Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

MOUNTING BASE, ELECT

Active
SPE4A7-26-T-641YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of three electrical mounting bases, identified by NSN 5975-01-160-6275 and part number 2041442-0102. The items are designated as critical application items and are associated with suppliers including Honeywell International, Ontic Engineering and Manufacturing, and Super Tek Electronics. Delivery is required within 171 days, with a need ship date of February 7, 2027, and a final required delivery date of February 16, 2028. The goods are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment for cybersecurity and specific DLA packaging and marking requirements per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Inspection and acceptance will take place at the destination, and the contract incorporates various DLA master list technical requirements and covered defense information protocols.

General Info

Procurement of three electrical mounting bases for delivery to DLA Distribution San Joaquin.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-641Y.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
Erica Adams
contact@example.gov

Full Description

Show more
MOUNTING BASE,ELECT
MOUNTING BASE,ELECT
RT001: MEASURING AND TEST EQUIPMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPE4A7-26-T-641Y
SECTION B
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC DBA 27914 P/N 2041442-0102
ONTIC ENGINEERING & MANUFACTURING, INC 45934 P/N 2041442-0102
SUPER TEK ELECTRONICS INC 0F8X6 P/N 2041442-0102
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017838226 0001 EA 3.000
NSN/MATERIAL:5975011606275
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
SPE4A7-26-T-641Y
SECTION B
PR: 7017838226 PRLI: 0001 CONT’D
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/07/2027 Original Required Delivery Date:02/16/2028
SPE4A7-26-T-641Y NSN/Part Number: 5975-01-160-6275 Quantity: 3 EA Purchase Request: 7017838226QTY: 3 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-2955
The contract solicits quotes for the procurement of two units of a power supply identified by NSN 6130123743665, intended for delivery to the DLA Distribution center at location W1A8 within 126 days after the order date. The solicitation, issued by the Defense Logistics Agency Land and Maritime, operates under solicitation number SPE7L726T2955 and follows NAICS code 335999. Approved manufacturers or sources for the power supply units include specific part numbers from vendors labeled 8W891, C3494, D1901, and F0555. The solicitation process is conducted electronically through an RFQ posted on the DIBBS website, with no physical copies or additional specification documents provided. Interested and responsible vendors may submit electronic quotes that will be considered if received on time, with a submission deadline of May 4, 2026. The procurement does not specify any set-aside type, and the solicitation encourages all capable sources to participate. Questions regarding the solicitation should be directed to the designated buyer via email, with additional information accessible through the DIBBS solicitation portal. The contracting office is based in Columbus, Ohio, reflecting its organizational affiliation with the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A6-26-T-15HB
This contract is for the procurement of electrical insulation sleeving, specifically part number M23053/6-105-0 under NSN 5970-00-838-5951. The requirement is for 9 spools, with each spool consisting of 200 feet. This is designated as a critical application item and must be sourced from a Qualified Products List (QPL) provider. The item has a shelf life of 60 months and must adhere to technical standards including SAE AS23053/6 and MIL-STD-129R. Delivery is required within 98 days after the order, with FOB origin and inspection and acceptance occurring at the destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically utilizing Special Marking Code 33 for shelf-life items. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331, ensuring zero non-conformances in the sample lot for acceptance.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
CHARGER, BATTERY
Solicitation # SPE7L7-26-T-4698
This contract is for the procurement of two battery chargers under solicitation number SPE7L7-26-T-4698, identified by NSN 6130-01-523-8651. The items are designated as critical application items and are associated with part numbers from Marathonnorco Aerospace and Kratos Unmanned Aerial Systems. Delivery is required within 164 days, with a need ship date of February 2, 2027, and a final required delivery date of April 6, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129, as well as palletization requirements under RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Additional compliance requirements include the removal of government identification from non-accepted supplies and the protection of covered defense information.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M5-26-T-402A
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-402A, is for the procurement of one electrical solenoid, identified by NSN 5945-01-616-1896. The contract requires delivery within 20 days after the order is placed and falls under NAICS code 335999. Performance is designated for FPO, zip code 96660. The agreement incorporates specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, it mandates the removal of government identification from any non-accepted supplies. Alternate offerors must provide a complete data package for both approved and alternate parts to be considered.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
MOUNTING PAD, ELECTR
Solicitation # SPE7M0-26-T-037F
This contract is for the procurement of four electronic mounting pads, identified by NSN 5999012285480 and Bivar Inc part number 112-040. The order is managed under solicitation SPE7M0-26-T-037F for the Department of Defense, with a required delivery date of August 10, 2026, and a delivery timeline of five days after order. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to specific DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must follow ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. Shipments must be sent via the fastest traceable means to the AF Supply Control Receiving center at Robins AFB, Georgia, and the use of parcel post is strictly prohibited.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4521
The contract solicitation SPE7L7-26-T-4521 issued by the Defense Logistics Agency Distribution San Joaquin seeks the procurement of 31 POWER SUPPLY units with NSN 6130017217533 and part number VI-LU1-IY from VICOR CORP under a fixed-price contract. Delivery is required FOB DESTINATION to the specified warehouse in Tracy, California, no later than June 14, 2027, with a 307-day period after award for performance. The unit price is $677.22, resulting in a total contract value of $21,000.82, with zero variance allowed in quantity. All items must comply with stringent military packaging standards including MIL-STD-2073-1E, with preservation method 41 (cleaning and dry packing), unit container D3, intermediate container E5, and pack code U. Labeling and marking must adhere to MIL-STD-129 with no special marking required, and bare item marking must follow RQ017 when applicable. Palletization must conform to DLA Packaging Requirements for Procurement (RP001). Inspection and acceptance occur at the destination facility, with sampling to be conducted using MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; any use of MIL-STD-105/ASQ Z1.4 for lot sizing requires zero non-conformances for acceptance. Critical, major, and minor attributes must be inspected at verification levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The supply chain must comply with cybersecurity requirements under NIST SP 800-171, including submission of a DOD Assessment Report, and safeguarding of covered defense information as mandated by DFARS clauses 252.204-7012 and 52.240-93. Contractor systems handling federal contract information must be protected per these controls, and transport by sea must utilize U.S.-flag vessels unless waived. Hazardous materials, if any, require compliance with Hazard Communication Standard 29 CFR 1910.1200, including proper labeling and submission of Safety Data Sheets
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4519
The contract specifies the procurement of 29 power supply units under NSN 6130-01-677-9619, with a total value of $841.00, delivered FOB origin with a delivery period of 253 days from the order date, targeting arrival by April 21, 2027. Delivery is to be made to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E, using preservation method 41 (cleaning and drying), corrosion-inhibiting wrap material, and unit container type D3 with intermediate container E5; palletization follows DLA’s RP001 requirements. Marking must adhere to MIL-STD-129, with no special markings required, and bare item identification must conform to RQ017. Government markings on non-accepted items must be removed as per RQ011. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Hazardous materials must be labeled per 29 CFR 1910.1200 and declared in advance if radioactive, with specific activity thresholds triggering additional labeling and notification obligations. The contractor must comply with CMMC Level 2 self-assessment, safeguard covered contractor information systems under FAR 52.232-39 and NIST SP 800-171, and meet cybersecurity and data protection mandates including DFARS clauses on information disclosure and whistleblower rights. Invoicing must be processed through Wide Area WorkFlow, and payment terms include accelerated payments to small business subcontractors. The solicitation incorporates numerous FAR and DFARS clauses on equal opportunity, trafficking in persons, employment eligibility, sustainable products, and unenforceable obligations, along with representations required under SAM.gov for small business status, unique entity identifier, and CAGE code. Offerors must submit proposals via DIBBS by August 10, 2026, under a simplified acquisition process governed by the DLA Master Solicitation, and all technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
POST, BINDING, ELECTR
Solicitation # SPE4A7-26-T-642K
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of five electrical binding posts, identified by NSN 5940-01-467-5692. The contract requires delivery within 20 days after receipt of the order and is managed by the ASC Supplier Oper AE and AF Div. The place of performance is located in Keyport, Washington. The agreement is subject to several strict technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Notably, the contract involves technical data subject to ITAR or EAR export controls, meaning disclosure to foreign nationals is prohibited without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
DELAY LINE
Solicitation # SPE7M0-26-T-037Q
This solicitation, numbered SPE7M0-26-T-037Q, is issued by the Department of Defense Maritime Supply Chain ESOC Buys for the procurement of one Delay Line, identified by NSN 5999-01-112-0167 and Raytheon Company part number 1658335. The contract requires delivery within five days after order, with the final destination and inspection point located at Fort Hood, Texas. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-129, and requires a CMMC Level 2 self-assessment for cybersecurity. Additional compliance measures include the removal of government identification from non-accepted supplies and specific bare item marking. The original required delivery date is set for August 10, 2026.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4485
This contract specifies the procurement of three programmable power supplies, part number DLM40-15M9GM25 with NSN 6130-01-568-6551, under solicitation SPE7L7-26-T-4485, with delivery required within 200 days of award and a firm delivery date of February 27, 2027. All supplies must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130 for Item Unique Identification (IUID), and are subject to CMMC Level 2 self-assessment requirements for cybersecurity maturity. The item is designated as a critical application and must be packaged in accordance with ASTM D3951 and MIL-STD-129, with palletization following DLA packaging guidelines, and shipped FOB origin. Inspection and acceptance occur at the destination facility located at DDSP New Cumberland, Pennsylvania, with zero tolerance for variance in quantity. Sampling procedures must align with MIL-STD-1916 or approved zero-based plans, assigning verification levels based on critical, major, or minor attributes, and acceptance requires zero non-conformances unless otherwise stipulated. All labeling and marking must conform to government specifications, including physical identification per RQ017 and removal of government identifiers from non-accepted items.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335999
New
DIBBS
LUG, TERMINAL
Solicitation # SPE4A7-26-T-638J
This contract, identified as SPE4A7-26-T-638J, is for the procurement of six terminal lugs under NSN 5940-01-209-8477. The order is issued by the Department of Defense through the ASC Supplier Oper AE and AF Div, with a required delivery date of July 1, 2026, and a delivery window of five days after the order. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination, specifically the Portsmouth Naval Shipyard. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. All technical and quality requirements are governed by the DLA Master List, and shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CONNECTOR, PLUG, FIBE
Solicitation # SPE7M2-26-T-5867
This contract specifies the procurement of a fiber optic plug connector identified by NSN 6060016537640 and part number M28876/7B12S1, with a quantity of 31 units to be delivered FOB origin within 104 days, with no variance allowed in quantity. The item is subject to strict adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking code applied. All packaging and palletization must comply with DLA’s procurement requirements. The contract prohibits the intentional use of mercury or mercury compounds in the item unless explicitly exempted for functional components such as batteries, sensors, or weapons systems specified by NAVSEA, and requires secondary containment for portable mercury-containing devices. The use of class I ozone-depleting substances is strictly forbidden in manufacturing or testing unless written approval is obtained from the contracting officer. The item is sourced from a Qualified Products List or Qualified Manufacturers List and must conform to MIL-PRF-28876F Rev F as the governing technical specification. Sampling and inspection must follow MIL-STD-1916 or a comparable zero-based plan with acceptance criteria of zero non-conformances unless otherwise specified. All attributes are to be verified at levels VII, IV, and II for critical, major, and minor characteristics respectively. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the original required delivery date is August 25, 2027, with a need ship date of November 23, 2026. The contract is issued under solicitation SPE7M2-26-T-5867 by the Department of Defense’s Nuclear Reactor Program.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Flagging Services
All Other Support Services

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238120
New
DIBBS
Underground Utility Excavation and Backfill
Structural Steel and Precast Concrete Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238110
New
DIBBS
Concrete Formwork and Flatwork
Poured Concrete Foundation and Structure Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238290
New
DIBBS
Security and Access Control Systems
Other Building Equipment Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238120
New
DIBBS
Structural Steel Erection
Structural Steel and Precast Concrete Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 237990
New
DIBBS
Earthwork and Site Grading
Other Heavy and Civil Engineering Construction

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238110
New
DIBBS
Concrete and Foundation Work
Poured Concrete Foundation and Structure Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238220
New
DIBBS
Mechanical and Plumbing Systems
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-642E
This contract is for the procurement of 14 sleeve spacers under solicitation number SPE4A7-26-T-642E for the Department of Defense. The items must adhere to specific technical drawings and quality requirements, including the DLA Master List and various MIL-STD specifications for sampling, marking, and packaging. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan required unless otherwise specified. Delivery is set for 5 days after order, with the destination and acceptance point located at the Anniston Army Depot in Alabama. Shipping must be conducted via the fastest traceable means, excluding parcel post, and must comply with MIL-STD-129 and RP001 packaging requirements. The required delivery date is listed as April 16, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details