Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

MOUNTING BASE, TIEDO

Active
SPE4A7-26-T-584PFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 67 units of a mounting base designated as TIEDO, with part number 5975-01-583-8048, under solicitation SPE4A7-26-T-584P. The item is sourced from approved suppliers including Mouser Electronics, Lockheed Martin Corp, and Panduit Corp, with identical part numbers across vendors. Delivery is required FOB origin within 113 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E and DLA packaging requirements, including labeling per MIL-STD-129 without special markings. The unit of issue is each, priced at $67.00 per unit, totaling $4,489.00. The contract incorporates technical and quality standards referenced in the DLA Master List, requires compliance with CMMC Level 2 self-assessment, and mandates zero non-conformances under sampling protocols defined by MIL-STD-1916 or ASQ H1331 unless otherwise specified. Physical identification of the item must adhere to RQ017, and all government identifying information must be removed from non-accepted supplies per RQ011. The delivery destination is specified as the DLA Distribution Management Office in Albany, GA, with parcel post addressed to the MDMC Production Plant. The required delivery date is July 20, 2026, and the solicitation’s response deadline was July 29, 2026, with the posting date set for July 21, 2026.

General Info

Procure 67 TIEDO mounting bases at $67 each, deliver FOB origin by July 20, 2026, comply with MIL-STD and CMMC Level 2.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

444180 - Other Building Material DealersView NAICS

Place of Performance

814 RADFORD BVLD STE 20325, ALBANY, GA, 31704-0325, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-584P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Jamiah Sutton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
MOUNTING BASE,TIEDO
MOUNTING BASE,TIEDO
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MOUSER ELECTRONICS 0PTW8 P/N 644-ABMM-AT-C0
LOCKHEED MARTIN CORP 90536 P/N 79DH391-00
PANDUIT CORP. 06383 P/N ABMM-AT-C0
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A7-26-T-584P
SECTION B
PR: 7017570755 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017570755 0001 EA 67.000
NSN/MATERIAL:5975015838048
DELIVERY (IN DAYS):0113
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
S01FRC
COMMANDER
MDMC, PRODUCTION PLANT ALBANY
814 RADFORD BVLD STE 20325
ALBANY GA 31704-0325
US
FREIGHT SHIPPING ADDRESS:
S01FRC
DLA DISTRIBUTION MANAGEMENT OFFICE
WHSE 1331 6TH STREET
MDMC PPA/DLA RETAIL
ALBANY GA 31704-0325
US
Need Ship Date:00/00/0000 Original Required Delivery Date:07/20/2026
SPE4A7-26-T-584P NSN/Part Number: 5975-01-583-8048 Quantity: 67 EA Purchase Request: 7017570755QTY: 67 Delivery: 113 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 444180
New
DIBBS
FOUNTAIN, EYE AND FACEThe contract is for the procurement of 260 portable, self-contained eye and face wash stations manufactured by Bradley Corporation, part number S19-921, meeting ANSI Z358.1 standards. Each unit features gravity flow, an 8-ounce bottle of water preservative, and is designed to deliver a 15-minute flush with a 7-gallon capacity. The equipment must be counter or wall mounted and comply strictly with DLA packaging, marking, and shipping requirements under MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Mercury or mercury-containing compounds are prohibited from direct contact with the hardware except under specific exceptions for functional components like batteries or sensors, with additional containment rules for portable devices per NAVSEA 5100-003D. The product is identified by NSN 4240-01-234-1796, and delivery is required FOB origin within 28 days to the DDSP New Cumberland Facility in Pennsylvania, with a required ship date of April 24, 2026. The contract is subject to DLA’s Master List of Technical and Quality Requirements, and the solicitation is a total small business set-aside under NAICS code 444180, issued under contract number SPE8E6-26-T-3792 with a response deadline of August 3, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 444180
New
DIBBS
COIL, ELECTRICALThe contract is for one electrical coil identified by NSN 5950-01-543-6687 and part number 102867, issued under solicitation SPE7M1-26-T-221W to be delivered within 20 days from the required delivery date of July 20, 2026. The item is a critical application component with strict packaging requirements mandating compliance with DLA’s Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 guidelines. If the item is classified as hazardous under Fed-Std-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable but subject to higher-priority DLA standards. The unit of issue is one each, with zero variance allowed on quantity, and delivery is FOB origin with inspection and acceptance occurring at the destination. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and must be addressed to the USS SOMERSET LPD 25 at FPO AP 96678. The vendor is required to use the VSM system for freight shipments, and the contract includes specific government use codes and a primary point of contact at DLA. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under a federal procurement framework managed by the Department of Defense.
MARITIME SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 444180
New
Federal
42--FOUNTAIN,EYE AND FACE
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 12 days
View Details
NAICS: 444180
New
DIBBS
SPLICE, CONDUCTORThis contract is for the procurement of 155 units of a commercial off the shelf splice conductor with NSN 5940-01-552-9015 and part number D150-0321 from TE Connectivity Corporation. Delivery is required FOB origin within 171 days, with the original delivery date set for November 22, 2026 and a needed ship date of January 17, 2027. The contract specifies zero tolerance for quantity variance, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and fully adhere to MIL-STD-129 labeling and marking standards, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications from the DLA Master List take precedence over any other standard. The item is classified as a critical application item and is subject to cybersecurity requirements including CMMC Level 2 self-assessment and applies to covered defense information under RD002. Documentation for source approval must be submitted per RC001, and government identification must be removed from non-accepted supplies as per RQ011. The unit of issue is each, with a unit price of $155.000 and a total contract value of $24,025. Deliveries must be shipped to DLA Distribution Depot Hill at Hill AFB, Utah, with transportation governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A7-26-T-584R, issued on July 21, 2026, with responses due by July 29, 2026, under the Department of Defense’s ASC Supplier Oper AE and AF Division, with Hannah Leonard listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
MOUNTING BASE, TIEDOThe contract is for the procurement of 100 mounting bases, tiedo, identified by NSN 5975-01-583-8048, under solicitation SPE4A7-26-T-587J, with a required delivery within five days of award. The item must comply with strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the supplier must adhere to cybersecurity standards including CMMC Level 2 self-assessment, packaging standards set by MIL-STD-2073-1E and DLA packaging requirements, and marking requirements per MIL-STD-129 without any special marking codes. Sampling and inspection protocols follow MIL-STD-1916 or comparable zero-based methods, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The product must be delivered FOB origin, inspected and accepted at destination, and shipped by the fastest traceable means excluding parcel post to the designated distribution management office in Albany, Georgia, with no tolerance for quantity variance. Approved suppliers include Mouser Electronics, Lockheed Martin Corp, and Panduit Corp, each with their respective part numbers. The contract specifies the unit of issue as each, with total value based on a single unit price for the full quantity. Government use codes, freight shipping addresses, and logistical identifiers are embedded for internal tracking and compliance. The original required delivery date is July 16, 2026, and the solicitation was posted on July 21, 2026, with a response deadline of July 29, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
WIRING HARNESSThe contract pertains to the procurement of 19 wiring harnesses with NSN/Part Number 5995-01-579-3007 under solicitation SPE4A6-26-T-08VN, which is a total small business set-aside. Delivery is required within 261 days from award, and the place of performance is New Cumberland, PA, 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable standards referenced by R or I numbers, and the controlling revision depends on the acquisition size and timing of amendments. Sampling must align with MIL-STD-1916 or ASQ H1331 Table 1 using zero-based acceptance criteria unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes deemed major. Measuring and test equipment must be calibrated and compliant, and inspection and acceptance occur at the manufacturer’s origin. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, requiring prior authorization for any disclosure to foreign persons, regardless of location, and is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. Compliance with DFARS 252.225-7048 is mandatory, and removal of government identification from non-accepted supplies is required.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, RADIThis contract pertains to the procurement of 18 units of a radio frequency cable assembly, identified by NSN 5995-01-643-4309, under solicitation SPE4A6-26-T-08GD, with a delivery deadline of 171 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including cybersecurity compliance at CMMC Level 2, physical item marking, and quality conformance inspection. Technical data associated with the cable assembly is classified under export control regulations—either ITAR or EAR—and may not be disclosed or transferred to foreign persons or entities without explicit authorization from the Department of State or Commerce, with access restricted to contractors holding approved US/Canada Joint Certification Program status, completed DOD training, and DLA approval. A noted discrepancy exists in the part number for the coaxial cable referenced in the specification, where the listed item M17/75-RG213 should correctly be M17/74-RG213. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. The requirement applies to all parties including foreign subsidiaries and employees, governed by DFARS 252.225-7048, and the contract is issued by the Defense Logistics Agency’s Commodities Division under a federal procurement, with performance to be executed at New Cumberland, Pennsylvania. The solicitation opened on July 21, 2026, and responses are due by July 29, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, RADIO FThe contract is for a single radio frequency cable assembly with NSN 5995-01-643-5648, requiring delivery within 148 days after order date. It incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with applicable revisions based on solicitation or award timelines. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked according to bare item marking rules. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; attributes are categorized as critical, major, or minor with corresponding verification levels or AQLs. The product is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, whether in the U.S. or abroad, with DFARS 252.225-7048 applying. Access to controlled technical data is restricted to DLA contractors with approved U.S./Canada Joint Certification Program status who have completed required DLA training and questionnaires. Cybersecurity compliance requires a CMMC Level 2 self-assessment and certification by a C3PAO. Item unique identification is not required per the service customer’s directive. The solicitation was issued under SPE4A6-26-T-08EJ with a response deadline of July 29, 2026, and performance is due to be delivered to Albany, Georgia.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, RADIThe contract pertains to the procurement of a single unit of a cable assembly designated by NSN 5995-01-643-5648, with a required delivery within five days of order award. The item is governed by a suite of technical, quality, and compliance requirements referenced from the DLA Master List of Technical and Quality Requirements, which include packaging standards, removal of government identification from non-accepted supplies, bare item marking protocols, and specific sampling procedures aligned with MIL-STD-1916 or equivalent zero-based plans. Attributes are to be classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major unless otherwise defined. The contract mandates adherence to Cybersecurity Maturity Model Certification (CMMC) Level 2, requiring either a self-assessment or certification by an accredited third-party assessor. Export control restrictions apply to technical data associated with the item, subject to ITAR or EAR, prohibiting unauthorized disclosure to foreign persons within or outside the U.S., and restricting access to only DLA-approved contractors with JCP certification, completed export control training, and approved questionnaire responses. DFARS clauses govern data handling and export compliance. Item Unique Identification is explicitly waived per the service customer’s request. The contract was solicited under SPE4A6-26-T-08UT, posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to Camp Pendleton, CA. The responsible point of contact is Shenika Thompson of the ASC Commodities Division within the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPECIALThis contract specifies the procurement of a special-purpose electrical cable assembly under solicitation SPE4A6-26-T-08FU, with a required delivery of five units to be shipped FOB origin within 171 days. The item is identified by NSN 5995-01-642-6005 and is furnished by Glenair Inc. and Electric Boat Corporation under their respective part numbers. All supplies must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and configuration changes must be managed through formal engineering change proposals or variance requests. The contract prohibits the intentional use of mercury or mercury-containing compounds in the product, preservation, packaging, or marking, except for specific exempted applications such as batteries, fluorescent lights in portable instruments, and certain weapon systems, which must include a secondary containment boundary in accordance with NAVSEA 5100-003D. Packaging must strictly adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and all attributes not explicitly defined are treated as major. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point. The purchase request is 7017571701, with no variance in quantity permitted, and the required ship date is January 17, 2027, with an original delivery deadline of May 26, 2027.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 444180
New
DIBBS
HARNESS ASSY, AIRCRAThe contract pertains to the procurement of two aircraft harness assemblies with NSN 5935-20-005-7155 under solicitation SPE4A5-26-T-296D, with a delivery deadline of 545 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless amended. Documentation requirements include submission of a complete data package for both the approved and alternate parts, adherence to configuration change management through engineering change proposals, and compliance with DLA packaging standards. The harness assemblies must be physically marked in accordance with RQ017, and any government identification on non-accepted supplies must be removed as stipulated by RQ011. Source approval requests and variance or waiver requests must be properly documented. The point of contact is Evgeny Korovin, and performance is to occur in Tracy, California, 95304-5000, with responses due by July 28, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to a special cable assembly with the NSN 5995-01-632-0482 and a quantity of three units, under purchase request 7017529291. The item is classified as export-controlled technical data subject to either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning its disclosure to foreign persons—or even U.S. entities with foreign ownership or subsidiaries—requires prior authorization from the Department of State or Commerce. Access to this technical data is restricted strictly to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. Distribution and handling of the data must comply with DFARS 252.225-7048. The solicitation number is SPE4A6-26-T-07FV, posted on July 16, 2026, with responses due by July 24, 2026. The place of performance is New Cumberland, Pennsylvania, with a delivery timeline of 337 days after order. The contracting office is the ASC Commodities Division under the Department of Defense, and the point of contact is Thanh Hue Nguyen, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

6 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
LINER, ACTUATORThe contract pertains to the procurement of LINER, ACTUATOR with part number 292340, sourced from Linear Motion LLC, and also includes alternate suppliers Ontic Engineering & Manufacturing Inc and Mistequay Group Ltd with part number CA67818-001. The item is designated as a critical application item and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any other referenced standards. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and applies specific verification levels and AQLs for critical, major, and minor attributes. Configuration changes require formal engineering change proposals or variance requests, and all non-accepted supplies must have government identification removed prior to return. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001, and all items must be clearly marked as per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 170-day delivery window, and the quantity is fixed at 14 units with no variance permitted. The unit price is $14.00, totaling $196.00, and the NSN is 1680-00-492-0817. The required delivery date is September 22, 2027, with a need ship date of January 17, 2027. All shipments must be routed to DLA Distribution Depot Hill at Hill AFB, Utah, following DLAD procedural notes C19 and C20 for transportation and first destination logistics.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLICThe contract is for the procurement of 2 nonmetallic grommets with NSN 5325-01-481-1737 and part number 863-000613, issued under solicitation SPE4A7-26-T-590K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of award, FOB origin, with no quantity variance permitted, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with precedence given to the DLA Master List of Technical and Quality Requirements over ASTM standards. The unit of issue is each, with a fixed price of $2.00 per unit, totaling $4.00. Packaging must follow RP001 DLA packaging requirements and be palletized accordingly. Shipments must be sent via traceable freight, explicitly prohibiting parcel post, and delivered to the specified military logistics address at March ARB, CA. The required delivery date is July 16, 2026, and the contract references applicable technical and quality standards identified by R or I numbers from the DLA Master List. The responsible point of contact is Naron Sanderlin, with additional government-use codes and identifiers provided for tracking and disposition.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARDThe contract specifies the procurement of a Terminal Board with NSN 5940-01-428-2634 and part number CC-1032-12 from Cornell-Carr Co., Inc., requiring one unit to be delivered within 20 days FOB destination. All supplies must comply with DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required and packaging in accordance with MIL-STD-2073-1E using preservation method 10 and unit container D3. The item is designated as a critical application item, and zero tolerance for quantity variance applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with acceptance criteria of zero non-conformances, unless otherwise specified; critical, major, and minor attributes are to be assigned verification levels VII, IV, II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Delivery is to be shipped via the fastest traceable means, not parcel post, to the FPO AE 09576 address, with shipping details tied to RDD 777 and project code HJ5 TP 2. The contract incorporates technical and quality requirements from the DLA Master List via RP001, RA001, RC001, RQ011, and RQ017, and applies to simplified acquisition procedures with the revision in effect on the solicitation issue date governing compliance. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, under contract number SPE4A7-26-T-590J, and the original required delivery date is July 16, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract is for the procurement of 63 units of a spacer sleeve identified by NSN 5365-00-061-8248 and part number NAS43HT6-24, manufactured in accordance with NAS43 Revision 12 dated 11/30/2012. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951. Inspection and acceptance are to occur at origin, with sampling conducted under MIL-STD-1916 or an equivalent zero-based sampling plan, and zero non-conformances required unless otherwise specified. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and unspecified attributes are treated as major. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization following those same standards. The item is designated as a critical application item and must be marked and labeled per RQ017. Delivery is FOB origin with no variance permitted in quantity, and the required delivery date is 107 days from contract award, with an original deadline of February 17, 2027 and a needed ship date of November 15, 2026. The delivery address is DLA Distribution Jacksonville, and all transportation instructions must follow DLAD Proc Notes C19 and C20. The contract number is SPE4A7-26-T-590S, issued as a federal solicitation under NAICS code 332510, with procurement initiated through Purchase Request 7016845196.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION BThis contract pertains to the procurement of a commercial off the shelf item identified by NSN 5940011855550 and part number 592840-1 from TE Connectivity Corporation, with a requirement for 159 units to be delivered FOB origin within 37 days of award. The delivery point is Jacksonville, Florida, with inspection and acceptance occurring at destination, and no tolerance is permitted for quantity variance. Packaging must comply with ASTM D3951 and all applicable DLA Master List of Technical and Quality Requirements, which take precedence, including mandatory adherence to MIL-STD-129 for marking and labeling. Palletization must follow RP001 guidelines, and the unit of issue is each, with packaging and quantity per unit pack strictly as specified. The item is marked as a critical application item, requiring adherence to documentation standards for source approval. The contract reference is SPE4A7-26-T-590V, issued under a federal solicitation with a response deadline of July 30, 2026, and the original delivery requirement was July 9, 2026, with a needed ship date of September 6, 2026. Transportation and freight details are governed by DLAD procedural notes C19 and C20, with the delivery address specified for DLA Distribution Jacksonville, and primary point of contact is Lexus Henry, reachable via provided phone and email.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADED
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
SPLICE, CONDUCTORThe contract is for the procurement of 969 units of SPLICE, CONDUCTOR with NSN 5940-00-177-2604 under solicitation SPE4A7-26-T-590P, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 135 days of award, and responses must be submitted by July 30, 2026. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 certification for the offering organization as a certified third-party assessment organization. Physical identification and bare item marking standards apply, and government identification must be removed from non-accepted supplies. The contract incorporates tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, with inspection and acceptance permitted at the origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 governs compliance. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal approval from DLA. Packaging must adhere to DLA standards, and all performance is designated to occur at Hill AFB, Utah.
Current-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, REACTION, IGNThe contract pertains to the procurement of two SPACER, REACTION, IGN units under NSN 5365-01-230-3095, with a delivery requirement of 20 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export controls under ITAR or EAR, restricting the dissemination of associated technical data to unauthorized foreign persons or entities regardless of location, and requires compliance with DFARS 252.225-7048. Only contractors with approved JCP certification, completed DOD export control training, and DLA authorization may access this controlled data. Additional quality controls include tailored higher-level requirements, inspection and acceptance at origin, and mandatory removal of government identification from non-accepted supplies. Packaging must adhere to DLA standards, and covered defense information applies to this contract. The solicitation number is SPE4A7-26-T-590E, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, with responses due by July 30, 2026. Primary point of contact is Christian Roberson, reachable via email and phone provided.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BLANKET, SOUND CONTRThe contract is for one unit of a sound-controlling blanket designated for aircraft use, with the NSN/Part Number 1680-01-115-7104, under purchase request 7017589386, with delivery required within five days after delivery order. The item includes technical data subject to export control under either the International Traffic in Arms Regulations or the Export Administration Regulations, meaning any disclosure or transfer to foreign persons, regardless of location, requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and access is restricted strictly to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on proper handling of DOD export-controlled technical data, and have passed the DLA Export-Controlled Technical Data Questionnaire. Distribution of the technical data is further limited to those approved by the DLA controlling authority. The solicitation number is SPE4A7-26-T-590N, posted on July 22, 2026, with responses due by July 30, 2026, under NAICS code 336413, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with the place of performance listed as New Cumberland, PA, 17070. The primary point of contact is Nya Currie, reachable by phone and email provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER STANDBY CART
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
PARTS KIT, SEAL REPL

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELE
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details