Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MODULATOR ASSEMBLY,

Active
SPE4A5-26-T-325GFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of one unit of a Modulator Assembly, Exciter, Ignition, identified by NSN 2920-01-573-0929 and part numbers 0-300-261-01 for Honeywell International Inc. and V0-300-261-01 for Vericor Power Systems LLC. It is classified as a commercial item and is designated as a critical application item requiring strict adherence to labeling, packaging, and marking standards per MIL-STD-129 and MIL-STD-2073-1E, with no special marking codes required. Packaging must comply with DLA packaging requirements, including use of intermediate and unit containers coded E5, and palletization standards. The item is subject to tailored higher-level quality requirements, and inspection and acceptance occur at the destination. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331, Table 1, with zero nonconformances allowed unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Delivery is due in 171 days, with an original required delivery date of September 25, 2027, and a need ship date of January 31, 2027. The contract specifies FOB origin delivery, with zero variance permitted in quantity, and requires compliance with hazardous materials shipping protocols. The item is not subject to Item Unique Identification per customer request. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with the procurement executed under a total small business set-aside, NAICS code 333611. All documentation, including unit of issue and transportation instructions, references DLA procedural notes and official DLA web resources. The sole point of contact for the solicitation is Evgeny Korovin, and the delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania.

General Info

One Modulator Assembly procured under small business set-aside, FOB origin, due Jan 31, 2027, per DLA and military packaging standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

333611 - Turbine and Turbine Generator Set Units ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(1)

SPE4A5-26-T-325G.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
EVGENY KOROVIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MODULATOR ASSEMBLY,
EXCITER, IGNITION
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
--
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
--
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
--
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC. 99193 P/N 0-300-261-01
VERICOR POWER SYSTEMS LLC 1N8S8 P/N V0-300-261-01
SPE4A5-26-T-325G
SECTION B
PR: 7017741672 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741672 0001 EA 1.000
NSN/MATERIAL:2920015730929
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A5-26-T-325G
SECTION B
PR: 7017741672 PRLI: 0001 CONT’D
Need Ship Date:01/31/2027 Original Required Delivery Date:09/25/2027
SPE4A5-26-T-325G NSN/Part Number: 2920-01-573-0929 Quantity: 1 EA Purchase Request: 7017741672QTY: 1 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333611
New
DIBBS
BLADE SET, COMPRESSO
Solicitation # SPE4A6-26-T-12LW
This contract pertains to the procurement of a single blade set for a non-aircraft gas turbine compressor, identified by part number 10-10012-01, manufactured by Honeywell International Inc. and sourced through Vericor Power Systems LLC. The item is governed by stringent technical and quality requirements incorporated from the DLA Master List, with compliance mandated across manufacturing, documentation, packaging, and inspection processes. All supplies must meet zero-defect sampling standards under MIL-STD-1916 or equivalent zero-based plans, with critical attributes requiring the strictest verification levels. The blade set is designated as a critical application item and must be mercury-free, with no intentional use of mercury or mercury-containing compounds except in permitted exceptions such as specified instruments or batteries, all of which must include secondary containment per NAVSEA standards. Packaging and marking must fully adhere to MIL-STD-2073-1E and MIL-STD-129, with individual blades separated to prevent contact and damage, and palletization conforming to DLA packaging requirements. The delivery is FOB origin, with inspection and acceptance performed at origin, and the item must be delivered within 20 days to Camp Pendleton, California, via traceable means exclusively—parcel post is prohibited. The NSN is 2835-01-538-6223, and the contract includes specific logistics, transportation, and marking directives, with a required delivery date of July 29, 2026. Configuration control, engineering change proposals, and deviation requests are tightly managed under RQ002, and all documentation must support source approval per RC001. The contract enforces full traceability, government identification removal procedures for non-accepted items, and tailored quality requirements applicable to both manufacturers and non-manufacturers.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
NOZZLE ASSEMBLY
Solicitation # SPE8E5-26-T-3771
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333611
New
Federal
NSN 2835-01-152-6306, FUEL CONTROL SERVOVALVE, WSDC: 05F, AIRCRAFT, STRATOLIFTER C/KC
Solicitation # SPE4A726R0746_SourcesSought
The Defense Logistics Agency Aviation is conducting market research to identify qualified sources capable of manufacturing or legitimately obtaining the fuel control servovalve with NSN 2835-01-152-6306, a critical aircraft component used in the Stratolifter C/KC fleet under Weapon System Designator Code 05F. Currently, this item is sole sourced from RTX Corporation under part number 161403-3 and Woodward Inc under part number 100312-003, and the agency seeks to determine whether alternative suppliers can meet or exceed the existing quality and performance standards. This sources sought notice is strictly for market research purposes and does not constitute a solicitation, request for proposal, or binding commitment by the government; no funds are available for response preparation, and submissions are voluntary. Interested parties must submit their responses by August 10, 2026, at 10:00 a.m. Eastern Standard Time via email to Tatjana Klemmer at tatjana.klemmer@dla.mil. Companies wishing to become approved sources must complete a Source Approval Request (SAR) package, following the guidelines outlined in the Aviation Source Approval and Management Handbook, which requires comprehensive documentation to prove technical equivalence or superiority to the current approved item. The SAR process involves detailed demonstrations of manufacturing capability, quality control systems, and adherence to regulatory standards under the Competition in Contracting Act, FAR, and DFARS, and reviews may take more than 180 days. The contracting office is located at 6090 Strathmore Rd., Richmond, VA 23237, and submissions must align with DoD procedures for electronic transmission when applicable.
DLA Aviation

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333611
New
Federal
TURBINE ROTOR,TURBI
Solicitation # N0010426QJC05
This contract solicits repair services for the TURBINE ROTOR, TURBI under a firm-fixed-price structure with a required Repair Turnaround Time (RTAT) of 370 days, measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. All repairs must comply with the original manufacturer’s specifications, MIL-STD-130 Rev N marking requirements, and approved technical documentation, with no design or part substitutions permitted without prior written approval from the NAVICP-MECH Contracting Officer. Government Source Inspection is mandatory, and the contractor is responsible for all inspection and testing, maintaining complete records for 365 days after final delivery. Freight is FOB Origin, and the Navy handles logistics per the CAV Statement of Work. The contract includes options to increase quantity within 365 days after award, with pricing locked at the bid rate unless otherwise negotiated. Failure to meet the RTAT results in a per-unit, per-month price reduction, capped at a specified maximum, without limiting the Government’s right to terminate for default. The contractor must be an authorized distributor of the original manufacturer, with proof provided at submission, and must certify compliance with Buy American and small business subcontracting requirements. Cybersecurity maturity certification and security exclusions under recent deviations are enforceable, and all documentation is subject to Distribution Statement controls per OPNAVINST 5510.1. Pricing must be justified if not aligned with historical data or commercial sales, and if an item is deemed beyond economic repair, a negotiated T&E fee not to exceed a specified amount may apply. The award will be bilateral, requiring signed contractor acceptance before execution, and all quotes must include unit and total prices, RTAT, and details on new unit pricing and lead time for comparison purposes. The contract is administered by NAVSUP WSS in Mechanicsburg, PA, with Kristina L. Alexander listed as the point of contact.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333611
New
DIBBS
BLOCK, PIVOT
Solicitation # SPE7L1-26-T-906P
This contract, identified by solicitation number SPE7L1-26-T-906P, is issued by the Department of Defense through the Land Supply Chain under the DLA for the procurement of a single unit of a BLOCK, PIVOT component with NSN 2825-00-385-9399, tied to Siemens Energy part numbers including B30742, E16592PC29, E16593PC30, G8788PC46, G9098-1PC45, G9098PC45, G9181PC46, and M271R. The item must be delivered within five days of contract award, FOB origin, with zero variance in quantity, and is subject to strict packaging standards per ASTM D3951, superseded where applicable by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must comply with MIL-STD-129, and palletization must adhere to RP001 requirements. The use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute materials require prior approval unless explicitly authorized by the specification. The delivery destination is SWEIHAN AIR BASE in AE, with the shipment tagged for RDD 999/NMCS and governed by DLA procurement notes C19 and C20 regarding transportation and first destination transfers. The required delivery date is July 31, 2026, and inspection and acceptance will occur at the destination. Technical compliance is mandatory, and all government-specific identifiers must be removed from non-accepted supplies. The contract is managed under a federal acquisition framework, with Kristina Derry as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
SEAL, METALLIC, NONAI
Solicitation # SPE7M4-26-T-298C
The contract specifies the procurement of one metallic non-ai seal with NSN 2835-01-732-7814 and part number 16196 from Eaton Corporation, to be delivered FOB origin within 392 days of contract award, with no tolerance for quantity variance. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special marking codes, and palletization in accordance with DLA standards. The item must not contain any Class I ozone-depleting chemicals, a prohibition that overrides any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Delivery is directed to DLA Distribution Cherry Point in North Carolina, with inspection and acceptance occurring at the destination. Transportation logistics are governed by DLA procedural notes C19 and C20, and all unit of issue requirements align with DoD standards. The solicitation was issued under SPE7M4-26-T-298C with a response deadline of August 14, 2026, and the item falls under NAICS code 333611 for fluid handling systems. The primary point of contact is Rory O’Reilly of the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
Federal
BLADE,TURBINE ENGIN - NSN: 2835 014578177
Solicitation # SPRMM1-26-Q-HE15
DLA Weapons Support Mechanicsburg is seeking potential suppliers for the turbine engine blade with NSN 2835-014578177 and part number L47576P01, an item exclusively designed and manufactured by General Electric Company, identified by Cage Code 07482. Non-OEM sources must submit complete and verifiable traceability documentation proving the material lineage back to the original manufacturer; failure to provide this information will result in non-responsiveness. Interested parties must complete a market survey and email it to Andrew Etheredge at ANDREW.ETHEREDGE@DLA.MIL no later than 4:30 PM EST on August 14, 2026. This notice is strictly for market research and does not constitute a solicitation, request for proposal, or binding commitment from the government. No funds are available to cover response preparation costs, and submissions are wholly voluntary. The solicitation number is SPRMM1-26-Q-HE15, and the NAICS code is 333611, with the office located in Mechanicsburg, Pennsylvania.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
Federal
BEARING ASSEMBLY,JO
Solicitation # SPRMM126QMF07
This contract pertains to the procurement of the BEARING ASSEMBLY, JO, under solicitation SPRMM1-26-Q-MF07, issued by SPRMM1 DLA Mechanicsburg on behalf of the Department of Defense. The requirement specifies the manufacture and delivery of 20 units with NSN 7HH 2825-00-296-0690 PP and applicable reference part numbers 90099 715J759A01 and 90099 715J759G01, all to be produced in compliance with MIL-STD-130 Rev N for item marking and MIL-STD-2073 for packaging, with preservation levels determined by shipment type: Level B for domestic and air shipments, Level A for surface overseas. Inspection and acceptance are to occur at the contractor’s facility per DLA Procurement Note E06 and FAR 52.246-2, with the contractor responsible for all inspection activities and record retention for 365 days post-delivery. The Government retains the right to conduct independent inspections to verify conformity. Award will be made using the Lowest Price Technically Acceptable (LPTA) methodology under DFARS 215.101-2-70(a)(1)(i), requiring full compliance with solicitation terms without exceptions. Offers must be submitted electronically by 4:30 PM local time on June 26, 2026, and non-manufacturers must disclose the OEM, CAGE code, and part number. Electronic Data Interchange submissions must explicitly note any deviations from specifications, or the offer will be evaluated solely against solicitation criteria. All contractors must maintain current representations and certifications in SAM, including compliance with FAR 52.204-7 and DFARS 252.204-7016, and adhere to cybersecurity requirements outlined in NIST SP 800-171 and the Controlled Unclassified Information (CUI) Registry, with any cloud service providers meeting FedRAMP Moderate baseline standards. The contract enforces Buy American provisions and Combating Trafficking in Persons clauses, and requires use of WAWF for electronic invoice and receiving report submissions via PIEE. Unit packaging must be marked per MIL-STD-129 including Procurement Instrument Identifier, CLIN, and SubCLIN; Depot
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
Federal
BLADE,TURBINE ENGIN - NSN: 2835 014575652
Solicitation # SPRMM1-26-Q-HE16
DLA Weapons Support Mechanicsburg is seeking potential suppliers for a turbine engine blade identified by NSN 2835-014575652, part number L47571P01, which is an item originally manufactured by General Electric Company with CAGE code 07482. Non-OEM suppliers must provide complete traceability documentation that reliably connects the material back to the original manufacturer; failure to submit this information will result in a non-responsive offer. Interested parties are required to complete and submit a market survey via email to Andrew Etheredge at ANDREW.ETHEREDGE@DLA.MIL no later than 4:30 PM EST on August 14, 2026. This announcement is strictly for informational purposes and does not constitute a solicitation, request for proposal, or any binding commitment from the government. No funds are allocated for the preparation of responses, and submissions are entirely voluntary with no expectation of contract award. The action is managed under solicitation number SPRMM1-26-Q-HE16, with the North American Industry Classification System code 333611, and the office is located in Mechanicsburg, Pennsylvania.
SPRMM1 DLA Mechanicsburg

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
Cooling System Pump SupplyThe contract involves the supply of a single Cooling System Pump identified by NSN 2930016634578, requiring full manufacturing, rigorous testing, proper packaging, and secure shipping in strict adherence to all applicable military standards. The scope encompasses end-to-end delivery of the unit, ensuring it meets the technical and quality requirements mandated by defense specifications for operational reliability and performance in field environments. The solicitation is a subcontract under the Department of Defense’s Land Supply Chain, with performance required at Fort Hood, Texas, ZIP 76544-0000. The NAICS code 333611 identifies the industry as Pump and Pumping Equipment Manufacturing. The posting date is August 2, 2026, and responses must be submitted by August 13, 2026. The contract is managed through the DIBBS platform, and all activities must align with federal defense procurement protocols, though no specific set-aside or contracting office contact details are provided.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
DIBBS
PACKING RING ASSEMB
Solicitation # SPE7L5-26-T-4733
This contract pertains to the procurement of a packing ring assembly identified by NSN 2825-00-421-7496 and part number 571L146PC43, with a total quantity of 13 units under unit of issue AY. The requirement is governed by stringent packaging and preservation standards per MIL-STD-2073-1E and MIL-C-16173, mandating immediate preservation of ferrous metal labyrinth packing rings with P-2 preservative after cleaning, while nonferrous materials are exempt. Each ring segment must be individually bagged and overwrapped with quarter-inch thick cushioning material conforming to PPP-C-850, Type II, Class 1, segregated by ASTM D4727 fiberboard separators and cushioned within the container with at least one inch of compliant cushioning material. Sets weighing under 40 pounds must be packaged in ASTM D5118 fiberboard boxes, while those 40 pounds or heavier require overseas-style wood boxes per ASTM D6251 or PPP-B-621, closed and strapped with flat steel strapping conforming to ASTM-D-3953 Finish C. All packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, with no allowance for quantity variance. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the required delivery date is 86 days from the contract award, with a need ship date of August 4, 2026, and original delivery due by September 11, 2026. The item is designated as a critical application and is subject to DLA’s technical and quality requirements referenced through the DLA Master List, and the supplier must comply with mercury restrictions, prohibiting intentional addition or direct contact unless exempted for specific functional uses such as batteries or sensors, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Additionally, the contractor must maintain CMMC Level 2 cybersecurity self-assessment compliance and fulfill all terms under a Total Small Business Set-Aside, with performance addressed to the DLA San Joaquin Distribution Center in Tracy, California.
LAND SUPPLIER OPNS ENGINES

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 333611
New
DIBBS
COVER ASSEMBLY, GOVERNO
Solicitation # SPE4A5-26-T-319E
The contract pertains to the procurement of a Cover Assembly, Governor, identified by part number 75842-53 and NSN 2910-01-013-4749, with a required quantity of three units to be delivered within twenty days of contract award. The item is classified as a critical application item and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific revisions controlling based on the acquisition type and amendment dates. Mandatory documentation includes source approval requests, cybersecurity compliance at CMMC Level 2, and adherence to DLA packaging requirements. The item is not subject to Unique Item Identification per customer request, and physical marking must follow MIL-STD-129 without special codes. Inspection and acceptance occur at origin under zero-defect sampling criteria based on MIL-STD-1916 or a comparable zero-based plan, with attributes assigned strict verification levels or AQLs. Packaging must conform to MIL-STD-2073-1E with specified methods for preservation, wrapping, and containment, and palletization must meet DLA standards. Delivery is FOB origin to the Parts-Attach General Depot in Tainan, Taiwan, with freight handled per DLA procedural notes and government-designated forwarding instructions. The solicitation was issued on August 2, 2026, with responses due by August 10, 2026, and the required delivery date is August 4, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The U.S. Department of Defense, through DLA Aviation, is soliciting quotes for six Air Battery Chargers with NSN 4920014982543 under solicitation number SPE4A526T326V, which is a Small Business Set Aside for total award. The requirement is for delivery to W1A8 DLA DISTRIBUTION within 171 days after award, and only approved sources identified as 3RCD2 4159-MIL and 3RCD2 CA 1550 MIL are eligible. This is an electronic request for quotation with no hard copies available, and specifications, plans, or drawings are not provided. All responsible sources may submit a quote electronically, provided it is received by the deadline of August 12, 2026. The solicitation is classified under NAICS code 334419, and inquiries must be directed via email to DibbsBSM@dla.mil, with further details accessible through the SAM.gov link or DIBBS portal using the solicitation number. The contracting office is located in Richmond, Virginia.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details