This Solicitation opportunity from Department Of Defense was posted on May 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

MOUNT, RESILIENT, WEA

Closed

SPE4A7-26-T-394BFederal

Submission Closed05/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332994

New

DIBBS

RESTRAINT KIT, HEADThe contract involves the procurement of 12 units of a Restraint Kit, Head, identified by the National Stock Number 6530-01-619-1777. The solicitation, numbered SPE2DH-26-T-4581, was issued by the Defense Logistics Agency under the Department of Defense and posted on June 15, 2026. Interested parties were required to respond by June 22, 2026. The purchase request for this contract is 7017171617. This is a federal-level solicitation without specified set-aside categories or NAICS codes, suggesting open competition. The contract's place of performance and point of contact details were not specified. The procurement is managed through the Defense Logistics Agency, indicating its role in supplying critical logistics support to defense operations.

Defense Logistics Agency

POSTED

DEADLINE

ADAPTER, GOVERNOR VAThe contract pertains to the procurement of a single unit of an Adapter, Governor VA, identified by NSN/Part Number 3040-01-195-6125. The solicitation number for this procurement is SPE7L3-26-T-068F, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline set for June 26, 2026. This is a federal government solicitation, though no specific set-aside designation, NAICS code, or location details for the office or performance site are specified. The contract request references purchase request number 7017155388 and involves the acquisition of one unit of the specified adapter. Additional details such as points of contact and precise locations for performance or office are not provided. The procurement is accessible through the Defense Logistics Agency's online portal, facilitating vendor responses within the stipulated timeframe. Overall, this contract outlines a straightforward acquisition for a specific defense-related equipment component under a federal solicitation process.

Defense Logistics Agency

POSTED

DEADLINE

STRAP, INVOLUNTARY, RThe contract pertains to the procurement of three units of an involuntary strap, identified by the National Stock Number 8465-01-470-6253. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, carries the reference number SPE1C1-26-T-1433 and was posted on June 15, 2026. Interested parties were required to respond by June 26, 2026. This is a federal solicitation, and while there is no specified set-aside or NAICS code provided, it is targeted towards federal organizational procurement. The contract involves the Defense Logistics Agency, which manages the acquisition process, although specific details such as the exact place of performance or contact points were not disclosed. The solicitation and related documents are accessible through the Defense Logistics Agency’s online portal for registered vendors. This contract is focused on a specialized military supply item, emphasizing procurement efficiency and compliance within the federal defense acquisition framework.

Defense Logistics Agency

POSTED

DEADLINE

Electro-Hydraulic Valve Assembly IntegrationThe contract involves the final assembly and integration of electro-hydraulic components, specifically solenoids, sensors, and hydraulic elements, into a fully functional modulator valve sub-assembly. This subcontract focuses on combining these technical parts to produce a key component essential for the operation of modulator valves. The work falls under the NAICS code 332994, indicating a specialized manufacturing process related to small arms or ordnance manufacturing, which aligns with precision assembly requirements. Issued by Dallas Area Rapid Transit in Texas, the solicitation was posted on June 15, 2026, with responses due by June 18, 2026. While certain details such as the place of performance, organization type, and point of contact are unspecified, the contract’s nature suggests a highly technical and precise assembly task contributing to advanced electro-hydraulic systems. Interested subcontractors can access more information through the provided online portal.

Dallas Area Rapid Transit

POSTED

DEADLINE

10--GUN SYSTEM HARNESSThis contract involves the procurement of 51 units of a gun system harness, identified by NSN 1005016974068, intended for delivery to the DLA Distribution location W1A8 within a specified timeframe of 129 days after award. The solicitation number for this request for quotes (RFQ) is SPE7L426T5107, posted by the DLA Land and Maritime, a Department of Defense office based in Columbus, Ohio. The acquisition is categorized under NAICS code 332994, indicating it relates to fabricated structural metal manufacturing. The approved source for this item is specified as 44114 EC0R-0155. Quotes must be submitted electronically by the deadline of June 26, 2026, and the solicitation documents are only available online, with no hard copies or detailed specifications, plans, or drawings provided. The solicitation is open to all responsible sources, which means any qualified vendor can submit a timely quote for consideration. Additional inquiries about the solicitation can be addressed via the primary contact email provided, and the solicitation can be accessed through the given link on the government contracting platform.

DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

The contract involves the procurement of 42 units of the Mount, Resilient Weapon System, identified by NSN 5342-01-369-0894, with a total delivery timeframe of 170 days and a required delivery date by January 3, 2027. The item is classified as a commercial item with detailed documentation and quality requirements referenced from the Defense Logistics Agency's master technical and quality requirements list. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 standards, with a specified shelf life of 96 months and compliance to configuration change management and quality assurance provisions. Inspection and acceptance are to occur at the destination, and the shipping address is the DLA Distribution center at New Cumberland, Pennsylvania. This contract includes strict compliance with sampling plans as per MIL-STD-1916 or equivalent, emphasizing zero tolerance for non-conformance unless otherwise stated. Special handling and preservation methods are indicated, with packaging tailored to the referenced drawings to ensure protection and proper identification. The contract also requires removal of government markings on non-accepted supplies and adherence to identification protocols. The contracting agency is the Department of Defense, specifically the ASC Supplier Operations for the Air and Army Force Division, and the primary point of contact is Christian Roberson.

General Info

Procurement of 42 resilient weapon mounts, delivered by January 3, 2027, with strict quality and packaging compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-394B Request for Quotations DLA Aviation May 21 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 20

Solicitation

Response DeadlineMay 28

Deadline has passed

Submission Closed

05/28/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressUS

Contacts

Christian Roberson

contact@example.gov

+1 (555) 000-0000

Full Description

MOUNT,RESILIENT,WEA
MOUNT, RESILIENT, WEAPON SYSTEM
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MIL-STD-129P, TYPE 1 SHELF LIFE-96 MONTHS
RS026: Shelf-life requirement RS001 for a TYPE I (CODE U) item with a
SPE4A7-26-T-394B
SECTION B
shelf life of 96 months (non-extendable) applies to this item.
CRITICAL APPLICATION ITEM
IAW BASIC DRAWING NR 19207 12417625 REVISION NR C DTD 11/01/2017 PART PIECE NUMBER: 12417625
IAW REFERENCE DRAWING NR 19207 12417625 REVISION NR C DTD 01/01/2039 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12417625 REVISION NR DTD 12/09/2024 PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 19207 12417625 REVISION NR A DTD 12/10/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016844555 0001 EA 42.000
NSN/MATERIAL:5342013690894
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:32 -32 Type I, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING SHALL BE IAW DWG 12417625 AND SPI# AK13690894 REV A DTD 12/10/2024.
PARCEL POST ADDRESS:
W25G1U
SPE4A7-26-T-394B
SECTION B
PR: 7016844555 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/15/2026 Original Required Delivery Date:01/03/2027
SPE4A7-26-T-394B NSN/Part Number: 5342-01-369-0894 Quantity: 42 EA Purchase Request: 7016844555QTY: 42 Delivery: 170 days ADO