Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Military-Standard Packaging and Marking

Active

Response Deadline12/04/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Military-Standard Packaging and Marking, is issued by the Department of the Navy through the Pa DLA Aviation At Philadelphia. The project requires specialized packaging and marking services for Circuit Card Assemblies intended for prime contractors on NAVSUP projects. All work must be performed in Philadelphia, ensuring that units are packaged according to MIL-STD-2073 and containers are marked per MIL-STD-129. To ensure the survival of components during transit, the contractor must utilize ESDS shielding bags and containers in compliance with ANSI/ESD S20.20-2021. The final deliverable consists of fully packaged and marked shipping containers that are ready for government acceptance. The solicitation was posted on November 4, 2026, with a response deadline of December 4, 2026, falling under NAICS code 561910.

General Info

Agency

Department Of The Navy → Pa DLA Aviation At Philadelphia

NAICS

561910 - Packaging and Labeling Services

Place of Performance

PHILADELPHIA, PA, 19111-5098, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA127QZA54.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CIRCUIT CARD ASSEMB — 5998014322490 — SPRPA127QZA54

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineDec 4

Submission deadline

Response Deadline

12/04/2026, 09:30:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Pa DLA Aviation At Philadelphia

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging and marking for Circuit Card Assemblies for prime contractors on NAVSUP projects. Packages units per MIL-STD-2073 and marks containers per MIL-STD-129. Utilizes ESDS shielding bags and containers in accordance with ANSI/ESD S20.20-2021 to ensure survival during transit. Delivers fully packaged and marked shipping containers ready for government acceptance.

Similar Contracts

Same NAICS industry code

MIL-STD Packaging and MarkingThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support Land Supply Chain. The scope of work requires the application of markings according to MIL-STD-129 and the execution of packaging per MIL-STD-2073-1E, specifically utilizing standardized military marking equipment and WRAP MAT:FA materials. The project entails the processing and delivery of 21 units packaged for shipment to DLA Distribution DDSP New Cumberland. This effort falls under NAICS code 561910 and is managed under the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Preservation for Aerospace ComponentsThis subcontract involves providing specialized military-grade packaging and preservation services for critical aerospace gaskets on behalf of prime contractors for the DLA Weapons Support Fluid Handling Division. The scope of work requires strict adherence to MIL-STD-2073-1E standards, utilizing MIL-DTL-117 medium duty bags that are waterproof, greaseproof, opaque, and UV-protected. Additionally, all packages must be marked according to MIL-STD-129 to ensure they are fully prepared for FOB Origin shipment. The project is categorized under NAICS code 561910 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

MIL-SPEC Preservation and Packaging ServicesThis subcontract for MIL-SPEC Preservation and Packaging Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves providing specialized preservation and packaging for hydraulic components, specifically focusing on actuators. All work must be performed in strict accordance with MIL-H-6083 for preservation and MIL-STD-2073 for packaging, utilizing approved MIL-SPEC materials and coatings. The selected provider is responsible for delivering the preserved and packaged actuators for FOB Destination shipment. This opportunity falls under NAICS code 561910, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

MIL-STD Packaging and Preservation ServicesThis subcontract for MIL-STD Packaging and Preservation Services supports prime contractors on DLA Mechanicsburg supply contracts. The scope of work involves providing military-grade packaging, packing, and marking services for five units, ensuring all items are prepared for domestic and overseas shipment. All work must strictly adhere to MIL-STD-2073-1 standards and utilize MIL-SPEC anti-static and moisture barrier materials to prevent Supply Discrepancy Reports. The project is managed under the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, falling under NAICS code 561910. Deliverables are required to be ready for FOB Origin shipment. The solicitation was posted on November 4, 2026, with a response deadline set for January 4, 2027.

SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

MIL-STD-2073 Compliant PackagingThis subcontract involves providing packaging materials and final packaging services for prime contractors supporting Navsup Weapon Systems Support under the Department of Defense. The primary objective is the secure packaging of sensitive electronic instruments in strict accordance with MIL-STD-2073 standards to ensure assets are protected from damage during transit. The scope of work includes the delivery of properly packed and labeled assets destined for DLA Distribution centers located in New Cumberland, Pennsylvania, and Tracy, California. This opportunity falls under NAICS code 561910, with a response deadline set for December 4, 2026.

Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Marking ServicesThis small business set-aside subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires specialized military packaging and marking services for prime contractors. The scope of work involves the packaging of 96 probe units in strict accordance with ASTM D3951 and RP001 standards, with all marking and labeling performed per MIL-STD-129. The contractor is responsible for the final palletization of these units for delivery to the DLA Distribution DDSP New Cumberland Facility to ensure government acceptance. This procurement falls under NAICS code 561910 and was posted on November 4, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

MIL-STD Packaging and Marking ServicesThis subcontract for MIL-STD Packaging and Marking Services supports prime contractors on Department of the Navy NAVSUP WSS hardware contracts. The selected provider will perform specialized military-grade packaging and marking, ensuring all exterior shipping containers meet MIL-STD-2073-1 standards and all unit, intermediate, and shipping containers are marked according to MIL-STD-129. The scope of work specifically requires the use of Packing Levels A and B containers to ensure all shipments are ready for government acceptance. The project is managed under the Department of the Navy through the PA DLA Aviation At Philadelphia agency, with performance taking place in Philadelphia, Pennsylvania. Interested parties must respond by December 4, 2026. The contract is categorized under NAICS code 561910, focusing on the delivery of properly packaged and marked hardware ready for official military receipt.

Pa DLA Aviation At Philadelphia

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors delivering supply contracts to the Department of Defense, specifically under the DLA Weapons Support Strategic Acquisition Program Directorate. The scope of work involves providing specialized military-grade packaging, marking, and IUID labeling to ensure all shipments are ready for DLA acceptance. The service provider must adhere to strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for shipment marking, and MIL-STD-130 for the application of IUID labels using specialized equipment. This opportunity falls under NAICS code 561910 and requires a response by November 18, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging, marking, and labeling for prime contractors supporting Defense Logistics Agency Troop Support projects. The scope of work requires the processing of 20 units of identification markers destined for the USS Forrest Sherman DDG 98, ensuring all deliverables strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards using compliant materials and equipment. The project is categorized under NAICS code 561910 and is managed by the Department of Defense. Delivery is specified as FOB Destination with the place of performance located at FPO 09569. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

Defense Logistics Agency

POSTED

DEADLINE

MIL-STD-129 Compliant Packaging and Palletization ServicesThis subcontract for MIL-STD-129 Compliant Packaging and Palletization Services involves providing specialized military packaging, marking, and palletization for prime contractors fulfilling DLA supply contracts. The scope of work requires the use of MIL-STD compliant labeling equipment and DLA-approved pallets to ensure all shipments are marked and labeled according to MIL-STD-129 and palletized per RP001 DLA Packaging Requirements for Procurement. The final deliverable is a shipment fully prepared and ready for DLA transport. Managed by the Department of Defense under the Maritime Supply Chain agency, the project falls under NAICS code 561910. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 3, 2026, with a response deadline of November 6, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves performing specialized military packaging and marking of components in accordance with MIL-STD-2073-1E and MIL-STD-129. The provider must utilize MIL-SPEC materials, standardized marking equipment, packaging data QUP:001, and preservation method 42 to ensure shipments are fully prepared for FOB Origin transport. The project is managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, with performance taking place in Waterloo, Iowa. Interested parties must note the response deadline of November 16, 2026. The services fall under NAICS code 561910, focusing on the delivery of fully compliant, ready-to-ship military components.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging and marking of 20 units of pins for delivery to DLA Distribution DDSP New Cumberland. All work must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, utilizing specific technical data including QUP:001, PRES MTHD:31, and CLNG/DRY:1. The project mandates the use of military-grade preservation and wrapping materials to ensure compliance with defense standards. The performance of these services will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this requirement categorized under NAICS code 561910.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of The Navy → Pa DLA Aviation At Philadelphia

Same awarding agency

Military Grade Packaging and Palletization ServicesThis subcontract involves providing specialized military grade packaging, marking, and palletization services for prime contractors supporting DLA Aviation projects through the Department of the Navy. The scope of work requires the preservation and packaging of aviation components, specifically three Radome units, ensuring all processes adhere to MIL-STD-2073-1. Additionally, the contractor must apply UID labeling in accordance with MIL-STD-129 and MIL-STD-130, and perform unit load palletization using MIL-SPEC moisture barriers and cushioning per MIL-STD-147 for FOB Destination delivery. The project is managed by the Pa DLA Aviation office in Philadelphia, with the place of performance located in Philadelphia, Pennsylvania. Interested parties must note the response deadline of November 16, 2026. The services fall under NAICS code 488510, focusing on the rigorous technical standards required for the transport and preservation of critical military aviation hardware.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Manufacturing and Supply of Radome B387 (NSN 5985-01-609-8999)This subcontract involves the manufacture and supply of three Radome B387 units (NSN 5985-01-609-8999) for prime contractors supporting DLA Aviation projects under the Department of the Navy. The scope of work requires the fabrication of radome structures using RF-transparent materials, composite molding, and specialized RF testing equipment. Performance will take place in Philadelphia, Pennsylvania, under NAICS code 336413. The contractor must adhere to strict quality and regulatory standards, including precision cleaning per MIL-STD-1330 and maintenance of ISO 9001 and NCSL Z540.3 or ISO 10012 calibration standards. Additionally, the provider must comply with the Buy American Program. The solicitation was posted on November 4, 2026, with a response deadline of November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Aircraft Control Valve (NSN 1680-01-585-5124)This subcontract involves the supply of one fully configured and tested Aircraft Control Valve, identified by NSN 1680-01-585-5124, for prime contractors supporting Department of the Navy supply contracts via DLA Aviation. The scope of work includes the provision of all integrated hardware, software, and firmware. The selected provider must adhere to strict quality standards, requiring either ISO 9001 or SAE AS9100 certification. Technical requirements mandate that the provider submits Engineering Change Proposals in accordance with DI-SESS-80639E and ensures all items are packaged according to MIL-STD-2073. The performance of this contract is centered in Philadelphia, Pennsylvania, under NAICS code 336413. Interested parties must respond by November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Distributing System (NSN 6150-01-524-0925)This subcontract involves the procurement of three units of the Distributing System, identified by NSN 6150-01-524-0925, to support prime contractors under Department of the Navy NAVSUP WSS supply contracts. The selected provider is responsible for sourcing and manufacturing hardware that adheres to all technical specifications associated with the NSN. Additionally, the contractor must provide Unique Item Identifiers for any units with a cost of 5,000 dollars or more. The agreement requires strict compliance with DFARS 252.225-7000 and 252.225-7036 regarding the certification of domestic content and country of origin. Managed by the Department of the Navy through the DLA Aviation office in Philadelphia, the contract falls under NAICS code 335999. Performance of the contract will take place in Philadelphia, Pennsylvania.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Supply of Fire Extinguisher Containers (NSN 1680-01-317-4532)This subcontract involves the manufacture or procurement of three specialized fire extinguisher containers under NSN 1680-01-317-4532 for prime contractors supporting DLA supply contracts. Managed by the Department of the Navy through the PA DLA Aviation office in Philadelphia, the project requires strict compliance with Critical Safety Item specifications to ensure operational reliability. The contractor is responsible for generating Unique Item Identifiers for each unit and reporting them via WAWF, while ensuring all packaging and marking adhere to MIL-STD-2073 standards. The final deliverable consists of three certified and packaged containers with completed IUID registration, performed at the Philadelphia location.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

Fabrication of Structural Aluminum Panel (NSN 1560-01-735-5849)This subcontract involves the precision fabrication and supply of one structural aluminum panel (NSN 1560-01-735-5849) for prime contractors supporting DLA/NAVSUP WSS aerospace projects. The work must be performed to Critical Safety Item standards, with strict adherence to MIL-STD-129 for container marking and MIL-STD-2073 for packaging. The project is managed under the Department of the Navy via the Pa DLA Aviation office in Philadelphia. Eligible providers must ensure full compliance with DFARS 252.204-7012 cybersecurity requirements and provide Buy American certification. The final deliverable is a single, fully inspected, marked, and packaged aluminum panel. The response deadline for this opportunity is December 4, 2026.

Sheet Metal Work Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Supply of Generator Control U (NSN 1680-01-561-2470)This subcontract involves the procurement of one Generator Control U unit under NSN 1680-01-561-2470 for prime contractors supporting DLA Aviation projects. The selected provider is responsible for the manufacture or procurement of the unit, ensuring that preservative material 19 is applied to all interface metal surfaces. Additionally, the unit must be marked and labeled in accordance with MIL-STD-130 and packaged according to MIL-STD-2073 standards. The contract is managed by the Department of the Navy through the Pa DLA Aviation office in Philadelphia. To be eligible, the contractor must maintain a quality management certification of either ISO 9001 or SAE AS9100. The response deadline for this opportunity is November 20, 2026, with the final deliverable being one fully preserved, marked, and packaged Generator Control U unit.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

Electronic Component Supply for NSN 5998-01-432-2490This subcontract, managed by the Department of the Navy through the Pa DLA Aviation At Philadelphia, involves the supply of high-reliability electronic components for NSN 5998-01-432-2490. The scope of work includes providing military-grade semiconductors, capacitors, and resistors to prime contractors on NAVSUP projects. All deliveries must include full traceability documentation and certificates of conformance for each component, whether provided as individual parts or within component kits. The contract mandates strict adherence to regulatory standards, specifically requiring compliance with the Buy American Act, the Trade Agreements Act, and DFARS 252.225-7036. Performance will take place in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of December 4, 2026, under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Circuit Card Assembly Fabrication and AssemblyThis subcontract with the Department of the Navy, managed by Pa DLA Aviation At Philadelphia, involves the manufacture and assembly of seven Circuit Card Assemblies under NSN 5998-01-432-2490. The scope of work includes the fabrication of printed circuit boards, component sourcing, and professional soldering and assembly services to support prime contractors on NAVSUP projects. Performance will take place in Philadelphia, Pennsylvania. To ensure technical precision and quality, the contractor must utilize ESDS-compliant facilities adhering to ANSI/ESD S20.20-2021 and employ calibration equipment that meets NCSL Z540.3 or ISO 10012 standards. Additionally, the provider is required to maintain ISO 9001 certification and comply with all CAI quality mandates. The response deadline for this opportunity is December 4, 2026.

Bare Printed Circuit Board Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

CONTROL VALVE,AIRCR — 1680015855124 — SPRPA127QUA02

Solicitation # SPRPA127QUA02

Solicitation SPRPA127QUA02, issued on November 4, 2026, by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of one aircraft control valve (NSN 1680-01-585-5124). The requirement is for a fixed-price supply contract with delivery expected within 90 days, FOB Destination. The contractor is responsible for maintaining the total equipment baseline configuration, including hardware, software, and firmware, and must submit any Engineering Change Proposals in accordance with DI-SESS-80639E. Inspection and acceptance will occur at the origin, performed by the Contract Administration Office or the consignee at destination. Award evaluation will prioritize past performance over price, with the government assessing supplier, item, and price risks via SPRS. The solicitation is not a small business set-aside, though it requires standard representations regarding business size and veteran-owned status. Compliance with the Buy American Act and DFARS trade agreements is mandatory, and the contractor must adhere to ISO 9001 quality standards and specific calibration requirements such as NCSL Z540.3 or ISO 10012. Packaging must follow MIL-STD-2073 and MIL-STD-129, with specific requirements for OCONUS shipments and electrostatic discharge sensitive items. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

DISTRIBUTING SYSTEM — 6150015240925 — SPRPA127QVA14

Solicitation # SPRPA127QVA14

Solicitation SPRPA127QVA14, issued on November 4, 2026, by DLA Aviation at Philadelphia for the Department of the Navy, seeks the procurement of three units of a distributing system under NSN 6150-01-524-0925. The government intends to make a single award based on the most advantageous offer, prioritizing past performance as evaluated through the DoD Supplier Performance Risk System (SPRS) over price. Inspection and acceptance are both conducted at the origin, and the contractor must adhere to high-level quality management standards such as ISO 9001 or SAE AS9100. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073 and MIL-STD-129, with specific requirements for Depot Level Repairable labels and ISPM 15 compliance for wood packaging. Electronic invoicing must be processed via the Wide Area WorkFlow (WAWF) system. Key regulatory requirements include DFARS 252.204-7012 for safeguarding covered defense information, NIST SP 800-171 cybersecurity standards, and the Buy American and Balance of Payments Program. Offerors must maintain active registration in the System for Award Management (SAM) and provide detailed pricing and certifications as part of their submission.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS