Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Military Packaging and Preservation Services

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution of military packaging and preservation services in full compliance with MIL-STD-2073-1E standards, specifically utilizing Preservation Method 10 and Unit Container D3. This involves the selection of approved materials and the validation of all packaging processes to ensure long-term protection of defense equipment against environmental degradation during storage and transport. All work must meet rigorous quality and consistency benchmarks, with documented evidence of process control and material suitability to guarantee readiness and reliability under operational conditions. This is a total small business set-aside subcontract under the NAICS code 385990, administered by the Department of Defense through LSO Combat Vehicles and Armament. The performance location is in New Cumberland, Pennsylvania, with a response deadline of August 3, 2026. The solicitation is open to qualified small businesses and emphasizes strict adherence to federal military standards for packaging and preservation, with no flexibility in methodology or material specifications. Successful bidders must demonstrate capability in both technical compliance and operational execution within the defined timeframe.

General Info

Small business set-aside for MIL-STD-2073-1E Method 10 and D3 packaging in New Cumberland, PA by August 3, 2026.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

385990View NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Execution of MIL-STD-2073-1E compliant packaging using Preservation Method 10 and Unit Container D3, including material selection and process validation.

Similar Contracts

Same NAICS industry code

Packaging and Preservation ServicesThe contract entails packaging and preservation services for printers in strict compliance with DLA standards and MIL-STD-129, requiring the use of desiccants, vapor corrosion inhibitors, and proper sealing techniques to ensure long-term protection against environmental damage. All palletizing and preservation activities must meet military-grade requirements to maintain the integrity of the equipment during storage and transit. The work is to be performed at Tinker Air Force Base with a ZIP code of 73145-9031, and the North American Industry Classification System code is 385990, indicating specialized packaging and preservation services. The solicitation is classified as a subcontract under the Department of Defense, specifically managed by the Construction & Equipment T & IFO EQ office. Proposals must be submitted by August 10, 2026, with the opportunity posted on July 28, 2026, through the DIBBS platform for federal contracting.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Military-Compliant Packaging and Preservation ServicesThe contract requires full compliance with MIL-STD-2073-1E for the packaging, preservation, and containerization of electronic components, encompassing critical processes such as cleaning, drying, and the preparation of Unit Container Type D3 to ensure long-term protection and readiness under military standards. All work must be performed to exacting specifications that guarantee environmental and mechanical integrity throughout storage and transit, with strict adherence to military-grade preservation protocols for sensitive electronics. The service is being procured as a subcontract under the Department of Defense, specifically through the ACTIVE DEVICES DIVISION, with performance required at the designated location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with the NAICS code 385990 indicating a focus on other electronic component manufacturing services. The nature of the work demands precise execution, qualified personnel, and documented compliance to meet defense logistics requirements without deviation.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThe contract requires comprehensive packaging, labeling, and palletization services for pneumatic brake valves in strict compliance with Department of Defense and Defense Logistics Agency standards, including MIL-STD-129 and RP001. All work must meet military-grade specifications to ensure durability, traceability, and readiness for deployment in operational environments. The effort is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses certified by the Small Business Administration, with the North American Industry Classification System code 385990 indicating it falls under Other Miscellaneous Manufacturing. The solicitation was posted on July 28, 2026, and responses are due by August 12, 2026, with performance expected to support the LSO Combat Vehicles and Armament division within the Department of Defense.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Packaging and Marking Compliance Services

FLUID HANDLING DIVISION

POSTED

DEADLINE

Defense Logistics Agency (DLA) Packaging & Preservation ServicesThe contract requires the performance or certification of military-compliant packaging, preservation, and marking of springs in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet Department of Defense specifications for durability, traceability, and readiness. Work must be completed to support military supply chain requirements, with all procedures documented and validated to maintain compliance throughout the packaging lifecycle. The task is classified as a subcontract under the NAICS code 385990 and is managed by the Land Supply Chain division of the Department of Defense. Performance is designated for the location in Phoenix, Arizona, with a zip code of 85043. The opportunity was posted on July 26, 2026, and responses are due by August 6, 2026. Although the solicitation number is not provided in the data, the official procurement portal can be accessed via the given link for further details and submission guidance. The contract does not specify a set-aside type, meaning it is open to all eligible subcontractors without preferential classification.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Military Packaging and Preservation ServicesThe contract requires comprehensive packaging and preservation services for military shipments, strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Key tasks include vacuum sealing of items to prevent moisture and contamination, placement of appropriate desiccants to maintain dry internal environments, and accurate barcode labeling to ensure traceability and inventory management across the military supply chain. These procedures must be executed with precision to meet federal defense requirements for long-term storage and operational readiness. This is a subcontract under the Department of Defense’s Land Supply Chain, with a NAICS code of 385990 indicating specialized packaging and preservation services. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026. Performance will occur at an unspecified location managed by the DoD, and all work must align with rigorous military standards to ensure compliance with logistics and distribution protocols. Participation requires demonstrated expertise in military-grade packaging and adherence to standardized labeling and preservation techniques.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the application of preservation packaging and marking services in full compliance with MIL-STD-2073-1E for dry preservation and MIL-STD-129 for marking, including the use of 2D Data Matrix barcodes to ensure complete traceability throughout the supply chain. All work must meet U.S. Defense Logistics Agency acceptance standards, ensuring that items are properly protected, labeled, and documented for storage and distribution. The subcontract is issued under the NAICS code 385990 and is Performance-based, with the place of performance located in Tracy, California, zip code 95304-5000. Responses are due by July 31, 2026, and the contract is managed by the ASC Commodities Division under the Department of Defense.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation services aligned with MIL-STD-2073-1E and DLA RP001 standards, including mandatory cleaning and drying procedures under PRES MTHD:10 to ensure military equipment and components are protected against environmental degradation during storage and transport. All work must strictly adhere to federal specifications governing material handling, corrosion prevention, and long-term preservation protocols to maintain operational readiness. Performance is to be conducted at the specified location in Bremerton, Washington, with a submission deadline of August 3, 2026, and the solicitation is designated as a subcontract under NAICS code 385990. The contracting activity is the Fluid Handling Division within the Department of Defense, and interested parties must respond through the designated DIBBS portal using the referenced solicitation number. Compliance with all technical, procedural, and documentation requirements outlined in the referenced military standards is essential for award consideration.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Compliant Packaging and Kitting ServicesThe contract requires comprehensive packaging, marking, and kitting of electronic components to fully comply with MIL-STD-129 standards for delivery to Defense Logistics Agency depots. All work must meet strict military specifications for labeling, barcoding, physical packaging, and documentation to ensure traceability, durability, and seamless integration into DLA supply chain operations. The performance location is designated as Tracy, California, with a ZIP code of 95304-5000, and the work is categorized under NAICS code 385990 for other electrical equipment and component manufacturing. The contract is structured as a subcontract and is not subject to any specific set-aside requirements. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026. The contracting activity is under the ACTIVE DEVICES DIVISION of the Department of Defense, which oversees technical and logistical requirements for defense electronics. All vendors interested in participating must ensure their processes, facilities, and personnel are certified and capable of consistent adherence to MIL-STD-129 protocols, including proper use of UID labels, moisture barrier packaging where applicable, and accurate shipping documentation. Submissions must be completed through the DIBBS platform using the provided UI link before the deadline to be considered.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Military Packaging and Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for electrical tape in strict compliance with U.S. military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, with mandatory shelf life marking code 33 applied to ensure proper tracking and usage within defined operational timelines. All work must be performed to meet defense-grade specifications for durability, environmental resistance, and traceability, ensuring the product remains viable and identifiable throughout its shelf life and deployment. The solicitation is classified as a subcontract under NAICS code 385990 and is managed by the ASC COMMODITIES DIVISION within the Department of Defense. Performance is required at Tinker Air Force Base, Oklahoma, with a zip code of 73145-9031. Proposals must be submitted by July 31, 2026, and the opportunity was posted on July 23, 2026. Interested parties must review the full requirements via the provided DIBBS portal link to ensure full compliance with technical, documentation, and delivery obligations before the response deadline.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Packaging & Preservation ServicesThe contract requires compliance with MIL-STD-2073-1E standards for the packaging and preservation of defense-related items, encompassing clean and dry processing, heat-sealed barrier bagging, and rigorous application of MIL-STD-129 marking to ensure proper identification and handling. A critical component is the integration of 2D Data Matrix barcodes for full traceability within Department of Defense systems, enabling accurate inventory control and logistics tracking throughout the supply chain. All packaging must meet exacting military specifications to protect components from environmental degradation and ensure operational readiness. This subcontract is issued under NAICS code 385990 by the Fluid Handling Division of the Department of Defense, with performance obligated at the location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. The contract focuses exclusively on packaging and preservation services, requiring vendors to demonstrate proven capability in military-grade handling procedures, with no set-aside designation specified. Participants must be prepared to deliver compliant packaging solutions that fully align with DoD traceability and durability requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Preservation ServicesThe contract requires the provision of military-grade packaging, preservation, and palletization services fully compliant with MIL-STD-2073-1E specifications, including dry preservation and barrier-level conditioning. All materials must be properly sealed, protected against shock and vibration, and enclosed with secondary containment measures to ensure integrity during transportation and storage. Palletization must adhere to DLA RP001 standards, ensuring stability, compatibility, and ease of handling within defense logistics systems. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and must be completed by the response deadline of August 3, 2026. This subcontract falls under NAICS code 385990 and is managed by the Department of Defense through the Maritime Supply Chain organization, targeting vendors capable of supporting critical military logistics operations with durable, regulated packaging solutions.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NRP, CABLE ASSY, AIRC

Solicitation # SPE7L4-26-T-5862

This contract pertains to the procurement of a cable assembly for aircraft, identified by NSN 1680-01-651-2096 and part number 1072389P-1, with a quantity of four units to be delivered within 147 days. The item is designated as a critical application and governed by stringent technical and quality standards incorporated from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. All materials must comply with prohibitions against Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must align with MIL-STD-2073-1E and DLA packaging guidelines, while labeling and marking follow MIL-STD-129 without special codes. The product is to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Sampling and inspection procedures must adhere to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and verification levels are assigned based on attribute criticality. The contractor is required to perform a CMMC Level 2 Self-Assessment to ensure cybersecurity compliance and must use only authorized units of issue as defined by DoD standards. The contract does not permit any variance in quantity—zero percent tolerance on both increase and decrease—and the delivery schedule is fixed with an original required date of January 5, 2028. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20, and the freight destination matches the parcel post address. The solicitation, issued under SPE7L4-26-T-5862, was posted on July 29, 2026, with responses due by August 10, 2026, and is classified under NAICS code 336413. Primary contract oversight is managed by the Department of Defense, Office of Combat Vehicles and Armament, with Anna-Rachelle Betts as the point of contact.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

INSULATION, THERMAL,

Solicitation # SPE7L4-26-T-5861

This contract specifies the procurement of thermal insulation under solicitation SPE7L4-26-T-5861, with a strict prohibition on the use or incorporation of Class I ozone depleting chemicals in any delivered items, overriding all other specification requirements without exempting product performance standards. Any substitute chemicals must be submitted for approval unless explicitly authorized by existing specifications. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item, identified by NSN 2540-01-529-7336 and part number 33M1127-107C, is to be delivered in a quantity of 96 units at a unit price of $96.00, totaling $9,216.00. Delivery is FOB origin with a lead time of 161 days, no quantity variance permitted, and inspection and acceptance to occur at the destination. Packaging must comply with DLA’s RP001, MIL-STD-129 for marking, and either ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified hazardous under FED-STD-313, with DLA requirements taking precedence. All packaging must meet the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. The delivery address is DLA Distribution Red River in Texarkana, Texas, with a required ship date of January 19, 2027, and original delivery date of June 27, 2027. Transportation and shipping instructions are governed by DLAD Proc Notes C19 and C20.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 14 hours ago

DEADLINE

COVER, BOX, ACCESSORIES

Solicitation # SPE7L4-26-T-5863

This contract is for the procurement of a cover, box, and accessories stowage item, sole-sourced to The Boeing Company with CAGE code 81205 and part number 232T1488-22, designated as a critical application item. The delivery is required in 156 days with a firm quantity of 11 units, no variance allowed, and delivery is FOB origin with inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes applied. Palletization must comply with DLA’s packaging rules, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract enforces a complete ban on Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly permitted. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed unless otherwise specified, and attributes are assigned strict verification levels or AQLs. The NSN is 2540017235694, the solicitation number is SPE7L4-26-T-5863, responses were due by August 10, 2026, and the item is classified under NAICS code 336360. All procurement requests must be manually solicited and the unit of issue is each. The contract references mandatory technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 14 hours ago

DEADLINE

HOSE ASSEMBLY, METAL

Solicitation # SPE7L4-26-T-5854

The contract is for a single unit of a metal hose assembly with NSN 4720-01-234-3003 and part number 114B355, supplied by STEWART & STEVENSON POWER PRODUCTS LLC. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is allowed. Inspection and acceptance occur at the origin point, and the item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, containment methods, and marking standards. The product must not contain or come into direct contact with mercury or mercury-containing compounds except for specified functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The delivery destination is the General Depot of Naval Supplies in Kaohsiung, Taiwan, and shipment must follow DLA transportation guidelines, with the freight forwarder and shipping details governed by DLAD PROC NOTES C19 and C20. The contract is issued under solicitation SPE7L4-26-T-5854, with an original required delivery date of July 31, 2026, and the supplier must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

BOOM JIB EXTENSION,

Solicitation # SPE7L4-26-T-5864

The contract pertains to the procurement of five Boom Jib Extensions with NSN 3830-01-572-8815 and part number 13016195, supplied by AMZ Alabama Inc. under solicitation SPE7L4-26-T-5864. Delivery is due in 218 days, with FOB origin and no variance permitted in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. The packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA Packaging Requirements. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise specified, and attributes are classified with strict verification levels. The unit of issue is each, priced at $5.00 per unit, totaling $25.00. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of March 17, 2027. The contract references DLA procedural notes for transportation and requires adherence to federal acquisition guidelines and approved units of issue as defined by DoD standards.

Other Motor Vehicle Parts Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7L4-26-T-5865

The contract specifies the procurement of 2,000 washers, lock, identified by NSN 5310-01-696-5986 and BAE Systems part number 3001076-030HD, under solicitation SPE7L4-26-T-5865. Delivery is required FOB origin within 292 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, packaging materials, and marking per MIL-STD-129 with no special marking code. All items must adhere to strict prohibitions against Class I ozone-depleting chemicals, with any substitutes requiring prior approval unless explicitly authorized by specification. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, and attributes are assigned specific verification levels or AQLs. Transport and shipping instructions reference DLAD procedural notes, and the unit of issue is each (EA). The contract incorporates all technical and quality requirements from the DLA Master List, with revisions controlled based on solicitation or award date depending on acquisition type. The point of contact for inquiries is Anna-Rachelle Betts, with responses due by August 10, 2026, and the estimated delivery date set for May 30, 2027.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

GEAR AND SHAFT SET,

Solicitation # SPE7L4-26-T-5857

This contract is for the procurement of a Gear and Shaft Set for an oil pump used on an air compressor, with the specific part number 1W114884 manufactured by Curtiss-Wright Electro-Mechanical Corp and identified by the NSN 3020-01-004-5128. The requirement is classified as a critical application item and is subject to strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. The item must comply with all applicable packaging standards including MIL-STD-2073-1E and MIL-STD-129 for marking, with packaging materials restricted to specific types and classes per MIL-B-117. No ozone-depleting chemicals are permitted in any component or manufacturing process, and any substitute materials must be pre-approved unless explicitly authorized by the specifications. The item is to be delivered within five days of contract award, FOB origin, with no variance allowed in quantity and must be shipped to the Egyptian Navy Armament Department in Alexandria, Egypt. The sole quantity ordered is one unit, priced at a total of one SE unit, and is to be shipped via the designated freight forwarder at Amentum Warehouse in Fredericksburg, Virginia. The procurement is linked to Contract ID SPE7L4-26-T-5857, with a required delivery date of December 2, 2024, and is governed by DLA packaging and handling requirements, including palletization and intermediate container specifications. Government use codes and project identifiers tie this acquisition to a larger defense program under Track Project TP 1.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7L4-26-U-1031

This contract is for the procurement of a gasket with NSN 5330-01-044-4882, issued under solicitation SPE7L4-26-U-1031 as a total small business set-aside under NAICS code 336411. The item is designated as a critical application component with strict prohibitions against asbestos per FED-STD-313 and must be supplied by approved vendors including Rubbercraft Corporation of California, Parker-Hannifin Corporation, Stillman Seal Corporation, and Hutchinson Seal de Mexico. The quantity is estimated at 167 units, each priced at $167.00, with delivery required within 97 days FOB origin and zero tolerance for quantity variance. Inspection and acceptance occur at origin, and packaging must comply fully with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, opaque bagging to protect against UV deterioration. Packaging and marking adhere to MIL-STD-129 and DLA’s packaging requirements, with no special marking codes applied. The contract governs direct vendor delivery, foreign military sales, and stock shipments, and includes specific handling protocols for hazardous materials under IP025. All technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue date. The point of contact is Heather Kessler, and the solicitation response deadline is August 13, 2026.

Aircraft Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE7L4-26-T-5858

The contract pertains to the procurement of a spur gear designated by part number S6135-20687-1 with NSN 3020-00-012-6029, under solicitation SPE7L4-26-T-5858, with a total quantity of ten units to be delivered within twenty days from the contract date. The delivery is FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the origin. Packaging must conform to MIL-STD-2073-1E with specific methods including dry preservation, zero cushioning material, and packaging level B, while marking adheres to MIL-STD-129 without special codes. The item is classified as a critical application item and must comply with DLA packaging requirements and cybersecurity maturity model certification level 2 self-assessment. The gear is sourced from multiple suppliers including BMT Aerospace USA, Triumph Gear Systems, and Sikorsky Aircraft Corporation. The delivery destination is the Argentine Navy in Buenos Aires, and freight routing follows DLA procedures C19 and C20, with transportation handled by multiple forwarders. The contract is a total small business set-aside under NAICS code 333613, managed by the Department of Defense’s Combat Vehicles and Armament office. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on solicitation or award dates. The point of contact is Anna-Rachelle Betts, and the solicitation was posted on July 29, 2026, with responses due by August 10, 2026. The original required delivery date was April 12, 2021, and the contract includes government-only fields for tracking and distribution.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

PARTS KIT, PINTLE HO

Solicitation # SPE7L4-26-T-5855

The contract is for one unit of a Parts Kit, Pintle HO, identified by NSN 2540-01-699-7580 and vendor part number 8520 from Buyers Products Company DBA 9X737, classified as a Commercial Off the Shelf item. The requirement is set under solicitation SPE7L4-26-T-5855 with a delivery deadline of 20 days from award, FOB origin, and a strict zero variance on quantity. Inspection and acceptance occur at the destination site, with packaging required to comply with MIL-STD-2073-1E Appendix D for kits, and marking must follow MIL-STD-129 with special codes ZZ-ZZ. All packaging and preservation must adhere to DLA’s Packaging Requirements for Procurement, using specified methods, materials, and container codes as outlined in the documentation. The item is to be shipped via vessel using the fastest traceable means, explicitly prohibiting parcel post, with shipment directed to the Virginia Beach freight address under RDD 777. Government shipment instructions reference DLAD PROC NOTES C19 and C20 for transportation logistics. The contract includes technical and quality requirements referenced by R and I numbers from the DLA Master List, controlling based on the solicitation or award date depending on acquisition size. The required delivery date is July 24, 2026, and the point of contact for inquiries is Anna-Rachelle Betts at DLA, with additional administrative details including project code LP5 TP 3, supplier address YDA42, and government-only fields for internal tracking and distribution.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Vehicular Safety Belts with Military ComplianceThe contract involves the supply of three vehicular safety belts identified by NSN 2540-01-707-4012, requiring full compliance with military packaging, marking, and delivery standards. These items must be delivered to a U.S. Naval Station located in Spain, specifically to the FPO address 09645-4000, within 20 days of contract award to ensure timely operational readiness. The solicitation is classified as a subcontract under the NAICS code 336360, indicating involvement with automotive parts manufacturing for defense applications. The Department of Defense, through its LSO COMBAT VEHICLES AND ARMAMENT division, is the contracting organization, with the response deadline set for July 31, 2026, and the solicitation posted on July 28, 2026. All deliverables must meet stringent military specifications to support vehicle safety and mission-critical requirements.

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance & NIST SP 800-171 Assessment SupportThe contract requires support for implementing NIST SP 800-171 cybersecurity controls to ensure compliance with DFARS requirements for handling controlled unclassified information. The work includes conducting a thorough self-assessment of the organization’s cybersecurity posture against the specified controls and accurately submitting the resulting score to the Department of Defense via the Supplier Performance Risk System. This effort is critical for maintaining eligibility to perform on DoD contracts and ensuring the protection of sensitive government data. The task is scoped as a subcontract under NAICS code 541512, with performance location designated as New Cumberland, Pennsylvania, and must be completed by the response deadline of July 31, 2026. The solicitation is issued by the LSO Combat Vehicles and Armament division under the Department of Defense, indicating the high-stakes nature of the compliance effort for defense-related supply chain security.

Computer Systems Design Services

POSTED

DEADLINE