Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Mobile VHF Radio Component Supply

Active

Federal

Response Deadline11/09/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Mobile VHF Radio Component Supply supports prime contractors on Army Contracting Command-Aberdeen Proving Ground projects under the Department of Defense. The scope of work involves the manufacture and delivery of high-power VHF amplifiers, vehicle-grade chassis, power cables, and mounting brackets. All products, including heat sinks and heavy-duty wiring harnesses, must be produced in accordance with Motorola OEM and FAR 12.102 standards. The contract falls under NAICS code 334220 and requires the delivery of finished electronic components and vehicle-mounting hardware to designated manufacturing facilities. Performance will take place at Aberdeen Proving Ground. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

General Info

Subcontract for manufacturing and delivering VHF radio components for Army Contracting Command projects.

Agency

Department Of Defense → W6QK Acc-Apg

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

Aberdeen Proving Ground, MD, 21005, USA

Set-Aside

NONE

Documents

This scope was carved out of PRESOLICITATIONMOTOROLA.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Pre-Solicitation Motorola

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 27

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 08:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Apg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc-Apg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electronic components, housings, or vehicle-mounting hardware for prime contractors on Army Contracting Command-Aberdeen Proving Ground (ACC-APG) projects. Manufactures high-power VHF amplifiers, vehicle-grade chassis, power cables, and mounting brackets using heat sinks and heavy-duty wiring harnesses per Motorola OEM and FAR 12.102 standards. Delivers finished components to manufacturing facilities.

Similar Contracts

Same NAICS industry code

Supply of Waveguide Adapters (NSN 5985-01-304-0254)This subcontract involves the manufacture or sourcing of specialized waveguide adapters, specifically part NSN 5985-01-304-0254, for prime contractors delivering to the DLA Weapons Support Active Devices Division. The work requires the use of precision RF fabrication equipment and strict adherence to marking and labeling standards per MIL-STD-129. Packaging must comply with ASTM D3951 or specific TQ requirements IP025 and RP001 for palletization. The contract mandates CMMC Level 2 compliance and adherence to the Buy American Act. Interested parties must respond by November 12, 2026, for this requirement categorized under NAICS code 334220. The final deliverable is the fully packaged waveguide adapter meeting all specified technical and regulatory standards.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Antenna Hardware Supplier (NSN 5985-01-705-6845)This subcontract through the Department of Defense Active Devices Division involves the procurement and delivery of 10 antenna units, part number 12237-2740-01, manufactured by L3Harris Global Communications, Inc. The supplier is responsible for ensuring all hardware meets strict military standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per RP001. The contract requires full compliance with the Buy American Act and the Berry Amendment. All accepted units must be delivered FOB Origin to Fort Carson, Colorado. This effort falls under NAICS code 334220 and supports prime contractors on DLA Land projects.

ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Manufacturing of MAST (NSN 5985008562606)

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Attenuator Assembly (NSN 014676847)This subcontract involves the manufacture or procurement of one Attenuator Assembly, identified by NSN 014676847, to support prime contractors for the DLA Weapons Support Active Devices Division. The assembly must be produced using materials compliant with FSC 5985 and delivered through the DLA distribution system. Performance for this contract is centered in Virginia Beach. Strict production guidelines prohibit the use of additive manufacturing processes. Additionally, the contractor is required to ensure the domestic origin of materials or provide full disclosure for any non-domestic components used. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Radome Manufacturing (NSN 5985-01-306-0418)This subcontract involves the manufacture of eight certified Radome units, which serve as protective enclosures for radar antennas under NSN 5985-01-306-0418. The project is managed by the Department of Defense through the DLA Weapons Support Active Devices Division and will be performed in San Diego. Fabrication must adhere to strict quality control standards, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, the contractor must maintain CMMC Level 2 certification to ensure the secure handling of Covered Defense Information and must comply with the Buy American Act. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 334220 for the production of specialized radio frequency devices.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

GAGE ROD, LIQUID LEVEL

Solicitation # SPE4A5-27-T-1397

Solicitation SPE4A5-27-T-1397, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for the procurement of liquid level gage rods, identified by NSN 6680014692244 and Metrex Valve Corp part number 50M-335. The requirement consists of three separate line items, each for a quantity of one unit. Delivery is required within 20 days after order, with an original required delivery date of October 9, 2026. The items are to be delivered FOB Destination to the USS Cleveland (LCS 31) via the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to technical and quality requirements, including sampling methods per MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional addition of mercury. Packaging must comply with ASTM D3951 and RP001, with marking and labeling following MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Additionally, the contractor must utilize the Wide Area WorkFlow system for invoicing and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1684

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M5-27-T-0944

Solicitation SPE7M5-27-T-0944 is a request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 79 antennas, specifically Persistent Systems LLC part number ANT-2040 (NSN 5985-99-993-2180). This procurement is designated as a HUBZone Small Business set-aside cascade and may be eligible for automated award. The required delivery date is February 23, 2027, with a delivery lead time of 119 days after order. Shipping is established as FOB Origin, with the final destination for both inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict packaging and marking standards, utilizing MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be commercially packaged per ASTM D3951, while hazardous materials require packaging according to TQ requirement IP025 and the submission of Safety Data Sheets prior to award. Payment will be processed electronically through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding telecommunications equipment, cybersecurity safeguarding, and the prohibition of hexavalent chromium.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M0-27-T-0753

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

ADAPTER, MICROPHONE

Solicitation # SPE7M5-27-T-0957

Solicitation SPE7M5-27-T-0957 is a total small business set-aside issued by the DLA Weapons Support Active Devices Division for the procurement of 1,956 microphone adapters, identified by NSN 5965-01-528-9290. The requirement is issued under the First Destination Transportation program with delivery terms set as FOB Origin. The delivery schedule specifies a period of 228 days, with a need ship date of June 12, 2027, and a final required delivery date of July 4, 2027, to the DLA Distribution New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. This procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed technical data training. Technical data is governed by DFARS 252.225-7048. Additionally, the contract prohibits the use of additive manufacturing processes unless specifically approved. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with a specific prohibition on mercury or mercury compounds. All quotes must be submitted via the DIBBS system by October 26, 2026, and payment will be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE7M0-27-T-0785

Solicitation SPE7M0-27-T-0785 is a small business set-aside issued by the DLA Weapons Support Maritime Supply Chain ESOC Buys for the procurement of 10 commercial off the shelf antennas. The required items are identified by NSN 5985017253812 and Ericsson Enterprise Wireless Solutions part number 170801-000. Delivery is required within five days of award, with an original required delivery date of October 27, 2026. The items are to be shipped FOB Origin to the South Carolina Army National Guard in Eastover, South Carolina, using the fastest traceable means. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. Compliance with the Buy American Act, Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions is required. Award evaluation may include the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

AMPLIFIER SUBASSEMBLY

Solicitation # SPE7M5-27-T-0943

Solicitation SPE7M5-27-T-0943 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 10 amplifier subassemblies. The required items are identified by NSN 5996001266139 and associated part numbers 109152-3 from Symetrics Industries, LLC or A228200 from Ateez Corp. This is designated as a critical application item with a need ship date of April 3, 2027, and an original required delivery date of August 11, 2027. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to technical and quality standards, including CMMC Level 2 Self-Assessment and the safeguarding of covered defense information. Because the amplifier subassembly is classified as an electrostatic and electromagnetic sensitive device, the contractor must implement rigorous precautionary packaging and handling procedures in accordance with MIL-PRF-81705 and MIL-STD-129, utilizing approved ESD workstations and specific barrier materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, compliance with the Buy American Act, and adherence to NAICS code 334220.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Apg

Same awarding agency

Radio Accessory ManufacturingThis subcontract for Radio Accessory Manufacturing supports prime contractors on Army Contracting Command-Aberdeen Proving Ground projects under the Department of Defense. The scope of work involves the manufacture of high-capacity batteries, charging cradles, and frequency-specific antennas for VHF/UHF bands. Production must utilize lithium-ion cells, RF-shielding materials, and conductive polymers while adhering strictly to Motorola OEM and FAR 12.102 standards. The contract falls under NAICS code 334220 and requires the delivery of finished peripheral accessories to the prime contractor. Performance will take place at Aberdeen Proving Ground, zip code 21005. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

UHF Portable Radio Component SupplyThe UHF Portable Radio Component Supply subcontract involves the provision of electronic components, housings, and sub-assemblies for prime contractors supporting Army Contracting Command-Aberdeen Proving Ground projects. The scope of work includes the manufacture of radio chassis, circuit boards, antennas, and specialized UHF frequency components. All deliverables must utilize UHF-band compatible electronics and ruggedized materials in strict accordance with Motorola OEM and FAR 12.102 standards, with finished products delivered directly to designated manufacturing facilities. Managed by the Department of Defense under NAICS code 334220, this opportunity is centered in Aberdeen Proving Ground. The solicitation was posted on October 27, 2026, with a response deadline set for November 9, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

VHF Portable Radio Component SupplyThe VHF Portable Radio Component Supply subcontract involves the provision of electronic components, housings, and sub-assemblies for prime contractors supporting Army Contracting Command-Aberdeen Proving Ground projects. The scope of work includes the manufacture of radio chassis, circuit boards, antennas, and specialized VHF frequency components. All deliverables must be produced using VHF-band compatible electronics and ruggedized plastics or metals in strict accordance with Motorola OEM and FAR 12.102 standards. Managed by the Department of Defense under NAICS code 334220, the contract requires the delivery of finished components to designated manufacturing facilities. Performance will take place at Aberdeen Proving Ground. Interested parties must adhere to the response deadline of November 9, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-STD Environmental Testing ServicesThe MIL-STD Environmental Testing Services subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves performing critical environmental qualification testing for prime contractors. The scope of work focuses on aircraft interior decontamination projects for the Joint Project Manager for CBRN Special Operations Forces. The selected provider will conduct chamber evaluations and environmental stress testing, utilizing temperature, humidity, and vibration chambers to verify equipment survival in austere environments. All testing activities must strictly adhere to MIL-STD-810H standards, with the final deliverable being comprehensive environmental qualification test reports. This opportunity falls under NAICS code 541380 and is designated for performance in Abell. The response deadline for this requirement is November 24, 2026.

Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

Tactical Chassis FabricationThe Tactical Chassis Fabrication subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves the production of lightweight and ruggedized housing and chassis for aircraft interior decontamination projects. These components are designed for the Joint Project Manager for CBRN Special Operations Forces and must be manufactured using composite materials and lightweight alloys. Each enclosure is required to fit within a 42 by 18 by 18 inch envelope and maintain a total weight of 150 pounds or less. To ensure operational viability, all deliverables must adhere to MIL-STD-1472 human engineering and lift requirements, resulting in a transportable chassis with integrated stowage. The project is categorized under NAICS code 332312 and will be performed in Abell. Interested parties must submit their responses by the deadline of November 24, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Aircraft Power Interface & Electrical EngineeringThis subcontract, titled Aircraft Power Interface and Electrical Engineering, is issued by the Department of Defense under agency W6QK Acc-Apg. The project focuses on the design and supply of power architecture for prime contractors supporting Joint Project Manager for CBRN Special Operations Forces aircraft interior decontamination projects. The scope of work involves engineering systems for 120 VAC, 28 VDC, and aircraft utility power using power converters, voltage regulators, and MIL-SPEC connectors, with a final delivery of an integrated power supply module and aircraft interface cabling. Strict adherence to MIL-STD-1275 and MIL-STD-704 is required for all engineering work. The contract is categorized under NAICS code 335999 and will be performed in Abell. Interested parties should note the response deadline of November 24, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Corrosion-Resistant Fluid Systems SupplierThis subcontract with the Department of Defense involves the sourcing and fabrication of wetted-path components for aircraft interior decontamination projects managed by the Joint Project Manager for CBRN Special Operations Forces. The supplier is responsible for providing chemical-resistant pumps, seals, lines, and nozzles designed to withstand harsh agents including H2O2, modified amine/ammonia, Dahlgren Decon, and JGPD. To ensure durability and safety, components must be manufactured using fluoropolymers such as PTFE and PFA, specialized elastomers, and corrosion-resistant alloys, with all materials requiring formal compatibility certifications. The project is categorized under NAICS code 325211 and is managed by the W6QK Acc-Apg agency. Performance for this contract is centered in Abell, with a response deadline set for November 24, 2026. The primary objective is to deliver high-performance fluid systems that maintain integrity when exposed to aggressive decontamination chemicals in specialized military aviation environments.

Plastics Material and Resin Manufacturing

POSTED

about 23 hours ago

DEADLINE

Dry Fog/Aerosol Generator SpecialistThis subcontract opportunity with the Department of Defense, managed by W6QK Acc-Apg, seeks a Dry Fog/Aerosol Generator Specialist to support Joint Project Manager for CBRN Special Operations Forces aircraft interior decontamination projects. The selected provider will design, manufacture, and integrate core aerosolization mechanisms, including high-precision nozzles, dispersal manifolds, and ultrasonic or pneumatic atomizers. The primary objective is to produce a functional generation module capable of creating gas molecules or non-condensing dry fogs with droplet sizes under 10 microns. Technical requirements specify that all provided technology must have a Technology Readiness Level of 6 or higher. Interested parties must respond by November 24, 2026, for this project which falls under NAICS code 339999. The work is associated with performance locations in Abell, and the contractor will serve as a specialist supplier to prime contractors overseeing the broader decontamination initiative.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

Tower Equipment and Parts ManufacturingThis subcontract, titled Tower Equipment and Parts Manufacturing, involves the production and delivery of specialized structural and electronic components for prime contractors supporting the Iraq Army Special Missions Team. The primary objective is to provide the necessary parts to maintain the Iraq Army's existing Tower program, with performance taking place in Iraq under the oversight of the Department of Defense agency W6QK Acc-Apg. The contract requires strict adherence to Berry Amendment specialty metals restrictions as outlined in DFARS 252.225-7008 and 252.225-7009. Classified under NAICS code 332312, the opportunity was posted on October 27, 2026, with a response deadline of November 10, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 23 hours ago

DEADLINE

Aerostat Equipment and Parts ManufacturingThis subcontract involves the manufacture and delivery of specialized parts and equipment for prime contractors supporting the Iraq Army Special Missions Team. The primary objective is to produce essential components necessary for the maintenance of the Iraq Army's current Aerostat program, with performance taking place in Iraq. Managed by the Department of Defense under agency W6QK Acc-Apg, the contract requires strict adherence to Berry Amendment specialty metals restrictions as outlined in DFARS 252.225-7008 and 252.225-7009. The opportunity falls under NAICS code 336413, with a response deadline set for November 10, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

RX Modem SupplyThis subcontract, managed by the Department of Defense agency W6QK Acc-Apg, involves the procurement and delivery of 15 radio frequency receiving modems, specifically part number 377098-4H. These units are intended for prime contractors working on U.S. Army CECOM SAMD projects to support the Iraq Army Special Missions Team, with the place of performance located in Iraq. The contract falls under NAICS code 334220 and mandates strict adherence to Berry Amendment specialty metals restrictions as outlined in DFARS 252.225-7008 and 252.225-7009. The solicitation was posted on October 27, 2026, with a response deadline set for November 10, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Pre-Solicitation Motorola

Solicitation # PRESOLICITATIONMOTOROLA

The Army Contracting Command-Aberdeen Proving Ground (ACC-APG) Division D intends to award a sole source firm-fixed price contract to Motorola Solutions, Inc., identified by CAGE code 78205. This procurement is conducted under FAR 12.102 for the acquisition of commercial products and services and is designed to support the Communications-Electronics Command Security Assistance Management directorate (CECOM SAMD) under Foreign Military Sales Case WD-B-UDC. As the Original Equipment Manufacturer, Motorola Solutions, Inc. is the intended recipient of the award. The scope of the requirement includes the procurement of 34,950 Portable Two-Way VHF Radios, 2,100 Portable Two-Way UHF Radios, and 10,690 Mobile Two-Way VHF Radios. Interested parties must identify their interest and capability to respond by November 9, 2026, at 4:00 PM EST. The primary point of contact for this action is Emanuel Green, with Christopher Gaines serving as the secondary point of contact.

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS