MOLDING COMPOUND

MOLDING COMPOUND
MOLDING COMPOUND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
Shelf-life Additional Requirements
UI = KT
6 GALLON KIT (5 GALLONS RESIN AND 1 GALLON HARDENER)
COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN
ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W
MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT
TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE
THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT
(THAT IS, 1 OF 2, 2 OF 2, ETC.)
CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE
OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS
WITHIN THE KIT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for
SPE8ES-26-T-1445
SECTION B
review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html PRODUCTS DELIVERED UNDER THIS CONTRACT SHALL BE MANUFACTURED TO ENSURE THAT A MINIMUM OF 85% SHELF LIFE IS REMAINING AT TIME OF RECEIPT BY THE FIRST GOVERNMENT ACTIVITY. SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH THE LATEST REVISION OF MIL-STD-129, AND SHALL CLEARLY INDICATE THE MANUFACTURED DATE AND THE INSPECTION/TEST DATE. MAGNOLIA ADVANCED MATERIALS, INC (22121) P/N MAGNOBOND 6021-A/6004-B [6 GALLON KIT (5 GALLONS RESIN AND 1 GALLON HARDENER)] RS051: Shelf life requirement RS001 for a TYPE 2 (CODE 2) item with a shelf life of 6 month (extendable) applies to this item.
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
IAW BASIC STD NR MIL-STD-129R(3)
REVISION NR R DTD 02/25/2023
PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-147F NOT 1
REVISION NR F DTD 09/05/2024
PART PIECE NUMBER:
IAW REFERENCE UNK FED-STD-313F
REVISION NR F DTD 10/12/2018
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8ES-26-T-1445
SECTION B
PR: 7016075605 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016075605 0001 KT 1.000
NSN/MATERIAL:8030013601583
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
TOS CODE = Z
TEMPERATURE FOR STORAGE (TOS) CODE = BELOW 75 DEG F
PARCEL POST ADDRESS:
N54075
CFLSW ASD DET FORT WORTH
1251 MILITARY PARKWAY
FORT WORTH TX 76127-1251
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N54075
AVIATION SUPPORT DETACHMENT
1251 MILITARY PARKWAY
FORT WORTH TX 76127-1251
US
M/F: (TCN) N540755117B106
RDD: 777
PROJ: AK1 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
SPE8ES-26-T-1445
SECTION B
PR: 7016075605 PRLI: 0001 CONT’D
DIC: A4A DIST: N9B ADV: FC: KB
Need Ship Date:00/00/0000 Original Required Delivery Date:05/01/2025
SPE8ES-26-T-1445 NSN/Part Number: 8030-01-360-1583 Quantity: 1 KT Purchase Request: 7016075605QTY: 1 Delivery: 20 days ADO