Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOULAGE SET, WAR WOUNDS

Active
SPE2DH-26-T-5595Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to a comprehensive moulage set designed for realistic combat wound simulation training, featuring a medium-sized kit with anatomically correct, three-dimensional, wearable simulation wounds in a natural skin tone. The kit includes a full array of trauma modules such as a lacerated scalp hood with hair, a multi-junctional bleed trainer, a sucking chest wound with exit wound, full-thickness arm and leg burns, brachial and radial/ulna fracture sleeves, partial right-hand and left-foot amputation prosthetics, a femoral wound shorts unit, a tib/fib fracture lower leg sleeve, and a makeup kit for additional realism. All components are water-resistant, durable, and comfortable for extended use on human models or manikins, allowing for realistic medical interventions during training scenarios. The set is delivered as a single kit in a protective case, with the unit of issue defined as a kit, and carries the NSN 6910-01-693-3677. The contract is issued under solicitation SPE2DH-26-T-5595 with a response deadline of August 4, 2026, and requires delivery within five days of award to Fort Bragg, North Carolina. Technical and quality requirements are governed by the DLA Master List, with compliance mandatory for procurement. The point of contact is Tina Vu of the Department of Defense’s Medical Supply Chain FSH, reachable via email and phone provided.

General Info

Moulage set with realistic combat wounds for training, delivered to Fort Bragg by August 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

5234 EAGLE TALON DR BLDG X3063, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5595.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOULAGE SET,WAR WOUNDS
MOULAGE KIT, WAR WOUNDS WEARABLE SIMULATION WOUNDS, MOULAGE KIT; MEDIUM
SKIN TONE; THREE-DIMENSIONAL; REALISTIC TACTILE/ VISUAL FEEDBACK FOR A
MULTITUDE OF TRAINING ENVIRONMENTS; ACCEPTS REAL MEDICAL INTERVENTION;
VERSATILE PATIENT CONFIGURATIONS; FORM-FITTED TO BE ANATOMICALLY
CORRECT; CAN BE USED ON HUMAN MODEL OR MANIKIN; DURABLE; COMFORTABLE;
WATER-RESISTANT; KIT INCLUDES 1EA IN A PROTECTIVE CASE: WS-LSH1-MS
LACERATED SCALP HOOD WITH HAIR, WS-MJBT-MS MULTI-JUNCTIONAL BLEED
TRAINER, WS-SCW-MS SUCKING CHEST WOUND + EXIT BACK SHORT SLEEVE SHIRT,
WS-BA-MS FULL THICKNESS ARM BURNS LONG SLEEVE SHIRT, WS-ASB-MS
BRACHIAL SLEEVE, WS-RUF-MS RADIAL/ULNA OPEN FRACTURE ARM SLEEVE,
HRMK-RP32-MS PARTIAL RIGHT-HAND AMPUTATION GLOVE, WS-FSB-MS FEMORAL
WOUND SHORTS, WS-LLF-MS TIB/FIB CLOSED FRACTURE LOWER LEG SLEEVE,
WS-BLL-MS FULL THICKNESS LEG BURNS LOWER LEG SLEEVE, HRMK-RP31-MS
PARTIAL LEFT FOOT AMPUTATION SLEEVE, AND MAKE-UP KIT. .. UNIT OF ISSUE:
KIT (KT) ..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 6910-01-693-3677 Quantity: 1 KT Purchase Request: 7017647248QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AIThe contract pertains to the procurement of a structural panel designated as PANEL, STRUCTURAL, AI, with NSN 1560-01-026-3876 and part number 50-7990-29S, under solicitation SPE4A5-26-T-312C. Three units are required to be delivered within five days of order placement, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. The product is classified as a critical application item and must adhere to stringent quality provisions including ISO 9001:2015, CMMC Level 2 self-assessment, and MIL-STD-1916 sampling methodology with zero non-conformances unless otherwise specified. Packaging must follow MIL-STD-129 and RP001 DLA packaging guidelines, with non-hazardous items conforming to commercial packaging standards unless overridden by higher-priority DLA requirements. Item Unique Identification is not required per customer request. Shipping must be conducted via traceable freight methods, not parcel post, to the designated delivery address at Tinker AFB, Oklahoma. The contract mandates strict documentation for source approval, cybersecurity compliance, and material marking, including removal of government identifiers from non-accepted supplies. The unit of issue is each (EA), with a total price of $3.00 per unit. All technical and quality requirements referenced via R or I numbers are incorporated by full text from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition scale. The delivery window is set for July 22, 2026, and the point of contact is Jackayla Pendergast at the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, FILLET FAIRINThe contract pertains to the procurement of one unit of a PANEL, FILLET FAIRING with NSN/Part Number 1560-00-846-6057, issued under solicitation SPE4A7-26-T-598Z by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 150 days of award, with a response deadline of August 5, 2026, and performance to occur at Robins Air Force Base, Georgia. The requirement incorporates mandatory technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific procurement packaging guidelines. Contractors must implement formal configuration change management procedures, including engineering change proposals and requests for variance, and are subject to inspection and acceptance at origin. All non-accepted items must have government identification removed prior to disposal or return. Physical identification of the bare item must include an object text ID identifier as specified. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and formal authorization from DLA. Any disclosure of technical data to foreign nationals, including U.S. subsidiaries or employees abroad, is strictly regulated under DFARS 252.225-7048.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
TUBE, TORQUE, ACTUATIThe contract pertains to the procurement of two torque tubes for flap actuation with NSN 1680-00-438-9161, under solicitation SPE4A6-26-Q-1205, with a delivery requirement of 252 days after award. The item is subject to strict export control due to the presence of technical data regulated under either ITAR or EAR, prohibiting any unauthorized disclosure or transfer to foreign persons, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export-controlled data training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire are permitted to access this data. Additional requirements include CMMC Level 2 certification for third-party assessors and adherence to physical identification and bare item marking standards. The contract is managed by the Department of Defense’s ASC Commodities Division, with Bryan Distin as the primary point of contact, and responses must be submitted by August 10, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
FLOOR, AIRCRAFTThe contract pertains to the procurement of one aircraft floor component identified by NSN 1560-01-626-9883, with a required delivery within 20 days after order. The solicitation, numbered SPE4A6-26-T-10CR, was posted on July 28, 2026, with responses due by August 5, 2026, under a federal procurement mechanism managed by the ASC Commodities Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issuance or award date depending on acquisition size, and any amendments override prior revisions. Packaging must adhere to DLA standards, and tailored quality requirements apply to both manufacturers and non-manufacturers, including configuration change management, engineering change proposals, and variance requests. The item must be physically marked per government specifications, and government identification must be removed from non-accepted supplies. Measuring and test equipment used in production must meet designated standards, and covered defense information protocols are enforced. The place of performance is Patuxent River, Maryland, and all contractual obligations must be fulfilled in compliance with NAICS code 336413. Primary point of contact is Robin Braden, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
COVER, AIRCRAFT GROUThe contract pertains to the procurement of 29 units of a cover designed for aircraft ground servicing, identified by NSN 1730-00-784-1836, under solicitation SPE8EF-26-T-1522. Delivery is required within 561 days after award, and the place of performance is Tinker Air Force Base with a zip code of 73145-8000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce. Only contractors with approved US/Canada Joint Certification Program status, completion of DLA export control training, and authorization from DLA may access this data. Compliance with DFARS 252.225-7048 is mandatory, and additional requirements include adherence to DLA packaging standards, configuration change management procedures, variance requests, and the removal of government identification from non-accepted supplies. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the primary point of contact is Russell Keiser.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
PLUG, INBOARD FLAP DThe contract involves the procurement of 32 units of a plug inboard flap drive component with part number 6-48703-6 and NSN 1560-00-340-4129, to be delivered within 43 days of an as-directed order to Tinker AFB, Oklahoma, with inspection and acceptance occurring at the origin. The item is governed by technical and quality requirements from the DLA Master List, including specific packaging and marking standards such as RP001 for DLA packaging, MIL-STD-129 for labeling, and ASTM D3951 for commercial packaging, with hazardous materials requiring compliance with FED-STD-313 and the Hazard Communication Standard. The component is subject to export control under ITAR or EAR, restricting disclosures to foreign persons and requiring contractors to be JCP-certified, have completed DLA export control training, and comply with DFARS 252.225-7048. The item does not require Unique Item Identification, per DFARS 252.211-7003(c)(1)(i), but must be physically marked under RQ017. Cybersecurity requirements mandate CMMC Level 2 certification for the C3PAO, and the contractor must implement safeguarding measures per DFARS 252.204-7012 and NIST SP 800-171, with incident reporting obligations. The contract includes numerous FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous materials, subcontracting, inspection, default, payment processing via WAWF, electronic submission, whistleblower rights, and prohibitions on certain Chinese military companies and covered telecommunications equipment. Payment is due under WAWF using the Invoice and Receiving Report format, and the contractor must comply with all DLA packaging, palletization, and preservation standards without explicit preservation methods detailed. The solicitation requires electronic submission via DIBBS by July 28, 2026, with no pricing information provided in the contract documentation, leaving the total value undetermined. Offerors must provide UEI and CAGE codes, represent their size and socioeconomic status, and comply with all technical data handling, inspection at origin, and documentation obligations as outlined in DLA requirements and applicable federal regulations.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract calls for the delivery of five structural plates designated as AI, identified by NSN 1560-01-716-9242, under solicitation SPE4A5-26-T-311K, with a required delivery date 197 days after award and a need ship date of May 12, 2026. The items must be supplied FOB origin with zero tolerance for quantity variance and are subject to inspection and acceptance at the destination. Packaging must comply with DLA’s specific procurement requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must adhere to RP001, and the Unit of Issue is EA. Supplier compliance with technical and quality standards referenced in the DLA Master List is mandatory, including CMMC Level 2 self-assessment, ISO 9001:2015, and requirements related to measuring equipment and removal of government identification from non-accepted items. Item Unique Identification is not required per the service customer’s request. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. Delivery is to DLA Distribution at the New Cumberland Facility in Pennsylvania, with transport instructions governed by DLAD procedural notes. The contract is under the NAICS code 336413, managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Johquin Wiley as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, INDICATORThe contract pertains to the procurement of one unit of a PANEL, INDICATOR with NSN 1680-01-315-4324 under solicitation SPE4A7-26-T-599H, with a delivery requirement of 20 days after order. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. The contractor must comply with stringent documentation and certification protocols including a Source Approval Request, Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and adherence to DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and any configuration changes must be submitted via an Engineering Change Proposal or variance request. Inspection and acceptance must occur at the supplier’s origin, and non-accepted supplies must have all government identification removed. The item contains controlled technical data subject to ITAR or EAR, prohibiting export without prior authorization from the Department of State or Commerce, and access is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling export-controlled data, and formal DLA approval. The point of contact for the contract is Amber Wells of the Department of Defense, with responses due by August 5, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FORMER, AIRCRAFTThe contract solicitation SPE4A7-26-T-583D seeks 14 units of a former aircraft identified by part number 35-8226-507, with delivery required to Tinker AFB, Oklahoma, within 109 days after delivery order issuance. The item is subject to stringent technical and quality controls governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards including ASTM D3951 and FED-STD-313. Packaging must comply with DLA Packaging Requirements (RP001) and MIL-STD-129 for marking and labeling, while hazardous materials must adhere to FED-STD-313 and 29 CFR 1910.1200. Inspection and acceptance occur at the origin, with the Government retaining authority to evaluate compliance prior to shipment. The item is controlled under export regulations—either ITAR or EAR—and may not be disclosed or exported without prior authorization; access to technical data is restricted to contractors with approved US/Canada Joint Certification Program status and completed DLA export control training. CMMC Level 2 certification is mandatory, and the contractor must comply with DFARS 252.204-7012 for safeguarding covered defense information and reporting cyber incidents. All personnel must be verified under employment eligibility requirements, and adherence to anti-trafficking, sustainable products, and hazardous materials handling standards is enforced. The contract prohibits the use of covered defense telecommunications equipment from certain Chinese entities and mandates removal of government identification from rejected supplies. Payment must be submitted electronically via WAWF, and the item does not require Unique Item Identification. The solicitation response deadline is July 31, 2026, with no pricing details provided in the document, indicating that offers will be evaluated on technical compliance and certification status. The contracting office is the ASC Supplier Oper AE and AF Division, with point of contact Sara Duran Campos. No formal evaluation factors, attachment list, or Statement of Work description is included, suggesting reliance on referenced regulatory frameworks and DLA directives for performance expectations.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
HOSE ASSY, FUEL, AIRCThe contract pertains to the procurement of two fuel hose assemblies for aircraft, identified by NSN 1680-01-550-9290, with a delivery requirement of 157 days after order. The solicitation number is SPE4A7-26-T-598S, issued by the Defense Logistics Agency under the Department of Defense, with performance to occur at New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and apply in full. The item is subject to stringent cybersecurity compliance, mandating CMMC Level 2 certification with a certified third-party assessment organization. All suppliers must comply with documentation requirements for source approval, inspection and acceptance at origin, and must remove government identification from non-accepted supplies. Export control regulations under ITAR or EAR apply to associated technical data, with distribution restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received DLA approval. Item Unique Identification is not required per the service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Packaging must adhere to DLA standards, and cybersecurity protections apply to all covered defense information. The solicitation opened on July 28, 2026, with responses due by August 5, 2026, and is classified under NAICS code 336413 for aircraft engine and engine parts manufacturing. Primary point of contact is Sabrina Keyser, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HARNESS SET, AIRCRAFOfferors submitting quotations for solicitation SPE7L4-26-T-5853 must comply with strict regulations regarding domestic sourcing, telecommunications equipment, and manufacturing methods. The Berry Amendment and Buy American Act apply with a reduced threshold of $150,000, requiring full disclosure of any non-domestic materials used in the product. Offerors are prohibited from supplying covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must affirmatively represent compliance with these restrictions. Additive manufacturing is not permitted unless specifically approved in advance, and any offer containing AM-produced items will be deemed non-responsive. Due to fluctuating demand, offerors are strongly encouraged to quote using quantity ranges instead of fixed numbers to allow flexibility in award execution without additional administrative steps, though this does not apply to Auto IDC. All offers must be submitted through DIBBS, and those unable to quote by the closing date must submit a “No Bid” with an anticipated quote date or reason to avoid assumptions of non-responsiveness. Small business joint ventures must include required representations for eligibility categories including small business, service-disabled veteran-owned, WOSB, EDWOSB, and HUBZone. Contractors must register through DLA’s new AMPS system within two months to maintain access to the Vendor Shipment Module, and those using VSM WebServices must update their internal schema by the specified deadline or lose shipping capability. The contract is for a Harness Set, Aircraft, NSN 1680-01-729-8887, with a requirement of 23 units and a 365-day delivery window. Fast Pay is not applicable, and all inquiries should be directed to the designated point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
LOCK, AUXILIARYThe solicitation SPE7L1-26-T-886Y is for the procurement of 103 units of the LOCK, AUXILIARY, identified by NSN 1095-00-138-7124, with a delivery timeline of 429 days from award. The contract is governed by Production Lot Testing requirements that mandate the contractor to submit two randomly selected samples from the production lot for government quality validation after First Article approval, unless otherwise specified in the Technical Data Package. The contractor must provide at least 14 days’ written notice to the contracting officer and Quality Assurance Representative prior to shipment of these samples. All samples must be shipped traceably to the designated DLA facility in Columbus, Ohio, clearly marked as “Production lot samples – do not post to stock” and include the contract and lot number. The shipment must contain interior documentation such as signed DD Form 1222 and DD250/IRAPT Receiving Reports, material certifications, process operation sheets, manufacturing drawings with proprietary markings, test reports with actual results, and a prepaid return label for the samples. The contractor is responsible for covering costs of samples consumed during testing and must submit copies of all shipping and testing documentation to the contracting officer at time of shipment. Fast Pay is not applicable, and the Government’s testing window is 90 days plus an additional 45 days. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense through the Land Supply Chain organization.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 339114
New
DIBBS
CALCIUM HYDROXIDE PASTCalcium Hydroxide Paste Dental is a radiopaque, antibacterial endodontic dressing with a high pH level of 12.5, supplied in 1.2 mL syringes as part of the Ultracal XS Kit. Each kit contains four 1.2 mL syringes and twenty assorted 29GA Navitip tips, with five of each length, designed for precise delivery during root canal treatments. The material is corrosive and must be stored at room temperature. The item has a non-extendable shelf life of 24 months and is classified as a Type I (Code M) item under DLA specifications. Packaging must comply with SPE2DH-26-T-5584 standards and applicable hazardous materials regulations including 49 CFR and ICAO guidelines. A current Material Safety Data Sheet (MSDS) is required and must accompany each shipment, submitted electronically to DLA.MSDS@DLA.MIL with the required cover sheet. The NSN is 6520-01-686-3975, with a purchase quantity of six kits, a delivery requirement of five days after delivery order, and a solicitation issued under contract number SPE2DH-26-T-5584 with a response deadline of August 4, 2026. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, with performance and contact details centered in Suffolk, VA.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICALThe surgical drape is a nonwoven fabric item measuring 75 inches in length and 57 inches in width, individually packaged, fan-folded, and colored blue, designed for use in sterile surgical environments. It is supplied in units of issue as a package containing twenty drapes each, and must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements. The item is regulated by the FDA, and buyers are required to submit a referral in EBS with full manufacturer and bidder details for verification. Shelf life is strictly defined at 36 months with no extendability, and the item is classified as a TYPE I (CODE Q) item under RS001. The manufacturer is Cardinal Health 200, LLC, with part number 9349, and the NSN is 6530-01-173-2311. Delivery must be made within five days to the destination specified as JBER, Alaska, under FOB destination terms, with no tolerance for quantity variance. Inspection and acceptance occur at the point of delivery, and packaging must conform to MIL-STD-2073-1E. The solicitation number is SPE2DH-26-T-5593, issued by the Department of Defense through the Medical Supply Chain FSH, with a response deadline of August 4, 2026, and Tina Vu listed as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TRAINING AID, CHEST SEAThis training aid is designed for use with the HYFIN chest seal system, providing realistic practice for applying both vented and occlusive chest seals on human skin and training manikins. It replicates the exact template of the HYFIN vent chest seal but features a less aggressive adhesive to ensure reliable adhesion during training without compromising surface reuse or skin safety. The product enables proper training of wound preparation and seal placement, including the accurate positioning of the vent over a simulated injury. Each seal comes individually packaged with a gauze pad for cleaning the application site prior to use, and the product is latex free to accommodate users with sensitivities. The unit of issue is a package containing two seals, and the item is identified by NSN 6910-01-690-8679 with a purchase request quantity of 30 seals across five packages. The solicitation is issued under contract number SPE2DH-26-T-5565 by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 4, 2026, and a required delivery within five days of award. Bidders must specify the source and part number of the product being offered. Compliance with DLA technical and quality requirements, packaging standards, and procedures for removing government identification from non-accepted supplies is mandatory. The product will be delivered to Monroe, Louisiana, and inquiries should be directed to Tina Vu at the provided contact information. The NAICS code 339113 identifies the classification as medical equipment manufacturing, and the acquisition is governed by DLA’s master list of technical and quality requirements effective on the solicitation issue date.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 453998
New
DIBBS
MANIKIN, RESCUE, SPECThe contract specifies the procurement of two rescue manikins, each standing five feet five inches tall and weighing 105 pounds, constructed with a cast vinyl body and a five-sixteenth inch steel frame, featuring articulated joints and anatomically distributed weight to simulate human movement and balance for training purposes. The unit of issue is each, and the items must comply with stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced via RQ and RP identifiers, ensuring adherence to federal procurement standards. The manikins are issued under NSN 6910-01-362-2996, with delivery required within 20 days of award, and the purchase is tied to request number 7017305237. The solicitation, issued under SPE2DH-26-T-5602, was posted on July 28, 2026, with responses due by August 4, 2026, and falls under the NAICS code 453998. The contracting activity is managed by the Department of Defense’s Medical Supply Chain FSH, with performance taking place at FPO, ZIP 96657-2615, and primary point of contact being Joseph Rucci via email and phone provided. All non-accepted supplies must have government identification removed in accordance with RQ011, and the applicable version of the DLA Master List is controlled by the solicitation issue date.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
GOWN, HOSPITAL PATIENTThe contract specifies the procurement of 10 hospital patient gowns in size large, designed as unisex garments made from cotton/polyester fabric with an overlap back and back ties, featuring butterfly sleeves and engineered for intravenous use. Each gown is sold as a single unit, and bidders must clearly indicate the source and part number being supplied to ensure compliance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Government identification must be removed from any supplies that are not accepted. The item is identified by NSN 6532-01-434-3880 under purchase request 7017631850, with a delivery requirement of 20 days after order. The solicitation number is SPE2DH-26-T-5559, posted on July 28, 2026, with responses due by August 4, 2026. The contracting activity is managed by the Department of Defense under the Medical Supply Chain FSH, with performance occurring at Fort Bliss, Texas, and primary point of contact being Tina Vu via email and phone provided.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
TEST TUBE, BLOOD COLLECThe contract specifies the procurement of 2 packages of glass blood collecting test tubes, each package containing 100 units, for use exclusively with the QBC STAR centrifugal hematology analyzer. Each unit must have a shelf life of nine months, and no more than two months may have elapsed from the date of manufacture to the date of delivery to the government. Labels on the product must include the NSN 6640-01-587-9896, manufacturer and CAGE code, date of manufacture, expiration or retest date, and the contract number with lot number. The items are not regulated by the FDA. Packaging must comply with Commercial packaging standards and Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a container that prevents damage and breakage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Norfolk, Virginia. Bidders must clearly state the source and part number being supplied. The solicitation incorporates technical and quality requirements from the DLA Master List, and applicable provisions include packaging, removal of government identification from non-accepted supplies, and potential coverage under defense information regulations. Delivery is required within 20 days of award under solicitation SPE2DH-26-T-5377, with responses due by July 28, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339113
New
DIBBS
CYLINDER, UNGRADUATED, LThe contract specifies the procurement of three ungraduated laboratory cylinders, each with a capacity of 600 milliliters, constructed from borosilicate glass, featuring an outer diameter of 51 millimeters and an internal height of 360 millimeters. The item is identified by NSN 6640-01-459-4425 and is to be delivered within 20 days of award under purchase request 7017665906. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation number is SPE2DH-26-T-5598, issued on July 28, 2026, with responses due by August 4, 2026. The contracting activity falls under the Department of Defense’s Medical Supply Chain FSH, with performance to be delivered to FPO, ZIP 96632. Tina Vu of DLA serves as the primary point of contact, reachable via email and phone listed in the documentation. The NAICS code 339113 confirms the classification for laboratory glassware manufacturing.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
AMALGAM ALLOY, CAPSULE,ZENITH PREMIUM DISPERSED PHASE AMALGAM ALLOY, CAPSULE, DENTAL is a high-strength, condensable dental alloy designed for long-lasting restorations with superior handling characteristics, available in regular and fast-setting formulations, supplied in units of 50 capsules per batch. The item is identified by NSN 6520-01-730-6230 and is procured under solicitation SPE2DH-26-T-5583 with a required delivery within five days of award. It carries a non-extendable shelf life of 120 months, in compliance with RS030 requirements, and is subject to DLA’s packaging and hazardous material standards as outlined in RD003, RP001, and RQ034. A current Material Safety Data Sheet (MSDS) must accompany each shipment and be electronically submitted via DLA.MSDS@DLA.MIL with the required cover sheet P-75 containing logistics data. Packaging must conform to 49 CFR and ICAO regulations for hazardous materials. The item is categorized under NAICS 339114 and is procured by the Department of Defense’s Medical Supply Chain FSH through the DLA, with Tina Vu as the primary point of contact. Removal of government identification from non-accepted supplies is required per RQ011, and the technical and quality specifications referenced are governed by the DLA Master List effective on the solicitation or award date.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTICThis contract pertains to the procurement of POINT ENDODONTIC GUTTA PERCHA POINTS, specifically model 120S, which are color-coded, assorted in sizes 45 to 80, and measure 30 millimeters in length, supplied in boxes of 120 units each. The item is identified by NSN 6520-01-643-3521 and is being requested in a single box quantity under purchase request 7017649745, with a delivery requirement of 20 days ADO. The solicitation, issued under number SPE2DH-26-T-5606, was posted on July 28, 2026, with proposals due by August 4, 2026, and falls under NAICS code 456199 for other health care services. The contracting authority is the Department of Defense, through the Medical Supply Chain FSH, with delivery to APO 09094-3219. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Covered defense information may apply, and bidders must specify the source and part number being offered. Government identification must be removed from non-accepted supplies, and bids must be submitted with full product details to meet procurement compliance.
All Other Health and Personal Care Retailers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
BUR, DENTAL SURGERYThe contract is for the procurement of diamond burs used in dental surgery, specifically the BrioPrep Coarse Modified Flat-End Taper model identified by part number BRIO6845KR.31.025, supplied in sterile packages of 25 units per package. The item is identified by NSN 6520-01-717-0597 and requires delivery within five days of order placement. The burs feature a 19mm standard shank and a head size of 0.25mm, meeting technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA procurement standards, and suppliers must ensure removal of government identification from non-accepted items. The solicitation is issued under contract number SPE2DH-26-T-5591 with a response deadline of August 4, 2026, and the place of performance is listed as Suffolk, VA, 23435-5000. The contracting agency is the Department of Defense through the Medical Supply Chain FSH, and inquiries should be directed to Tina Vu at the provided contact information. Bidders must clearly specify the source and part number being offered and acknowledge that covered defense information may apply to this procurement.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
INDICATOR, STERILIZAThe product is a steam biological indicator designed for rapid and reliable monitoring of sterilization processes at 270°F and 275°F using gravity-displacement steam sterilizers. It features a self-contained design with a super rapid readout capability of just 50 seconds when used with the 3M Attest Auto-Reader 490, making it suitable for both qualification testing and routine monitoring. Storage should be maintained under normal room conditions between 49°F and 86°F, and it must not be stored near sterilants or other chemicals to ensure integrity. Each unit of issue is a box containing fifty indicators. The item is identified by NSN 6530-01-654-3553, with a purchase request for three boxes and a delivery requirement within five days of award. The solicitation is issued under contract number SPE2DH-26-T-5574, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA. Bidders must specify the source and part number supplied, and the acquisition is subject to applicable technical, quality, and packaging requirements as defined in the DLA Master List of Technical and Quality Requirements. The contract includes provisions for removal of government identification from non-accepted supplies and applies covered defense information protocols. The place of performance is in Suffolk, Virginia, with Tina Vu listed as the primary point of contact.
Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
SHEET, LIFT-DRAWThe contract is for the procurement of disposable lift-draw sheets, specifically white synthetic spunlace material measuring 80 inches by 40 inches, designed for safe patient transfer from hospital beds to gurneys or stretchers. These sheets must be highly absorbent yet not waterproof and capable of supporting up to 1300 pounds, with a unit of issue consisting of 50 sheets per package. Three packages are required under purchase request 7017631831, and delivery must be completed within 20 days after award. The NSN and part number are 6530-01-503-8750, and bidders must clearly state the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5551, was posted on July 28, 2026, with responses due by August 4, 2026, and is governed by DLA packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The place of performance is Fort Bliss, Texas, 79918-2527, with point of contact Tina Vu at DLA. The contract falls under NAICS code 423450 and is issued by the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details