Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Military-Grade Packaging and Preservation Services

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of military-grade packaging and preservation services for electronic components, adhering strictly to MIL-STD-2073-1E standards for dry preservation and MIL-PRF-81705 specifications for electrostatic discharge and electromagnetic interference protection. All materials and processes must meet rigorous defense-grade requirements to ensure long-term integrity, environmental resilience, and compatibility with military storage and transport protocols. The work involves specialized handling, sealing, and packaging techniques designed to safeguard sensitive electronics against moisture, corrosion, static, and electromagnetic threats during extended periods of storage or transit. The contract is classified as a subcontract under NAICS code 385110 and is managed by the Active Devices Division within the Department of Defense. Performance is designated to take place at a facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002. Responses are due by August 14, 2026, and the opportunity was posted on August 3, 2026. Interested parties must ensure full compliance with all technical and procedural requirements outlined in the referenced military standards, as deviations will render offers noncompliant. The solicitation is accessible via the DIBBS portal for further submission details.

General Info

Military-grade packaging and preservation per MIL-STD-2073-1E and MIL-PRF-81705 for electronic components in New Cumberland, PA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

385110View NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide MIL-STD-2073-1E-compliant dry preservation and ESD/EMI protection using MIL-PRF-81705 materials for electronic components.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of military-compliant packaging, dry-air preservation, and standardized marking for valve components in accordance with MIL-STD-2073-1E and MIL-STD-129 specifications. All packaging must ensure long-term preservation against environmental degradation using dry-air (Ae) methods, and each item or unit must be clearly marked with the required data elements specified in MIL-STD-129 to enable accurate identification, tracking, and handling throughout the military supply chain. The work is classified as a subcontract under NAICS code 385110 and is being managed by DLA Dist San Joaquin under the Department of Defense, with performance obligated at the Tracy, California location with a zip code of 95304-5000. The opportunity was posted on August 3, 2026, and responses must be submitted no later than August 14, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires the performance of cleaning, drying, and packaging operations for CLAMP and LOOP units in strict accordance with MIL-STD-2073-1E and DLA RP001 standards, including the application of Preservation Method 10 to ensure long-term protection against environmental degradation. All units must be properly containerized and palletized to meet military logistics requirements, ensuring readiness for storage and transportation under rigorous conditions. The work demands precision adherence to federal specifications governing preservation and packaging to maintain operational integrity of the hardware throughout its lifecycle. This is a subcontract opportunity under a Total Small Business Set-Aside, designated by the SBA, meaning only small businesses are eligible to respond. The action falls under NAICS code 385110, which corresponds to instruments and related products manufacturing, indicating the specialized nature of the packaging services required. The solicitation was posted on August 3, 2026, with bids due by August 18, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. All performance will occur under the oversight of the DLA and must comply with all applicable defense standards without exception.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Defense Logistics Packaging and Preservation ServicesThe contract calls for comprehensive cleaning, drying, preservation, and packaging services for defense components in strict compliance with MIL-STD-129 labeling requirements. All services must ensure components are protected against corrosion, contamination, and environmental damage during storage and transit, with precise documentation and labeling adhering to military standards. The work is expected to support the Department of Defense’s strategic acquisition program, with performance likely required across multiple locations to meet operational readiness needs. This is a subcontract opportunity posted on August 3, 2026, with responses due by August 18, 2026, under NAICS code 385110 for industrial cleaning and preservation services. The contracting authority is the Strategic Acquisition Program Directorate, and the solicitation is accessible via the DIBBS system. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors capable of meeting the technical and regulatory requirements for defense-related packaging and preservation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Medical Device Packaging and Kitting ServicesThe contract requires the provision of compliant packaging, labeling, and kitting services for defibrillator electrode pads according to DLA and military medical standards, ensuring all units meet rigorous operational and regulatory requirements for use by U.S. military medical personnel. This includes assembling unit packs, creating overpacks, and properly palletizing shipments to support efficient logistics and storage in field and garrison environments, with all work must be performed in accordance with Defense Logistics Agency specifications and military medical protocols. The solicitation is issued as a subcontract under NAICS code 385110, with a response deadline of August 10, 2026, and the place of performance is designated as Fort Bragg, North Carolina, with a zip code of 28310. The contracting activity is tied to the Department of Defense’s Medical Supply Chain MD Surg FSF, indicating the work directly supports military medical readiness. The solicitation is accessible through the DIBBS system, and while no set-asides or point of contact details are specified, strict adherence to packaging, labeling, and logistics standards is mandatory for compliance.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires the provision of military-compliant packaging, preservation, and labeling of hazardous materials in strict adherence to MIL-STD-2073-1E and Defense Logistics Agency standards, with full documentation and hazard communication protocols to ensure safety and regulatory compliance. All work must align with the technical and procedural mandates for handling dangerous goods within defense logistics systems, including accurate labeling, preservation methods suitable for long-term storage and transport, and complete recordkeeping to support inspection and audit readiness. This is a subcontract opportunity under NAICS code 385110, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 3, 2026, and responses are due by August 11, 2026. Interested parties must comply with all DLA requirements and be prepared to demonstrate capability in handling hazardous materials under military specifications, with an emphasis on conformity, traceability, and safety throughout the packaging and labeling lifecycle.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires compliance with MIL-STD-129 and DLA RP001 standards for the packaging, labeling, and palletization of military-grade materials, ensuring all items are properly prepared for government logistics and distribution. Hazard communication must adhere to OSHA standards, meaning all hazardous materials must be clearly marked, labeled, and accompanied by appropriate documentation to ensure safety and regulatory compliance throughout the supply chain. The work must be performed to exact specifications for identification, marking, and unit configuration to meet Department of Defense requirements. The solicitation, issued by the Fluid Handling Division under the Department of Defense, is classified as a subcontract with a NAICS code of 385110, indicating it pertains to packaging and containers manufacturing. Performance is designated for New Cumberland, Pennsylvania, with the ZIP code 17070-5002 specified as the official place of performance. The response deadline is August 13, 2026, and the solicitation was posted on August 2, 2026, providing potential bidders a 11-day window to submit proposals through the DIBBS platform using the reference number SPE7M426T297X. There is no set-aside type indicated, meaning the contract is open to all eligible subcontractors regardless of business size or ownership status.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires qualified small businesses to provide comprehensive packaging, preservation, cleaning, and barcoding services for fasteners in full compliance with military standards, supporting DLA Logistics Integration. All work must meet strict military specifications to ensure the integrity, longevity, and traceability of fasteners throughout their supply chain lifecycle. This is a total small business set-aside under SBA guidelines, exclusively open to small business concerns as defined by the Small Business Administration, with the North American Industry Classification System code 385110 applying to the work scope. The solicitation is managed by the ASC Commodities Division under the Department of Defense and is open for responses until August 17, 2026. Performance will occur at locations designated by the government, with all submissions required through the DIBBS system via the provided UI link.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging and Marking Services for Military ShipmentThe contract requires certified packaging and marking services for Towbar Wheels in full compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet Department of Defense acceptance criteria. This includes proper shelf-life coding, palletization, and labeling procedures to guarantee traceability, durability, and uniformity throughout the supply chain. The work must adhere to strict military specifications for handling, storage, and shipment readiness, with all documentation and physical markings accurately applied to satisfy DLA requirements. This is a small business set-aside subcontract under NAICS code 385110, reserved exclusively for small businesses as defined by the SBA. The solicitation was posted on August 2, 2026, with responses due by August 5, 2026. The contracting activity falls under the Department of Defense, specifically the Construction & Equipment Manufacture & Con organization, though the exact place of performance and point of contact are unspecified. Bidders must ensure full regulatory compliance and operational readiness to meet the tight turnaround, with all work intended to support military logistics and procurement workflows.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

in about 11 hours

Military-Compliant Packaging and Palletization ServicesThe contract mandates the packaging and palletizing of LED components in full compliance with military specifications, requiring adherence to rigorous preservation techniques to ensure product integrity during storage and transport. All procedures must align with Defense Logistics Agency and federal labeling standards, ensuring traceability, durability, and compliance with government-mandated documentation protocols. The work is to be performed at the designated place of performance in Albany, Georgia, with strict attention to quality control and documentation throughout the process. This subcontract, issued by the Active Devices Division under the Department of Defense, is solicited under NAICS code 385110 and requires responses by August 13, 2026. While no set-aside designation is specified, participation is open to qualified subcontractors capable of meeting the stringent military packaging and labeling requirements. All deliverables must be verified to ensure conformance with federal directives, and performance is subject to inspection and audit per DOD contractual obligations.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Medical Item Packaging and Marking ServicesThe contract requires the performance of military-standard packaging, preservation, and marking services for medical supplies, with specific emphasis on accurate barcoding and secure storage labeling to ensure compliance with defense logistics requirements. All work must meet stringent military specifications to maintain the integrity, traceability, and readiness of medical items throughout the supply chain, particularly in deployment and field conditions. The place of performance is designated as Fort Hood, Texas, with a zip code of 76544, indicating that operations will be conducted at or near this military installation. This is a subcontract opportunity under the NAICS code 385110, which corresponds to medical equipment and supplies manufacturing, and is managed by the Department of Defense through the Medical Supply Chain MD SURG FSF. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is accessible through the DIBBS portal. Contractors must be prepared to align with federal defense standards, demonstrate capability in military-grade packaging protocols, and ensure full traceability of medical items through standardized labeling and documentation processes.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Defense Packaging & Labeling ServicesThe contract requires compliant packaging, preservation, and labeling of fasteners in accordance with military standards to ensure integrity and readiness during storage and transit. All deliverables must meet defined defense specifications to support logistical and operational requirements, with strict adherence to handling procedures for fasteners intended for military use. The place of performance is established at FPO 09569, indicating delivery to a military postal address, likely for overseas or deployment-bound supply chains. This is a subcontract under the Department of Defense’s ASC Commodities Division, classified under NAICS code 385110, which pertains to other miscellaneous durable goods merchant wholesalers. The solicitation opened on August 2, 2026, with a response deadline of August 10, 2026, and is accessible through the DLA DIBBS platform. Failure to meet packaging and labeling requirements will result in non-compliance, potentially leading to rejection of delivery, cost adjustments, or termination of performance. The contract emphasizes quality control and standardization across all phases of preparation to ensure seamless integration into military supply systems.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Packaging, Labeling, and Compliance Services for DLA ShipmentThe contract requires the provision of commercial packaging, preservation, palletization, and federal-compliant labeling services tailored for delivery to the Defense Logistics Agency. All labeling must adhere strictly to MIL-STD-129 and MMS No. 1 standards, incorporating 2D Data Matrix barcoding to ensure accurate tracking and inventory management throughout the military supply chain. Services must be performed to meet exacting U.S. Department of Defense specifications for readiness, traceability, and operational compliance. Performance is anchored at Fort Bliss, Texas, with the work classified as a subcontract under NAICS code 385110, reflecting activity in packaging and labeling services. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026. The agency sponsoring the requirement is the Medical Supply Chain FSH under the Department of Defense, indicating the goods involved pertain to medical equipment or supplies. Contractors must ensure full alignment with federal logistics protocols to support DLA’s mission of timely, secure, and auditable delivery of critical supplies.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

RESISTOR, FIXED, WIRE

Solicitation # SPE7M5-26-T-367E

This contract specifies the procurement of a fixed wire resistor with part number RER55F36R5R and NSN 5905-01-134-1187, meeting technical specifications MIL-PRF-39009/2C and MIL-PRF-39009E, both dated August 5, 2022. The item is classified as a critical application component, and all manufacturing, testing, and processing procedures are prohibited from using Class I ozone-depleting substances unless explicit written approval is obtained from the Contracting Officer. The resistor must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific lead finish labeling in accordance with IPC/JEDEC J-STD-609, which mandates clear identification of lead content on every unit package. Delivery is required within ten days of contract award, with FOB origin terms, zero quantity variance, and inspection and acceptance occurring at the destination. The sole quantity ordered is one unit, shipped via traceable freight methods excluding parcel post to the designated military address at Fort Benning, Georgia. All performance, material, and marking requirements are governed by referenced military specifications and DLA master lists, with no exceptions permitted unless formally approved.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONNECTOR BODY, RECE

Solicitation # SPE7M5-26-T-367P

This contract specifies the procurement of a connector body receptacle with part number 5935-00-892-3059, requiring one unit to be delivered within 20 days to the destination FPO AE 09578 aboard the USS McFaul DDG74. The item is classified as a critical application and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The use of ozone-depleting substances is strictly prohibited in all manufacturing and processing stages unless explicit written approval from the contracting officer is obtained, and mercury or mercury-containing compounds are banned from direct contact with the hardware except in limited, specially defined cases such as functional mercury in batteries or fluorescent lights, which must include a secondary containment boundary. Compliance with MIL-STD-1916 or equivalent zero-based sampling plans is required for inspection, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively or corresponding AQLs, and acceptance must result in zero non-conformances unless otherwise stated. Packaging, marking, and preservation must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-55330, with special marking code 00-00 indicating no additional requirements. The delivery is FOB destination with no quantity variance permitted, and inspection and acceptance occur upon receipt at the destination. The contract also mandates adherence to Department of Defense transportation protocols, including specific procedures for vessel and DLA vendor shipments, and includes designated government-use fields for tracking and logistics compliance.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367F

The contract specifies the procurement of three electrical cover units with NSN 5935-01-534-4832 and part number 660-012NF15U6-106, under solicitation SPE7M5-26-T-367F, with a required delivery within 20 days of award. The item is to be delivered FOB destination, with no tolerance for quantity variance, and inspected and accepted at the delivery point. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. If the item is not classified as hazardous per FED-STD-313, it must be commercially packaged per SPE7M5-26-T-367F and palletized per RP001 requirements. Government identification must be removed from non-accepted supplies, and all items must be physically identified per RQ017. Delivery is directed to MALS-12 at MCAS Iwakuni, Japan, with a secondary parcel post address at FPO AP 96310-7161. Transportation logistics follow DLAD Proc Note C19 for vessel shipment and C20 for first destination transport. The original required delivery date is July 30, 2026, and the contract is issued under a federal solicitation managed by the Department of Defense’s Active Devices Division with point of contact Margaret Smith.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

RADOME, POLARIZER

Solicitation # SPE7M5-26-Q-0829

The contract is for the procurement of 12 units of a RADOME, POLARIZER with NSN/Part Number 5985-01-157-5180 under solicitation SPE7M5-26-Q-0829, which is a total small business set-aside under NAICS code 334220. The offering is issued by the Department of Defense’s Active Devices Division, with a response deadline of August 19, 2026, and requires delivery within 463 days after order. The technical and quality requirements governing this acquisition are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable version determined by the solicitation or award date depending on acquisition size. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and mandates compliance with DFARS 252.225-7048. Access to the controlled technical data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been approved by DLA. Configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. The contract also mandates CMMC Level 2 certification from third-party assessment organizations for cybersecurity compliance and incorporates DLA packaging standards for procurement.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-367K

The contract pertains to the procurement of twelve antennas under NSN 5985-99-671-2175, with a delivery requirement of 234 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision active on the RFP issue date unless amended. Alternate offerors must submit a complete data package including documentation for both the approved and alternate parts. The solicitation numbers SPE7M5-26-T-367K was posted on August 4, 2026, with responses due by August 17, 2026, under NAICS code 334220, and is managed by the Department of Defense’s Active Devices Division. The point of contact is Matthew Stanko, reachable at fmtewiq@dla.mil or 312-850-7245, and performance is to occur in New Cumberland, Pennsylvania, 17070-5002.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-367D

This contract is for the procurement of one cartridge fuse, identified by NSN 5920-01-368-3718 and commercial part numbers JJN-60 from Cooper Bussmann, LLC and 128311013 from Eaton Corporation, categorized as a commercial off-the-shelf item. The requirement is governed by DLA packaging standards under MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required and packaging configured for dry storage without cushioning or intermediate containers. Delivery is due within 20 days from the contract date, FOB origin, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be shipped to the designated military logistic site in Soto Cano, Honduras, and is subject to DLA transport protocols, including procurement notes C19 and C20 for freight handling. The procurement is issued under solicitation SPE7M5-26-T-367D, with a response deadline of August 17, 2026, and a required delivery date of July 30, 2026. Technical and quality requirements referenced via R and I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. The unit of issue is each, priced at $1.00, totaling $1.00 for the single unit. The point of contact is Matthew Stanko, and the solicitation is managed by the Department of Defense’s Active Devices Division. Government-use identifiers and logistical codes are embedded in the shipment data, and the item must comply with all hazardous materials transportation guidelines as outlined in DLA procedural notes, despite not being classified as hazardous.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SEMICONDUCTOR DEVICE, T

Solicitation # SPE7M5-26-T-366Y

The contract specifies the procurement of a semiconductor device, specifically a thyristor, identified by NSN 5961-01-480-5281, with a quantity of two units. The item is classified as a commercial off the shelf product, and the procurement is governed by stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The supplier must comply with qualified suppliers and testing lists for Federal Supply Class 5961 and 5962, as defined in Procurement Note M01, and adhere to physical marking standards for bare items. Packaging must meet DLA-specific requirements, and the contractor is obligated to retain full supply chain traceability documentation as mandated by DLAD Procurement Note C03 from August 2016. Additionally, government identification must be removed from any non-accepted supplies. The solicitation is issued under SPE7M5-26-T-366Y, with a response deadline of August 17, 2026, and delivery is required within 20 days after award. The place of performance is Keyport, WA, and the contracting office is the Department of Defense's Active Devices Division, with Margaret Smith as the primary point of contact.

Semiconductor and Related Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

COVER, ELECTRICAL CO

Solicitation # SPE7M5-26-T-367G

This contract involves the procurement of a cover for an electrical connector with part number 660-012NF21U6-208 and NSN 5935-01-549-5224, for a quantity of four units at a unit price of four dollars, totaling sixteen dollars. Delivery is required within twenty days to the destination FPO AP 96310-7161 under FOB destination terms, with no tolerance for quantity variance. The item must comply with strict packaging and preservation standards as defined by MIL-STD-2073-1E and MIL-DTL-55330 for connectors, and marking must conform to MIL-STD-129 with no special marking code. All packaging and palletization must meet DLA’s procurement requirements, and the use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless written approval is secured from the contracting officer—a restriction that overrides any conflicting specification but does not lessen performance obligations. The item is subject to inspection and acceptance at the delivery point, and transportation logistics follow specific DLA procedural notes C19 and C20. The solicitation number is SPE7M5-26-T-367G, issued by the Department of Defense’s Active Devices Division, with a response deadline of August 17, 2026, and an original required delivery date of July 30, 2026. Technical and quality requirements referenced under R or I numbers are governed by the DLA Master List, and the applicable revision depends on whether it is a simplified or large acquisition as defined by solicitation and award timelines.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-26-Q-0830

The contract is for the procurement of three electrical plug connectors identified by NSN 5935-01-374-7034 and part number M83723/86W2028N, conforming to MIL-DTL-83723H Rev H and MIL-DTL-83723/86E Rev E specifications dated January and March 2024 respectively. This is a qualified item requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, and all technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence. The product is designated as a critical application item and must not contain any Class I ozone-depleting chemicals, with any substitute chemicals requiring prior approval. All items must be marked and labeled per MIL-STD-129, packaged in accordance with DLA packaging standards RP001, and shipped commercially per ASTM D3951 unless classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. Palletization must follow RP001 guidelines, and the unit of issue is each, with zero variance allowed in quantity. Delivery is required within 90 days after award, with FOB origin terms and inspection and acceptance occurring at destination. The shipping address is the DLA Distribution facility in New Cumberland, Pennsylvania and the contract is managed by the Department of Defense’s Active Devices Division with Andrew Bracken as the primary point of contact. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, and the material is needed by March 19, 2027.

Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

CLAMP, CABLE, ELECTRI

Solicitation # SPE7M5-26-T-366W

The contract pertains to the procurement of two electrical cable clamps with part number 620FS003NF10 and NSN 5935-01-624-8720, supplied by Glenair, Inc. Delivery is required within 20 days to RAF Lakenheath, United Kingdom, under FOB origin terms with no tolerance for quantity variance. The items must comply with MIL-STD-2073-1E packaging standards and be marked in accordance with MIL-STD-129, without any special marking codes. Packaging must adhere to DLA packaging requirements, and the use of any Class I ozone-depleting substances in manufacturing or processing is strictly prohibited unless explicit written approval is obtained from the contracting officer; this restriction does not apply to commercial items as defined by FAR 11.001. Inspection and acceptance occur at the destination, and the shipment must follow DLA transport procedures noted in C19 and C20 with aRDD identifier of 777. The contract references the DLA Master List of Technical and Quality Requirements, with compliance governed by the version in effect on the solicitation issue date. The unit of issue is each, priced at $2.00 per unit, totaling $4.00 for the order. The solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Active Devices Division through Margaret Smith, with the primary point of contact provided.

Other Building Material Dealers

POSTED

about 13 hours ago

DEADLINE

SWITCH, SEQUENCING

Solicitation # SPE7M5-26-T-367L

This contract solicitation, identified by SPE7M5-26-T-367L, is for 185 units of SWITCH, SEQUENCING with NSN 5930-00-246-9757, under a Women-Owned Small Business Set-Aside, and requires delivery within 93 days after order. Mandatory source inspection must occur at the manufacturer’s facility, and surplus materials are not acceptable. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item must conform to both the cited technical data and the specified part number, and vendor control drawings apply. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with supplied hardware, except in specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in compliance with NAVSEA 5100-003D. The contract mandates CMMC Level 2 certification by a third-party assessment organization for cybersecurity compliance. Technical data associated with this item is subject to export controls under ITAR or EAR, requiring prior governmental authorization for any disclosure to foreign persons, regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and formal DLA authorization may access restricted technical data. The contract is managed by the Department of Defense’s Active Devices Division, with performance to be delivered to Jacksonville, Florida, and inquiries directed to Lea Dawn Robertson.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M5-26-T-366U

This contract pertains to the procurement of electrical contacts identified by NSN 5999-01-457-0915 and part number Molex LLC 1UX99 P/N 16-02-0117, with a quantity of 24 units to be delivered within 20 days under solicitation SPE7M5-26-T-366U. The items must be furnished in strict compliance with DLA packaging standards, including MIL-STD-2073-1E and MIL-STD-129 for marking, and must not contain mercury or mercury compounds unless specifically exempted for functional uses such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA. Any exempted mercury-containing devices must include a secondary containment to prevent leakage and meet NAVSEA 5100-003D requirements. Packaging and shipping instructions specify that delivery must be FOB origin, inspected at destination, and shipped via the fastest traceable method without parcel post, with freight directed to the Naval Station Newport address and a separate parcel post address for administrative purposes. The contract enforces zero variance in quantity, requires adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and includes detailed packaging codes, containment methods, and special handling directives. The required delivery date is July 31, 2026, with the solicitation issued on August 4, 2026 and responses due by August 17, 2026, under a federal procurement framework governed by the Department of Defense and managed by the Active Devices Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE