Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOUNTING BASE, ELECT

Active
SPE4A7-26-T-597VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a mounting base, electrical, with NSN 5975-01-724-6344, under solicitation SPE4A7-26-T-597V, requiring delivery to the USS FT LAUDERDALE (LPD 28) at FPO AE 09595 within 20 days. Ten individual line items, each for one unit at a unit price of $1.00, total ten units with zero variance allowed in quantity. All deliveries are FOB destination, with inspection and acceptance occurring at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, which override ASTM D3951; non-hazardous items must be commercially packaged per ASTM D3951 while hazardous items require IP025 compliance. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001 guidelines. Sampling inspections must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are held to the strictest verification levels. Shipments must be sent via the fastest traceable means using VSM, with parcel post strictly prohibited. The material is to be delivered to a vessel shipment address with transportation procedures governed by DLAD PROC NOTES C19 and C20. The original required delivery date is July 22, 2026, and all technical, quality, and packaging requirements are governed by referenced DLA standards and must be met in full.

General Info

Procure ten $1.00 mounting bases for USS FT LAUDERDALE, deliver in 20 days per DLA and MIL-STD specs, FOB destination, zero variance, traceable shipping only.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

327110 - Pottery, Ceramics, and Plumbing Fixture ManufacturingView NAICS

Place of Performance

UNIT 100347 BOX 1, FPO, AE, 09595, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-597V.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOUNTING BASE,ELECT
MOUNTING BASE,ELECT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CONSILIUM MARINE US INC 3EGT0 P/N 90105200314-00A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017607478 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
SPE4A7-26-T-597V
SECTION B
PR: 7017607478 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE52
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A7-26-T-597V
SECTION B
PR: 7017607484 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017607484 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SPE4A7-26-T-597V
SECTION B
PR: 7017607484 PRLI: 0001 CONT’D
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE59
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0003 7017607472 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
SPE4A7-26-T-597V
SECTION B
PR: 7017607472 PRLI: 0001 CONT’D
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE45
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

SPE4A7-26-T-597V
SECTION B
PR: 7017607507 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0004 7017607507 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE4A7-26-T-597V
SECTION B
PR: 7017607507 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE86
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-597V
SECTION B
PR: 7017607496 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0005 7017607496 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE4A7-26-T-597V
SECTION B
PR: 7017607496 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE73
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-597V
SECTION B
PR: 7017607489 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0006 7017607489 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
SPE4A7-26-T-597V
SECTION B
PR: 7017607489 PRLI: 0001 CONT’D
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE65
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
SPE4A7-26-T-597V
SECTION B
PR: 7017607489 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0007 7017607502 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
SPE4A7-26-T-597V
SECTION B
PR: 7017607502 PRLI: 0001 CONT’D
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE4A7-26-T-597V
SECTION B
PR: 7017607502 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE80
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0008 7017607466 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE4A7-26-T-597V
SECTION B
PR: 7017607466 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be
SPE4A7-26-T-597V
SECTION B
PR: 7017607466 PRLI: 0001 CONT’D
as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
SPE4A7-26-T-597V
SECTION B
PR: 7017607466 PRLI: 0001 CONT’D
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE06
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0009 7017607518 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE4A7-26-T-597V
SECTION B
PR: 7017607518 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE4A7-26-T-597V
SECTION B
PR: 7017607518 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) V3278A6194CE98
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
SPE4A7-26-T-597V
SECTION B
PR: 7017607518 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0010 7017607512 0001 EA 1.000
NSN/MATERIAL:5975017246344
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
SPE4A7-26-T-597V
SECTION B
PR: 7017607512 PRLI: 0001 CONT’D
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001
SPE4A7-26-T-597V
SECTION B
PR: 7017607512 PRLI: 0001 CONT’D
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313, PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025. IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
UNIT 100347 BOX 1
FPO AE 09595
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
V3278A
USS FT LAUDERDALE (LPD 28)
DLA VENDORS: USE VSM FOR
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE4A7-26-T-597V
SECTION B
PR: 7017607512 PRLI: 0001 CONT’D
M/F: (TCN) V3278A6194CE91
RDD: 777
PROJ: LK5 TP 2
SUPP ADD: YNCSE5 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: SR
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026

SPE4A7-26-T-597V NSN/Part Number: 5975-01-724-6344 Quantity: 1 EA Purchase Request: 7017607518QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 327110
New
DIBBS
PUMPING UNIT, SEWAGEThe contract specifies the procurement of three sewage pumping units under NSN 4630-01-466-8289 with a purchase request number 7017636660 and a total quantity of three units, each to be delivered within five days of order placement with no tolerance for quantity variance. Delivery is FOB origin and acceptance occurs at the destination, with inspection also performed at the destination point. Packaging must comply with ASTM D3951 unless superseded by more stringent requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. The units must be shipped via the fastest traceable freight method, explicitly prohibiting parcel post, to the specified freight address at Naval Weapons Station Earle in Leonardo, New Jersey, with a parcel post address provided only for reference. The contract reference is SPE8E6-26-T-3890 and the required delivery date is July 27, 2026. Government-only fields identify shipping controls, distribution codes, and program identifiers, while the point of contact is Ryan Kirlin of the Defense Logistics Agency for inquiries. The units are sourced from approved suppliers Whitworths Nautical World Pty Ltd and RWB Marine Australia Pty Limited, with their respective part numbers listed.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 13 days
View Details
NAICS: 327110
New
DIBBS
CABINET SECTIONThe contract requires the delivery of ten individual units of cabinet components identified by NSN 5975-12-378-8293, each priced at $1.00, for a total value of $10.00, with a strict delivery requirement of 20 days from the contract award. All items must be shipped FOB destination to the USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with no quantity variance permitted. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E, including specific preservation methods, unit containers, and packaging codes. Marking is mandated to meet MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The shipment must be sent via fastest traceable means using VSM, explicitly prohibiting parcel post, and aligned with DLA procedural notes C19 and C20. Sampling and quality verification adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stipulated, and attributes are to be classified with corresponding verification levels or AQLs. Technical and quality compliance is governed by the DLA Master List of Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date. The contract is issued under SPE4A7-26-T-597Z, and the original delivery deadline is July 22, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 327110
New
DIBBS
ADAPTER, ELECTRICALThe contract is for the procurement of 15 electrical adapters under NSN 5975-01-584-5371, issued through a simplified acquisition by the Defense Logistics Agency (DLA) under solicitation SPE4A7-26-T-576E. The item must be delivered FOB destination to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with a delivery timeline of 162 days after award, targeting a need-ship date of January 3, 2027. All supplies must comply with strict technical and quality standards mandated by the DLA Master List of Technical and Quality Requirements, which override commercial packaging standards like ASTM D3951. Packaging must meet RP001 DLA Packaging Requirements for Procurement with palletization in accordance with specified guidelines, and all items must be labeled and marked per MIL-STD-129. If hazardous per FED-STD-313, packaging must follow TQ requirement IP025; non-hazardous items may use commercial packaging but still must adhere to DLA precedence. Inspection and acceptance occur at destination with zero non-conformances required, using MIL-STD-1916 or ASQ H1331 Table 1 sampling, and any specified critical, major, or minor attributes must meet verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Delivery quantity is fixed at exactly 15 units with no variance permitted. The contract mandates electronic invoicing through Wide Area WorkFlow (WAWF) and compliance with federal regulations including employment verification, combating human trafficking, sustainable product use, and hazardous material identification. The contractor must also validate its Unique Entity ID and CAGE code, and provide representations regarding small business status if applicable. The solicitation requires electronic submission through DIBBS by the deadline of July 29, 2026, with award anticipated to follow, and the contract includes numerous FAR and DFARS clauses covering equal opportunity, labor standards, cybersecurity, subcontracting, transportation, and payment, all subject to Deviation 2026-00038 and other referenced authorities.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in about 19 hours
View Details
NAICS: 327110
New
DIBBS
PLATE, WALL, ELECTRICThe contract specifies the procurement of three units of a wall plate electric component identified by NSN 5975-01-714-0946 and part number 5-4-4875, governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. All items must comply with stringent sampling protocols per MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Packaging must adhere strictly to DLA requirements under RP001 and MIL-STD-129, with hazardous materials following FED-STD-313 and TQ requirement IP025, while non-hazardous items must meet ASTM D3951 unless superseded by DLA standards. The item must be palletized, marked, and labeled per specified guidelines, with no variance allowed in quantity. Delivery is FOB origin within five days of contract award to Fort Carson, Colorado, with shipment required via traceable freight methods and prohibited from parcel post. The supplier ID is W80BTZ61950111, with mandatory delivery to the Fort Carson receiving point, and the required delivery date is July 17, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

6 days ago

DEADLINE

in 2 days
View Details
NAICS: 327110
DIBBS
Vacuum Toilet Bowl (Water Closet) SupplyThe contract involves the supply of 62 ceramic water closet bowls identified by NSN 4510-01-522-8299, intended for use within Department of Defense facilities. These items are classified as fragile and require specialized handling protocols throughout transportation and delivery to prevent damage. All units must comply with Defense Logistics Agency repackaging standards to ensure proper protection, labeling, and documentation during transit. The contract is structured as a subcontract under NAICS code 327110, which corresponds to clay building material manufacturing, indicating the supplier is responsible for meeting technical specifications for ceramic sanitation fixtures. The award is managed by the Defense Logistics Agency under the broader oversight of the Department of Defense, with performance obligations tied to strict adherence to military logistics requirements. The solicitation was posted on July 21, 2026, and the contract reference is linked through DIBBS under the award and delivery identifiers SPE8E824D0002 and SPE8E825F0460.
Defense Logistics Agency

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 327110
DIBBS
MOUNTING BASE, ELECTThe contract concerns the procurement of five mounting bases for electrical applications, identified by NSN 5975-01-686-6944, with a delivery requirement of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on the acquisition scale. Packaging must adhere to DLA standards, and any non-accepted supplies must have all government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons or entities without prior authorization from the Department of State or Commerce; access is limited to contractors with approved JCP certification, completed DOD export control training, and formal DLA approval. The solicitation number is SPE4A7-26-T-587R, with a response deadline of July 29, 2026, and the place of performance is Cherry Point, North Carolina, with Jamiah Sutton designated as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 327110
International
Supply of Sanitary Fixtures (Toilets, Sinks, Faucets)The contract involves the supply of ceramic sanitaryware items including toilets, sinks, basins, and faucets for installation in bathroom and kitchen settings, categorized under NAICS code 327110 for pottery and related products manufacturing. The agreement is structured as a subcontract under the Western Regional Health Authority, part of the Government of Jamaica, with the solicitation posted on July 21, 2026, indicating an upcoming procurement cycle. While no specific solicitation number or set-aside details are provided, the performance location and point of contact information remain undefined, suggesting that further administrative details may be available through the linked portal. The scope focuses exclusively on the delivery of fixtures without including installation services, implying the buyer will handle placement and integration into existing infrastructure.
Western Regional Health Authority

POSTED

7 days ago

DEADLINE

N/A
View Details
NAICS: 327110
DIBBS
Manufacture of Interior Glass Panel ComponentsThe contract involves the fabrication of interior glass panel components identified by NSN 1680016717942, requiring precise cutting, forming, tempering, and finishing processes to comply with aerospace or defense industry standards. The work must meet rigorous performance and quality requirements consistent with military specifications, ensuring the component's durability, safety, and reliability in high-stakes operational environments. The manufacturer is expected to adhere to strict quality control protocols throughout all stages of production, from raw material handling to final inspection. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 327110 indicating classification under glass product manufacturing. The contract was posted on July 17, 2026, and is associated with the award identification SPE4A526P1570. Although specific performance location details are not provided, the work is likely to be performed at facilities certified for defense-related manufacturing. All deliverables must be fully compliant with applicable defense specifications, and any deviation from the required standards could result in rejection or contractual penalties.
Defense Logistics Agency

POSTED

11 days ago

DEADLINE

N/A
View Details
NAICS: 327110
SLED
De-centralized Manufacturing of Low-Cost, Sustainable Cementitious BindersThe agreement aims to advance a decentralized manufacturing system for sustainable, low-carbon cementitious binders that can replace up to 90 percent of traditional Portland cement in ready-mix concrete production. This initiative leverages industrial waste and natural pozzolans combined with C-Crete’s proprietary binder to drastically reduce the carbon footprint of concrete manufacturing while maintaining structural performance. The pilot facility will be located in San Leandro, California, serving as a proof-of-concept for widespread adoption by cement and concrete suppliers across the state, with the goal of enabling a scalable, economically viable alternative to conventional cement. The project operates under the State of California Energy Commission, with primary oversight managed by Neeva Benipal as Commission Agreement Manager and Rouzbeh Savary from C-Crete serving as Project Manager. The initiative aligns with California’s environmental objectives and is exempt from CEQA review based on staff recommendations. The pilot will test the technical and operational feasibility of decentralized production, empowering local ready-mix operations to produce binder materials on-site or regionally, reducing transportation emissions and supply chain dependencies. The timeline is set for the project to be pursued starting July 7, 2026, and the effort is intended to catalyze broader industry transition toward low-emission construction materials.
Energy Commission

POSTED

22 days ago

DEADLINE

N/A
View Details
NAICS: 327110
SLED
Ceramic Nest Module Supply and InstallationThe contract entails the supply and installation of 75 new ceramic nest modules and the retrofitting of 45 existing seabird nests with elevated sunshields to enhance durability and climate resilience on Año Nuevo Island. These nesting structures are specifically designed to protect seabird populations from rising temperatures and environmental stressors by providing stable, long-lasting nesting habitats. The ceramic materials ensure resistance to erosion, salt exposure, and extreme weather conditions typical of the coastal environment. All work must be completed in accordance with ecological guidelines to minimize disruption to nesting species and their natural behaviors. The project is classified under NAICS code 327110, indicating it involves the manufacturing of ceramic products, and is structured as a subcontract under the California Department of Parks and Recreation. The performance location is designated with zip code 94060, corresponding to Año Nuevo Island, where all installations must occur. The solicitation was posted on July 6, 2026, and the effort is part of a broader initiative to conserve and restore critical seabird breeding habitats under the state’s conservation and climate adaptation mandates. All materials and installation methods must meet specified environmental and durability standards to ensure the long-term success of the nesting program.
California Parks and Recreation, Department of

POSTED

23 days ago

DEADLINE

N/A
View Details
NAICS: 327110
DIBBS
Marine Toilet Bowl (Vitreous China) Supply
Defense Logistics Agency

POSTED

27 days ago

DEADLINE

N/A
View Details
NAICS: 327110
DIBBS
Supply of Water Closet Bowls
Defense Logistics Agency

POSTED

27 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332119
New
DIBBS
SPACER, STRAIGHTThe contract specifies the procurement of five straight spacers identified by NSN 5365-01-670-7905 and part number 92510A810 from McMaster-Carr Supply Company, with a unit price of five dollars per item and a total contract value of twenty-five dollars. Delivery is required within twenty days to the destination FPO AE 09577 aboard the USS LABOON DDG 58, with FOB destination terms, zero quantity variance allowed, and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E, marking must adhere to MIL-STD-129 without special markings, and palletization must follow DLA packaging requirements. Sampling for quality assurance follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required unless otherwise stated. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. The shipment must be made using the fastest traceable means, prohibiting parcel post, and must reference DLA procedural notes for transportation logistics. The original delivery deadline is July 22, 2026, and all requirements are issued under solicitation SPE4A7-26-T-597T by the Department of Defense, with point of contact Channon Dillard at DLA.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
SEAL, INTERFACE AIRCThis contract pertains to the procurement of four units of a seal interface for a 25 mm gunport and mount, designated by NSN 1560-01-388-9484 and part number LE261-0122-0005, sourced from SEAL SCIENCE, INC. and RUBBERCRAFT CORPORATION OF CALIFORNIA. The item is classified as a critical application component and must comply with all applicable technical, quality, and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. Mandatory standards include MIL-STD-1916 or ASQ H1331 for sampling with zero non-conformances required unless otherwise specified, and verified attributes must adhere to specific verification levels or AQLs. Packaging must follow DLA requirements RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951, though DLA requirements override any conflicting commercial standards. The delivery is FOB origin with a firm fixed price and no variance allowed in quantity, and inspection and acceptance occur at the manufacturer’s facility. The item is not subject to Item Unique Identification as per customer request, though physical marking per RQ017 is required. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and documentation for source approval must be submitted per RC001. Delivery is due 330 days after award, with all shipments directed to DLA Distribution Warner Robbins, Georgia. The contract is issued under solicitation SPE4A7-26-Q-0894, with a response deadline in August 2026 and a required delivery date of September 25, 2027. The contract specifies detailed handling for packing and labeling and references transportation protocols per DLAD proc notes, with the DLA as the contracting authority and Shenita Tirado as the primary point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336419
New
DIBBS
COVER, ACCESS, AIRCRAThe contract pertains to the procurement of one access cover for aircraft, identified by NSN 1560-00-811-2903, under solicitation SPE4A7-26-Q-0899, with a response deadline of August 7, 2026, and a delivery requirement of 250 days after award. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The item involves technical data subject to U.S. export control regulations under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the United States, and binding U.S. companies and their foreign subsidiaries. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD training on handling export-controlled technical data, and approved completion of the DLA Export-Controlled Technical Data Questionnaire. The contracting activity is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen listed as the primary point of contact, and the performance location remains unspecified but is governed under U.S. federal procurement protocols.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332913
New
DIBBS
FITTING, ORIFICE, TIPThe item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333, and delivery must be completed within 44 days after order date. The solicitation, identified as SPE4A7-26-Q-0895, was posted on July 28, 2026, with a response deadline of August 4, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. The technical data associated with this item is subject to export control under either ITAR or EAR, and any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Commerce. This restriction applies to all entities, including U.S. companies and their foreign subsidiaries, as well as foreign national employees. Access to the controlled data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have successfully submitted and been approved for the DLA Export-Controlled Technical Data Questionnaire. The point of contact for inquiries is NYA Currie, reachable via email and phone provided.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
PLUG, MACHINE THREADThe contract pertains to the procurement of 432 units of a machine thread plug with NSN 5365-01-035-4899 under solicitation SPE4A7-26-Q-0906, with a delivery requirement of 160 days after award. Technical data associated with this item is subject to export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning any disclosure to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DLA training on handling export-controlled technical data, and have been formally authorized by DLA. The solicitation was posted on July 28, 2026, with responses due by August 7, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with Mykhara Robinson as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333995
New
DIBBS
PRODUCTION LOT TESTINGThe contract is for the procurement of 46 piston hydraulic accumulators with NSN 0001S00000062 under solicitation SPE4A7-26-Q-0901, with a delivery requirement of 134 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contractor must comply with stringent documentation standards including a Source Approval Request, DLA packaging specifications, and tailored higher-level quality requirements for both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and government identification must be removed from non-accepted items. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval from DLA may access this controlled data, as mandated by DFARS 252.225-7048. The contract is managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Destiny Stevenson as the primary point of contact, and responses are due by August 11, 2026.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332710
New
DIBBS
BRACKET, FEED TUBEThe item is a BRACKET, FEED TUBE with NSN 5342-01-128-1745, quantity of 32 units, under purchase request 7015852934, with a delivery requirement of 140 days after date of award. The solicitation number is SPE4A7-26-Q-0900, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 5, 2026, and a posting date of July 28, 2026. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, restricting its disclosure to foreign persons regardless of location and applying equally to foreign national employees and subsidiaries of U.S. companies. DFARS 252.225-7048 governs the handling of this controlled data. Contractors must hold an approved U.S./Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and submit the DLA Export-Controlled Technical Data Questionnaire to gain authorized access. Distribution is limited exclusively to DLA contractors who have received formal approval from the DLA controlling authority.
Machine Shops

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
DIVIDER, POWER, RADIO FRThe contract is for one unit of a radio frequency power divider, part number 823HN718-1, identified by NSN 5895016995693, to be delivered to the USS RONALD REAGAN CVN 76 at FPO AP 96616. Delivery is required within 20 days of contract award, with FOB destination terms, and no variance in quantity is permitted. Inspection and acceptance occur at the delivery point, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is classified as a critical application and must adhere to DLA’s packaging requirements, including prohibition of mercury or mercury compounds in preservation and packing. Sampling and quality verification follow MIL-STD-1916 or equivalently approved zero-based plans, with critical attributes assigned a verification level of VII or an AQL of 0.1. The unit of issue is each (EA), and the contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality standards identified by R or I numbers. The supplier must use the DLA Vendor Shipping Module for shipment tracking, and transportation instructions reference DLA procedural notes C19 and C20. The original required delivery date is July 24, 2026, with a procurement solicitation issued under SPE4A7-26-T-598A and a response deadline of August 5, 2026.
Other Communications Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
ADAPTER-CAP, CONSTANThe item specified is an ADAPTER-CAP, CONSTANT SPEED DRIVE with NSN 1650-00-286-2229, quantity of one unit, and a delivery deadline of 255 days after contract award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Department of Defense under office designation ASC SUPPLIER OPER AE AND AF DIV, with response submissions due by August 5, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Disclosure to foreign national employees or foreign subsidiaries is strictly controlled. Access to this data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export-controlled training and questionnaire, and have received explicit approval from the DLA controlling authority. The contract includes compliance requirements for CMMC Level 2 certification by the third-party assessment organization and physical identification marking of the bare item as specified in RQ005 and RQ017.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333612
New
DIBBS
HOUSING ASSEMBLY, GEARThe contract pertains to the procurement of four Housing Assembly, Gear units with NSN 2915-01-542-4682 under solicitation SPE4A7-26-R-X972, issued by the Department of Defense through the ASC Supplier Oper AE and AF Division. The item is classified as a Critical Application Item, and delivery is required within 240 days after award date with firm fixed pricing and no variance tolerance in quantity. Inspection and acceptance occur at the destination, with FOB origin terms applicable. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA Packaging Requirements for Procurement, including palletization standards, and all documentation must reflect the correct Unit of Issue and Quantity per Unit Pack as specified. The DLA Master List of Technical and Quality Requirements governs all technical specifications and override any conflicting standards, including labeling and marking requirements. The contract mandates strict compliance with cybersecurity standards requiring a CMMC Level 2 Self-Assessment and includes detailed quality assurance protocols, mandating sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, and zero non-conformances required for acceptance unless otherwise stipulated. The manufacturer may choose attribute or variable inspection methods under MIL-STD-1916, and MIL-STD-105/ASQ Z1.4 may be used for sample size determination only. All supplies must be free from government identification if not accepted, and measuring and test equipment must meet specified standards. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. The contractor must submit Source Approval Requests as outlined in RC001, and all packaging and shipment logistics must conform to DLAD Proc Notes C19 and C20 for transportation routing and first destination handling.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of 2 units of RIVET, BLIND with NSN 5320-01-006-2154 under solicitation SPE4A7-26-T-598E, issued on July 28, 2026, with responses due by August 5, 2026. The item is classified as a commercial item and conforms to a military or consensus non-government part standard, allowing hardware manufactured to any prior current revision of the standard to remain acceptable, though all future production must meet the latest revision. No shelf life applies, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated; attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must comply with DLA requirements including removal of government identification from non-accepted supplies and physical identification of bare items. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones. Delivery is required within 10 days after award to Clackamas, Oregon, and inquiries should be directed to Brad Ingram at the Defense Logistics Agency. The solicitation is fully competitive under a federal specification, and covered defense information may apply.
Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details