Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Mixed Manifold Diagnostic Equipment AC System

Active
N6833526Q1180 Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Naval Air Systems Command at Joint Base MDL, New Jersey, plans to award a limited competition contract to The Boeing Company and its authorized distributors for five units of the Mixed Manifold Diagnostic Equipment AC System, part number C21007-74, used to assess pressure, temperature, and humidity levels in the main distribution manifold. Boeing, as the Original Equipment Manufacturer, holds exclusive proprietary rights to the design and technical data, and no alternative suppliers have been identified with the necessary expertise to meet the Government’s requirements. The Government does not possess the drawings or technical documentation needed to support a fully open competition, justifying the limited sourcing approach. This notice serves as a presolicitation and is not a request for proposals; however, all responsible sources may submit capability statements, proposals, or quotations by August 21, 2026, to be considered for potential future competition. Responses will be evaluated solely to determine whether the requirement can be opened to full and open competition, with no contract being awarded based on submissions received in response to this notice. The decision not to compete the requirement remains solely at the Government’s discretion, and any submitted information must demonstrate clear advantage to the Government in a potential future procurement. Inquiries must be directed to Contract Specialist Alexis Kelly at alexis.r.kelly.civ@us.navy.mil.

General Info

Boeing to supply five diagnostic units exclusively due to proprietary tech and no viable alternatives.

Agency

Department Of Defense → Navair Warfare Ctr Aircraft DivisionView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

NJ, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navair Warfare Ctr Aircraft Division
Contacts1 person available
OfficeJOINT BASE MDL, NJ, 08733, USA
Organization / Agency
Department Of Defense → Navair Warfare Ctr Aircraft Division
View Agency Profile
Office AddressJOINT BASE MDL, NJ, 08733, USA
Contacts

Full Description

Show more

The Naval Air Systems Command, Lakehurst, NJ intends to issue a contract on a limited competition basis between The Boeing Company and their authorized distributors for the acquisition of five (5) PN: C21007-74, Nomenclature: Mixed Manifold Diagnostic Equipment AC System. The intended use is to check the health of the main distribution manifold for system pressure, temperature, and humidity.


The Boeing Company owns the proprietary rights to the drawing and design of this equipment. As the Original Equipment Manufacturer (OEM), Boeing is the only source with the requisite knowledge, experience, technical expertise and technical data to provide the required PSE. The Government does not own rights to the drawings and technical data package necessary to support a competitive acquisition. There are no other manufacturers identified that were able to meet the Government's requirements. 


This notice of intent is not a request for competitive proposal; however, the Government will consider all responses received within 15 days after the date of publication of this synopsis. Information received as a result of this notice of intent will normally be considered solely for the purpose of determining whether to conduct a full and open competitive requirement. A determination by the Government not to open the requirement to full and open competition based upon responses to this notice in solely within the discretion of the Government. THIS IS NOT A REQUEST FOR PROPOSAL. All responsible sources may submit a capability statement, proposal or quotation, which shall be considered by the agency. No contract will be awarded on the basis of offers received in response to this notice. All inquiries and concerns must be addressed to the Contract Specialist, Ms. Alexis Kelly at alexis.r.kelly.civ@us.navy.mil. Responses to this notice must be submitted by 21 August 2026. A determination not to compete this requirement is within the discretion of the Government. Any response to this notice must be advantageous to the Government in a future competition.

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
Supply of Welding Electrodes (E70S6H2POP)The contract calls for the procurement and delivery of 57 units of E70S6H2POP welding electrodes, manufactured to meet military specifications and Defense Logistics Agency standards. These electrodes are intended for use in defense-related applications and must conform to strict performance and quality requirements to ensure operational reliability in critical environments. The solicitation is categorized as a subcontract under NAICS code 335999, indicating it falls within other miscellaneous electrical equipment and component manufacturing. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the goods are expected to be delivered or utilized. The contract was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the DDSP New Cumberland Facility under the Department of Defense. The procurement is part of a broader effort to maintain supply chain readiness for defense manufacturing and repair operations, ensuring that welding materials used in military infrastructure and equipment meet rigorous military-grade criteria. While no set-aside designation or specific contracting officer details are provided, the involvement of the Defense Logistics Agency underscores the importance of adherence to standardized specifications and documented compliance. Interested suppliers must submit responses through the official DIBBS platform before the deadline to be considered for award, and failure to meet the technical or administrative requirements may result in disqualification. The contract reflects the Department of Defense’s ongoing commitment to sourcing high-quality, specification-compliant materials from qualified vendors to support national defense readiness.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
Technical Manufacturing of Sound Controlling Battery UnitsThe contract requires the manufacture of five units of SOUND CONTROLLING BATT, a specialized military-grade acoustic dampening device integrated with battery functionality, identified by NSN 5640-01-273-7362. Production must strictly adhere to defined technical performance and material specifications to ensure operational reliability and compliance with defense standards. The work is classified as a subcontract under NAICS code 335999, with performance obligated at the New Cumberland facility, ZIP 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. All deliverables must meet the rigorous quality and functionality benchmarks expected for military applications. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions specified. While no point of contact is listed, interested parties can access additional details through the official DIBBS portal using the provided link. The contract does not include details on pricing, payment terms, or delivery schedules beyond the requirement for five fully functional units, implying that such specifications are expected to be detailed within technical documentation referenced by qualified bidders. Compliance with all applicable defense regulations and certification requirements is assumed as a condition of award.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → Navair Warfare Ctr Aircraft Division

Same awarding agency

NAICS: 334513
New
Federal
High and Low Temperature Calibrators
Solicitation # N68335-26-R-1102
The Naval Air Warfare Center, Aircraft Division in Lakehurst, NJ is seeking information from potential vendors regarding the availability of two specific calibration devices: P/N 3604A-1-101 High Temperature Calibrator and P/N 3605A-1-101 Low Temperature Calibrator. This request is a market research tool to identify capable suppliers to replace outdated or non-functional calibration standards currently in use, with no intention to award a contract based on this response. Businesses interested in participating must provide their company name, CAGE Code, address, point of contact details, and company size, along with any information on existing products or capabilities that meet the Navy’s requirements, including rough order of magnitude pricing. All responses must be submitted by July 28, 2026, at 4:00pm EST to Justin Panecki at justin.p.panecki2.civ@us.navy.mil and must reference RFI number N68335-26-R-1102 on the subject line and all documents. Responses may include proprietary information, but it is the respondent’s responsibility to clearly mark such data; the Government will protect all designated proprietary information and will not pay for submissions. This RFI does not constitute a solicitation, offer, or binding obligation, and failure to respond does not disqualify future participation. Any subsequent formal solicitation will be posted on SAM.gov.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 238160
New
Federal
Building 99 Roof Repair and Replace
Solicitation # N6833526Q1188
The Naval Air Warfare Center – Aircraft Division at Lakehurst is soliciting a firm-fixed-price contract to repair and replace the roof on Building 99, a project in support of the Prototype Manufacturing and Test Department. This procurement is a total small business set-aside under NAICS code 238160, restricting eligibility to small businesses as defined by the SBA’s $16.5 million average annual receipts size standard. All interested parties must attend a mandatory site visit on July 27, 2026, with security access coordinated through Mark Harrup and Sean Catney; failure to attend results in automatic disqualification. The solicitation, issued as a Request for Quotation under FAR Part 13 with solicitation number N6833526Q1188, requires proposals to conform fully to the scope of work detailed in Attachment 001, which includes complete removal of the existing failed membrane roof, inspection and repair of the wood sub-structure, installation of Polyiso insulation and a mandatory ½-inch cementitious roof board, and application of a multi-ply Modified Bitumen membrane system across the approximately 2,290 square foot, two-level roof. Offers will be evaluated on a strictly pass/fail basis for technical eligibility, with award going to the lowest-priced responsible offeror who meets all requirements. Proposals must be submitted electronically via email to Eric Daly no later than 5:00 PM on August 3, 2026, using Excel-compatible files with active formulas and links. Shipping must be FOB destination CONUS, with all shipping costs included in the unit price, and the quoted price must remain valid until August 30, 2026. Offerors must maintain an active SAM.gov registration through award and comply with all applicable FAR and DFARS clauses, including limitations on subcontracting, cybersecurity requirements under NIST SP 800-171 and CMMC, prohibitions on telecommunications equipment from designated foreign entities, and mandatory Unique Item Identification (UID) marking per MIL-STD-130. Additionally, contractors must demonstrate adequate resources, experience, facilities, and technical controls per FAR 9.104-3(a), and all work must adhere to UFC 3-110-03 and EM 385-1-1 standards. The contract includes clauses mandating whistleblower rights, pollution prevention, Buy American compliance, prohibition of hexavalent chromium, and
Roofing Contractors

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
Federal
H53K HMH462/Japan/Option Snap On Tooling
Solicitation # N6833526RFI0526
This request for information is issued by the Naval Air Warfare Center Aircraft Division under solicitation number N6833526RFI0526 to gather market insights for a potential future procurement of standardized maintenance tool kits. The requirement involves 26 distinct tool groupings, including pliers, wrenches, sockets, hammers, and screwdrivers, all configured into kits based on IDSC Holdings LLC/Snap-on industrial products. A base requirement calls for 206 kits to be delivered across two operational sites, with an optional add-on of 103 additional kits for a potential third site. The NAICS code for this effort is 332216, with a small business size standard of 750 employees, and respondents are asked to disclose their small business status and whether they qualify under categories such as 8(a), SDB, HUBZone, or veteran-owned. Respondents must indicate the percentage of work they would perform in-house and demonstrate compliance with the 50 percent performance requirement under the Defense Authorization Act of 2013, along with confirmation of adequate financial and operational capacity to fulfill the requirement. Responses must be submitted in writing within five days of the RFI release, limited to ten pages, and sent via email to the designated point of contact. All submissions are voluntary and at the respondent’s expense; the government will not reimburse any costs or compensate for time or resources invested. While no contract or purchase obligation is implied, respondents may include price data in a separately labeled document marked PRICE DATA, although this does not constitute an offer. Proprietary information must be clearly identified to receive safeguarding under federal regulations, though the government assumes no liability for unmarked sensitive data. Product specifications, distributor details, and certification proofs may be included without counting toward the page limit. The RFI explicitly states that failure to respond does not bar future participation, and any eventual solicitation will be posted on beta.SAM.gov, making it the respondent’s responsibility to monitor for follow-on opportunities. All information will be handled according to FAR 15.207 and is not binding on the government in any way.
Saw Blade and Handtool Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
Federal
F/A-18 Load Test Adapters for Blocks I, II & III Slings
Solicitation # N6833526Q0430
The Naval Air Warfare Center Aircraft Division is soliciting Firm Fixed Price proposals for the procurement of Load Test Adapters for Blocks I, II, and III Slings in support of the F/A-18 E/F program under solicitation N68335-26-Q-0430. This is a 100% Small Business Set-Aside under NAICS code 332510, requiring all offerors to self-certify as small businesses in SAM.gov and maintain an active Unique Entity ID. Access to the controlled technical data package, which includes export-restricted drawings governed by the U.S. Munitions List, is contingent upon submission of a currently certified DD Form 2345 and proof of CMMC Level 2 certification, either through self-assessment or formal validation. Offerors must also demonstrate compliance with NIST SP 800-171 cybersecurity requirements, with assessment results registered in the Supplier Performance Risk System. Proposals must be submitted electronically by 16:00 EST on July 8, 2026, to the designated point of contact, and all deliverables must be manufactured at the contractor’s facility and delivered within 120 days of contract award to the NAVAIR Lakehurst SE Staging Facility in New Jersey. Inspection and acceptance will occur at the contractor’s location by a Defense Contract Management Agency representative, with no subsequent acceptance at destination. Packaging must adhere strictly to ASTM D3951-18 and MIL-STD-129R standards, including ISPM 15-compliant wood materials, prohibited use of loose fill or shredded paper, and proper MILSTRIP labeling with 2D barcodes. Only new equipment under manufacturer warranty is acceptable, and all submissions must be accompanied by full compliance with federal regulations including FAR 52.204-24 related to telecommunications and video surveillance equipment restrictions. Award will be made on a Lowest Price Technically Acceptable basis, with non-compliance on any mandatory requirement resulting in automatic disqualification. The Government assumes no obligation until a contract is formally awarded.
Hardware Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332216
New
Federal
Socket Wrench Crowfoot, Gimbal Bearing Compressor Sets Solicitation
Solicitation # N6833526Q1164
The Naval Air Warfare Center Aircraft Division at Joint Base MDL, New Jersey, is preparing to competitively procure thirty Socket Wrench Crowfoot Attachments and two Gimbal Bearing Compressor Sets under solicitation number N68335-26-Q-1164. This requirement is set aside entirely for small businesses and will be awarded on a Firm-Fixed-Price basis using the Lowest Price Technically Acceptable evaluation method. All proposals must be submitted in response to the official solicitation, which will be released exclusively on SAM.gov, and no requests for the solicitation will be accepted via telephone or written correspondence. Offerors must monitor SAM.gov regularly after the release date to ensure receipt of any amendments. A current CMMC Level 2 (Self) certification or higher is mandatory for any contractor information system that will handle Federal contract information or controlled unclassified information during performance of the contract, and this status must be maintained throughout the contract period. Additionally, all offerors must possess an active DD Form 2345 to access technical drawings and must be currently registered in the System for Award Management to be eligible for award. The solicitation response deadline is July 8, 2026, and the point of contact for inquiries is Suresh Jafar at suresh.jafar.civ@us.navy.mil. This pre-solicitation notice is for informational purposes only and does not obligate the government to award a contract or compensate any party for information provided in response to it.
Saw Blade and Handtool Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333514
New
Federal
The Drive Plate Bushing Gage - H-1 United States Marine Corps (USMC) Helicopter Program
Solicitation # N68335-26-Q-1139
The U.S. Navy’s Naval Air Warfare Center, Aircraft Division, based at Joint Base MDL in New Jersey, is preparing to issue a Firm Fixed Price contract for the Drive Plate Bushing Gage, Part Number 18D13071-1, to support the United States Marine Corps’ Domestic H-1 Helicopter Program. This procurement will be conducted as a Total Small Business Set-Aside under the SBA and NAICS code 333514, ensuring eligibility is restricted to small businesses as defined by the Small Business Administration. The solicitation number is N68335-26-Q-1139, with documents available exclusively through the SAM.gov website; no requests via phone or mail will be honored. The presolicitation was posted on June 10, 2026, and responses must be submitted by June 25, 2026, at 5:00 PM Eastern Time. Vendors are required to monitor the SAM website periodically for any amendments to the solicitation, as updates will only be posted there. The government has explicitly stated this document is not a request for proposal and does not obligate it to pay for any information received from potential vendors. It serves solely as an administrative notice to indicate possible future procurement activity and should not be interpreted as a commitment to award a contract. The contract, if awarded, will be performed at Lakehurst, New Jersey, and inquiries should be directed to Chris Brake at christopher.d.brake5.civ@us.navy.mil. All participation is voluntary, and the Government reserves the right to modify, delay, or cancel the procurement at any time without liability or obligation.
Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

6 days ago

DEADLINE

in 25 days
View Details
NAICS: 333914
Federal
MQ-4C Nitrogen Servicing Units
Solicitation # N6833526Q1160
The U.S. Navy’s Naval Air Warfare Center Aircraft Division is soliciting competitive bids for Nitrogen Servicing Units, part number 1317AS100-2 and NSN 3655-01-517-9308, to support the MQ-4C Triton Unmanned Air Systems and the Royal Australian Air Force. The procurement is structured as a four-year Fixed-Price Indefinite Delivery/Indefinite Quantity contract, with all proposals due by August 17, 2026. This opportunity is designated as a Small Business Set Aside under NAICS code 333914, meaning only small businesses are eligible to compete. The solicitation has been amended to include mandatory federal clauses related to small business subcontracting and foreign acquisition restrictions, along with a requirement for vendors to hold a Cybersecurity Maturity Model Certification at an specified level to ensure compliance with defense cybersecurity standards. Proposals must be submitted through the SAM.gov portal, with the primary point of contact being Mairen Flanagan of the Department of Defense, reachable via email or phone. The contract will be awarded to a vendor capable of delivering the specified units to support UAS operations, with performance expected to align with U.S. military requirements and international partnership obligations. The solicitation was posted on July 29, 2026, and all responses must be received by 8:00 PM Eastern Time on the deadline. Interested parties are urged to review all amendments and attachments to ensure full compliance with technical, certification, and regulatory conditions.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

8 days ago

DEADLINE

in 11 days
View Details