42--MOP-UP KIT,LATERAL LIN

MOP-UP KIT, LATERAL LINE, 3 PERSON: RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
NFES 0772
Part number: 3-MANMOPUPKIT
This item is procured in accordance with a United States Department of Agriculture, Forest Service specification. These Specifications are located at: https://www.fs.usda.gov/t-d/programs/fire/specs.htm
Unit of Issue KT (Kit) Shall be in accordance with this IPD. Each kit shall contain the following items:
Item #,,Qty.,, Name,, NSN 1,, 7,, Garden Hose, Woven Synth,,4210-01-167-1061 Material is on Ability One procurement list. 2,, 3,, Tee, Hoseline, w/ Cap,, 4210-01-080-1460 3,, 3,, Reducer, 1" to 3/4",, 4210-01-079-9286 4,, 1,, Reducer, 1-1/2" to 1",, 4210-00-975-2969 5,, 6,, Valve, Shut-Off, Ball, 3/4",,4210-01-412-5684 6,, 3,,Nozzle, Fire Hose, Mop-Up,,4730-00-595-1103 7,, 3,,Tip, Applicator,, 4210-01-412-5683 8,, 1,,Wye, 3/4-3/4-3/4",, 4210-01-412-6335 9,, 1,,Wrench, Spanner, Fire Hose,,5120-00-596-1426 10,, 4,,Gasket, Hose 1-1/2",,5330-00-239-1873 11,, 4,,Gasket, Hose 1",,5330-00-720-2621 12,, 8,,Gasket, Garden Hose 3/4",,5310-00-599-0776 13,, 3,,Applicator, Water,,4210-01-412-5688 14,, 3,,Goggles, Safety,,4240-01-504-7863 15,, 1,,Packsack,,8465-00-205-3493 16,, 1,,Instruction Sheet "DLA will provide the kit ,,,,,, instruction sheet during solicitation" 17,, 1,,Box, Fiberboard-Size 7 1/4 X 9 1/4 X 26 NFES0385
Each hose (item #1) shall be tightly rolled with the male threads to the center and secured with non-metallic strapping, a rubber band, or a tightly tied cord.
Three (3) "Lateral Packets" and one (1) "Accessory Packet" shall be assembled as follows:
SPE8E5-27-Q-0043
SECTION B
SUPPLY/SERVICE: 4210-01-321-4206 CONT'D
Each of the three Lateral Packet shall contain: 1 Tee, Hoseline (item #2); 1 Reducer, 1" to 3/4" (item #3); 2 Valve, Shut-Off, Ball 3/4", (item #5); 1 Nozzle, Garden Hose (item #6); 1 Tip, Applicator (item #7); and These items shall be packaged in a reclosable plastic bag for each packet, sealed, and labeled "Lateral Packet".
The Accessory Packet shall contain the following: 1 Reducer, 1-1/2" to 1" (item #4); 1 Wye, 3/4-3/4-3/4" (item #8); 1 Wrench, Spanner, Fire Hose (item #9); 4 Gaskets, Hose, 1-1/2" (item #10); 4 Gaskets, Hose, 1" (item #11); 8 Gaskets, Hose, 3/4" (item #12); These items shall be packaged in a reclosable plastic bag, sealed, and labeled "Accessory Packet".
Labeling of the three Lateral Packets and the Accessory Packet shall be done using direct printing on the bag, an adhesive sticker on the bag, or inserting a label on the inside of the bag in such a manner that it can be easily read from outside the bag. The lettering shall be 1/4" tall minimum.
The two pieces of each applicator (item #13) shall be taped together at each end. Three sets of taped applicators shall be bound together with a rubber band at each end.
Each pair of goggles (item #14) shall be packaged in a paperboard or fiberboard box (the box from the manufacturer is acceptable).
Each box (item #17) shall be properly assembled using staples, gluing is not permitted.
The bundle of applicators, the 7 hoses, the 3 Lateral Packets, and the Accessory Packet shall be suitably arranged in the box. The three pairs of goggles (item #14) shall be placed on top of these items. The packsack (item #15) and the instruction sheet (item #16) shall be placed on the top and the box closed. Secure the box closed with a minimum of 2 wraps of plastic strapping. The packing shall be in compliance with the Uniform Freight Classification and the National Motor Freight Classification.
The following kit components are to be supplied by the packaging contractor: A. 4 reclosable clear plastic bags for each kit. The bags shall be of sufficient size to enclose the contents of the three lateral packets and the accessory packet without strain. We recommend a minimum 10" x 10" size clear plastic bag. B. Labels, or labeling, for each packet. C. Rubber bands to hold the applicator wands bundled together. D. Tape to tape the wand halves together. E. Plastic strapping to secure the box closed.
PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
MARKING: Shipments to civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.
SPECIAL MARKING NSN/Part Number: 4210-01-321-4206 Quantity: 20 KT Purchase Request: 7018588252QTY: 20 Delivery: 60 days ADO