Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Military Packaging and Marking Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 488410
New
Federal
Precision Instrument Freight and Packaging Services
Brookhaven National Labor -Doe Contractor

POSTED

about 19 hours ago

DEADLINE

in 15 days
NAICS: 488410
New
Federal
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves the physical identification and specialized packaging of Inertial Measurement Units to ensure they are ready for military transport. All deliverables must adhere to strict military standards, specifically applying markings per MIL-STD-129 and executing packaging per MIL-STD-2073 using moisture-barrier, shock-absorbent, and anti-static materials. The contractor is responsible for preparing shipments for FOB Destination delivery to DLA Distribution facilities. This opportunity falls under NAICS code 488410, with a response deadline set for November 9, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 488410
New
DIBBS
Specialized Aerospace Packaging and Shipping
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 488410
New
Federal
MIL-SPEC Aerospace Packaging and CratingThis subcontract for MIL-SPEC Aerospace Packaging and Crating supports prime contractors on DLA Aviation projects through the Department of Defense. The scope of work involves providing specialized preservation, packaging, and marking services, specifically including the fabrication of Level A and B exterior shipping containers and the application of military marking labels. A primary deliverable is the provision of a fully packed, marked, and palletized rudder available for FOB Origin pickup. To ensure aerospace quality and safety, all work must adhere to strict regulatory standards, including MIL-STD-129, MIL-STD-2073-1, ASTM D3951-18, ANSI/ESD S20.20-2021, and MIL-STD-147, with a specific requirement for ESD protection. The opportunity is managed by the Pa DLA Aviation office in Philadelphia under NAICS code 488410, with a response deadline set for October 19, 2026.
Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

in 11 days
NAICS: 488410
New
Federal
Military Preservation and Packaging ServicesThis subcontract for Military Preservation and Packaging Services supports prime contractors on DLA Mechanicsburg projects for the US Navy. The scope of work involves the specialized preservation, packing, and marking of Circuit Card Assemblies (CCAs) in strict accordance with MIL-STD-2073-1, specifically utilizing MOP codes WM, CUD, CT, and UC. To ensure equipment integrity, the provider must employ military-grade crates, moisture barrier bags, and anti-static bagging. The contractor is responsible for the final marking of all items prior to shipment to DLA Distribution DDSD New Cumberland. This effort is managed under the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, with the project falling under NAICS code 488410.
SPRMM1 DLA Mechanicsburg

POSTED

about 19 hours ago

DEADLINE

in 3 months
NAICS: 488410
New
Federal
MIL-STD-2073 Compliant Packaging ServicesThis subcontract involves providing specialized packaging materials and services for prime contractors supporting Navsup Weapon Systems Support Philadelphia projects. The scope of work focuses on the preparation of repaired receivers, requiring the use of barrier bags and 1.5 inch cushioning to ensure equipment protection. All deliverables must adhere to strict military standards, specifically MIL-STD-2073 for packaging and MIL-STD-130 and MIL-STD-129 for container marking. The contractor is responsible for delivering fully packaged and marked units that are ready for FOB Destination shipment.
Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 488410
New
Federal
MIL-SPEC Packaging and Marking for Hazardous MaterialsThis subcontract involves providing preservation, packaging, packing, and marking services for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work specifically focuses on the handling of hazardous materials, requiring the use of HAZMAT-certified containers and industrial marking equipment to ensure compliance with MIL-STD-2073 and MIL-STD-129 standards. The primary objective is the delivery of properly packed and preserved Surface Sealer prepared for FOB Destination shipment. The project is managed under the Department of Defense with a NAICS code of 488410. Qualified providers must possess HAZMAT shipping certification to perform the required tasks. The solicitation was posted on October 8, 2026, with a response deadline set for November 9, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Marking Services
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Marking Services
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 488410
New
Federal
Military Preservation and Packaging ServicesThis subcontract for Military Preservation and Packaging Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves specialized preservation, packaging, and marking of items to ensure they are ready for military distribution or immediate use. All activities must adhere to strict regulatory standards, specifically MIL-STD-2073-1 for packaging, MIL-STD-129 and MIL-STD-130 for markings and labels, and ASTM D3951-18 for immediate use requirements. The contractor is responsible for utilizing vapor barriers, desiccants, and specialized crates to deliver fully preserved shipping containers on an FOB Destination basis. Performance for this contract will take place in Panama City Beach. Interested parties should note the response deadline of November 6, 2026, for this opportunity categorized under NAICS code 488410.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in 29 days
NAICS: 488410
New
Federal
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves performing specialized military-grade packaging and marking, specifically requiring adherence to MIL-STD-2073-1, Appendix D for kit packaging and MIL-STD-129 for shipment marking. The contractor must utilize industrial labeling equipment along with MIL-SPEC cushioning and moisture barriers to ensure all kits are ready for FOB Destination shipment. Additional requirements include the application of GHS compliant labels and Safety Data Sheets for all hazardous materials. This opportunity falls under NAICS code 488410 and was posted on October 8, 2026, with a response deadline of November 12, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

in about 1 month
NAICS: 488410
New
Federal
MIL-STD-2073 Compliant Packaging and Shipping
SPRMM1 DLA Mechanicsburg

POSTED

about 19 hours ago

DEADLINE

in 25 days

AI Contract Overview

Show more

This subcontract for Military Packaging and Marking Services supports prime contractors delivering supply contracts to the Department of Defense Land Supply Chain. The service provider is responsible for performing specialized packaging and marking of items to ensure they are prepared for military acceptance and storage. All work must strictly adhere to MIL-STD-2073-1E for packaging materials and procedures, and MIL-STD-129 for shipment marking. The contractor must apply preservation and wrapping materials as specified by packaging data, specifically following CLNG/DRY:1 requirements. This opportunity falls under NAICS code 488410 and was posted on August 26, 2026, with a response deadline of September 8, 2026.

General Info

Subcontract for military packaging and marking services adhering to MIL-STD-2073-1E and MIL-STD-129 standards.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

488410 - Motor Vehicle Towing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-T-03H0.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLUG, PROTECTIVE, DUST A

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs specialized packaging and marking for prime contractors delivering DLA supply contracts. Prepares items for delivery according to MIL-STD-2073-1E and marks shipments in accordance with MIL-STD-129. Applies preservation and wrapping materials as indicated by packaging data (CLNG/DRY:1). Uses packaging materials compliant with MIL-STD-2073-1E. Delivers a shipment packaged and labeled for military acceptance and storage.

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 488510
New
DIBBS
MIL-STD Defense Packaging and Shipping ServicesThe MIL-STD Defense Packaging and Shipping Services subcontract, issued by the Department of Defense Land Supply Chain, requires specialized packaging and marking for prime contractors delivering hardware to DLA Distribution New Cumberland. The contractor must ensure all shipments are ready for FOB Origin transit, utilizing MIL-SPEC materials and compliant labeling equipment. Compliance is mandatory across several standards, including MIL-STD-129, RP001, and ASTM D3951 for non-hazardous materials, while hazardous materials must adhere to TQ requirement IP025 and FED-STD-313. This performance takes place in New Cumberland, Pennsylvania, under NAICS code 488510, with a response deadline of October 13, 2026.
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332710
New
DIBBS
Mounting Bracket Manufacturing (NSN 5340123566987)This subcontract involves the manufacture and supply of three finished mounting brackets for prime contractors supporting Department of Defense Land Supply Chain projects. The fabrication process must strictly adhere to the technical data packages for NSN 5340123566987 and the DLA Master List of Technical and Quality Requirements RA001. To ensure compliance, the provider must utilize precision machining equipment and source materials that meet the standards of the Buy American Act and the Berry Amendment. The project falls under NAICS code 332710 and is managed by the Land Supply Chain agency. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the posting date of October 7, 2026, with a response deadline set for October 13, 2026.
Machine Shops

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
CLAMP, BLOCK, SECTION
Solicitation # SPE7L1-26-T-15N7
Solicitation SPE7L1-26-T-15N7 is a fixed-price request for quotation issued by the DLA Land and Maritime Land Supply Chain for one unit of a Clamp, Block, Section (NSN 5340-01-555-8546). The item must be manufactured in accordance with Technical Data Package Rev A Gen 1, specifically Basic Drawing 19207 12441887 Revision C. Delivery is required by September 21, 2026, to the US Army SSA Powidz AB in Poland, with a delivery lead time of five days after order. Inspection and acceptance will occur at the origin, and a Certificate of Conformance per FAR 52.246-15 is authorized. The contractor must adhere to strict quality and environmental standards, including ISO 9001:2015 or equivalent and SAE AS9100 higher-level quality requirements. The use of Class I ozone-depleting chemicals is prohibited. Packaging must comply with MIL-STD-129 and RP001, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Domestic sourcing preferences apply under the Buy American Act and the Berry Amendment.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L1-26-T-247Y
Solicitation SPE7L1-26-T-247Y is a federal procurement issued by the Defense Logistics Agency Land Supply Chain for the acquisition of three mounting brackets, identified by NSN 5340123566987. The contract is categorized under NAICS 332510 and requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date and need ship date are both set for August 28, 2026, with a delivery period of 143 days after order. Shipping is established as FOB Origin, while both inspection and acceptance will occur at the destination per FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-129 and RP001, with non-hazardous materials following ASTM D3951 and hazardous materials following TQ requirement IP025. Technical and quality requirements are governed by the DLA Master List. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information and NIST SP 800-171 assessment requirements, as well as adherence to the Buy American Act and the Berry Amendment for domestic sourcing.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333618
New
DIBBS
BOX, AIR, FAN
Solicitation # SPE7L1-26-T-15N2
Solicitation SPE7L1-26-T-15N2 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of two fan air boxes. The required items are identified by NSN 2940016974744 and part number RS2246037 from General Dynamics Robotic Systems Inc. Delivery is required within 20 days after order, with an original required delivery date of September 18, 2026. The items are to be delivered FOB Origin to Fort Leonard Wood, Missouri, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Environmental restrictions prohibit the use of Class I Ozone Depleting Chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding the safeguarding of covered defense information, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MULTIPLE ANGLE
Solicitation # SPE7L1-26-T-11Z5
Solicitation SPE7L1-26-T-11Z5, issued by the DLA Land and Maritime Land Supply Chain, seeks quotes for 10 units of Multiple Angle Brackets, identified as L3Harris Technologies, Inc. part number 11496-1506-01 and NSN 5340-01-735-0438. The requirement falls under NAICS code 332510. The items are defined by Army drawings and may require chemical agent resistant coatings per DCSC drawing 16236 CS-2300-0001. The required delivery date is March 21, 2027, with a delivery lead time of 176 days after receipt of order. Shipping is FOB Origin, and the destination for inspection and acceptance is DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-129 for marking and RP001 for DLA packaging requirements. It prohibits the use of Class I ozone-depleting chemicals and restricts the use of additive manufacturing unless specifically authorized. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding safeguarding covered defense information. Payment and receiving reports must be processed electronically via Wide Area WorkFlow. Quotes must be submitted through the DIBBS portal by September 25, 2026.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
ANODE, CORROSION PREVEN
Solicitation # SPE7L1-26-T-17N5
Solicitation SPE7L1-26-T-17N5 is a fixed-price Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 10 corrosion preventive anodes, NSN 5340016917061. The procurement falls under NAICS code 332510 and requires delivery to the DLA Distribution New Cumberland facility in Pennsylvania. Quotes must be submitted electronically by October 5, 2026. Approved sources for this item include specific part numbers from 6Y128 and 96169. Delivery is required within 168 days, with a need ship date of March 23, 2027, and FOB terms set as Origin. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Because the items may be hazardous, contractors must provide Material Safety Data Sheets and label containers according to the Hazard Communication Standard. Compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity regulations for safeguarding covered defense information is required. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333618
New
DIBBS
BOX, AIR, FAN
Solicitation # SPE7L1-26-T-12R1
Solicitation SPE7L1-26-T-12R1 is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of three units of fan air boxes, identified by NSN 2940-01-697-4744 and part number RS2246037. The requirement falls under NAICS code 333618 and specifies a delivery timeframe of 20 days after receipt of order. Shipping is established as FOB Origin, with delivery to Fort Leonard Wood, Missouri, via the fastest traceable means, explicitly prohibiting the use of parcel post. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements and RP001 palletization standards taking precedence. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding combating trafficking in persons, safeguarding covered defense information, and the Buy American Act. Quotations must be submitted through the DIBBS portal by September 28, 2026.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 336390
New
DIBBS
MIRROR HEAD, VEHICULAR
Solicitation # SPE7L1-26-U-0784
Solicitation SPE7L1-26-U-0784 is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of vehicular mirror heads, identified by NSN 2540015071963 and part number 610290. This is a total small business set-aside that may result in a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD. The estimated annual quantity is 130 units, with a guaranteed contract minimum of 19 units and a minimum delivery order quantity of 32 units. Delivery is required within 116 days after receipt of order, with FOB, inspection, and acceptance all occurring at the destination. The contract mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and RP001, and prohibits the use of additive manufacturing unless explicitly authorized. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Hazardous materials must be labeled according to the Hazard Communication Standard. Quotations are to be submitted via the DIBBS portal by the deadline of October 7, 2026.
Other Motor Vehicle Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333618
New
DIBBS
FILTER ELEMENT, INTAKE
Solicitation # SPE7L1-26-T-17R3
Solicitation SPE7L1-26-T-17R3 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of 233 intake air cleaner filter elements under NSN 2940-01-724-3509. The contract requires delivery within 154 days after order, with a need ship date of March 9, 2027, and shipping terms established as FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The procurement is subject to strict technical and security requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls, requiring offerors to hold an approved US/Canada Joint Certification Program certification. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment for domestic sourcing and provides a price evaluation preference for certified HUBZone small businesses. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333618
New
DIBBS
FILTER, FLUID
Solicitation # SPE7L1-26-U-0782
Solicitation SPE7L1-26-U-0782 is a request for quotations issued by DLA Land and Maritime for the procurement of fluid filters, identified by NSN 2940123610039 and part number 0020922101. This requirement is designated as a total small business set-aside under NAICS code 333618. The government intends to award a unilateral Simplified Indefinite-Delivery Contract for a one-year period with a maximum contract value of 350,000.00 dollars. The estimated annual quantity is two units, with a required delivery timeline of 62 days after order. The contract specifies that items must be packaged according to ASTM D3951 and marked and labeled in accordance with MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must comply with RP001. Inspection and acceptance will occur at the destination. The contractor is required to use Wide Area WorkFlow for electronic invoicing and payment requests. Special restrictions include a prohibition on the use of Class I ozone depleting chemicals and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information.
Other Engine Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
Supply of Handwheel (NSN 5340017327520)This subcontract through the Department of Defense Land Supply Chain requires the manufacture or procurement of one handwheel conforming strictly to NSN 5340017327520 specifications. The item is to be delivered FOB Origin to the Electric Boat Corporation located in Westerly, Connecticut, with the place of performance noted in North Stonington. Eligible contractors must possess a valid CAGE code and demonstrate full compliance with NIST SP 800-171 and DFARS 252.204-7012 cybersecurity standards. The opportunity falls under NAICS code 332999, with a response deadline set for October 9, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

3 days ago

DEADLINE

in about 10 hours
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS