Missile Storage Stand

Combined Synopsis/Solicitation - F1S0AF1014B002 This is a combined synopsis/solicitation for commercial items prepared IAW the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotes are being requested and an additional written solicitation will not be issued. This is a Request for Quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Regulation (FAR) and Supplements, Federal Acquisition Circular (FAC) 2005-49 and DFARs Change Notice (DPN) 201110214. NAICS is 336419 with a small business size standard of 500 employees. This acquisition is a 100% small business set-aside. The Air Force Flight Test Center (AFFTC), at Edwards AFB, CA is seeking potential sources capable of providing a Missile Storage Stand, which includes the following Specifications: REQUIREMENTS: QUANTITY ONE (1) EACH SPECIFICATIONS FOR MISILE STORAGE STAND ATTACHED WITH PRINT SPECIFICATIONS ARE AS FOLLOWS: (COLOR: ORANGE) 1. DRAWING X20065024 2. DRAWING X20065025 3. DRAWING X20065026 4. DRAWING X20065027 Minimum salient characteristics: QTY - 1 each - It should be able to hold up to 4 AIM-120 Missile POD - All sealed tube assemblies shall have a .25 diameter weep/drain hole to permit condensation drainage. - All dimensions apply before application of coating. - The cleaning method and agents used shall not be injurious to any part or to the environment, nor shall any part be contaminated by the cleaning agent. - Shall be IAW with specified drawings to be provided upon request. - X20065024-10_O.dft - 1 OF 2 - AIR FORCE RELEASE D - ENGINEERING DRAWING LAYOUT D - NEXT ASSEMBLY USED ON - 1655 FEB 74 - AF FORM - CODE IDENT NO. - CURRENT - AIR FORCE AUTHENTICATION AIR FORCE CODE IDENT NO. DRAWING NO. - ENG - CHK - DR - .XXX - .XX - - FRACTIONS DECIMALS ANGLES - DIMENSIONS ARE IN INCHES-TOLERANCES ON: - THIRD ANGLE PROJECTION - TITLE - SIZE - SCALE: SHEET - CONTRACT NUMBER: - FA9200-07-C-0006 - GENERATED USING SOLID EDGE FILENAME: - REV - UNLESS OTHERWISE SPECIFIED - QUANITY REQUIRED PER DASH NO. - SIGNATURES ARE ON FILE ON - AF FORM 2602 IN MMHE, EGLIN AFB - APPV - MISSILE STORAGE STAND - .03 - CAD MAINTAINED. CHANGES SHALL ONLY BE - INCORPORATED AT THE DIRECTION OF THE DESIGN - ACTIVITY USING A COMPATIBLE CAD SYSTEM. - REVISIONS - LTR DESCRIPTION DATE APPROVED - DISTRIBUTION STATEMENT C DISTRIBUTION AUTHORIZED TO U.S. GOVERNMENT AGENCIES AND THEIR - CONTRACTORS. REASON: ADMINISTRATIVE OR OPERATIONAL USE. DATE: 15 SEPTEMBER 1988. OTHER REQUESTS - FOR THIS DOCUMENT SHALL BE REFERRED TO MMHE FOCAL POINT, EGLIN AFB, FL 32542-5000. - WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT - CONTROL ACT (TITLE 22, U.S.C., SEC. 2751, ET SEQ.). VIOLATIONS OF THESE EXPORT CONTROL LAWS ARE SUBJECT - TO SEVERE CRIMINAL PENALTIES. - DESTRUCTION NOTICE - FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT - DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT. - NOTES: - 1. INTERPRET DRAWING IAW ASME Y14.100 AND ASME Y14.5M-1994. - 2. REMOVE ALL BURRS AND SHARP EDGES .06 MAX - 3. SCREW THREADS SHALL CONFORM TO FED-STD-H28/2, AND BE INSPECTED IAW - ANSI/ASME B1.3M, SYSTEM 21. - 4. WORKMANSHIP: - ALL PARTS SHALL BE IN THE CONDITION SPECIFIED BY THE DRAWINGS AND SHALL BE - FREE FROM DEFECTS SUCH AS, BUT NOT LIMITED TO, BLEMISHES, BURRS, CAVITIES, - PITS, VOIDS, CORROSION, CRACKS, DENTS, DISTORTION, WARPAGE, GOUGES, SCORES, - NICKS, INCLUSIONS, LAPS, POROSITY, SLIVERS, AND OTHER FOREIGN MATTER. EXCEPT - AS PROVIDED ON THE DRAWING, CLEANING SHALL BE THOROUGH TO REMOVE ALL DIRT, - CHIPS, GREASE, OIL, FLUX CHEMICAL DEPOSITS, RESIDUES, AND OTHER FOREIGN MATTER. - THE CLEANING METHOD AND AGENTS USED SHALL NOT BE INJURIOUS TO ANY PART OR - TO THE ENVIRONMENT, NOR SHALL ANY PART BE CONTAMINATED BY THE CLEANING - AGENT. - 5. PERMANENTLY MARK 18894ASSYXP20065024-10 IN APPROX AREA SHOWN, IN .25 HIGH - CHARACTERS, IAW MIL-STD-130. - 6. STENCIL AS NOTED IN APPROXIMATE AREA SHOWN, IN 1.00 HIGH GOTHIC CHARACTERS - USING PAINT IAW MIL-PRF-85285, TYPE II REQUIREMENTS, COLOR NO. 37038 (BLACK), - IAW FED-STD-595. - 7. EQUIVALENT, INTERCHANGEABLE COMMERCIAL HARDWARE ACCEPTABLE. - 8. KNOWN SUPPLIER - McMASTER-CARR SUPPLY COMPANY - PO BOX 740100 - ATLANTA, GA 30374-0100 - PHONE: (404)346-7000 - FAX: (404)349-9091 - 1 - 2 2X - 2X 6 - ALL SHEETS ARE - SAME REVISION - 3 4X - -10 ASSEMBLY - 6 2X - EACH FOUR-AUR MISSILE STORAGE STAND SHALL BE SUBJECTED TO A - PROOF LOAD TEST PRIOR TO INITIAL ACCEPTANCE OR AFTER ANY - STRUCTURAL REPAIRS HAVE BEEN PERFORMED. - A PROOF LOAD OF 5000 LBS SHALL BE EVENLY DISTRIBUTED UPON THE - TWO NEST BLOCKS FOR 5 MINUTES MINIMUM. - ANY EVIDENCE OF PERMANENT DEFORMATION OR BREAKAGE OF ANY - COMPONENTS DURING OR AFTER THE APPLICATION OF THE PROOF LOAD - SHALL BE CAUSE FOR REJECTION OF THE FOUR-AUR MISSILE STORAGE - STAND. A REJECTED FOUR-AUR MISSILE STORAGE STAND SHALL NOT BE - USED FOR ANY PURPOSE UNTIL THE DISCREPANCIES ARE CORRECTED - AND THE PROOF LOAD TEST HAS BEEN SUCCESSFULLY COMPLETED. - 4X 4 - 4X 5 - 10 SCREW, CAP, HEX OKVE6 91247A553 .250-20 UNC-2B X 2.75 LG STL, ZINC PLT 2D4 17 - 4 HOOK, BOLT PLATE OKVE6 3648T41 2A4 16 - 2 NUT, SELF-LOCKING, HEXAGON OKVE6 90636A060 .500-13UNC-2B, STL, ZINC PLT, .44 HT 2A4 15 - 16 NUT,SELF-LOCKING, HEXAGON OKVE6 90636A049 .375-16UNC-2B STEEL, ZINC PL, GD 8, .33 HT 2A4 14 - 10 NUT, SELF-LOCKING, ACORN OKVE6 90507A230 .250-20UNC-2B, CRES, .25 THD DEPTH 2D4 13 - 24 WASHER, FLAT OKVE6 98026A029 .31 NOM ID X .75 OD X .072 THK, STL, ZINC PLT 2D4 12 - 4 WASHER, FLAT OKVE6 98026A033 .56 NOM ID X 1.38 OD X .12 THK, STL, ZINC PLT 2A3 11 - 32 WASHER, FLAT OKVE6 98026A031 .44 ID X 1.00 OD X .08 THK, STL, ZINC PLT 2A4 10 - 8 SPACER, STRAP BUCKLE OKVE6 94639A141 .50 OD X .250 NOM ID X .375 LG NYLON 2D6 9 - 2 SCREW, CAP, HEX HD OKVE6 91247A724 .500-13UNC-2B X 3.00 LG, STL, ZINC PLT 2A3 8 - 16 SCREW, CAP, HEX HD OKVE6 92865A626 .375-16UNC-2A X 1.25 LG STL, ZINC PLT 2A4 7 - 4 SCREW, CAP, HEX HD OKVE6 91247A554 .250-20UNC-2A X 3.00 LG, STL, ZINC PLT 2D6 6 - 4 BRAKE, SIDE- CAM OKVE6 2531T888 FOR 6-INCH SWIVEL CASTER 2B2 5 - 4 CASTER, SWIVEL OKVE6 2531T27 6.00 DIA, 2.00 WIDE, 7.50 HT, 900 LB CAP, POLYURETHANE 1B5 4 - 4 STRAP ASSEMBLY 20065027-10 1D4 3 - 2 NEST BLOCK 20065026-01 1C3 2 - 1 BASE WELDMENT 20065025-10 1B6 1 - -10 NOMENCLATURE CAGE IDENTIFYING NO. MATERIAL/SPECIFICATION ZN FN - N. WIGGINS 20070905 - E. ZAMORSKI 20070905 - B. CHAMBLISS 20070906 - BRYAN T. PRICE 20070910 Delivery: 4 WARO or Less Place of delivery, performance, and acceptance is FOB Destination, Edwards AFB, CA 93524. Interested parties who believe they can meet all the requirements for the items described in this synopsis are invited to submit in writing a complete quote including delivery FOB destination Edwards AFB, CA 93524. Offerors are required to submit with their quote enough information for the Government to evaluate the minimum requirements detailed in this synopsis. CONTRACTORS MUST COMPLY WITH FAR 52.204-7 CENTRAL CONTRACTOR REGISTRATION AND DFARS 252.204-7004, ALTERNATE A. INTERESTED CONTRACTORS CAN ACCESS THE CLAUSES BY INTERNET URL: http://farsite.hill.af.mil. TO REGISTER WITH THE CCR, GO TO URL: http://www.ccr.gov/ . ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) MUST BE COMPLETED. USE OF ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) BECAME MANDATORY 1 JANUARY 2005. CONTRACTORS CAN ACCESS ORCA THROUGH CCR BY INTERNET URL: http://www.ccr.gov/ . The following provisions and clauses apply: Provision 52.212-1, Instructions to Offerors--Commercial; Clause 52.212-2 Evaluation-Commercial Items, the following factor shall be used to evaluate offers: Lowest price technically acceptable offer, Technically acceptable is meeting all minimum salient characteristics; clause 52.212-4, Contract Terms and Conditions--Commercial Items; clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders--Commercial Items (to include: 52.222-26, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era); Clause 52.232-33 Mandatory information for electronic funds transfer payment. The following DFARs clauses apply to this acquisition: Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items; 252.225-7001 Buy American Act and Balance of Payment Program: The following AFFARS clauses apply to this acquisition: Clause 5352.223-9000, Elimination of Use of Class I Ozone Depleting Materials, 252.211-7003, Item Identification and valuation; 252.232-7010. Levies on Contract Payments; 5352.201-910, Ombudsman; 5352.242-9000, Contractor Access to Air Force Installations. Offers are due at the Air Force Flight Test Center, Directorate of Contracting, 5 South Wolfe Avenue, Building 2800, Edwards AFB, CA, 93524, not later than February 22, 2011 at 7:00am PST. Faxed Transmission is acceptable, but Email Transmission is preferred. E-mail address: steven.winner@edwards.af.mil. Phone: 661-277-5686, Fax: 661-277-0470.