Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MODULE, OPER PRESENC

Active
SPE7M5-26-Q-0758Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a MODULE OPER PRESENCE item identified by NSN 5999-01-575-6564, with a quantity of ten units to be delivered within 100 days after order date. All supplies must comply with stringent DLA packaging standards as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging methods, containment materials, and palletization requirements aligned with RP001. The item is subject to strict prohibition of mercury and ozone-depleting substances, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, weapon systems, and naval-specified reagents, and requires secondary containment for mercury-bearing portable devices per NAVSEA 5100-003D. No class I ozone-depleting substances may be used in manufacturing or processing without explicit written approval from the contracting officer, and this restriction overrides any conflicting specification unless the item qualifies as commercial under FAR 11.001. Contractors seeking to substitute the approved source must submit documentation from the original manufacturer for prior approval. Delivery is FOB origin to DLA Distribution San Joaquin in Tracy, CA, with inspection and acceptance occurring at the destination. The unit of issue is each, with zero variance allowed, and special marking is not required. Technical data is not available at the issuing center. The solicitation number is SPE7M5-26-Q-0758, with a response deadline of August 1, 2026, and a performance address tied to the government warehouse in Tracy. The item is linked to purchase request 7017039444 with a required ship date of September 17, 2026.

General Info

Procure ten MODULE OPER PRESENCE units, NSN 5999-01-575-6564, FOB origin, comply with MIL-STD packaging, zero mercury/ozone-depleting substances, deliver by September 17, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-Q-0758.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
TATE SHANNON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MODULE,OPER PRESENCE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
TECHNICAL DATA IS NOT AVAILABLE AT THIS CENTER.
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
Contractors offering either an Administrative Part Number change OR a Superseding Item in replacement of the Approved Source, MUST provide documentation from the Approved Manufacturer, So the Product Specialist or Authorizing Engineering Support Activity(s) may Approve offer before award if possible, else the offer will only be considered for future solicitations.
HYSTER-YALE GROUP, INC. 30076 P/N 2078333 HYSTER-YALE GROUP, INC. 04627 P/N 853000585
IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M5-26-Q-0758
SECTION B
SUPPLY/SERVICE: 5999-01-575-6564 CONT'D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 5999-01-575-6564 10.000 EA $ _______________ $ ______________
MODULE,OPER
PRESENC
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 100 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017039444 0001 N/A N/A N/A 09/17/2026

SPE7M5-26-Q-0758 NSN/Part Number: 5999-01-575-6564 Quantity: 10 EA Purchase Request: 7017039444QTY: 10 Delivery: 100 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333924
New
Federal
Mulcher AttachmentThe contract is for a mulcher attachment compatible with the 2026 John Deere MH60, solicited under number M0068126Q0058 with a posting date of July 24, 2026, and a response deadline of July 29, 2026. This solicitation is a total small business set-aside under the Small Business Administration, classified under NAICS code 333924, which pertains to other farm machinery and equipment manufacturing. The procuring entity is the Department of Defense, specifically the Office of the Commanding General, located at Camp Pendleton, California, with the primary point of contact being Gabriel Lopez and secondary contact Marcus Schnars, both reachable through marcusschnars@usmc.mil. The equipment is intended for delivery to the place of performance in Twentynine Palms, California, 92277, where it will support operational needs. The contract is accessible via the SAM.gov portal for interested small business vendors.
Commanding General

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333924
New
Federal
3930--MEC MICRO 26-XD SCISSOR LIFTThe U.S. Department of Veterans Affairs, through Network Contracting Office 6, is conducting market research to identify qualified vendors capable of supplying one MEC Micro 26-XD Scissor Lift with Xtra-Deck for delivery to the Hampton VA Medical Center in Salem, Virginia. This effort uses the NAICS code 333924 for Industrial Truck, Tractor, Trailer and Stacker Machinery Manufacturing, with a small business size standard of 900 employees, and seeks to determine whether a future procurement can be awarded on a brand name or equal, unrestricted basis. Vendors must provide detailed information including company name, address, point of contact, tax ID, DUNS number, Unique Entity ID, GSA schedule details if applicable, capabilities statement, and socio-economic status such as small business, SDVOSB, or WOSB. Non-OEMs must submit proof of authorized distributor status, and all respondents must be currently registered in the System for Award Management under the specified NAICS code. Responses must be submitted via email to Kenneca.Crump@va.gov no later than 9:00 AM EST on July 28, 2026, with the RFI number 36C24626Q0832 included in the subject line, and must be in Microsoft Office or PDF format. The government will not reimburse any costs associated with preparing responses, nor will it engage in discussions or provide debriefings following submission. This request is strictly for market research purposes to inform future acquisition strategies, and any information gathered may be incorporated into a subsequent solicitation. The place of performance is Salem, Virginia, and all items must meet or exceed the specified product requirements, with like alternatives requiring full technical documentation for evaluation.
246-NETWORK Contracting Office 6 (36C246)

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 333924
New
Federal
Electronic Scissor LiftThe contract calls for an electronic scissor lift branded as JLG or an equal model with part number ES1932, designed for both indoor and outdoor use with a 24V DC electric drive system for high efficiency. The unit must have a maximum width of 32 inches to navigate standard doorways and a stowed height of 78.2 inches, weighing no more than 3,450 lbs. It must achieve a platform height of at least 19 feet and support a minimum load capacity of 507 lbs, with an extendable deck offering at least 36 inches of additional outreach. The lift must accommodate two personnel indoors and one outdoors and be operable while fully elevated, with a minimum gradeability of 25 percent. Safety features include quickly folding rails equivalent to QuikFold, an active pothole protection system, and a load sensing system to enforce safe operational limits. The operator platform must include a built-in USB charger and a device holder for convenience. This is a total small business set-aside under NAICS code 333924, solicited by the U.S. Army at Fort Drum, New York, with responses due by July 31, 2026, and the contract was posted on July 24, 2026. Primary point of contact is Sarah Long, with secondary contact Mark Hill providing additional support.
W6QM Micc-Ft Drum

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333924
New
Federal
Diesel 5k forklifts
255-NETWORK Contract Office 15 (36C255)

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 333924
New
Federal
ECS 65 ForkliftsThe contract titled ECS 65 Forklifts is a total small business set-aside solicitation under the NAICS code 333924, exclusively reserved for small businesses as defined by the SBA. It was posted on July 22, 2026, with a firm response deadline of July 28, 2026, and is issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The contract seeks the procurement of ECS 65 forklifts, with the place of performance designated as a zip code of 01434, though the specific city and state are not provided in the data. Guillermo Ramos serves as the primary point of contact, reachable via email at guillermo.ramos1.civ@army.mil or by phone at 6095627558. This is a combined solicitation meaning it integrates both the solicitation and the contract award processes, and interested small businesses must respond before the deadline to be considered for award under the set-aside program.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 333924
New
Federal
3990--Mt. Home Reach Truck Intent to Sole Source
249-NETWORK Contract Office 9 (36C249)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333924
New
Federal
TractorThe contract solicitation is for a CAB TRACTOR under solicitation number W911S226U3644, issued by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a postal code of 13602-5220. The opportunity is posted as a combined solicitation with no specific set-aside designation and carries a NAICS code of 333924, indicating it pertains to agricultural, construction, and mining machinery manufacturing. Responses are due by July 16, 2026, at 2:00 PM Eastern Time, and the posting date is July 9, 2026. The place of performance is identified with a zip code of 66442, though no specific city or state is provided for the performance location. Primary point of contact is Gary Jungels, reachable at 520-945-4198 and gary.j.jungels.civ@army.mil, with secondary contact Yvonne Johnson-Wilson at 520-945-4596 and yvonne.a.johnson-wilson.civ@army.mil for additional inquiries. Full details and the opportunity page can be accessed via the SAM.gov link provided.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 333924
New
Federal
Tractor Purchases for the Forest ServiceThe U.S. Department of Agriculture, through its Forest Service office in Albuquerque, New Mexico, is soliciting bids for the purchase of tractors under a total small business set-aside authorized by the Small Business Administration. This combined solicitation, identified by number 127EY26Q0107, was posted on July 19, 2026, with a response deadline of July 30, 2026, at 9:00 p.m. Eastern Time. The NAICS code 333924 applies to this procurement, indicating the acquisition of agricultural, construction, and mining machinery. All offerors must be small businesses as defined by the SBA, and the contract is exclusively reserved for such entities. The tractors are to be delivered and performed at a location in California, though the exact site is listed only by a numeric identifier. Primary point of contact for inquiries is Jasmine Williams, reachable via email at jasmine.williams@usda.gov. Further details including specifications and requirements are contained in the attached documents accessible through the provided SAM.gov link.
Csa Southwest 1 Usda-Fs

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333924
New
Federal
Supply and Deliver Forklift
W07V Endist St Louis

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333924
New
Federal
NCFI Forklifts
U S Secret Service

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 333924
New
Federal
TX-ANAHUAC NWR-FIELD CULTIVATOR
Sat Team 2 Fws

POSTED

1 day ago

DEADLINE

in 17 days
View Details
NAICS: 333924
New
DIBBS
Manufacture of Hand Trucks / Platform TrucksThe contract entails the full manufacturing of 109 hand trucks or platform trucks in strict compliance with military specifications, covering all stages from fabrication and assembly to quality control, packaging, and final delivery. All work must be completed and delivered within a strict 149-day timeframe, starting from the award date, to meet operational requirements. The project is classified as a subcontract under the NAICS code 333924, indicating it pertains to other commercial and industrial machinery manufacturing, and is being managed by the Department of Defense through the organization Construction & Equipment Manu & Con. Performance of the contract is required at NEW CUMBERLAND, Pennsylvania, with a ZIP code of 17070-5002, and the solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026. Although no specific set-aside type or point of contact is provided, the nature of the requirement and its military specifications imply rigorous technical and compliance standards, and the delivery timeline underscores the urgency and precision expected from the contractor. The contract opportunity is accessible via the DIBBS platform under reference number SPE8EF26T1480.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of a single electrical connector receptacle identified by NSN 5935-01-408-8412 and part number M83723/72G2443N, compliant with MIL-DTL-83723H Rev H and MIL-DTL-83723/72E Rev E standards. The item is subject to strict quality controls as it is listed on the Qualified Products List and must meet all requirements outlined in Procurement Note H01 for FSC 5935 connector assemblies and contacts. The use of ozone-depleting substances is strictly prohibited in any phase of manufacture or processing unless formal written approval is obtained from the contracting officer, and all packaging must adhere to MIL-STD-2073-1E and DLA’s proprietary packaging requirements, including marking per MIL-STD-129 with no special markings required. The item must be shipped via traceable means, explicitly excluding parcel post, and delivered to the specified government facility in Klamath Falls, Oregon. The pricing is firm fixed at one unit, with zero tolerance for variance in quantity, and delivery is mandated within 150 days after the order date. Inspection and acceptance occur at the destination point, with FOB origin terms applying. The contract is governed under DLA’s master technical and quality requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. All configuration changes require formal engineering change proposals for variance or waiver approvals. The solicitation number is SPE7M5-26-Q-0760, with a response deadline of August 1, 2026, and performance scheduled for delivery no later than June 29, 2026. The item falls under NAICS code 334417, procured by the Department of Defense through the Active Devices Division, with primary point of contact Shannon Tate.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
CIRCUIT CARD ASSEMBThe contract pertains to the procurement of 20 units of a circuit card assembly with NSN 5998-01-694-4978 under solicitation SPE7M5-26-Q-0757, with a response deadline of July 31, 2026, and a delivery requirement of 364 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization. The item contains covered defense information subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location and requiring strict adherence to DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and explicit DLA authorization. Removal of government identification from non-accepted supplies is required, and packaging must meet DLA standards. The contracting office is the Department of Defense’s Active Devices Division, with primary point of contact Thomas Mitchell, and performance is under U.S. jurisdiction.
Bare Printed Circuit Board Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of four electrical plug connectors identified by NSN 5935-01-369-5686 under solicitation SPE7M5-26-Q-0756, with a firm fixed price and zero tolerance for quantity variance. The item must comply with strict technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, including qualification standards from the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts. It must be manufactured to TDP Revision A Generation 1 in accordance with MIL-DTL-83723H(4) Sup 1 and referenced specification MIL-DTL-83723/95G(1), with physical identification and bare item marking as required. Packaging must adhere to DLA-specific guidelines, including MIL-STD-129 labeling, and conform to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with palletization following RP001. The unit of issue is each, and delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery deadline 169 days after order date. Inspection and acceptance occur at destination, and all packaging and marking must be performed in strict compliance with DLA directives that supersede commercial standards. The contract calls for transportation per DLAD procedural notes and lists the government point of contact and delivery details, with a scheduled ship date of January 15, 2027.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThe item is an electrical connector receptacle with NSN 5935-01-339-5850, requested in a quantity of 19 units under purchase request 7017601032, with a total quantity of 362 associated with the solicitation. Delivery is required within 129 days after the award date. The solicitation, issued by the Department of Defense’s Active Devices Division, carries the identification number SPE7M5-26-T-352E and was posted on July 23, 2026, with responses due by August 3, 2026. The NAICS code 334417 identifies this as part of the electronic component manufacturing sector. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Access is limited to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training on handling export-controlled technical data, and have received explicit approval from the DLA controlling authority. The primary point of contact for inquiries is Margaret Smith, reachable via email and phone provided, and performance is to occur in San Diego, California, 92136-3581.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECThe contract specifies the procurement of one electrical plug connector identified by NSN 5935-01-097-4219 and part number WTAX40SECSY from AIRBORN INTERCONNECT, LLC, under solicitation SPE7M5-26-T-349X. Delivery is required within ten days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 for labeling and marking. Hazardous material handling, if applicable, must follow Fed-Std-313 and TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable only if not overridden by DLA standards. Palletization must meet RP001 DLA packaging requirements, and the unit of issue is each (EA). The item is designated as a critical application component. The delivery destination is AL DHAFRA AIR BASE, AE, under military logistics code W910DH, with the shipment reference RDD 555 and project code 9AL TP 2. Transportation and freight instructions are governed by DLAD PROC NOTES C19 and C20. The contract mandates removal of government identification from non-accepted supplies and physical marking of the bare item. The original required delivery date is July 21, 2026, and the solicitation response deadline is August 3, 2026, with a post date of July 23, 2026. The primary point of contact is Margaret Smith of the Active Devices Division, Department of Defense, and the procurement falls under NAICS code 334417. Government use fields indicate specific distribution and forwarding codes for internal tracking.
Electronic Connector Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETICThe contract is for the procurement of two electromagnetic relays with part number RA-3100L and NSN 5945-01-464-8886, under solicitation SPE7M5-26-T-351S, which is a total small business set-aside. Delivery is required within 168 days from the contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 for marking, including special marking code ZZ for additional requirements, and must be palletized according to DLA standards. The relays must be free of intentional mercury or mercury compounds, except in limited exempted applications such as batteries, fluorescent lamps, sensors, or weapon systems approved by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment as per NAVSEA 5100-003D. Each individual unit package must be marked in accordance with IPC/JEDEC J-STD-609 to identify lead content and other attributes, with placement strictly following the standard’s guidelines. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. The required ship date is January 19, 2027, with an original delivery deadline of November 18, 2026. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List and are binding.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, CONNECTORThis contract is for the procurement of 10 units of an adapter connector with NSN 5935-00-201-2755 and part number 799-5 from Winchester Interconnect Corporation, under solicitation SPE7M5-26-T-341S. The item is classified as a critical application item and must comply with all DLA packaging, marking, and technical requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Strict prohibitions apply to the intentional use of mercury or mercury-containing compounds in the product, preservation materials, packaging, and marking, with narrow exceptions for specific functional uses such as batteries, fluorescent lamps, sensors, and weapon systems, provided they meet Navy specifications including double containment and shock-proofing per NAVSEA 5100-003D. All packaging must conform to MIL-STD-2073-1E using Method 31 preservation, D3 unit containers, and E-A wrap material, and all marking must adhere to MIL-STD-129 with no special markings required. Delivery is FOB origin, with a required delivery timeline of 168 days, and inspection and acceptance occur at destination. The unit of issue is each, with a fixed quantity of 10 units priced at $10.00 each for a total of $100.00 and no variance allowed. The contract mandates compliance with hazardous materials handling procedures per IP025 and prohibits mercury in any preservation or packaging components under IP056. The designated delivery point is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, and transportation guidelines are referenced in DLAD Proc Notes C19 and C20. The original required delivery date is October 7, 2026, with a need-by date of January 19, 2027. The contract falls under NAICS code 334220 and is managed by the Department of Defense’s Active Devices Division, with Margaret Smith listed as the primary point of contact. Solicitation was posted on July 23, 2026, with responses due by August 3, 2026. All contractual obligations are governed by the DLA Master List revision in effect on the solicitation issue date, and any amendments supersede prior versions.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, THERMALThe contract is for the procurement of a thermal resistor with NSN 5905-01-414-4341 and part number 406743078B, supplied by ABB Motors & Mechanical Inc, with a total quantity of 12 units at a unit price of $12.00, totaling $144.00. Delivery is required FOB origin within 168 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and packaging must conform to MIL-STD-2073-1E with specific preservation, wrapping, and container standards per QUP 001. Marking requirements follow MIL-STD-129 and include special code ZZ for additional specifications; additionally, each unit package must be marked per IPC/JEDEC J-STD-609 to indicate lead content and compliance with lead-free standards. Mercury and mercury-containing compounds are strictly prohibited unless explicitly allowed for functional components like batteries, lamps, or sensors, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier as per NAVSEA 5100-003D. The delivery address is DLA Distribution San Joaquin in Tracy, California, with a required ship date of January 19, 2027 and original delivery due by February 27, 2027. The contract is issued under solicitation SPE7M5-26-T-341C, with point of contact Jeanette Heisey, and is governed by DoD procurement regulations including unit of issue standards and transportation protocols outlined in DLAD proc notes C19 and C20.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
RESISTOR, FIXED, FILMThe contract specifies the procurement of a fixed film resistor with part number 5905014991408, sourced from Ohmite Holding, L.L.C., and governed by strict technical and packaging standards set by the Defense Logistics Agency. The item must comply with a source-controlled drawing and meet all technical and quality requirements referenced from the DLA Master List, with revisions controlled based on the solicitation or award date. The resistor must be marked in accordance with MIL-STD-129 and IPC/JEDEC J-STD-609, including specific lead finish标识 for Pb or Pb-free status on each unit pack, with placement strictly following the standard’s guidelines. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with each unit packed in E5 intermediate containers of 100 pieces, palletized per RP001, and labeled with special marking code ZZ for additional requirements. Delivery is required within 168 days to the DLA Distribution Depot Hill in Hill AFB, Utah, with no variance allowed in quantity and inspection and acceptance points set at destination. The item is designated as a critical application component, and only approved sources currently listed on the source-controlled drawing may fulfill the requirement, though future qualification is possible through direct contact with the cognizant design activity. The contract is issued under solicitation SPE7M5-26-T-346W with a response deadline of August 3, 2026, and an original delivery requirement of April 2, 2027, with a need ship date of January 19, 2027.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334416
New
DIBBS
CAPACITOR, FIXED, ELECTRThe contract solicits 181 fixed electrolytic capacitors with NSN 5910-01-595-5161 under solicitation number SPE7M5-26-T-348G, issued by the Department of Defense’s Active Devices Division. The requirement is governed by DLA packaging and technical quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. All offerors must comply with DLA packaging requirements and include complete data packages for both the approved and alternate part, as no data is currently available. Physical identification and bare item marking must adhere to RQ017 specifications, and non-accepted supplies must have government identification removed per RQ011. The delivery schedule mandates fulfillment within 168 days after order, with the place of performance specified as New Cumberland, PA, 17070-5002. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is categorized under NAICS code 334416 for electronic component manufacturing. Primary point of contact is Matthew Stanko, reachable via email and phone provided.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
MOTOR, CONTROLThis contract is for the procurement of motor control units under solicitation SPE7M5-26-T-343B, issued by the Department of Defense’s Active Devices Division as a Total Small Business Set-Aside. The item, identified by NSN 6105-00-942-2297 and part numbers from multiple qualified suppliers, requires 50 units to be delivered FOB origin within 40 days of contract award, with strict no variance in quantity. Delivery must be made to DLA Distribution Depot Hill at Hill AFB, Utah, following all DLA packaging directives, which mandate compliance with ASTM D3951 and MIL-STD-129 for marking and labeling, and require palletization per RP001 standards. The DLA Master List of Technical and Quality Requirements overrides any conflicting specifications and governs all technical and quality criteria referenced by R or I numbers. Inspection and acceptance occur at the destination, and the unit of issue is each (EA) at a fixed price of $50 per unit, totaling $2,500. The contract includes specific transportation guidelines and mandates that all packaging and documentation meet exact DLA requirements, with a required ship date of September 13, 2026, and an original delivery deadline of January 9, 2027. The solicitation closed on August 3, 2026, with primary point of contact Corey Carter available for inquiries.
Relay and Industrial Control Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
GUIDE, VALVE STEMThe contract pertains to the procurement of two valve stem guides, identified by NSN 4820-01-272-0561 and part number 7V18D0E01-5, supplied by Newmans Inc New Jersey Div 61661. The item is to be delivered FOB origin within 137 days of the contract award, with no variance allowed in quantity—exactly two units must be furnished. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods such as air evaporation drying and use of FA wrap material, with all units contained in D3 unit containers and E5 intermediate containers. Marking must follow MIL-STD-129 without any special codes, and palletization adheres to DLA packaging requirements. Delivery is directed to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, and transportation is governed by DLAD procedural notes C19 and C20. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the product, with limited exceptions for functional uses in batteries, instruments, or chemical reagents, and mandates a secondary containment barrier for any portable devices containing mercury as per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version effective on the solicitation issue date controlling. The solicitation number is SPE7M5-26-T-351F, with a response deadline of August 3, 2026, and the primary point of contact is Daniel Zimmerman at the Department of Defense’s Active Devices Division.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details