Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Defense was posted on July 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

MONITOR, TELEVISION

Closed
SPE4A7-26-T-600UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334220
New
DIBBS
ANTENNA SUBASSEMBLY
Solicitation # SPE7M0-27-T-0824
Solicitation SPE7M0-27-T-0824 is a small business set-aside request for the procurement of one antenna subassembly attenuator kit, identified by NSN 5985-01-524-5772 and part number 6521 from Spectrum Control Inc. The contract is managed by the DLA Weapons Support Maritime Supply Chain ESOC Buys, with a required delivery date of October 28, 2026. Delivery is specified as FOB Destination to the USS William P Lawrence DDG 110 at FPO AP 96671. The item is classified as an electrostatic and electromagnetic sensitive device, requiring specific precautionary packaging, handling, and processing at approved ESD workstations per MIL-HDBK-773. Technical and quality requirements are governed by the DLA Master List (RA001), with strict adherence to MIL-STD-2073-1E and Appendix D for kit packaging, and MIL-STD-129 for marking. The contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation incorporates various federal and defense clauses, including DFARS 252.204-7012 for cybersecurity and DFARS 252.204-7018 regarding prohibited telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System by November 9, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 12 days

AI Contract Overview

Show more

The U.S. Department of Defense, through the ASC SUPPLIER OPER AE AND AF DIV in Richmond, Virginia, is soliciting bids for two television monitors with NSN 5820-01-205-3103 under solicitation SPE4A7-26-T-600U, with responses due by August 6, 2026. The procurement is a simplified acquisition conducted via an electronic Request for Quotation (RFQ) on the DIBBS portal, and no hard copies are available. Delivery is required to W25G1U, W1A8 DLA DISTRIBUTION in New Cumberland, Pennsylvania, with a final delivery date of January 17, 2027, and a contractual delivery window of 163 days after order placement under FOB DESTINATION terms. All submissions must be electronic, and contractors must register on WAWF for invoice and payment processing, as IPP is not authorized. The contracting officer may award a firm-fixed price contract, though the exact type is pending completion in the award document. The monitors must comply rigorously with military standards for packaging and marking, including MIL-STD-2073-1E for preservation using Clean/Dry Method 41 without preservation materials, MIL-STD-129 for labeling with contract number, NAWC CAGE code, and part number permanently marked on bare items, and DLA’s RP001 for palletization. Barcoding per MIL-STD-129 is mandatory, but IUID is not required. Quality assurance requires the contractor to maintain a system certified to SAE AS9003 or ISO 9001, with inspection and acceptance occurring at origin using MIL-STD-1916 or ASQ H1331 sampling criteria and requiring zero non-conformances in critical areas. Hazardous materials must be identified per Federal regulations with completed Tables 1 and 2 for FIFRA, FFDCA, CPSA, FHSA, and FAA Act compliance, and mercury is strictly prohibited. Contractors must certify their entity status in SAM, provide UEI and CAGE codes, disclose any covered defense telecommunications equipment, and adhere to cybersecurity requirements including 252.204-7012 for safeguarding covered defense information and 252.204-7018 banning acquisition of certain Chinese telecommunications equipment. All offerors are subject to clauses on

General Info

Two TV monitors at $2.00 each, delivery by Jan 17, 2027, FOB origin, Navy traceability, zero defect sampling, CMMC Level 2, mercury prohibited.

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A7-26-T-600U Request for Quotations

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA

Full Description

Show more
MONITOR,TELEVISION
MONITOR,TELEVISION
.
.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RT001: MEASURING AND TEST EQUIPMENT
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH &
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFICIED ON ASSOCIATED DRAWING. IF A CONFLICT
SPE4A7-26-T-600U
SECTION B
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 80020 519531 REVISION NR B DTD 05/09/1985 PART PIECE NUMBER: 519531-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017572024 0001 EA 2.000
NSN/MATERIAL:5820012053103
DELIVERY (IN DAYS):0163
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE4A7-26-T-600U
SECTION B
PR: 7017572024 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:01/17/2027 Original Required Delivery Date:06/12/2027
SPE4A7-26-T-600U NSN/Part Number: 5820-01-205-3103 Quantity: 2 EA Purchase Request: 7017572024QTY: 2 Delivery: 163 days ADO

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
HEAD, FLUID FILTER
Solicitation # SPE4A7-26-T-805Q
Solicitation SPE4A7-26-T-805Q is a fixed-price request for quotations issued by DLA Aviation for the procurement of 37 fluid filter heads under NSN 1650007564991. The government specifically requires part number AC1768-61D1 or AC176861D1; part numbers with an S prefix, such as SAC1768-61D1, are excluded unless the regular part number is also clearly marked on both the item and its packaging. Delivery is specified as FOB Origin with a required delivery date of September 30, 2027, and a need ship date of March 17, 2027. Inspection and acceptance will occur at the destination, specifically DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including standards for source approval, configuration change management, and measuring equipment. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA master requirements taking precedence. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. All quotes must be submitted via the DIBBS portal, and the award process may be automated. Additionally, the procurement is subject to NAICS 336413 size standards, Buy American Act restrictions, and requires the use of the Wide Area Workflow system for electronic invoicing and payment.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHOULDER
Solicitation # SPE4A7-26-T-724X
Solicitation SPE4A7-26-T-724X is a federal procurement issued by the Defense Logistics Agency (DLA) for the supply of four shoulder bolts, identified by NSN 5306-01-454-8637. The requirement is managed by the ASC Supplier Oper AE and AF Division, with Naron Sanderlin serving as the primary point of contact. Delivery is scheduled for March 8, 2027, with a final required delivery date of November 29, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is issued under the First Destination Transportation (FDT) program, and offers must be submitted as FOB Origin. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific prohibitions are in place against the use of mercury or mercury-containing compounds in preservation and packaging. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and cybersecurity standards for safeguarding covered defense information. Offerors must be registered in the System for Award Management (SAM) and submit quotes through the DIBBS portal.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS