLA packaging guidelines. The unit of issue is feet, as defined by DLA’s authorized standards. Delivery is FOB origin with a 165-day lead time, and the supplier must meet the original required delivery date of January 25, 2027, with a need ship date of January 17, 2027. The contract permits a 10% variance in quantity, with inspection and acceptance occurring at origin. The designated delivery point is the DLA Distribution DDSP New Cumberland Facility, with the same address serving as the freight shipping destination. Transportation logistics are governed by DLAD Proc Notes C19 and C20. All packaging and marking must reflect the specified Unit of Issue and Quantity per Unit Pack, and the contract supersedes any conflicting general standards with explicit DLA technical directives. The contracting office is under the Department of Defense, ASC Supplier Operations OEM Division, with point of contact Hien-Van Trinh available for inquiries.
Other Fabricated Wire Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
VANE ASSY, COMPR 9THThe contract is for the procurement of a Vane Assembly, Compressor 9th, identified by part number 6876109 and NSN 2835-00-555-7731, with a quantity of two units to be delivered FOB origin within five days of contract award to the General Depot of Naval Supplies in Kaohsiung, Taiwan. The item is designated as a critical application item by Rolls-Royce Corporation and requires strict compliance with technical and quality requirements listed in the DLA Master List, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Item Unique Identification is not required per the customer’s request and DFARS 252.211-7003(c)(1)(i). Packaging must meet DLA-specific standards with preservation method 10 (cooling/drying), no preservation material, and container codes E5 for both unit and intermediate containers. Marking must exclude special codes and comply with military standards without the need for hazardous or radioactive labels beyond standard compliance. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively. Mercury and mercury-containing compounds are strictly prohibited except in functional components such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. The contract incorporates multiple FAR and DFARS clauses, including cybersecurity requirements under 252.204-7012 and compliance with NIST SP 800-171 via deviation 2026-O0025, CMMC Level 2 self-assessment, and safeguarding of covered defense information. It also enforces compliance with prohibitions on hexavalent chromium, toxic materials, and acquisition of equipment from Communist Chinese military companies, along with sustainable product and employment eligibility verification requirements. Payment must be submitted via WAWF, with invoice processing governed by wide-area workflow instructions and no unauthorized obligations binding the government.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details