MISCELLANEOUS
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract pertains to the procurement of a Tail Piece, Sil-Brazed Socket, identified by part number A316271-3 and NSN 0001S00000046, with a requirement for 84 units to be delivered within 375 days after delivery order. This is a Critical Application Item under Aircraft Launch and Recovery Equipment (ALRE) and is subject to stringent traceability and serialization mandates, requiring each unit to be uniquely marked with serial and lot numbers, contractor and manufacturer CAGE codes, part number, and contract number, in accordance with MIL-STD-129 and NAVAIR ALRE-specific technical drawings. Any deviation from these marking requirements must be resolved by prioritizing the associated drawing specifications, and re-branding that obscures original OEM markings is strictly prohibited. All parts, including scrap material, must be fully accounted for throughout manufacturing, and serialization impracticality due to size, material properties, or cost must be formally notified to the DLA contracting officer prior to submitting a quote. The item is restricted to approved sources only, requiring offerors to be either directly approved by the Naval Air Warfare Center Aircraft Division at Lakehurst or supply from an approved source, as defined by the NAVICP Philadelphia Source Approval Brochure and associated procedures. Source approval may necessitate a pre-award survey involving NAWC Lakehurst and submission of official documentation such as a Source Approval Letter from NAVICP’s Engineering and Product Support Directorate. The product is subject to multiple governing technical and quality requirements referenced from the DLA Master List and prohibits contamination with ozone-depleting chemicals and intentional use of mercury or mercury-containing compounds except in narrowly defined, authorized applications. Technical data associated with this item is controlled under ITAR or EAR regulations, restricting access and export to entities with approved U.S./Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. All documentation, packaging, and delivery must comply with DLA packaging, inspection, and configuration management standards, and no surplus material is acceptable for this procurement.
General Info
Agency
NAICS
Place of Performance
3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USSet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Response Deadline
Organization & Contact Information
Full Description
A316271-3
ALRE CAI
Serialization is required for this ALRE CAI Part as well as the packaging traceability. Contractor technical documentation shall reflect the appropriate marking scheme. All serialized and lot numbered CAI parts shall be accounted for; to include material scrapped during manufacturing. Re-branding by suppliers which obscures the original marking (part number, serial number, Cage) of the OEM of ALRE CAI parts is prohibited. Please notify DLA contracting officer at time of quote is serialization is not practical due to size, material property, unreasonable or excessive cost.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
The Government Procuring Activity has determined that Surplus is not Acceptable for this NSN. (End of TQ Requirement) MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) CRITICAL APPLICATION ITEM
SOURCE APPROVAL TO BE ELIGIBLE FOR AWARD UNDER THIS SOLICITATION, AN OFFEROR MUST BE AN APPROVED SOURCE OR PROVIDE THE PRODUCT OF AN APPROVED SOURCE AS DETERMINED BY THE ENGINEERING SUPPORT ACTIVITY, NAVAL AIR WARFARE CENTER (NAWC) AIRCRAFT DIVISION LAKEHURST. THE CRITERIA AND
SPE7M1-26-Q-1310
SECTION B
SUPPLY/SERVICE: 1720-00-602-1000 CONT'D
PROCEDURES FOR SOURCE APPROVAL ARE CONTAINED IN PART I OF THE NAVAL
INVENTORY CONTROL POINT (NAVICP) PHILADELPHIA BROCHURE ENTITLED "SOURCE
APPROVAL INFORMATION BROCHURE FOR SPARES". THE LATEST VERSION OF THIS
BROCHURE MAY BE OBTAINED BY ACCESSING NAVICP'S WEBSITE:
HTTPS://WWW.NAVSUP.NAVY.MIL, OUR TEAM, NAVICP, BUSINESS OPPORTUNITIES,
COMMODITIES, SOURCE APPROVAL REQUEST (SAR) BROCHURE SPARES
TO ASSIST IN THE DETERMINATION OF SOURCE APPROVAL, THE OFFEROR MAY BE
REQUIRED TO SUBMIT TO A SURVEY PRIOR TO AWARD IN WHICH NAWC LAKEHURST
MAY PARTICIPATE.
IN ADDITION, THE OFFEROR MUST PROVIDE THE FOLLOWING INFORMATION, WHICH
MAY BE CONSIDERED IN DETERMINING WHETHER THE OFFEROR IS AN APPROVED
SOURCE:
(1) A SOURCE APPROVAL LETTER FROM NAVICP'S ENGINEERING AND PRODUCT
SUPPORT DIRECTORATE; OR;
(2) OTHER EVIDENCE INDICATING THAT THE OFFEROR MEETS THE SOURCE APPROVAL
CRITERIA.
ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR
MINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND
APPROVAL.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH
UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER.
(February 2016)
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH & RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
RD002, COVERED DEFENSE INFORMATION APPLIES
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND REQUIRES ENGINEERING SOURCE APPROVAL BY THE GOVERNMENT DESIGN CONTROL ACTIVITY.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 0001S00000046 Quantity: 84 EA Purchase Request: 7017385229QTY - See Solicitation Delivery: 375 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN
Same awarding agency