Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOUNT, RESILIENT, WEA

Active
SPE4A7-26-T-600EFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a resilient weapon mount, identified by part number 26001578-101 and NSN 5342017278571, with a total quantity of ten units to be delivered under solicitation SPE4A7-26-T-600E. Delivery is required within 114 days from the contract award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with stringent quality standards including MIL-STD-1916 or ASQ H1331 for sampling, with critical attributes held to a zero-defect acceptance criterion unless otherwise stipulated. The product must adhere to DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required. Packaging must conform to MIL-STD-2073-1E, using prescribed methods for protection, wrapping, and containment, and palletization must meet DLA guidelines. The item is classified as a critical application component under The Boeing Company’s specifications and is subject to cybersecurity compliance under CMMC Level 2 self-assessment, along with documentation mandates for source approval and removal of government identification from non-accepted items. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with shipping details governed by DLAD procedural notes C19 and C20. The contract was posted on July 29, 2026, with responses due by August 6, 2026, and the original required delivery date is set for May 5, 2027, while the needed ship date is November 29, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List, and the procurement falls under NAICS code 332510, managed by the Department of Defense’s ASC Supplier Operations division.

General Info

Ten resilient weapon mounts, part 26001578-101, due Nov 29, 2026, to New Cumberland, PA, zero defect, CMMC Level 2, MIL-STD compliant.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
RICHARD ELLERY
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOUNT,RESILIENT,WEA
MOUNT, RESILIENT, WEAPON
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 82918 P/N 26001578-101
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
SPE4A7-26-T-600E
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017010660 0001 EA 10.000
NSN/MATERIAL:5342017278571
DELIVERY (IN DAYS):0114
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:JA CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE4A7-26-T-600E
SECTION B
PR: 7017010660 PRLI: 0001 CONT’D
Need Ship Date:11/29/2026 Original Required Delivery Date:05/05/2027
SPE4A7-26-T-600E NSN/Part Number: 5342-01-727-8571 Quantity: 10 EA Purchase Request: 7017010660QTY: 10 Delivery: 114 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
COLLAR, SHAFT
Solicitation # SPE7L1-26-T-890J
The contract pertains to the procurement of one collar, shaft with NSN 5340-01-714-8889 under solicitation SPE7L1-26-T-890J, with a required delivery within 20 days after order. Full and open competition applies, and the item is classified under NAICS code 332510. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The product must not contain any Class I ozone-depleting chemicals, and any proposed substitutes must be submitted for approval unless explicitly authorized by the specification. The contractor must comply with DLA packaging standards and remove government identification from non-accepted supplies. Cybersecurity compliance mandates either a self-assessment or certification by a CMMC Level 2 accredited third-party assessor. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved JCP certification, completed DLA training on export-controlled data, and formal approval may access such data. Any configuration changes necessitate a formal engineering change proposal. The point of contact is Christine Davis at the Department of Defense, Land Supply Chain, with responses due by August 10, 2026, and performance location in Mechanicsburg, PA, 17050-2411.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-888P
The contract involves the procurement of 34 CLAMP, LOOP items under solicitation SPE7L1-26-T-888P, with a response deadline of August 10, 2026, and a required delivery within 20 days of award. The item is identified by NSN 5340-01-327-5961 and must comply with MIL-STD-130N, dated November 16, 2012, for proper identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA eProcurement website, with the controlling revision depending on whether the acquisition is simplified or large-scale, based on the solicitation or award date. The supplier, J and M Products Inc., located in Burbank and Hawthorne, California, must ensure all non-accepted supplies have government identification removed in accordance with RQ011. The contract is managed by the Department of Defense’s Land Supply Chain, with the place of performance listed as APO 96368-5136, and primary point of contact is Kristina Derry, reachable via email and phone. The NAICS code is 332510, indicating classification under Fabricated Metal Product Manufacturing.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BAND, RETAINING
Solicitation # SPE7L1-26-T-890M
The contract pertains to the procurement of 300 retaining bands with NSN 5340-01-070-4996 under solicitation SPE7L1-26-T-890M, a total small business set-aside with a NAICS code of 332510, administered by the Department of Defense through the Land Supply Chain office. Delivery is due within 266 days after award, and performance is required at Robins AFB, Georgia. The contractor must prepare a Production Lot Test Report, clearly labeled with the contract and lot numbers, and present it to the Quality Assurance Representative for review. All shipments of these reports must include signed DD Form 1222 and DD Form 250/iRAPT receiving documents, a copy of the contract, all applicable test reports with actual results and tolerances, material and process certifications, process operations and inspection method sheets, and manufacturing drawings marked to limit public disclosure and restrict government use as necessary. The solicitation was posted July 29, 2026, with responses due by August 10, 2026, and primary point of contact is Isabelle Szulewski at DLA.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLT
Solicitation # SPE7L1-26-T-890A
This contract pertains to the procurement of 22 units of a retainer, nut, and bolt assembly identified by NSN 5340-01-684-8348 under solicitation SPE7L1-26-T-890A. Delivery is required within 73 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. Strict packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129 must be followed, with no special marking codes applied. The item must be packed in compliance with DLA’s packaging guidelines, using a Unit of Issue of EA, with zero tolerance for quantity variance. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional incorporation of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, or specialized instrument components as defined by NAVSEA. Mercury-containing portable devices must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with documentation, reporting, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The contract is bound by federal acquisition rules, and all communications and logistics must conform to DLA procedures, including transportation directives C19 and C20. The point of contact for inquiries is Brandon Pesicek, and the required delivery date is November 20, 2025, with a need ship date of November 4, 2025.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, COTTER
Solicitation # SPE4A6-26-T-10FE
The contract solicits 1,227 cotter pins with NSN 5315-00-185-0037 under solicitation number SPE4A6-26-T-10FE, with a response deadline of August 6, 2026, and a delivery requirement of 113 days after award. The item is procured as fully competitive under a military specification and is subject to the DLA Master List of Technical and Quality Requirements, which governs all referenced technical and quality standards identified by R or I numbers. Critical item source inspection is mandatory, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with zero non-conformances required unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively; unspecified attributes default to major. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, and NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shock-proof and include a secondary containment boundary meeting NAVSEA 5100-003D. The place of performance is Robins Air Force Base, Georgia, and the contracting office is the ASC Commodities Division under the Department of Defense, with Paul Askew as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, WIRE ROPE,
Solicitation # SPE4A5-26-T-312X
This contract is for the procurement of four wire rope couplings, identified by NSN 4030-01-654-3836 and part numbers 234-517-9242 and NM135055-0450, supplied by Honeywell International Inc. and Eaton Aeroquip LLC under solicitation SPE4A5-26-T-312X. The item is designated as a critical application component requiring strict compliance with Federal Aviation Administration airworthiness standards, FAA bare item marking requirements, and DLA packaging and preservation regulations per MIL-STD-2073-1E and MIL-STD-129. Supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required in sampling unless otherwise specified, and critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is FOB origin with inspection and acceptance occurring at the destination, with a required delivery date of July 17, 2026, and a 101-day lead time. Packaging must adhere to DLA packaging requirements, palletization standards, and special marking codes, with no special markings required. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with no quantity variance permitted.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-10GC
The contract pertains to the procurement of PIN-RIVET items with the NSN 5320-00-971-9153, requiring a total quantity of 178 units to be delivered within 42 days of contract award. All items must comply with stringent sampling requirements mandating adherence to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated, and critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Packaging must conform to ASTM D3951 unless overridden by DLA Master List requirements, with all packaging and labeling strictly following MIL-STD-129, including palletization per RP001. Items must be marked with government identification as specified, and any non-accepted supplies must have government identifiers removed. The delivery is FOB origin, inspection and acceptance occur at destination, with no variance allowed in quantity. The specified shipping address is the DLA Distribution San Joaquin facility in Tracy, CA, and transportation follows DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-10GC with a required delivery date of April 25, 2026, and unit price of $178.00 per EA for a total contract value of $31,684. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or amendment dates.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-890C
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, and must disclose any non-domestic materials in their quotations. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be submitted unless prior approval is granted. Quotations must include quantity ranges due to fluctuating demand, as manual evaluation allows for flexible requirement aggregation or reduction without resolicitation, though this does not apply to Auto IDC. Small business joint ventures must submit specific certifications under FAR provisions for eligibility categories. All vendors must register through the upcoming AMPS system to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema by specified deadlines. Offerors anticipating submission after the closing date must file a “No Bid” on DIBBS with an anticipated quote date or reason to avoid unnecessary follow-ups. Fast Pay is not applicable to this solicitation. The item in question is a spring tension clip with NSN 5340-01-192-2048, quantity 15 units, requiring delivery within 57 days to Tinker AFB, with Robert Warne as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-10GR
The contract solicitation SPE4A6-26-T-10GR requires four straight headless pins with NSN 5315-01-400-3809 for delivery within 128 days to Tracy, CA, under the Department of Defense’s Defense Logistics Agency. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The items must comply with stringent packaging, marking, and identification standards including the removal of government identification from non-accepted supplies and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes are assigned verification levels or AQLs based on classification, with unspecified attributes treated as major. Configuration changes require formal engineering change proposals or variance requests, and manufacturers must submit source approval documentation per RC001. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and DLA authorization may access the technical data. Cybersecurity requirements mandate CMMC Level 2 compliance through either a self-assessment or third-party assessment by a certified C3PAO, and covered defense information handling is mandatory. All documentation, inspection, and acceptance activities must occur at the manufacturer’s facility per RQ009, and the procurement falls under NAICS 332510 for metal stamping and forging. Primary point of contact is Christopher Montgomery of the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAIN
Solicitation # SPE7L1-26-T-890T
The contract is for the procurement of 4,728 solid plain disks with NSN 5340-01-229-3826 under solicitation SPE7L1-26-T-890T, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 182 days after contract award, with responses due by August 10, 2026. The item falls under NAICS code 332510 and is subject to DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The supply must comply with strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Additionally, the technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with valid US/Canada Joint Certification Program certification, completed DOD export training, approved DLA questionnaire responses, and formal DLA authorization. The place of performance is New Cumberland, Pennsylvania, with Brandon Pesicek as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LEVER, MANUAL CONTRO
Solicitation # SPE7L1-26-T-888R
This contract pertains to the procurement of one manual control lever, identified by NSN 5340-01-082-4079 and part number 142D5220, under solicitation SPE7L1-26-T-888R. The item must be delivered within 20 days to the destination specified as APO AP 96264-2025, with FOB destination terms, zero tolerance for quantity variance, and final inspection and acceptance occurring at the delivery point. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using approved materials and procedures, and no special marking is required. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and requires prior approval for any substitute chemicals. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to Covered Defense Information provisions and must adhere to DLA packaging and transportation guidelines, including references to DLAD Proc Notes C19 and C20 for shipping logistics. The supply is designated for the Department of Defense through the Land Supply Chain, with delivery directed to Kunsan Air Base in South Korea for receipt, and the contracting officer is Kristina Derry. The unit of issue is each (EA), with a total price based on a unit price of one dollar. The procurement falls under NAICS code 332510 and is classified as a federal solicitation with no set-aside designation. The response deadline is August 10, 2026, and the original required delivery date is July 27, 2026. Government-specific identifiers and distribution codes are provided for internal tracking, and all submissions must conform to the DoD unit of issue standards as outlined in the official DLA reference. The contract mandates strict adherence to technical compliance, environmental restrictions, and logistics protocols throughout the fulfillment process.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, QUICK RELEA
Solicitation # SPE7L1-26-T-889F
The contract solicitation pertains to the procurement of 28 units of a PLUNGER, QUICK RELEA with NSN 5340-00-565-3198 under solicitation number SPE7L1-26-T-889F. The item is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export or disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by the Defense Logistics Agency. The delivery timeline is set for 20 days after award, and the solicitation, issued by the Department of Defense’s Land Supply Chain under NAICS code 332510, has a response deadline of August 10, 2026. Only vendors meeting all specified compliance and certification criteria may submit proposals, with point of contact Kristina Derry available for inquiries via provided email and phone.
LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
PARTS KIT, SEAL REPL
Solicitation # SPE4A7-26-T-599Y
The contract pertains to a parts kit for mechanical seal replacement, identified by the part number 110-004-19-0150 and NSN 1560-01-524-3353, with a single unit requirement. It is issued under solicitation SPE4A7-26-T-599Y by the Department of Defense through the ASC Supplier Oper AE and AF Division and is targeted for delivery to the Taiwan Army at Zuoying Ammunition Sub in Kaohsiung City. The delivery deadline is 20 days after award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at origin, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking and palletization standards under DLA packaging requirements. The item is designated as a critical application, with qualified suppliers including Atlantic India Rubber Co Inc, Kirkhill Inc, Rubbercraft Corporation of California, and Bell Textron Inc. Quality and procurement requirements are governed by tailored higher-level contract quality standards applicable to both manufacturers and non-manufacturers, incorporating technical and quality criteria from the DLA Master List. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes are classified with specific verification levels or AQLs. Configuration changes require a formal engineering change proposal or variance request, and government identification must be removed from non-accepted supplies. Hazardous materials packaging must adhere to IP025 guidelines. The contract includes a required delivery date of July 31, 2026, and specifies a single unit at unit price of $1.00. Transportation is subject to DLA procedures, and the solicitation is open for response until August 6, 2026, with the primary point of contact being Jack Bolan at DLA.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
THERMOSTAT, FLOW CONTRO
Solicitation # SPE4A7-26-T-599X
The contract specifies the procurement of a Thermostat, Flow Control with NSN 6685-01-368-0419 and part numbers 247-7133 and 2ET322, quantity of 366 units, to be delivered FOB origin within 171 days, with a required ship date of January 25, 2027, and original delivery date of January 18, 2027. The item is designated as a critical application and must comply with strict packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking codes applied. Packaging and palletization follow DLA’s procurement guidelines, and the unit is delivered to the DLA Distribution facility in New Cumberland, PA. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling rules defined by MIL-STD-1916 or ASQ H1331, and unspecified attributes treated as major. Configuration change management and deviation requests are governed under RQ002, while documentation for source approval must meet RC001 standards. Measurement equipment, technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or award date depending on acquisition size. The contract is a total small business set-aside under NAICS code 334519, issued as a solicitation on July 29, 2026, with responses due August 6, 2026. Unit of issue is each (EA), with no quantity variance allowed, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i).
Other Measuring and Controlling Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
SPLICE, CONDUCTOR
Solicitation # SPE4A7-26-T-599S
This contract issued by the Defense Logistics Agency under solicitation SPE4A7-26-T-599S specifies the procurement of 25 units of conductor splice components, identified by NSN 5940-00-961-0479, from approved vendors including Ideal Industries Inc, Grove U.S. LLC, and United Equipment Accessories Inc, each with their respective CAGE codes and part numbers. All supplies must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede any other standards including ASTM D3951 for packaging. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Physical marking and identification of items must follow RQ017 requirements, ensuring clear labeling per contract specifications. Delivery is required within five days of contract award, FOB origin, with zero variance allowed in quantity. Items must be packaged in accordance with MIL-STD-129 and DLA Packaging Requirements, palletized per RP001, and labeled with the specified Unit of Issue and Quantity per Unit Pack. Shipment must be sent via the fastest traceable method excluding parcel post to the Sierra Army Depot in Herlong, California, with identical freight and mark-for addresses. The required delivery date is July 24, 2026, and all items must be marked with designated government identifiers including the TCN and DIC codes. Inspection and acceptance occur at the destination, and only DLA authorized units of issue apply. The contract is managed under NAICS code 335931, with primary contact Jesse Saul at DLA, and is exclusively for federal government use.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SELECTOR SET, HYDRAU
Solicitation # SPE4A7-26-T-600K
The contract pertains to the procurement of a Hydraulic Selector Set with part number HP891501T, supplied by TACTAIR FLUID CONTROLS INC, CAGE 70236, identified by NSN 1630-00-939-8534. The item is classified as a Commercial Off the Shelf (COTS) product and is designated as a Critical Application Item requiring Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Delivery is mandated within 39 days of contract award, with FOB Origin terms and mandatory delivery to DLA Distribution Cherry Point in North Carolina. The required quantity is seven units, with no variance allowed in shipment quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must adhere to DLA packaging guidelines. Documentation requirements include compliance with DLA’s Master List of Technical and Quality Requirements, and the removal of government identification from non-accepted supplies. The solicitation number is SPE4A7-26-T-600K, issued with a response deadline of August 6, 2026, and the original required delivery date is January 28, 2027, though the need-by date is set for September 15, 2026. Unit price is $7.00 per unit, totaling $49.00, with procurement governed by Defense Federal Acquisition Regulation Supplement (DFARS) provisions and DoD unit of issue standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, QUICK DISCONN
Solicitation # SPE4A7-26-T-599U
The contract is for a single unit of a terminal, quick disconnect, identified by NSN 5940-01-602-4565 and part number 12077412-L, under solicitation SPE4A7-26-T-599U. Delivery is required within five days of award, with FOB origin terms, and no variance in quantity is permitted. The item must be packaged in accordance with ASTM D3951, but must fully comply with all DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must meet DLA’s RP001 packaging standards. Sampling for quality assurance is governed by MIL-STD-1916 or ASQ H1331 Table 1, employing zero-defect acceptance criteria unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination. The destination for delivery and marking is DLA LMP Zone 1, Building 552 North, 7th Street Avenue, Texarkana, TX 75507-5000, with shipping required via the fastest traceable means—parcel post is prohibited. The government use identifier, project code, and point of contact details are included for administrative tracking, and the required delivery date is July 24, 2026. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, and the unit of issue is the individual unit (EA). The buyer is APTIV SERVICES 3 (US), LLC, and the purchasing request number is 7017622935. All documentation must align with DLA procedures, and the supplier must ensure correct marking, packaging, and compliance with federal procurement standards.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PARTS KIT, FASTENER
Solicitation # SPE4A7-26-Q-0923
The contract pertains to a Parts Kit, Fastener with NSN 1560-01-699-3342, for a quantity of 20 units under solicitation SPE4A7-26-Q-0923, with a delivery deadline of 250 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date controlling based on acquisition size. The item is subject to cybersecurity compliance under CMMC Level 2, with the contractor required to be a certified third-party assessment organization. Physical identification and bare item marking standards are mandated, though unique item identification is not required per the service customer’s directive and DFARS 252.211-7003(c)(1)(i). Packaging must comply with DLA procurement standards, and inspection and acceptance occur at origin. Government identification must be removed from any non-accepted supplies. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S. subsidiaries and foreign nationals. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The Defense Logistics Agency limits distribution to ensure compliance with DFARS 252.225-7048. The contract was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Latrice Brown as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333995
New
DIBBS
ACCUMULATOR, HYDRAUL
Solicitation # SPE4A7-26-Q-0917
The contract pertains to the procurement of four hydraulic accumulators with NSN 1650-01-558-4800 under solicitation SPE4A7-26-Q-0917, with a response deadline of August 10, 2026, and a delivery requirement of 200 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export control under ITAR or EAR, meaning any disclosure of technical data to foreign persons, including foreign nationals within the United States, requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to such controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on handling export-controlled technical data and received formal approval from the DLA controlling authority. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The contracting activity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen as the primary point of contact.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PANEL ASSEMBLY, ELEV
Solicitation # SPE4A7-26-Q-0883
The contract specifies the procurement of three PANEL ASSEMBLY, ELEV units under solicitation SPE4A7-26-Q-0883, with a delivery timeline of 210 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. The contract incorporates multiple DLA-specific requirements including packaging standards, tailored quality controls, configuration change management, inspection at origin, removal of government identification from non-accepted items, and export control of technical data subject to ITAR or EAR regulations. Disclosure of controlled technical data to foreign persons, regardless of location or citizenship, is strictly prohibited without prior authorization, and only contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal approval may access such data. The item is identified by NSN 1560-00-766-6241, and contract administration is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed designated as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A7-26-T-599V
This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, identified by NSN 5970-00-612-8492 and sold in units of 1 RO equaling 108 feet. The item is classified as a commercial item and must be manufactured in compliance with qualified products list QPL-19166-30 revision 30. Strict packaging requirements under MIL-STD-2073-1E and MIL-STD-129 apply, including special marking code 33 for Type II shelf life identification. The tape has a maximum shelf life of five years when stored between 50°F and 80°F with humidity below 75%, but compliance with RS001 mandates a non-extendable 12-month shelf life from manufacture, regardless of storage conditions. The material is designated as hazardous with HMIC code P, necessitating submission of a complete Safety Data Sheet package including warning labels and the required transmittal form to dscrchempol@dla.mil. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted in the sample unless otherwise stated, and verification levels for attributes are prescribed. All deliveries must be shipped via traceable freight means, not parcel post, to specified military addresses in Virginia Beach, Oak Harbor, and Norfolk. The contract includes four separate CLINs totaling six ROs with delivery due between June and July 2026, all subject to origin inspection and acceptance with no quantity variance allowed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332312
New
DIBBS
MOUNT, RESILIENT, WEAPON
Solicitation # SPE4A7-26-T-599Z
This contract is for the procurement of 97 units of a resilient weapon system mount, identified by NSN 5342-01-159-6456 and part number 12293273-6, under solicitation SPE4A7-26-T-599Z. The item is classified as a critical application and Type I shelf-life item with a non-extendable shelf life of 60 months, requiring at least 85% of its shelf life to remain upon receipt by the first government activity. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including proper labeling per MIL-STD-129 with special marking code 32 for Type I shelf life. The product must be palletized and shipped FOB origin, with inspection and acceptance occurring at the point of manufacture. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must be verified at level VII with an AQL of 0.1. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. Delivery is due within 171 days of award, with an original required delivery date of April 21, 2027, and the item must be shipped to DDSP New Cumberland Facility in Pennsylvania. The unit price is $97.00 per each, totaling $9,409.00, and procurement is governed under NAICS code 332312 by the Department of Defense’s ASC Supplier Oper AE and AF Division.
Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
LATCH, VALVE
Solicitation # SPE4A7-26-T-600D
This contract specifies the procurement of a LATCH, VALVE with NSN 5342-01-193-7756 and part number S4127, for a quantity of 13 units, delivered FOB origin within 149 days of contract award, with no variance allowed in quantity. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific preservation methods, packaging materials, and unit container types. Mercury or mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, or weapons systems, and even then, portable devices must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or a comparable zero-defect sampling plan, with verification levels and AQLs assigned to critical, major, and minor attributes; unspecified attributes are treated as major. Acceptance occurs at the destination under inspection at the receiving warehouse, and non-conforming items must have government identification removed prior to return. The item must be palletized as directed by DLA packaging requirements, and shipping is directed to the DLA Distribution San Joaquin facility in Tracy, CA. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation issue date, and all compliance obligations are binding under the terms of SPE4A7-26-T-600D.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HEAD, PISTON
Solicitation # SPE4A7-26-T-599W
The contract is for one head, piston, part number 41001708 with NSN 1650-01-046-2267, to be supplied by PTI Technologies Inc, CAGE 05228, under solicitation SPE4A7-26-T-599W, with a delivery requirement of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, CMMC Level 2 self-assessment, and tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical marking of the bare item is required, and measuring and test equipment must meet specified standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and if applicable drawings or specifications define critical, major, or minor attributes, they must correspond to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria, which remains zero defects. The supplier must submit a source approval request with full documentation as required. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, and inquiries should be directed to Lawrence Rucker at the provided contact information.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details