Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Mixed Petroleum Liquid Waste Disposal

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the management and disposal of 2,750 kilograms of mixed petroleum-based liquid waste, which necessitates either physical separation or fuel blending to meet regulatory and environmental standards. This work is classified under NAICS code 562910, indicating it falls within the hazardous waste treatment and disposal sector. The solicitation is issued as a subcontract under the Department of Defense, specifically through the Defense Logistics Agency, and is not subject to any formal set-aside requirements. The work is expected to be performed in an unspecified location, with no details provided regarding the place of performance or point of contact. The contract was posted on July 17, 2026, and is accessible via a DIBBS portal link, which serves as the official record for award and performance tracking.

General Info

2,750 kg petroleum waste managed via separation or blending under DoD subcontract, NAICS 562910, no set-aside, perform unspecified location.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Management and disposal of 2,750 kg of mixed petroleum-based liquid waste requiring separation or fuel blending.

Similar Contracts

Same NAICS industry code

Civida - Request for Quotes - Biohazard Cleaning Services

Solicitation # AB-2026-05424

Civida is soliciting qualified contractors to provide biohazard clean-up services on an as-needed basis across properties in Edmonton and its surrounding areas. The request, identified by solicitation number AB-2026-05424, was posted on July 30, 2026, with responses due by September 3, 2026. Contractors must be equipped to handle a range of biohazard scenarios including bloodborne pathogens, chemical spill cleanup, trauma scenes, and other hazardous material removal in compliance with all applicable safety and regulatory standards. Services are expected to be delivered promptly and professionally, with contractors required to maintain appropriate certifications, insurance coverage, and trained personnel capable of responding to emergency situations at any time. The contract does not specify a fixed term or volume of work, meaning services will be engaged based on actual client needs as they arise. All work must be performed within the designated geographic area, primarily focused on the City of Edmonton in Alberta. Interested parties should direct inquiries to Karndeep Pannu, Procurement Specialist, via phone or email provided in the solicitation. Full details and submission guidelines are available through the official Alberta Purchasing portal link, and all proposals must be submitted by the stated deadline to be considered.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

COC-RWR-FY27-31100: Sink Undercoating Abatement

Solicitation # BD-26-1144-CAMBR-CAMBR-131923

The City of Cambridge is soliciting bids for Sink Undercoating Abatement under solicitation number BD-26-1144-CAMBR-CAMBR-131923, with the bid available for viewing and download via the City’s eProcurement Portal. The proposal submission deadline is August 13, 2026, at 7:00 PM, and the solicitation was posted on July 30, 2026. The work is to be performed within Cambridge, Massachusetts, specifically at locations where sink undercoating removal and abatement are required, and the project falls under the jurisdiction of the City of Cambridge as a state and local government entity. Shuo Wang is designated as the primary point of contact, serving in the role of Purchaser for the procurement. There is no set-aside classification specified, and the NAICS code is not provided, but the contract is open to qualified vendors meeting the technical and regulatory requirements for hazardous material abatement work. Bidders are expected to follow all applicable safety, environmental, and labor standards associated with the removal of sink undercoating materials.

CAMBR - City of Cambridge

POSTED

about 23 hours ago

DEADLINE

MP Fuel Storage and Overflow Tank Cleaning and InspectionThe contract involves the cleaning and inspection of main propulsion fuel storage and overflow tanks to assess contamination, corrosion, and structural integrity, ensuring operational safety and compliance with maritime standards. This work is critical for maintaining the readiness and longevity of propulsion systems and requires specialized expertise in tank remediation and non-destructive evaluation methods. The effort must be performed in Alameda, with all activities adhering to strict environmental and safety protocols. This is a Small Business Set Aside contract under NAICS code 562910, reserved exclusively for small businesses, and is issued by the Department of Homeland Security’s Sflc Procurement Branch 2. The opportunity was posted on July 30, 2026, with a firm response deadline of August 24, 2026, at 4:00 PM. Subcontractors must be prepared to meet rigorous technical and regulatory requirements, and all work must be executed in accordance with federal guidelines governing hazardous material handling and vessel maintenance.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Asbestos Abatement – Non-Friable Floor Tile and Mastic RemovalThe contract involves the safe removal of asbestos-containing floor tiles and mastic at the Durham VA Medical Center using non-friable abatement techniques that comply with all applicable federal, state, and local regulations. The work is designated as a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, ensuring preference for businesses owned and controlled by veterans with service-connected disabilities. The project is scoped specifically to handle non-friable materials, which requires specialized procedures to prevent the release of asbestos fibers during removal, encapsulation, and disposal. Performance of the work is required at the Durham location with a ZIP code of 27705, under the oversight of the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6. The NAICS code 562910 indicates this is a hazardous waste removal and treatment service, underscoring the environmental and safety standards that must be strictly followed. The solicitation was posted on July 30, 2026, with proposals due by August 5, 2026.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Hazardous Waste Disposal Services (Off-Site)This contract pertains to the off-site disposal of hazardous chemicals and waste produced during the cleaning and maintenance of Self-Contained Breathing Apparatus (SCBA) equipment, requiring complete adherence to all applicable environmental and safety regulations. The contractor is obligated to manage the entire disposal process with rigorous documentation, including a maintained chain-of-custody record and official disposal receipts, all of which must be furnished to the Contracting Officer’s Representative to ensure full compliance and traceability. The work is classified under NAICS code 562910, indicating specialized waste management services, and is structured as a subcontract under the Department of Defense, specifically directed by the Commanding General. All disposal activities must occur off-installation, ensuring that hazardous materials are handled, transported, and disposed of at licensed and approved facilities. The opportunity was posted on July 30, 2026, with responses due by August 10, 2026, and performance is expected to meet stringent federal standards for hazardous waste handling without site-specific location details provided.

Commanding General

POSTED

DEADLINE

Diesel Fuel Tank Cleaning ServicesThe contract requires complete cleaning of diesel fuel storage tanks to ensure operational readiness, encompassing sludge removal, high-pressure water jetting, vacuuming, and proper disposal of all residues. The work must be performed at a facility in Fresno, California, with a zip code of 93727, and is designated as a subcontract under the SBA Certified Women-Owned Small Business Program Set-Aside, meaning only businesses certified as women-owned small businesses are eligible to respond. The North American Industry Classification System code is 562910, indicating it falls under Other Remediation Services. The solicitation was posted on July 30, 2026, with a firm response deadline of August 11, 2026, at 10:00 p.m. The contracting activity is under the Department of Defense, specifically W7MX Uspfo Activity Caang 144, and the work is intended to maintain critical fuel storage infrastructure in a clean, safe, and functional condition.

W7MX Uspfo Activity Caang 144

POSTED

DEADLINE

Recover UAS debris from land and shallow water (Palau)

Solicitation # W91QVP26Q2603

The U.S. Army’s 921st Contracting Battalion is conducting market research to identify local businesses in Palau capable of supporting Tenacious Archer 2026 by recovering debris from unmanned aerial systems after live-fire exercises. The effort focuses on collecting and properly disposing of materials such as lithium batteries, fuel residues, electronic components, and UAS parts like carbon fiber spars, aluminum motor mounts, ABS plastics, and plywood fuselage sections generated during the exercise window of August 1 to August 2, 2026. This is not a solicitation or a request for proposals—no contracts will be awarded from this notice, and submissions will be used solely for planning purposes without compensation for responders. The required work involves using boats for shallow water recovery and manual labor on beaches to ensure all exercise-related debris is removed within 24 hours after the final live-fire event concludes. The performance area includes specific locations near 53 N MJ 53915 12490 and other sites yet to be detailed, with disposal duties falling entirely on the contractor. Government support is not provided, and all submitted information is strictly for market research to determine feasibility and local capacity. Responses must be submitted by August 1, 2026, and inquiries should be directed to the points of contact listed under the Department of Defense office based in Fort Shafter, Hawaii.

0413 Aq Hq Contract Augmented

POSTED

DEADLINE

in about 6 hours

Z1AA--Asbestos-Containing Floor Tile and Mastic Removal Durham VAMC

Solicitation # 36C24626Q0500_0002

The contract pertains to the removal of asbestos-containing floor tile and mastic at the Durham Veterans Affairs Medical Center in North Carolina, under Solicitation Number 36C24626Q0500_0002, with a response deadline of August 5, 2026. This amendment is a service-disabled veteran-owned small business set-aside, designated under FAR 19.14, and is classified under NAICS code 562910 for waste management and remediation services. The contracting office is the 246-NETWORK Contracting Office 6 located in Hampton, Virginia, and all work is to be performed at the Durham facility with a zip code of 27705. The primary point of contact is Contracting Officer Cleveland Wynne, reachable via email and phone for inquiries related to the solicitation. All bids must be submitted before the stated deadline to be considered for award under this set-aside program designed to support service-disabled veteran-owned small businesses.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

SB ERS MATOC, USACE Northwestern Division and EPA Region 2

Solicitation # W912DQ26RA109

The U.S. Army Corps of Engineers, Kansas City District is seeking to establish a Multiple Award Task Order Contract for Environmental Remediation Services as a total small business set-aside under NAICS code 562910 to support the Northwestern Division and EPA Region 2. This contract will enable the government to procure a wide range of environmental remediation and site management services, including in-situ thermal and chemical remediation, groundwater and soil treatment system operations and maintenance, site investigations, risk assessments, remedial design, and long-term response actions. Contractors will also be expected to provide technical support such as hydrological and geophysical studies, data management, modeling, permitting, public engagement, and preparation of reports and decision documents for contaminated sites, including hazardous, toxic, and radioactive waste facilities and abandoned mines. All qualifying small businesses may respond to the upcoming solicitation, which will be released no earlier than 15 days after this presolicitation notice. The contract will be competed competitively to ensure multiple awardees are selected to fulfill task orders across a broad geographic area without specified performance locations. The primary point of contact for inquiries is Michael Dolly, with Christopher Lewis as the secondary contact, both reachable through the Kansas City District office. This notice serves only as an announcement of intent and does not obligate the government to award a contract or reimburse any costs associated with proposal preparation. The solicitation number is W912DQ26RA109, and the posting date is July 30, 2026.

W071 Endist Kansas City

POSTED

DEADLINE

Hazardous Material Abatement (Asbestos Handling)The contract pertains to the identification, containment, removal, and disposal of asbestos-containing materials that may be encountered during excavation or demolition activities in Los Angeles, California, specifically within the 90012 zip code area. It is designated as a subcontract under NAICS code 562910, which classifies it under hazardous waste collection and treatment services, and is managed by The Metropolitan Water District of Southern California. The work requires strict adherence to environmental and occupational safety standards to ensure the safe handling of asbestos, including proper sealing, transport, and disposal at approved facilities to prevent exposure and contamination. All activities must be conducted by qualified personnel with appropriate certifications and protective measures in place. The solicitation was posted on July 29, 2026, with a response deadline of August 25, 2026, at 9:00 PM Pacific Time. While no set-aside provisions or agency-specific details are outlined, the performance location is clearly specified as Los Angeles, and interested parties must submit their proposals through the provided online portal by the stated deadline. The nature of the work demands specialized expertise in hazardous material abatement, and contractors are expected to comply fully with federal, state, and local regulations governing asbestos remediation. No point of contact information is provided, suggesting that all inquiries must be directed through the official bidding platform linked in the notice.

The Metropolitan Water District of Southern California

POSTED

DEADLINE

Hazardous Materials Packaging and Compliance ServicesThe contract requires the provision of packaging, labeling, and documentation services for hazardous materials shipments, ensuring full compliance with OSHA, MIL-STD-129, and DLA preservation standards. All work must be executed to meet stringent federal regulations governing the safe handling, identification, and recordkeeping of hazardous substances, with a focus on military logistics and supply chain integrity. The services are intended to support Department of Defense operations and must align with established preservation protocols to maintain material readiness and safety during transit and storage. This is a subcontract solicitation under NAICS code 562910, posted on July 29, 2026, with a response deadline of August 10, 2026. The place of performance is designated as FPO 09566, indicating operations will primarily support overseas or mobile military units. The contracting activity falls under the Land Supply Chain organization within the Department of Defense, underscoring the critical nature of these services in sustaining mission-critical logistics. Potential bidders must demonstrate proven expertise in hazardous material handling and adherence to federal compliance frameworks to qualify.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires the labeling and packaging of hazardous material shipments in strict compliance with OSHA’s Hazard Communication Standard and MIL-STD-129 for proper shipment marking. This includes the preparation and submission of Safety Data Sheets and hazard warning labels to ensure all regulatory requirements for handling, transporting, and identifying dangerous goods are fully met. The work must be performed to support military logistics operations and align with federal defense standards for hazardous material management. The contract is listed as a subcontract under NAICS code 562910, with a response deadline of August 10, 2026, and was posted on July 29, 2026. The place of performance is specifically designated as New Cumberland, Pennsylvania, 17070-5002, and the contracting activity falls under the Department of Defense’s Active Devices Division. All work must be completed in accordance with the specified standards to ensure regulatory compliance and mission readiness.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Compliant Packaging and Kitting ServicesThe contract requires the packaging and preservation of valve disks in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring they are properly containerized, marked, and prepared for extended storage and reliable shipment. All work must adhere to military-grade protocols for environmental protection, labeling, and handling to maintain readiness and integrity over time. This includes precise documentation and procedures for sealing, desiccants, corrosion inhibitors, and protective materials tailored to the valve disks’ specifications and operational environment. The service is classified as a subcontract under NAICS code 493190 and is issued by the Defense Logistics Agency under the Department of Defense. Although specific location details and point of contact information are not provided, the performance location and administrative oversight remain within the DLA’s supply chain framework. The solicitation was posted in July 2026 and is accessible through the DIBBS system, indicating it is part of an active defense logistics initiative focused on long-term inventory management and readiness support.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract entails providing hazard communication compliance services specifically for valve disks that involve hazardous materials, ensuring adherence to OSHA regulations through the proper labeling of containers and the delivery of accurate Material Safety Data Sheets. This work is critical for safeguarding personnel and maintaining regulatory compliance in environments where hazardous substances are handled or stored. The scope is focused on the accurate identification, documentation, and communication of chemical hazards associated with these components across the supply chain. The contract is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 541690 for other scientific and technical consulting services. It was posted on July 30, 2026, and performance will be carried out in support of federal defense operations, though specific performance location details are not provided. The services must align fully with federal safety mandates to mitigate risks and ensure consistent, legally compliant hazard communication practices for all applicable valve disk components.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Manufacturing of Valve Disks (NSN 4820011267403)The contract mandates the precision manufacture and delivery of 11 valve disk units identified by NSN 4820011267403 to the Defense Logistics Agency at New Cumberland, ensuring full compliance with military specifications governing material composition, dimensional tolerances, and operational performance. The equipment must meet rigorous defense standards to guarantee reliability and interoperability within military systems, with no tolerance for deviation in quality or function. This is a subcontract under the NAICS code 332911, classified as a precision manufacturing activity, and was posted on July 30, 2026, indicating a future delivery timeline. The contract is managed by the Department of Defense through the Defense Logistics Agency, with performance obligations tied directly to the agency’s logistical network. While no specific point of contact or place of performance address is provided, the delivery destination and regulatory framework are clearly defined, emphasizing adherence to federal procurement protocols and quality assurance requirements.

Industrial Valve Manufacturing

POSTED

DEADLINE

LAMP, INCANDESCENT

Solicitation # SPE8E7-26-T-3444

The contract is for a single incandescent lamp with part number Q1000T3/CL/240V and NSN 6240-00-885-6755, procured under solicitation SPE8E7-26-T-3444 by the Defense Logistics Agency on behalf of the Department of Defense. The item is being acquired through a fully competitive process in accordance with military and federal specifications, and compliance with DLA packaging and technical quality requirements is mandatory, with all referenced standards drawn from the DLA Master List of Technical and Quality Requirements. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and the delivery must be completed within 20 days after order placement at the specified performance location in Jackson, Mississippi, ZIP 39232-8881. The procurement is classified under NAICS code 335139 and is being handled as a federal acquisition with no set-aside designation. The point of contact for the contract is Kelly Mitchell, reachable via email and phone provided, and all official documentation and updates are accessible through the DIBBS portal. Any non-accepted supplies must have government identification removed prior to return, and the applicable revisions of technical and quality requirements are determined by the solicitation issue date since this is a simplified acquisition. The supplier must adhere strictly to all referenced DLA requirements, and failure to comply with specifications or delivery timelines may result in rejection of the supply.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E4-26-Q-0338

This contract specifies the procurement of cold-drawn/rolled steel bars made from SAE AMS-S-7720B, composition 302, with a diameter of 0.875 inches and lengths between 8 and 16 feet, delivered in full-foot increments only. Each foot of material weighs approximately 2.044 pounds, and the product must comply with strict dimensional and quality standards outlined in referenced technical documents. A Certificate of Quality Compliance, or mill-material certification, is mandatory for every shipment and must accompany each delivery to the customer or DLA depot, with a copy sent directly to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer information including heat and lot number, and exact dimensions using approved methods such as stenciling or stamping, excluding die stamping. The markings must be legible, waterproof, stable under normal handling, and free of contaminants. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared. Products not sourced from approved QSLD distributors are considered unauthorized substitutions and may result in criminal penalties. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined by ASTM A700, and adhesive labels required for bars under 0.250 inches in nominal diameter. Palletization, preservation, and shipping follow DLA-specific packaging guidelines, and shipments must be sent via traceable freight methods—parcel post is prohibited. The delivery point is Nellis Air Force Base, with a 30-day acceptance delivery order window, firm fixed pricing, and zero variance allowed on quantity. Inspection and acceptance occur at destination, and all technical and quality data, including CDRL-METALSCERT, are governed by the DLA Master List of Technical and Quality Requirements, accessible through official DLA portals.

Rolled Steel Shape Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L7-26-T-4504

The contract specifies the procurement of two power supply units under solicitation SPE7L7-26-T-4504, with a delivery deadline of 20 days from award and delivery terms set at FOB destination. The item, identified by NSN 6130016214007 and part number G1W-3760V from JAF INTERNATIONAL, INC., is subject to strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and labeling performed as directed. Sampling inspections follow MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The supply must be free of intentional mercury or mercury-containing compounds, except for exempted uses such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, with portable devices containing mercury requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Delivery is directed to FPO AP 96692 aboard USS JACKSON LCS 6, with shipment required via the fastest traceable means excluding parcel post. The contract prohibits quantity variance and mandates inspection and acceptance at the destination. The unit of issue is each (EA), with no pricing details listed, and the contract is under federal agency oversight by the Defense Logistics Agency.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-159T

The contract specifies the procurement of one DISK, VALVE with NSN 4820-01-477-0616 and part number V3C10421-01 from VACCO INDUSTRIES, under solicitation SPE7MC-26-T-159T, with a required delivery within 20 days of award. The item must be delivered FOB origin, inspected and accepted at the destination, with no quantity variance allowed. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, materials, and unit container codes, with marking adhering to MIL-STD-129 and no special marking required. The product is destined for USS HYMAN G RICKOVER (SSN 795) in Groton, CT, and must be shipped via fastest traceable means, explicitly prohibiting parcel post. Strict environmental compliance is enforced: mercury or mercury-containing compounds are prohibited except for specified functional applications under NAVSEA 5100-003D, requiring shock-proof design and secondary containment for portable devices; class I ozone-depleting chemicals are entirely banned, with any substitutes needing prior approval. Delivery must meet the original required date of July 23, 2026, and the contract incorporates all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The point of contact is Paula Mcclary, reachable via email and phone provided, and the solicitation is managed by the Defense Logistics Agency under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

DEADLINE

DESICCANT CONTAINER, DE

Solicitation # SPE8E8-26-T-4929

The contract calls for the delivery of five desiccant containers for dehumidifiers under solicitation SPE8E8-26-T-4929, with a unit price of $5.000 and a total contract value of $25.000. Delivery is required FOB Origin within five days of order receipt, with the destination being ASRC Federal Facilities Logistics at 6801 Roosevelt Blvd., Building 110/Door 16, Jacksonville, FL 32212. Inspection and acceptance are to occur at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E, using Packaging Code U, Preservation Method 10 (Clean and Dry), and Unit Container D3, with palletization governed by DLA’s RP001 requirements. Marking and labeling must conform to MIL-STD-129, with no special marking required. The item is designated as a critical application and is identified by NSN 4440-01-116-9581 and part number TA495-5. Inspection and quality assurance are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample unless otherwise specified; MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not acceptance criteria. Critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, corresponding to AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. The contractor must comply with the DLA Master List of Technical and Quality Requirements referenced by RA001 and RC001. Additional clauses mandate compliance with safeguarding requirements for covered defense information, prohibitions on trafficking in persons, employment eligibility verification, sustainable products, and hazardous material identification. The contract includes FAR and DFARS clauses covering equal opportunity, accelerated small business payments, changes, subcontracting, and contract type. Invoicing must be submitted through WAWF, and the contractor is required to provide a Unique Entity Identifier and CAGE code if applicable. The contract is subject to DFARS 252.204-7012 cybersecurity requirements, DFARS 252.240-7997 NIST

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

TAPE, REFLECTIVE

Solicitation # SPE8E5-26-T-2025

The contract pertains to the procurement of 3 picture glasses (PG) of reflective tape, with each PG equivalent to 10 units, totaling 30 units, under NSN 9390001224967 and part number 4SE00573-5. The item is to be delivered FOB origin within five days of order receipt, with delivery directed to the Royal Jordanian Air Force Headquarters in Amman, Jordan. Packaging must comply strictly with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including specific preservation methods as defined by QUP:001, which mandates Clng/Dry:1 preservation with unspecified materials for wrapping, cushioning, and dunnage; plastic use is discouraged unless contractually required. Marking must adhere to MIL-STD-129 with no special marking codes applied, and barcoding is required for logistics tracking. The contract incorporates all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and addresses covered defense information under RD003. Inspection and acceptance occur at origin, and invoicing must be processed through Wide Area WorkFlow (WAWF). The contract value is fixed at $3.00 for the entire quantity, classified as a simplified acquisition under FAR 52.213-4 with applicable deviations. The contract includes a full suite of cybersecurity and compliance clauses, including safeguarding covered defense information under 252.204-7012, NIST SP 800-171 assessment requirements, and prohibitions on covered telecommunications equipment. Hazard communication requirements are governed by DFARS 252.223-7001 and OSHA standards, and the contractor must comply with representations regarding entity identification, socioeconomic status, and whistleblower rights. The contract was issued by the Defense Logistics Agency on July 30, 2026, with a response deadline of August 4, 2026, and requires all submissions through the DLA Internet Bid Board System.

All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

DEADLINE

FLUSHING UNIT, TOILE

Solicitation # SPE8E8-26-T-4925

The contract pertains to the procurement of two flushing units for toilets, identified by NSN 4510-00-464-3184, with a required delivery within 20 days of award. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is managed through solicitation number SPE8E8-26-T-4925 and was posted on July 30, 2026, with responses due by August 10, 2026. The acquisition falls under NAICS code 421720 and is designated as a federal procurement with no specific set aside. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirement. The contractor must comply with DLA packaging standards and remove all government identification from rejected supplies. The supplier, MAG Aerospace Industries Inc DBA Monogram Systems based in Carson, California, is expected to meet all performance and delivery obligations. Primary point of contact for inquiries is Alexis Selby, reachable via email and phone provided in the contract data.

POSTED

DEADLINE

GAGE, DEPTH, RULE

Solicitation # SPE8E5-26-T-3742

This contract pertains to the procurement of a single unit of a depth gage ruler with NSN 5210-01-602-6297 under solicitation SPE8E5-26-T-3742 issued by the Defense Logistics Agency on behalf of the Department of Defense. The item has no shelf life requirement and is subject to strict export controls under ITAR or EAR regulations, meaning any technical data associated with it cannot be shared or exported without prior authorization from the Department of State or Department of Commerce, including disclosures to foreign nationals within the United States. To access this controlled technical data, contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD training on export-controlled data handling, and pass the DLA Export-Controlled Technical Data Questionnaire, with approval granted by the DLA controlling authority. The solicitation incorporates technical and quality requirements from the DLA Master List referenced online, with revisions controlled based on acquisition type and amendment dates. Cybersecurity requirements mandate that any third-party assessment organization involved must be CMMC Level 2 certified. The place of performance is designated as Jacksonville with a delivery requirement of five days after delivery order award. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is governed under NAICS code 333515. All inquiries should be directed to Khue Nguyen at the provided contact details.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

PARTS KIT, AIR CONDITIO

Solicitation # SPE8E8-26-T-4927

This contract specifies the procurement of a single parts kit for an air conditioning system, identified by NSN 4130-01-541-9069, with a quantity of one unit to be delivered within 20 days to the USS Tripoli LHA 7 at FPO AP 96694-2900. The kit must be packaged and marked in strict compliance with MIL-STD-129 and MIL-STD-2073-1E, ensuring all components are securely contained within a single box unless multiple boxes are necessary, in which case each must be clearly labeled as part of a set. Contents must be cushioned to prevent movement or damage, and an itemized list must accompany each boxed kit. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must include a secondary containment and be shockproof per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling compliance. The deliverable is subject to inspection and acceptance at the destination, with no tolerance for quantity variance, and the vendor must adhere to DLA packaging and labeling protocols, including the use of specific procurement codes and transportation procedures outlined in DLAD notices C19 and C20. The solicitation was issued under contract SPE8E8-26-T-4927 with a response deadline of August 10, 2026, and the original required delivery date is July 9, 2026.

Nonferrous Forging

POSTED

DEADLINE